English dropdown-ico

Manual TP-Link TL-WR1042ND

27 pages 1.82 mb
Download

Go to site of 27

Summary
  • TP-Link TL-WR1042ND - page 1

    Configuration and Access of FTP Server TL-WR1042ND TL-WR1043ND TL-WR2543ND TL-WR842ND This guide applies to all the models above. Rev: 1.0.0 1910010521 ...

  • TP-Link TL-WR1042ND - page 2

    CONTENTS Chapter 1. T opology and US B Devi ce ................................................................. 2 1.1 T ypical T opology ......................................................................................................... 2 1.2 S pecial T opology ................................................................................. ...

  • TP-Link TL-WR1042ND - page 3

    Application Guide - 2 - Chapter 1. Topology and USB Device 1.1 Ty p i c a l To p o l o g y Figure 1-1 T ypical T opology ) Note: 1. USB Flash Device stands for FTP Server in this topology. 2. Lo cal PC here means the PC t hat is in the same subnet with the FTP Sever. Local PC ca n access the FTP Server by LAN (Local Area Network), which is called L ...

  • TP-Link TL-WR1042ND - page 4

    Application Guide - 3 - 1.2 S pecial T opology Figure 1-2 S pecial T opology ) Note: The W A N port of TL-WR1043ND is linked to the LAN port of an xDSL modem. If the modem has already obtained a public IP by dialing to the Internet with the username and password provided from your ISP and TL-WR1043ND obtains it s IP through Dynamic IP service provi ...

  • TP-Link TL-WR1042ND - page 5

    Application Guide - 4 - Chapter 2. Configuration of the Wireless Router To set up your FTP Server, please follow the instructions below: 1. Make sure you have a PC connected to the wire less router, either through wireless con nection or wired connection. 2. Plug an external USB hard disk drive or USB fl ash drive into the USB port on the back pane ...

  • TP-Link TL-WR1042ND - page 6

    Application Guide - 5 - 5. Go to USB Settings -> FTP Server , the screen will appear as shown in Figure 2-3 . The IP behind Internet Address would be us ed to access the FTP server. Figure 2-3 FTP Server Configuration 6. Select the Enable box to enable Internet Access to FTP from WAN port. 7. Specify a Service Port fo r FTP Server. (The default ...

  • TP-Link TL-WR1042ND - page 7

    Application Guide - 6 - 10. Select the Share entire partition or a specific folder option. If you select Share entire partition , the folders contained in this partition will all be shared. Figure 2-4 Add or Modify Share Folder 11. Click the Save button to save the settings and the screen will appear as shown in the figure below. Figure 2-5 Click S ...

  • TP-Link TL-WR1042ND - page 8

    Application Guide - 7 - ) Note: 1. The max share folders number is 10. If you want to share a new folder when the number h as reached 10, you can delete an existing s hare folder and then a dd a new one. 2. The change of the FTP settings will not take e ffect until the FTP Server is restarted. 3. Currently, there is quantitative re striction of FTP ...

  • TP-Link TL-WR1042ND - page 9

    Application Guide - 8 - Chapter 3. Access via Web Browser Here we take the W eb browser Internet Explorer for example. 3.1 W AN Access 1. Input the Internet Address in IE address field. (The address can be found on FTP Server page as shown in Figure 3-2 . Here is f tp://218.18.0.163 .). Figure 3-1 Input Internet Address Figure 3-2 Internet Address ...

  • TP-Link TL-WR1042ND - page 10

    Application Guide - 9 - Figure 3-3 Log On 3. Now you can see the IE as Figure 3-4 . Double-click the folder TP-LINK . Figure 3-4 ...

  • TP-Link TL-WR1042ND - page 11

    Application Guide - 10 - 4. Y ou will see the files contained in TP-LINK as below . Figure 3-5 5. T o open a folder , right click the folder , for example tplink02 , and select Open option. T o download a file, right click the file, for exampl e test03.doc , and select Copy option. Figure 3-6 ...

  • TP-Link TL-WR1042ND - page 12

    Application Guide - 1 1 - Figure 3-7 ) Note: When trying to open a file by double-clicking the file, an error will occur as shown in Figure 3-8 . We recommend that you use Copy and Paste method to download the file on FTP Server. Figure 3-8 ...

  • TP-Link TL-WR1042ND - page 13

    Application Guide - 12 - 3.2 LAN Access 1. Go to Sta r t- > Run , input cmd as below , then click OK or press Enter key . Figure 3-9 2. Y ou will see the interface as below . Figure 3-10 3. Input ipconfig , and press Enter key . Write down the IP address behind Default Gateway as shown in Figure 3-1 1 . (Here is 192.168.0.1). ...

  • TP-Link TL-WR1042ND - page 14

    Application Guide - 13 - Figure 3-1 1 4. Input the address (The address written down in S tep 3. Here is192.168.0.1) in IE address field in format of ftp://192.168.0.1 and then press Enter key , Figure 3-12 A login window will pop up as below . Enter the Us er name and Password of the wireless router (default username: admin , default password: adm ...

  • TP-Link TL-WR1042ND - page 15

    Application Guide - 14 - Figure 3-13 5. Now you can see the IE as below , double-click the folder TP-LINK . Figure 3-14 ...

  • TP-Link TL-WR1042ND - page 16

    Application Guide - 15 - 6. Y ou will see the files contained in TP-LINK as below: Figure 3-15 7. T o open a folder , right click the folder , for example tplink02 , and select Open option. T o download a file, right click the file, for exampl e test03.doc , and select Copy option. Figure 3-16 ...

  • TP-Link TL-WR1042ND - page 17

    Application Guide - 16 - Figure 3-17 ) Note: When trying to open the file by double-clicki ng the file, an error will occur as shown in Figure 3-1 8 . We recommend that you use Copy and Paste method to download the file on FTP Server. Figure 3-18 ...

  • TP-Link TL-WR1042ND - page 18

    Application Guide - 17 - Chapter 4. Access via PC Client Software Here we take CuteFTP Professional 8 for example. 4.1 W AN Access 1. Open the CuteFTP and it will show as below . Figure 4-1 ...

  • TP-Link TL-WR1042ND - page 19

    Application Guide - 18 - 2. Go to File -> New -> FTP Site or press Ctrl+N to open a new Site properties . Figure 4-2 3. Set the dialog box as below and click Connect . Label: Name of the site. Host address: The Internet Address of FTP Server configuration page (Here is 218.18.0.163). Figure 4-3 ...

  • TP-Link TL-WR1042ND - page 20

    Application Guide - 19 - Username: Default setting of the wireless router is admin in lower case letters. Password: Default setting of the wireless router is admin in lower case letters. Comment s: The information that you want to record for the specifi c site. Login method: select Normal ¾ Normal - The user name and p assword are mandatory to con ...

  • TP-Link TL-WR1042ND - page 21

    Application Guide - 20 - 4. Now you can see the folder TP-LINK in the panel. Double-click the folder . Figure 4-5 5. Y ou will see three subfol ders and three files in the TP-LINK folder . Figure 4-6 ...

  • TP-Link TL-WR1042ND - page 22

    Application Guide - 21 - 6. Double-click a file and it will be downloaded automatically . Figure 4-7 ) Note: When you connect to a site, your My Documents folder is the default loca l folder to save your downloaded files, and the default remote folder is th e folder specified when you configured the site. You can specify a di fferent local folder a ...

  • TP-Link TL-WR1042ND - page 23

    Application Guide - 22 - 2. Y ou will see the interface as below . Figure 4-9 3. Follow the cursor , input ipconfig and press Enter key . Write down the IP address of Default Gateway as shown in Figure 4-10 . (Here is 192.168.0.1). Figure 4-10 ...

  • TP-Link TL-WR1042ND - page 24

    Application Guide - 23 - 4. Open the CuteFTP and it will show as below . Figure 4-1 1 5. Go to File -> New -> FTP Site or press Ctrl+N to open a new Site properties . Figure 4-12 ...

  • TP-Link TL-WR1042ND - page 25

    Application Guide - 24 - 6. Set the dialog box as below and click Connect . Label: Name of the site. Host address: The IP of the Default Gateway written down in S tep 3 (here is 192.168.0.1). Username: Default setting of the wireless router is admin in lower case letters. Password: Default setting of the wireless router is admin in lower case lette ...

  • TP-Link TL-WR1042ND - page 26

    Application Guide - 25 - 7. Now you can see the folder TP-LINK in the panel. Double-click the folder . Figure 4-14 8. Y ou can see three subfol d ers and three files in the TP-LINK folder . Figure 4-15 ...

  • TP-Link TL-WR1042ND - page 27

    Application Guide - 26 - 9. Double-click a file and it will be downloaded automatically . Figure 4-16 ) Note: When you connect to a site, your My Documents folder is the default local folder to save your downloaded files, and the default remote folder is the folder specified w hen you configured the site. You can specify a different local folder an ...

Manufacturer TP-Link Category Network Router

Documents that we receive from a manufacturer of a TP-Link TL-WR1042ND can be divided into several groups. They are, among others:
- TP-Link technical drawings
- TL-WR1042ND manuals
- TP-Link product data sheets
- information booklets
- or energy labels TP-Link TL-WR1042ND
All of them are important, but the most important information from the point of view of use of the device are in the user manual TP-Link TL-WR1042ND.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TP-Link TL-WR1042ND, service manual, brief instructions and user manuals TP-Link TL-WR1042ND. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TP-Link TL-WR1042ND.

Similar manuals

A complete manual for the device TP-Link TL-WR1042ND, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TP-Link TL-WR1042ND by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TP-Link TL-WR1042ND.

A complete TP-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TP-Link TL-WR1042ND - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TP-Link TL-WR1042ND, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TP-Link TL-WR1042ND, that we can find in the current document
3. Tips how to use the basic functions of the device TP-Link TL-WR1042ND - which should help us in our first steps of using TP-Link TL-WR1042ND
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TP-Link TL-WR1042ND
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TP-Link TL-WR1042ND in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TP-Link TL-WR1042ND?

Use the form below

If you did not solve your problem by using a manual TP-Link TL-WR1042ND, ask a question using the form below. If a user had a similar problem with TP-Link TL-WR1042ND it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)