English dropdown-ico

Manual Siemens MAG 5100 W

32 pages 1.72 mb
Download

Go to site of 32

Summary
  • Siemens MAG 5100 W - page 1

    INSTRUCTIONS SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W ENGLISH 083R9166 SFIDK.PI.026.V1.52 Siemens Flow Instrum ents SITRANS F M MAGFLO  electromagnetic flowmeters consist of a sensor and a transmitter. These instructions only describe the sensor installation. For further information on the transmitter inst ...

  • Siemens MAG 5100 W - page 2

    2 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W mm inch kgs lbs kgs lbs kgs lbs kgs lbs kgs lbs 25 1" N/A N/A N/A N/A 4 9 4 9 N/A N/A 40 1½" N/A N/A N/A N/A 7 15 6 13 N/A N/A 50 2" N/A N/A 9 20 N/A N/A 8 20 N/A N/A 65 2½" N/A N/A 10.7 24 N/A N/A 11 24 N/A N/A 80 3" N/A N/A 11.6 26 N/A N/ ...

  • Siemens MAG 5100 W - page 3

    3 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W Installation, general Reading and operating the flowmeter is possi- ble under almost any installation conditions because the display can be oriented in relation to the se nsor. To ensure optimum flow mea- surement attention should be paid to the follow- ing: The sens ...

  • Siemens MAG 5100 W - page 4

    4 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W Installation in horizontal pipes The sensor must be mounted as shown in the upper figure. Do not mount the sensor as shown in the lower figure. This will position the elec- trodes at the top where there is possibility for air bubbles and at the bottom where there is ...

  • Siemens MAG 5100 W - page 5

    5 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W Potential equalisation Potential equalisation is carried out with the built-in earthing electrodes. Special attention must be given to systems with cathodic protection. By compact mounting: The transmitter must be supplied through an isolation transformer. The termin ...

  • Siemens MAG 5100 W - page 6

    6 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W mm inch Nm f/lbs Nm f/lbs Nm f/lbs Nm f/lbs Nm f/lbs 25 1" N/A N/A N/A N/A 10 7 7 5 N/A N/A 40 1½" N/A N/A N/A N/A 16 12 9 7 N/A N/A 50 2" N/A N/A 25 18 N/A N/A 25 18 N/A N/A 65 2½" N/A N/A 25 18 N/A N/A 25 18 N/A N/A 80 3" N/A N/A 25 18 N/ ...

  • Siemens MAG 5100 W - page 7

    7 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W Flange mating dimen- sions (Metric) Dimensions mm Bolting mm O D PCD T B Hole s Bol ts PN 10 200 340 295 24 22 8 M20 250 395 350 26 22 12 M20 300 445 400 26 22 12 M20 350 505 460 28 22 16 M20 400 565 515 32 26 16 M24 450 615 565 36 26 20 M24 500 670 620 38 26 20 M24 ...

  • Siemens MAG 5100 W - page 8

    8 SITRANS F M MAGFLO      Electromagnetic flowmeter type MAG 5100 W 1. Responsibility for the choice of lining and electrode materials with regard to their abrasion and corrosion resistance lies with the purchaser; the effect of any change in process medium during the operating life of the flowmeter should be taken into account. Inco ...

  • Siemens MAG 5100 W - page 9

    INSTRUCTIONS SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W DEUTSCH 083R9166 SFIDK.PI.026.V1.52 Siemens Flow Instrum ents SITRANS F M MAGFLO  magnetisch-induktive Durchflussmesser bestehen aus einem Messaufnehmer und einem Messumformer. Diese Instruktion beschreibt nur die Montage des Messaufnehmers. ...

  • Siemens MAG 5100 W - page 10

    10 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W m m Z o l l k g l bk g l bk g l bk g l bk g l b 2 5 1 " - - -- 4 9 4 9 -- 40 1 ½" - - - - 7 15 6 13 - - 50 2" - - 9 20 - - 8 20 - - 65 2½ " - - 10,7 24 - - 11 24 - - 80 3" - - 11,6 26 - - 1 3 28 - - 100 4 " - - 15,2 33 - - ...

  • Siemens MAG 5100 W - page 11

    11 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W Einbau, allgemein Der Durchflussmesser kann in jeder Einbau- lage abgelesen werden, da die Anzeige dreh- bar ist und in jeder beliebigen Position im Verhältnis zum Messaufnehmer eingebaut wer- den kann. Die endgültige Position sollte vor der Montage fe ...

  • Siemens MAG 5100 W - page 12

    12 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W Einbau in einer waagerechten Rohrleitung Der Messaufnehmer ist wie nebenstehend in der oberen Abbildung gezeigt zu montieren. Wegen der Lage der Elektroden oben (hier können Luftblasen entstehen) und unten (even- tuelle Ansammlung von Schlamm, Sand usw. ...

  • Siemens MAG 5100 W - page 13

    13 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W Potentialausgleich Potentialausgleich erfolgt mit den eingebauten Erdungselektroden. Bei Rohrleitungen mit katodischem Schutz ist besondere Sorgfalt geboten. Bei kompaktem Einbau: Der Messumformer muss über einen Trenn- transformator gespeist werden. De ...

  • Siemens MAG 5100 W - page 14

    14 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W mm Zoll N m f/lb N m f/lb N m f/lb N m f/lb N m f/lb 25 1" - - - - 10 7 7 5 - - 40 1½" - - - - 16 12 9 7 - - 50 2" - - 25 18 - - 25 18 - - 6 5 2 ½ " - -2 5 1 8- -2 5 1 8 - - 80 3" - - 25 18 - - 34 25 - - 100 4" - - 25 18 - ...

  • Siemens MAG 5100 W - page 15

    15 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W Flansch- Anpassungsmaße (Metrisch) Abmessungen mm Verschraubung m m O D PCD T B Löcher Bo lze n PN 10 200 340 295 24 22 8 M20 250 395 350 26 22 12 M20 300 445 400 26 22 12 M20 350 505 460 28 22 16 M20 400 565 515 32 26 16 M24 450 615 565 36 26 20 M24 5 ...

  • Siemens MAG 5100 W - page 16

    16 SITRANS F M MAGFLO      Magnetisch-induktiver Durchflussmesser Typ MAG 5100 W 1. Die Verantwortung für die Wahl der Auskleidungs- und Elektrodenwerkstoffe hinsichtich ihrer Abrieb- und Korrosionsfestigkeit trägt der Käufer; die Auswirkung jeglicher Änderung im Prozessmedium während der Betriebs-Lebensdauer des Durchflussmesse ...

  • Siemens MAG 5100 W - page 17

    INSTRUCTIONS SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W FRANÇAIS 083R9166 SFIDK.PI.026.V1.52 Le débitmètre à induction magnétique SITRANS FM MAGFLO  de Siemens Flow Instruments se compose d'une tête de mesure et d'un convertisseur de signaux. Cette instruction concerne le montage ...

  • Siemens MAG 5100 W - page 18

    18 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W Poids mm Pouce k g l b k g lb kg l b k g l b k g lb 25 1" - - - - 4 9 4 9 - - 40 1 ½" - - - - 7 15 6 13 - - 50 2" - - 9 20 - - 8 20 - - 6 5 2 ½ " - - 1 0 , 7 2 4- - 1 1 2 4- - 8 0 3 " - - 1 1 , 6 2 6- - 1 3 2 8- - 1 0 04 " ...

  • Siemens MAG 5100 W - page 19

    19 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W Installation générales Il est possible de lire et d’utiliser le débitmètre dans la plupart des conditions d’installation l’afficheur pouvant être orienté par rapport à la tête de mesure. Pour obtenir des mesures de débit optimales, respect ...

  • Siemens MAG 5100 W - page 20

    20 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W Montage sur conduites horizontales La tête de mesure doit être montée conformé- ment à la figure du haut. Eviter le montage de la figure du bas les électrodes étant situées dans la partie supérieure, où des bulles d’air peuvent se former, et ...

  • Siemens MAG 5100 W - page 21

    21 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W Compensation de potentiel L'égalisation de potentiel se fait par les élec- trodes de mise à la terre intégrées. Les tuyauteries à protection cathodique font l’objet de dispositions particulières. Montage compact: Le convertisseur de signaux ...

  • Siemens MAG 5100 W - page 22

    22 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W Couples maxima admissibles Utiliser des boulons standards: les graisser convenablement et les serrer de facon égale tout autour des faces de contact des joints. Les boulons trop serrés ou serrés de fa ς on inégale risquent d'occasionner des fui ...

  • Siemens MAG 5100 W - page 23

    23 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W Dimensions correspondant aux brides (Métriques) Dimensions mm Boulonnage m m O D PCD T B Tr ous Boulons PN 10 200 340 295 24 22 8 M20 250 395 350 26 22 12 M20 300 445 400 26 22 12 M20 350 505 460 28 22 16 M20 400 565 515 32 26 16 M24 450 615 565 36 26 2 ...

  • Siemens MAG 5100 W - page 24

    24 SITRANS F M MAGFLO      Débitmètre à induction magnétique type MAG 5100 W 1. L’acheteur est responsable pour le choix des matériaux de revêtement et d‘électrode à l’égard de leur résistance à l’usure et à la corrosion; il faut tenir compte de l’effet de tout changement dans le fluide de procès pendant la dur ...

  • Siemens MAG 5100 W - page 25

    INSTRUCTIONS SITRANS F M MAGFLO      Magnetisk induktiv flowmåler type MAG 5100 W DANSK 083R9166 SFIDK.PI.026.V1.52 Siemens Flow Instruments SITRANS F M MAGFLO  magnetisk induktive flowmålere består af et målehoved og en transmitter. Denne instruktion omhandler installation af målehovedet. For yderligere vejledning om install ...

  • Siemens MAG 5100 W - page 26

    26 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W Vægt mm inch k gs lbs k g s lbs k g s lbs k g s lbs k gs lbs 2 5 1 " - - -- 4 9 4 9 -- 40 1 ½" - - - - 7 15 6 13 - - 50 2" - - 9 20 - - 8 20 - - 65 2½ " - - 10,7 24 - - 11 24 - - 80 3" - - 11,6 26 - - 1 3 28 - - 100 4 " - - 15,2 33 - - 19 ...

  • Siemens MAG 5100 W - page 27

    27 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W Installation, generelt Flowmåleren kan aflæses og betjenes under så at sige alle indbygningsforhold, idet dis- playet kan drejes i forhold til målehovedet. For at sikre optimal flowmåling bør man være opmærksom på følgende: Målehovedet skal altid være fuldst? ...

  • Siemens MAG 5100 W - page 28

    28 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W Montage i vandrette rør Målehovedet monteres som vist på den øver- ste figur. Målehovedet må ikke monteres som vist på den nederste figur af hensyn til elektrodernes placering øverst, hvor der er mulighed for luftbobler, og nederst, hvor der er mulighed for mudde ...

  • Siemens MAG 5100 W - page 29

    29 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W Potentialeudligning Potentialeudligning udføres med indbyggede jordingselektroder. Ved rørsystemer med katodisk beskyttelse skal der tages særlige hensyn. Kompakt montering: Transmitteren skal strømforsynes via en skille- transformator. "PE"-klemmen må ikk ...

  • Siemens MAG 5100 W - page 30

    30 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W Tilspænding Standardbolte skal være velsmurte og spændes jævnt rundt omkring pakfladen. For stor eller "skæv" tilspænding kan forårsage utætheder/ skader på flowmåler og rørsystem. mm inch Nm f/lbs N m f/lbs Nm f/lbs N m f/lbs Nm f/lbs 25 1" - - ...

  • Siemens MAG 5100 W - page 31

    31 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W Flange dimensioner (metrisk) Må l mm Bolte m m O D PCD T B Hul Dia. PN 10 200 340 295 24 22 8 M20 250 395 350 26 22 12 M20 300 445 400 26 22 12 M20 350 505 460 28 22 16 M20 400 565 515 32 26 16 M24 450 615 565 36 26 20 M24 500 670 620 38 26 20 M24 600 780 725 42 30 20 M ...

  • Siemens MAG 5100 W - page 32

    32 SITRANS F M MAGFLO      Magnetisk flowmåler type MAG 5100 W 1. Ansvaret for den valgte lining og elektrode materiales holdbarhed overfor slitage og korrossion påhviler køber; indflydelse fra evt. ændring i mediesammensætning på et vilkårligt tidspunkt i produktets levetid skal herunder tages i betragtning. Forkert valg af l ...

Manufacturer Siemens Category Automobile Parts

Documents that we receive from a manufacturer of a Siemens MAG 5100 W can be divided into several groups. They are, among others:
- Siemens technical drawings
- MAG 5100 W manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens MAG 5100 W
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens MAG 5100 W.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens MAG 5100 W, service manual, brief instructions and user manuals Siemens MAG 5100 W. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens MAG 5100 W.

Similar manuals

A complete manual for the device Siemens MAG 5100 W, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens MAG 5100 W by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens MAG 5100 W.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens MAG 5100 W - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens MAG 5100 W, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens MAG 5100 W, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens MAG 5100 W - which should help us in our first steps of using Siemens MAG 5100 W
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens MAG 5100 W
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens MAG 5100 W in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens MAG 5100 W?

Use the form below

If you did not solve your problem by using a manual Siemens MAG 5100 W, ask a question using the form below. If a user had a similar problem with Siemens MAG 5100 W it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)