-
Sony TC-SD1 - page 1
3-864-773- 11 (1) ©1998 by Sony Corporation TC-SD1 Ster eo Cassette Deck Operating Instructions ...
-
Sony TC-SD1 - page 2
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. IMPORTANT: Never connect two mains leads into a single mains plug. – For T ...
-
Sony TC-SD1 - page 3
EN 3 The TC-SD1 tape deck is designed only for the CMT-SD1/SD3 and MDS-SD1 component system Here are some of the features you can use with this tape deck when connected with the CMT-SD1/SD3 compact Hi-Fi component system (see page 4). The MDS-SD1 is also available (see page 4). Refer to “Recording manually” (page 9) to record from an MD to a ta ...
-
Sony TC-SD1 - page 4
4 5 3 4 1 2 5 4 3 1 2 Hooking up the system Complete steps 1 through 3 ( 1 through 4 for CMT-SD3) to hook up your system using the supplied cords. The front panel is made of tempered glass. Please remember to handle this unit carefully. TC-SD1 MDS-SD1 CMT-SD1/SD3 (CMT-SD3 only) TC-SD1 For the customers using ...
-
Sony TC-SD1 - page 5
5 ç ç 1 Firmly connect the system cable to the SYSTEM CONTROL jack on the CMT-SD1/SD3. When using the MDS-SD1, connect to the SYSTEM CONTROL jack on the MDS-SD1. 3 For CMT-SD3, reconnect the Mains lead of the super woofer to the unswitched AC OUTLET on the TC-SD1. 4 Connect the Mains lead of the TC- SD1 to the AC OUTLET on the CMT-SD1/SD3. ...
-
Sony TC-SD1 - page 6
6 Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO 2 ) or TYPE IV (metal), since the tape deck automatically detects the tape type (ATS 1) ). 1) ATS: Automatic Tape Selection. With the side you want to play facing up FUNCTION 0 / ) 2) This tape deck is able to switch between Dolby B- type and C-type noise reduction systems ...
-
Sony TC-SD1 - page 7
7 To Stop playing Pause Fast-forward Rewind Find the succeeding track (AMS**) Find the preceding track (AMS**) Remove the cassette Adjust the volume Press π (or p *). ∏ (or P *). Press again to resume playing. π , then ) (or ) *) for the top side. π , then 0 (or 0 *) for the bottom side. π , then 0 (or 0 *) for the top side. π , then ) (or ) ...
-
Sony TC-SD1 - page 8
8 Recor ding a CD — CD Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal), TYPE II (CrO 2 ), or TYPE IV (metal) tape, since the tape deck automatically detects the tape type. 2 Press § on the tape deck to open the cassette tray and insert a blank tape. Press § again to close the cassette ...
-
Sony TC-SD1 - page 9
9 7 Press ∏ on the tape deck. Recording starts. To stop recording Press π on the tape deck or p on the remote. Tips • When you press 1 / u on the tape deck while the CMT-SD1/SD3 is power on, only the tape deck turns on/off. Press 1 / u on the CMT-SD1/SD3 to turn on the CMT-SD1/SD3 component system. • The TAPE indicator lights up in red when ...
-
Sony TC-SD1 - page 10
10 To Stop recording Pause recording 2 Press § on the tape deck to open the cassette tray and insert a blank tape. Press § again to close the cassette tray. 3 Press FUNCTION on the CMT-SD1/SD3 until the source you want to record (such as “TUNER” or “AUX*”) appears in the display. When recording from CD or MD, select the track you wish to ...
-
Sony TC-SD1 - page 11
11 Tips • The TAPE indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted. • When you want to reduce the hiss noise in low- level high-frequency signals, set DOLBY NR to “B” or “C” before step 5. Switching DOLBY NR while recording will cause the newly recorded sound to differ in quality from the ...
-
Sony TC-SD1 - page 12
12 7 Press § on the tape deck to open the cassette tray and insert a blank tape. Press § again to close the cassette tray. 8 Press 1 / u on the CMT-SD1/SD3 to turn off the system. The tape deck is now ready for the timer recording. The power turns on automatically at the start time, the recorging starts, then the power turns off at the stop time. ...
-
Sony TC-SD1 - page 13
13 To cancel timer recording Press TIMER SET. To change the setting Start again from step 1. To check the setting / To use the timer Press TIMER SELECT repeatedly until “REC” appears. The start time appears, followed by the stop time, the preset number, and “TAPE”, then the original display appears. Press 1/u on the CMT-SD1/SD3 to turn off ...
-
Sony TC-SD1 - page 14
14 Cleaning the tape heads Clean the tape heads after every 10 hours of use. When the tape heads become dirty — the sound is distorted — there is a decrease in sound level — the sound drops out — the tape does not erase completely — the tape does not record. Be sure to clean the tape heads before you start an important recording or after ...
-
Sony TC-SD1 - page 15
15 T r oubleshooting If you run into any problem using this tape deck, use the following checklist. First, check that the mains lead is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer. The cassette tray does not close. • Turn on the power again, and close the casse ...
-
Sony TC-SD1 - page 16
16 Sony Corporation Printed in China Specifications Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 30 – 14,000 Hz (±3 dB), using Sony TYPE I cassettes 30 – 15,000 Hz (±3 dB), using Sony TYPE II cassettes 30 – 15,000 Hz (±3 dB), using Sony TYPE IV cassettes Wow and flutter ±0.13% W. Peak (IEC) 0.07% W. RMS (NAB ...
Do you have a question concerning Sony TC-SD1?
Use the form below
If you did not solve your problem by using a manual Sony TC-SD1, ask a question using the form below. If a user had a similar problem with Sony TC-SD1 it is likely that he will want to share the way to solve it.