English dropdown-ico

Manual Patton electronic 3201

132 pages 5.07 mb
Download

Go to site of 132

Summary
  • Patton electronic 3201 - page 1

    Model 3201 and Model 3241 G.SHDSL Router Modems User Guide Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com URL: www .patton.com Document Number: 033211U Rev . A Part Number: 07M3201 Revised: February 7, 2003 For Quick Start Installation see page 21 ...

  • Patton electronic 3201 - page 2

    Patton Electronics Company , Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA tel: +1 (301) 975-1000 fax: +1 (301) 869-9293 support: +1 (301) 975-1007 url: www .patton.com e-mail: support@patton.com Copyright © 2002 & 2003, Patton Electronics Company . All rights reserved. The information in this document is subject to change without no ...

  • Patton electronic 3201 - page 3

    1 Contents Contents ......................................................................................................................................................... 1 Compliance Infor mation ................................................................................................................................ 5 Radio and TV Interf ...

  • Patton electronic 3201 - page 4

    Contents Model 3201 G.SHDSL Integrated Access Device User Guide 2 What you will need .........................................................................................................................................22 Identify the connectors and attach the cables ............................................................................... ...

  • Patton electronic 3201 - page 5

    3 Model 3201 G.SHDSL Integrated Access Device User Guide Contents Remote side configuration ..............................................................................................................................98 Central side configuration ...................................................................................................... ...

  • Patton electronic 3201 - page 6

    Contents Model 3201 G.SHDSL Integrated Access Device User Guide 4 RJ-11 non-shielded port ......................................................................................................................................122 RJ-45 non-shielded RS-232 console port (EIA-561) ......................................................................... ...

  • Patton electronic 3201 - page 7

    5 Compliance Information Radio and TV Interference The M odel 3201 or 3241 generates and uses radio frequency energy , and if not installed and used properly- that is, in strict accordance with the manufactur er’ s instructions-may cause inter ference to radio and television reception. The M odels 3201 and 3241 have been tested and found to compl ...

  • Patton electronic 3201 - page 8

    Compliance Information Model 3201 G.SHDSL Integrated Access Device User Guide 6 3. If your M odel 3201 or 3241 causes harm to the telephone network, the telephone company may tempo- rarily discontinue your service. If possible, they will notify you in advance, but if advance notice is not practical, you will be notified as soon as possible and wil ...

  • Patton electronic 3201 - page 9

    7 About this guide This guide describes installing and configuring a P atton Electronics M odel 3201 or 3241 G.SHDSL Router modem. The instructions in this guide are based on the following assumptions: • The router modem will connect to another router modem or DSLAM • There is a LAN connected to the Ethernet port of the router modem • U sers ...

  • Patton electronic 3201 - page 10

    About this guide Model 3201 G.SHDSL Integrated Access Device User Guide 8 Precautions N otes and cautions, which have the following meanings, are used throughout this guide to help y ou become aware of potential Router modem pr oblems. W arnings relate to personal injury issues, and Cautions refer to potential property damage. Note Calls attention ...

  • Patton electronic 3201 - page 11

    9 Model 3201 G.SHDSL Integrated Access Device User Guide About this guide T ypographical conventions used in this document This section describes the typographical conventions and terms used in this guide. General conventions The procedures described in this manual use the follo wing text conventions: Mouse conventions The following conventions ar ...

  • Patton electronic 3201 - page 12

    About this guide Model 3201 G.SHDSL Integrated Access Device User Guide 10 ...

  • Patton electronic 3201 - page 13

    11 Chapter 1 General Information Chapter contents Model 3201/3241 G.SHDSL Router Modem overview ........................................................................................12 General attributes ............................................................................................................................................12 G ...

  • Patton electronic 3201 - page 14

    1 • General Information Model 3201 G.SHDSL Integrated Access Device User Guide 12 Model 3201/3241 G.SHDSL Router Modem overview Model 3201/3241 G.SHDSL Router Modem overview The P atton Models 3201 and 3241 r outer modems are G.SHDSL routers/bridges for delivering basic and advanced IP services from the wide-area network to a local 10/100Base-T E ...

  • Patton electronic 3201 - page 15

    Model 3201/3241 G.SHDSL Router Modem overview 13 Model 3201 G.SHDSL Integrated Access Device User Guide 1 • General Information Protocol support • Complete internetworking with IP (RFC 741), T CP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826). • IP Router with RIP (RFC 1058), RIPv2 (RFC 2453) for up to 64 static routes. • Built-in ...

  • Patton electronic 3201 - page 16

    1 • General Information Model 3201 G.SHDSL Integrated Access Device User Guide 14 Front Panel Status LEDs Front Panel Status LEDs The DiamondLink routers hav e all status LEDs on the front panel of the unit, and all electrical connections are located on the rear panel. Figure 1. Model 3201 The status LEDs from left to right are (see table 3 for L ...

  • Patton electronic 3201 - page 17

    Front Panel Status LEDs 15 Model 3201 G.SHDSL Integrated Access Device User Guide 1 • General Information Power input connector The router modem comes with an AC or DC po wer supply . (see “P ower and P ower S upply Specifications ” on page 117) • The power connection to the r outer modem is a 2.5 mm barrel receptacle with the center condu ...

  • Patton electronic 3201 - page 18

    1 • General Information Model 3201 G.SHDSL Integrated Access Device User Guide 16 Front Panel Status LEDs Console port (outlined in red) The unshielded RJ-45 RS-232 console DCE port (EIA-561) with the pin-out listed in the following table: Ethernet port (outlined in green) Shielded RJ-45 10B ase-T/100Base-TX Ethernet port using pins 1,2,3, & ...

  • Patton electronic 3201 - page 19

    17 Chapter 2 Product Over view Chapter contents Product Overview ..................................................................................................................................................18 Applications Overview .................................................................................................................. ...

  • Patton electronic 3201 - page 20

    2 • Product Overview Model 3201 G.SHDSL Integrated Access Device User Guide 18 Product Overview Product Overview The M odel 3201 modem operates as a bridge or a router and has two ports for communication: • The Ethernet port—Connects to the LAN side of the connection • The Line port—Pr ovides the G.SHDSL transmission connection between th ...

  • Patton electronic 3201 - page 21

    Product Overview 19 Model 3201 G.SHDSL Integrated Access Device User Guide 2 • Product Overview the administrator desires management through a web br owser . Then an IP address is necessary for the administrator to access the 3201 modem. In a typical bridged configuration , the DSL bridge is transparent to the network. I t bridges the DSL line t ...

  • Patton electronic 3201 - page 22

    2 • Product Overview Model 3201 G.SHDSL Integrated Access Device User Guide 20 Product Overview ...

  • Patton electronic 3201 - page 23

    21 Chapter 3 Quick Star t Installation Chapter contents Hardware installation ............................................................................................................................................22 What you will need .............................................................................................................. ...

  • Patton electronic 3201 - page 24

    3 • Quick Start Installation Model 3201 G.SHDSL Integrated Access Device User Guide 22 Hardware installation Hardware installation If you are alr eady familiar with Model 3201/3241 Router M odem installation and configuration, this chapter will enable you to finsh the job quickly . Installation consists of the following: • P reparing for the ...

  • Patton electronic 3201 - page 25

    Hardware installation 23 Model 3201 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation 7. A message will display , “Login S uccessful.” By typing the character “?”, all the commands will be dis- played. Any command’ s parameters may be seen by entering the command followed by a space and a ques- tion mark. → ethe ...

  • Patton electronic 3201 - page 26

    3 • Quick Start Installation Model 3201 G.SHDSL Integrated Access Device User Guide 24 Hardware installation Router/Bridge Status LEDs The LEDs indicate the status of power , the W AN (DSL) inter-modem link, and the Ethernet connection. Note When extinguished, the LED indicators are clear; when lit, they shine a brilliant yellow . W eb Operation ...

  • Patton electronic 3201 - page 27

    Hardware installation 25 Model 3201 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation The M odel 3201 home page displays (see F igure 5). Figure 5. Model 3201 home page The M odel 3201/3241 menu structure is shown in figur e 6 on page 26. ...

  • Patton electronic 3201 - page 28

    3 • Quick Start Installation Model 3201 G.SHDSL Integrated Access Device User Guide 26 Hardware installation Figure 6. Model 3201/3241 Menu Structure ...

  • Patton electronic 3201 - page 29

    27 Chapter 4 Basic Application Configurations Chapter contents Introduction ..........................................................................................................................................................28 Two stand-alone units directly connected ........................................................................... ...

  • Patton electronic 3201 - page 30

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 28 Introduction Introduction The basic applications are divided accor ding to whether the application is bridged or routed. The bridged applications are RFC 1483 Bridged , PPP oA Bridged , and HDL C Bridged . The routed applications are RFC 1483 , PPP oA , ...

  • Patton electronic 3201 - page 31

    Two stand-alone units directly connected 29 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations T wo stand-alone units directly connected Ethernet Extension (HDLC - PPPoH Bridged) Model 3201 (R emote) Configuration S teps (PPP oH Bridged) F rom the command line interface (CLI) via the RS-232 control port, ...

  • Patton electronic 3201 - page 32

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 30 Two stand-alone units directly connected V erify the settings to be: – Interface = 1 – LLC header mode = dialout – LLC header mode = off – HDLC header mode = on – N o authentication – Leave U ser name and P assword blank. Click on Apply . 4. ...

  • Patton electronic 3201 - page 33

    Two stand-alone units directly connected 31 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Change T erminal T ype to Central and I nterface T ype to hdlc . Click on the Configure button. In the A ction submenu under G.SHDSL, change Action to Deactivate , then click on Action . Return to A ction, selec ...

  • Patton electronic 3201 - page 34

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 32 Two stand-alone units directly connected – LLC header mode = off – HDLC header mode = on – N o authentication – Leave U ser name and P assword blank. Click on Apply . 3. Go to G.SHDSL in the Configuration M enu, then the submenu Configuration ...

  • Patton electronic 3201 - page 35

    Two stand-alone units directly connected 33 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.SHDSL in the Configuration Menu > Configuration > verify that T erminal T ype is ...

  • Patton electronic 3201 - page 36

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 34 Two stand-alone units directly connected Click on Configure . 3. Go to Configuration Menu > Configuration > W AN connections > Edit (for PPPoH Routed service) > Edit ‘IP Interface’ > Ipaddr: [enter the W AN IP Addr ess, in this exa ...

  • Patton electronic 3201 - page 37

    Two stand-alone units directly connected 35 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 4. Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route > Create the gateway to the r emote 3201 by entering the W AN IP address of the remote 3201, in this example, ente ...

  • Patton electronic 3201 - page 38

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 36 Two stand-alone units directly connected 5. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem State should be “ deactivated.” (If not, go to the A ction and change it to deactivate.) Then in the Action submenu under G.SH ...

  • Patton electronic 3201 - page 39

    Two stand-alone units directly connected 37 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on G.SHDSL in the Configuration Menu > Configuration > verify that T erminal T ype is remote and Interface T ype is “ hdlc .” If changed, then click on Configure . Click on Action > Select d ...

  • Patton electronic 3201 - page 40

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 38 DSLAM Connections with remote CPE units – Cost:1 – Interface:[blank] 5. Go to G.SHDSL in the Configuration M enu, then the submenu Status . The Modem S tate should be “ deacti- vated.” (If not, go to the A ction and change it to deactivate.) Th ...

  • Patton electronic 3201 - page 41

    DSLAM Connections with remote CPE units 39 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Model 3201 (R emote) Configuration S teps (RFC 1483 Bridged) F rom the command line interface (CLI) via the RS-232 control port, → ip list interfaces One IP interface is called ip1 with an IP address of 192.168 ...

  • Patton electronic 3201 - page 42

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 40 DSLAM Connections with remote CPE units Change T erminal T ype to Remote and Interface T ype to atm . Click on the Configure button. In the A ction submenu under G.SHDSL, change Action to Deactivate , then click on Action. Return to A ction, select Sta ...

  • Patton electronic 3201 - page 43

    DSLAM Connections with remote CPE units 41 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations In the A ction submenu under G.SHDSL, change Action to Deactivate , then click on Action . Return to A ction, select Start and click on Action . PPPoH Bridged Configuration Model 3201 (R emote) Configuration S t ...

  • Patton electronic 3201 - page 44

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 42 DSLAM Connections with remote CPE units In the Description field, enter the description y ou wish. In this example, it is called PPP oH Bridged . – Interface = 1 – LLC header mode = dialout – LLC header mode = off – HDLC header mode = on – N ...

  • Patton electronic 3201 - page 45

    DSLAM Connections with remote CPE units 43 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Model 3201 (C entral) Configur ation Steps (PPP oH Bridged) F rom the command line interface (CLI) via the RS-232 control port, → ip list interfaces One IP interface is called ip1 with an IP address of 192.168. ...

  • Patton electronic 3201 - page 46

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 44 DSLAM Connections with remote CPE units PPPoA Bridged (RFC 2364) Configuration The user data for transmission is in the form of IP packets but encapsulated in a PPP packet, transmitted and received through a PPP session to the connection. The PPP packe ...

  • Patton electronic 3201 - page 47

    DSLAM Connections with remote CPE units 45 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations – VPI = 0 – V CI = 300 – LLC header mode = off – HDLC header mode = off – N o authentication – Leave U ser name and P assword blank. Click on Apply . 3. Go to G.SHDSL in the Configuration M enu, then ...

  • Patton electronic 3201 - page 48

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 46 DSLAM Connections with remote CPE units – N o authentication – Leave U ser name and P assword blank. Click on Apply . 3. Go to G.SHDSL in the Configuration M enu, then the submenu Configuration. Leave T erminal T ype as Central . Change Interface ...

  • Patton electronic 3201 - page 49

    DSLAM Connections with remote CPE units 47 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.SHDSL in the Configuration M enu > Configuration > verify that T erminal T ype is ...

  • Patton electronic 3201 - page 50

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 48 DSLAM Connections with remote CPE units In the Description field, enter the description y ou wish. In this example, it is called RFC 1483 Routed . Change the configuration parameters to match the following. Description:RFC 1483 Routed – VPI:0 – V ...

  • Patton electronic 3201 - page 51

    DSLAM Connections with remote CPE units 49 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations The other fields should be: – Destination:0.0.0.0 – Gateway:192.168.164.3 – Mask:0.0.0.0 – Cost:1 – Interface:[blank] 4. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem St ...

  • Patton electronic 3201 - page 52

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 50 DSLAM Connections with remote CPE units Change the IP address so it is in the same subnet as the laptop PC. The laptop ’ s IP address is 192.168.172.229, so in this example, change the IP address of the 3201 to 192.168.172.3. The default IP mask is 25 ...

  • Patton electronic 3201 - page 53

    DSLAM Connections with remote CPE units 51 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on Action > S elect deactivate for Action > Click on the A ction button. 2. On the M enu, go to Configuration, then to W AN Connections. Delete both default W AN ser vices already defined. Click on C ...

  • Patton electronic 3201 - page 54

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 52 DSLAM Connections with remote CPE units 3. Configuration M enu > Configuration > IP Routes > Click on Cr eate ne w I p V4 R oute > Create the gate- way to the remote 3201 by entering the W AN IP address of the r emote 3201, in this example ...

  • Patton electronic 3201 - page 55

    DSLAM Connections with remote CPE units 53 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 4. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem State should be “ deactivated.” (If not, go to the A ction and change it to deactivate.) Then in the Action submenu under G.SHD ...

  • Patton electronic 3201 - page 56

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 54 DSLAM Connections with remote CPE units One IP interface was called ip1 with an IP address of 192.168.1.1 Change it to an IP address which is in the same subnet as the Desktop PC. F or example, to 192.168.100.2. The default IP mask is 255.255.255.0. → ...

  • Patton electronic 3201 - page 57

    DSLAM Connections with remote CPE units 55 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations – U sername:[blank] – P assword:[blank] Click on Configure . 3. Go to Configuration M enu > Configuration > W AN connections > Edit (for PPP oH Routed service) > Edit ‘IP Interface ’ > I ...

  • Patton electronic 3201 - page 58

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 56 DSLAM Connections with remote CPE units 4. Configuration M enu > Configuration > IP Routes > Click on Cr eate ne w I p V4 R oute > Create the gate- way to the remote 3201 by entering the W AN IP address of the r emote 3201, in this example ...

  • Patton electronic 3201 - page 59

    DSLAM Connections with remote CPE units 57 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 5. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem State should be “ deactivated.” (If not, go to the A ction and change it to deactivate.) Then in the Action submenu under G.SHD ...

  • Patton electronic 3201 - page 60

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 58 DSLAM Connections with remote CPE units 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.SHDSL in the Configuration M enu > Configuration > verify that T erminal T ype is ...

  • Patton electronic 3201 - page 61

    DSLAM Connections with remote CPE units 59 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 3. Go to Configuration M enu > Configuration > W AN connections > Edit (for PPP oH Routed service) > Edit ‘IP Interface ’ > I paddr: [enter the W AN IP Address, in this example = 192.168.164.3 ...

  • Patton electronic 3201 - page 62

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 60 DSLAM Connections with remote CPE units PPPoA Routed (RFC 2364) This routed application is very similar to the PPP oA Bridged application. The user data for transmission is in the form of IP packets but encapsulated in a PPP packet, transmitted and rece ...

  • Patton electronic 3201 - page 63

    DSLAM Connections with remote CPE units 61 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.SHDSL in the Configuration M enu > Configuration > verify that T erminal T ype is Ce ...

  • Patton electronic 3201 - page 64

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 62 DSLAM Connections with remote CPE units 3. In the Configuration M enu, click on Configuration then > W AN Connections > Edit (for the W AN Ser- vice ppp1) > Edit ‘PPP’ and verify or change the follo wing parameters on the Edit PPP webpage ...

  • Patton electronic 3201 - page 65

    DSLAM Connections with remote CPE units 63 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations – Disco ver Primary DNS:true – Disco ver Secondary DNS:tr ue – Give DNS to R elay:tr ue – Give DNS to Client:true – Remote DNS:0.0.0.0 – Remote S econdary:0.0.0.0 – LCP Echo E very:10 – Auto Connec ...

  • Patton electronic 3201 - page 66

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 64 DSLAM Connections with remote CPE units – Class:UBR – P ort:atm Click on the Change button if changes were made. 5. Click on Edit ‘IP Interface.’ V erify or change if necessar y the following O ptions parameters. – I paddr:0.0.0.0 – Mask:0.0 ...

  • Patton electronic 3201 - page 67

    DSLAM Connections with remote CPE units 65 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.SHDSL in the Configuration M enu> Configuration > verify that T erminal T ype is Cen ...

  • Patton electronic 3201 - page 68

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 66 DSLAM Connections with remote CPE units 2. On the M enu, go to Configuration, then to W AN Connections Delete both default W AN ser vices already defined. Click on Create a new service in the main window , select PPPoA Routed and click on the Configu ...

  • Patton electronic 3201 - page 69

    DSLAM Connections with remote CPE units 67 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on Configure . 3. In the Configuration M enu, click on Configuration then > W AN Connections > Edit (for the W AN Ser- vice ppp1) > Edit ‘PPP’ and verify or change the follo wing parameters o ...

  • Patton electronic 3201 - page 70

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 68 DSLAM Connections with remote CPE units – MR U: 0 – IP Addr from IPCP: true – Disco ver Primary DNS: false – Disco ver Secondary DNS: false – Give DNS to R elay: false – Give DNS to Client: false – Remote DNS: 0.0.0.0 – Remote S econdary ...

  • Patton electronic 3201 - page 71

    DSLAM Connections with remote CPE units 69 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on Change button. ...

  • Patton electronic 3201 - page 72

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 70 DSLAM Connections with remote CPE units 4. Click on Edit ‘ A TM Channel.’ V erify the Options to match the following. (Change if necessary .) – Tx Vci:800 – Tx Vpi:0 – Rx Vci:800 – Rx Vpi:0 – P eak Cell Rate:2000 – Burst T olerance:0 – ...

  • Patton electronic 3201 - page 73

    DSLAM Connections with remote CPE units 71 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 5. Click on Edit ‘IP Interface.’ V erify or change if necessar y the following O ptions parameters. – I paddr:192.168.164.2 – Mask:255.255.255.0 – Dhcp:false – MTU:1500 – Enabled:true Click on the Ch ...

  • Patton electronic 3201 - page 74

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 72 DSLAM Connections with remote CPE units 7. F rom the Configuration Menu, click on Configuration > A uthentication > Create a new user > enter the information for the following parameters in the webpage D etails for the new user . One of these ...

  • Patton electronic 3201 - page 75

    DSLAM Connections with remote CPE units 73 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. 2. On the M enu, go to Configuration, then to W AN Connections. Delete the factory default W AN ser ...

  • Patton electronic 3201 - page 76

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 74 DSLAM Connections with remote CPE units 3. Returning to the 3201 Configuration M enu, click on Configuration, then IP Routes. – Click on “Create new I p V4 Route.” – Destination:0.0.0.0 – Gateway:192.168.164.3 – Mask:0.0.0.0 – Cost:1 – ...

  • Patton electronic 3201 - page 77

    DSLAM Connections with remote CPE units 75 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 4. Go to G.SHDSL in the Configuration M enu, then the submenu Configuration. Change T erminal T ype to Central and I nter face T ype to atm . Click on the Configure button. In the A ction submenu under G.SHDSL, ...

  • Patton electronic 3201 - page 78

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 76 DSLAM Connections with remote CPE units Model 3201 (C entral) Configur ation Steps (IP oA Routed) F rom the command line interface (CLI) via the RS-232 control port: → ip list interfaces One IP interface was called ip1 with an IP address of 192.168.1 ...

  • Patton electronic 3201 - page 79

    DSLAM Connections with remote CPE units 77 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 3. Returning to the 3201 Configuration M enu, click on Configuration, then IP Routes. Click on “Create new I p V4 Route.” – Destination:0.0.0.0 – Gateway:192.168.164.2 – Mask:0.0.0.0 – Cost:1 – Int ...

  • Patton electronic 3201 - page 80

    4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 78 DSLAM Connections with remote CPE units ...

  • Patton electronic 3201 - page 81

    79 Chapter 5 Specialized Configurations Chapter contents IP Configurations ..................................................................................................................................................80 Router ...................................................................................................................... ...

  • Patton electronic 3201 - page 82

    5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 80 IP Configurations IP Configurations The router can be configured to use the RIP routing pr otocol, version 1 or 2, for accepting and sending RIP packets. Router RIP and RIPv2 Static R oute 1. Click on > Configuration, then > IP Routes on the Configu ...

  • Patton electronic 3201 - page 83

    IP Configurations 81 Model 3201 G.SHDSL Integrated Access Device User Guide 5 • Specialized Configurations DHCP Server and Relay The DHCP Server or Relay are simply configur ed via the web page management pages. 1. Go to > Configuration M enu > Configuration > DHCP Ser ver and the DHCP S er ver page is displayed. At the bottom of the ...

  • Patton electronic 3201 - page 84

    5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 82 IP Configurations 3. Clicking on Advanced Options offers additional options for configuration. They are displayed in the following figure. 4. The router modem may be used as a DHCP Relay Agent if desir ed. Go to > Configuration Menu > Con- figuratio ...

  • Patton electronic 3201 - page 85

    IP Configurations 83 Model 3201 G.SHDSL Integrated Access Device User Guide 5 • Specialized Configurations DNS Relay M ode In the DNS R elay web page, up to 10 DNS server addresses may be added to utilize the DNS servers already being used by the network. 1. Select Enabled . 2. Click on Configure . 3. Enter the DNS server address in the field f ...

  • Patton electronic 3201 - page 86

    5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 84 IP Configurations ...

  • Patton electronic 3201 - page 87

    85 Chapter 6 Security Chapter contents Introduction ..........................................................................................................................................................86 Configuring the router ...................................................................................................................... ...

  • Patton electronic 3201 - page 88

    6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 86 Introduction Introduction Security pro vides the ability to setup and enforce security policies. The policies define the types of traffic per- mitted to pass through a gateway , either inbound, outbound, or both, and from which origins the traffic may be allowed to enter . ...

  • Patton electronic 3201 - page 89

    Configuring the security interfaces 87 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security The next step in configuring the router is adding the default gateway route. Since the W AN IP address of the 3201 modem at the CO site is 192.168.101.2, this will be the gateway for the 3201 modem at the CPE site, the modem we are curr ent ...

  • Patton electronic 3201 - page 90

    6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 88 Configuring the security interfaces 4. Add one more security interface by r epeating step 2. 5. Select N ame of the LAN por t ( ip1 ) and Interface T ype to be inter nal . Click on Apply . N ow the F irewall policies will be added between the security interfaces. Only one F ir ...

  • Patton electronic 3201 - page 91

    Enabling the Firewall 89 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security F irewall P olicies: ID | Name | Type 1 | Type 2 | Validator Allow Only ------------------------------------------------------------------- 1 | item0 | external | internal | false ------------------------------------------------------------------- → fir ...

  • Patton electronic 3201 - page 92

    6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 90 Security Triggers T o allow pings between the two PCs: 1. F rom the Configuration Menu, > Configuration > S ecurity > Fir e wall P olicy Configuration > P ort Filters > Add Raw IP F ilter 2. Enter 1 (for ICMP) in T ransport T ype. 3. Both Inbound and Outbound ...

  • Patton electronic 3201 - page 93

    Intrusion Detection System (IDS) 91 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security After configuring the FTP portfilter , you can open an ftp session from R emote to Local, however you can issue ftp commands (e.g., login, cd, etc.) but transfer data (e.g., ls, dir , get, put commands). The portfilter allows an ftp control ...

  • Patton electronic 3201 - page 94

    6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 92 Intrusion Detection System (IDS) 1. T o enable IDS, click on Enabled for “Intrusion Detection Enabled” on the “S ecurity Interface Configura- tion ” page. Then click on Change State(s) . 2. Click on Configure Intrusion Detection. 3. Y ou may choose which of the parame ...

  • Patton electronic 3201 - page 95

    Intrusion Detection System (IDS) 93 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security firewall before a SYN F lood is detected. SYN Flood is a DOS attack. When establishing normal TCP connections, three packets are ex changed: (1) A SYN (synchronize) packet is sent from the host to the network server . (2) A SYN/ACK packet is s ...

  • Patton electronic 3201 - page 96

    6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 94 Intrusion Detection System (IDS) ...

  • Patton electronic 3201 - page 97

    95 Chapter 7 NA T (Network Address T ranslation) Chapter contents Introduction ..........................................................................................................................................................96 Creating an Ethernet Transport ................................................................................... ...

  • Patton electronic 3201 - page 98

    7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 96 Introduction Introduction N etwork Address T ranslation (NA T ) pro vides unlimited local host addresses, enabling users to connect to the Internet without having to pro vide a new address for each and every host. An encr yption capability helps keep a ...

  • Patton electronic 3201 - page 99

    Creating a DSL Link 97 Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation) • DSL data rates should be the same for Remote and Central units Central Side Configuration F rom the WWW interface, do the following: 1. Click on GSHDSL. 2. Click on Configuration. 3. Change the intended DSL Data Rate to the ma ...

  • Patton electronic 3201 - page 100

    7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 98 Creating an ATM Routable Link Creating an A TM Routable Link N ow that you have a DSL link, do the following to configur e a W AN ser vice. Remote side configuration F rom the WWW interface: 1. Click Configuration. 2. Click Create a new ser vice. 3. ...

  • Patton electronic 3201 - page 101

    Creating a route for Remote and Central PCs 99 Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation) 9. Click Action. 10. Save the configuration. Do the follo wing to confirm that the A TM link is working properly: • V erify that the DSL W AN LED is lit. • Ping the R emote unit from the Central Console ...

  • Patton electronic 3201 - page 102

    7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 100 Creating a route for Remote and Central PCs 5. Click OK . Do the follo wing to confirm that the new route is working properly: • V erify that the DSL W AN LED is lit. • Ping the R emote unit from the Central Console → ip ping 192.168.100.11 • ...

  • Patton electronic 3201 - page 103

    NAT Configuration 101 Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation) NA T Configuration F rom the WWW interface: 1. Click Security . 2. Enable Security , then click the W eb browser ’ s refresh button to display the change. 3. U nder Security interfaces, add your internal and external interfaces ba ...

  • Patton electronic 3201 - page 104

    7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 102 NAT Configuration 7. Add P or t N umber 80. Y ou should be able to reach the web interface from the Central side using the Ethernet IP addr ess. ...

  • Patton electronic 3201 - page 105

    103 Chapter 8 Monitoring Status Chapter contents Status LEDs.........................................................................................................................................................104 ...

  • Patton electronic 3201 - page 106

    8 • Monitoring Status Model 3201 G.SHDSL Integrated Access Device User Guide 104 Status LEDs Status LEDs The LEDs indicate the status of the P ow er , the W AN (DSL) inter-modem link, and the Ethernet connection. All LED indicators will present the same looking profile (e.g., clear) when unlit due to being single color , water clear , high-effi ...

  • Patton electronic 3201 - page 107

    105 Chapter 9 Diagnostics and Software Upgrades Chapter contents Ping .....................................................................................................................................................................106 Software Upgrades ............................................................................................. ...

  • Patton electronic 3201 - page 108

    9 • Diagnostics and Software Upgrades Model 3201 G.SHDSL Integrated Access Device User Guide 106 Ping Ping The ping command is executed from the Command Line I nter face (CLI). P ing in the 3201/3241 is executed from the “ip ” command. H ere is the ping format followed by a valid r esponse. ip ping 192.168.100.11 ping: PING 192.168.100.11: 32 ...

  • Patton electronic 3201 - page 109

    Software Upgrades 107 Model 3201 G.SHDSL Integrated Access Device User Guide 9 • Diagnostics and Software Upgrades –K e y – Initbun – Im.conf – Tftpupdt.rbt – Tftpupdt.end – Script.bat 2. Connect the control (console) port of the unit to a PC. 3. Connect the Ethernet port to the appropriate device wher e the upload package will be sto ...

  • Patton electronic 3201 - page 110

    9 • Diagnostics and Software Upgrades Model 3201 G.SHDSL Integrated Access Device User Guide 108 Software Upgrades ...

  • Patton electronic 3201 - page 111

    109 Chapter 10 Contacting Patton for assistance Chapter contents Introduction ........................................................................................................................................................110 Contact information ................................................................................................ ...

  • Patton electronic 3201 - page 112

    10 • Contacting Patton for assistance Digital Modem Adapter Getting Started Guide 110 Introduction Introduction This chapter contains the following information: • “Contact information ”—describes how to contact P A T T ON technical support for assistance. • “W arranty Service and Returned Mer chandise Authorizations (RMAs)”—contai ...

  • Patton electronic 3201 - page 113

    Warranty Service and Returned Merchandise Authorizations (RMAs) 111 Digital Modem Adapter Getting Started Guide 10 • Contacting Patton for assistance Return for credit policy • Less than 30 days: N o Charge. Y our credit will be issued upon receipt and inspection of the equipment. • 30 to 60 days: W e will add a 20% restocking charge (crediti ...

  • Patton electronic 3201 - page 114

    10 • Contacting Patton for assistance Digital Modem Adapter Getting Started Guide 112 Warranty Service and Returned Merchandise Authorizations (RMAs) ...

  • Patton electronic 3201 - page 115

    113 Appendix A Specifications Chapter contents General Characteristics ........................................................................................................................................114 G.SHDSL Characteristics (Model 3201/3241) ................................................................................................ ...

  • Patton electronic 3201 - page 116

    A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide 114 General Characteristics General Characteristics • Compact low-cost plug-and-play router • 10/100 Ethernet • U nlimited host support. • Comprehensive har dware diagnostics, works with any operating system, easy maintenance and effortless installation. • Plug-an ...

  • Patton electronic 3201 - page 117

    Protocol Support 115 Model 3201 G.SHDSL Integrated Access Device User Guide A • Specifications Protocol Support • Complete internetworking with IP (RFC 741), T CP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826). • IP Router with RIP (RFC 1058), RIPv2 (RFC 2453), • U p to 64 static routes with user selectable priority over RIP/OSPF r ...

  • Patton electronic 3201 - page 118

    A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide 116 Management • Enhanced ILMI 4.0 for auto-configuration of A TM PVCs. • FRF .12 F rame Relay F ragmentation support, LMI For F rame Relay PV C Link Management, FRF .5 F rame Relay to A TM N etwork internetworking, and FRF .8 F rame Relay to A TM Ser vice I nternetwor ...

  • Patton electronic 3201 - page 119

    Dimensions 117 Model 3201 G.SHDSL Integrated Access Device User Guide A • Specifications Dimensions 1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm) Power and Power Supply Specifications The 3201 may come with either an AC or DC po wer supply . • The supply ’ s connection to the 3201 is a 2.5 mm barrel receptacle with the center conductor ...

  • Patton electronic 3201 - page 120

    A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide 118 Power and Power Supply Specifications • Isolation 500 VDC • Environment 0–50°C; 5–95% relativ e humidity , non-condensing • Size 3.0 x 1.63 x 0.75 in. (76 x 42 x 19 mm) Connect the equipment to a 36–60 VDC source that is electri- cally isolated from the AC ...

  • Patton electronic 3201 - page 121

    119 Appendix B Cable Recommendations Chapter contents DSL Cable ...........................................................................................................................................................120 Ethernet Cable ................................................................................................................ ...

  • Patton electronic 3201 - page 122

    B • Cable Recommendations Model 3095 mDSL DACS Getting Started Guide 120 DSL Cable DSL Cable 10 foot (3 m), RJ-11/RJ-11 (refer to “RJ-11 non-shielded port” on page 122) Ethernet Cable Ethernet cable (P/N 10-2500) (r efer to “RJ-45 shielded 10/100 Ethernet port” on page 122) Adapter EIA-561 to DB-9 (P/N 16F-561) (refer to “RJ-45 non-shie ...

  • Patton electronic 3201 - page 123

    121 Appendix C Physical Connectors Chapter contents RJ-45 shielded 10/100 Ethernet port ...................................................................................................................122 RJ-11 non-shielded port ....................................................................................................................... ...

  • Patton electronic 3201 - page 124

    C • Physical Connectors Model 3201 G.SHDSL Integrated Access Device User Guide 122 RJ-45 shielded 10/100 Ethernet port RJ-45 shielded 10/100 Ethernet port Assuming the MDI-X switch is in the out position. RJ-11 non-shielded port Single twisted-pair (TP) for full-duplex transmission. The signals are not polarity sensitive. RJ-45 non-shielded RS-23 ...

  • Patton electronic 3201 - page 125

    123 Appendix D Command Line Inter face (CLI) Operation Chapter contents Introduction ........................................................................................................................................................124 CLI Terminology ............................................................................................. ...

  • Patton electronic 3201 - page 126

    D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 124 Introduction Introduction The modem configuration and status can also be view and modified through the console, which is accessible through the RS-232 serial port or through a T elnet session over Ethernet. CLI T erminology In or der to use the ...

  • Patton electronic 3201 - page 127

    CLI Terminology 125 Model 3201 G.SHDSL Integrated Access Device User Guide D • Command Line Interface (CLI) Operation Using the Console The console commands needed for the various modes of operation are described in later sections. I n this sub- section are the most basic commands needed for console operation. By entering “?” all the high lev ...

  • Patton electronic 3201 - page 128

    D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 126 Administering user accounts The <name> of the interface. In this instance the interface name is ip1. It is important that you do the “?” inquiry to determine whether additional parameters follow . → ip interface ip1 ? add delete clear ...

  • Patton electronic 3201 - page 129

    Administering user accounts 127 Model 3201 G.SHDSL Integrated Access Device User Guide D • Command Line Interface (CLI) Operation The following information is returned: Users: May May Access ID | Name | Conf. | Dialin | Level | Comment -----|--------|----------|----------|-----------|------------------------- 1 | fred | disabled | ENABLED | defau ...

  • Patton electronic 3201 - page 130

    D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 128 Administering user accounts Controlling user access T o set user access for user username, use the command (all on one line): system set user < username > access {default|engineer|superuser} G.SHDSL Commands: Command format: ‘ gshdsl Acti ...

  • Patton electronic 3201 - page 131

    Administering user accounts 129 Model 3201 G.SHDSL Integrated Access Device User Guide D • Command Line Interface (CLI) Operation 3. The interface type needs to be the same to pass data (Interface) 4. Issue the ‘ Action ’ command to start the handshaking process (Action Start) Example: T o set up the units to r un at 2.048Mbps using A TM inte ...

  • Patton electronic 3201 - page 132

    D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 130 Administering user accounts ...

Manufacturer Patton electronic Category Modem

Documents that we receive from a manufacturer of a Patton electronic 3201 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 3201 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 3201
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 3201.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 3201, service manual, brief instructions and user manuals Patton electronic 3201. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 3201.

Similar manuals

A complete manual for the device Patton electronic 3201, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 3201 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 3201.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 3201 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 3201, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 3201, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 3201 - which should help us in our first steps of using Patton electronic 3201
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 3201
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 3201 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 3201?

Use the form below

If you did not solve your problem by using a manual Patton electronic 3201, ask a question using the form below. If a user had a similar problem with Patton electronic 3201 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)