Manual Viking LPKPDR

10 pages 1.12 mb
Download

Go to site of 10

Summary
  • Viking LPKPDR - page 1

    F20525E EN (041414) Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 Installation Guide LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops ...

  • Viking LPKPDR - page 2

    Table of Contents IMPORTANT– Please Read and Follow! 2 3 Fire/explosion hazard. IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH. • DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. • WHA ...

  • Viking LPKPDR - page 3

    4 LP Orifice Conversion Kit Contents Excludes models VGR, VCM, VRT, VRT-R and D3 models. For information on these models, please contact customer service at 1-888-845-4641. 5 Regulator Conversion Flip Cap Hex Nut Cap Before proceeding with conversion, turn off gas supply and disconnect power to unit. • Sealed Surface Burner Models Identify regula ...

  • Viking LPKPDR - page 4

    7 6 Infrared Broiler Conversion IMPORTANT: The infrared broiler orifice must be changed from rear of range before unit is installed. Locate bag labeled IR Broiler Orifice. Remove nut securing 90 degree fitting and broiler tubing to rear of range. Remove Orifice from 90 degree fitting and replace with orifice from bag labeled IR Broiler Orifice. Rev ...

  • Viking LPKPDR - page 5

    8 Locate bag labeled Sealed Burner Orifice Type 2. NOTE: If the burner is a PowerPlus™ Burner (check control panel), use orifice kit 011915-000 to convert this burner only. Remove the screws (Item #1) and set burner base aside (Item #2). IMPORTANT: Burner bases must be handled carefully to prevent igniter wires from becoming disconnected. Loose i ...

  • Viking LPKPDR - page 6

    11 10 Orifice Locations (#61) (#63) (#61) (#67) (#57) (#65) (#65) (#57) (#67) DGRT301 DGRT361 (#60) (#67) (#58) (#70) DCCG130 DSCD130 Open Burner Type 3 Surface Burner Conversion Locate bag labeled Open Burner Orifice Type 3. Remove screws securing open surface burner to burner box and remove open surface burner. NOTE: Igniter wire must be disconne ...

  • Viking LPKPDR - page 7

    13 12 Griddle Conversion (for models equipped with griddle) U-Shape Burner with Spark Ignition Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. Remove screws securing griddle burner to burner box. Loosen air shutter screw and adjust opening on burner to 7/16” and tig ...

  • Viking LPKPDR - page 8

    15 14 Straight Tube Burner with Glow Bar Ignition Remove screws securing glow bar igniter to burner box and place glow bar igniter aside. Remove screws securing metal plate to burner box located underneath griddle burner and remove metal plate. Remove screws securing griddle burner to unit and remove griddle burner. Loosen air shutter screw and adj ...

  • Viking LPKPDR - page 9

    17 16 Wok Conversion (for models equipped with wok) Remove center trivet and/or grates, center ring and grate support. Lift and remove burner from unit. Loosen air shutter screw and adjust opening on burner to 5/8” and tighten air shutter screw. Remove orifice by turning counterclockwise and replace with orifice from bag labeled Wok Orifice. IMPO ...

  • Viking LPKPDR - page 10

    19 18 Bake Conversion “U” Shaped Remove oven racks and rack supports. Remove oven bottom. Remove screws securing bake igniter to bake burner. Remove screws securing bake burner shield to oven burner box. Remove screws securing bake burner to oven burner box. Loosen air shutter screw and adjust opening on burner to 3/8” and tighten air shutter ...

Manufacturer Viking Category Convection Oven

Documents that we receive from a manufacturer of a Viking LPKPDR can be divided into several groups. They are, among others:
- Viking technical drawings
- LPKPDR manuals
- Viking product data sheets
- information booklets
- or energy labels Viking LPKPDR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Viking LPKPDR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Viking LPKPDR, service manual, brief instructions and user manuals Viking LPKPDR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Viking LPKPDR.

Similar manuals

A complete manual for the device Viking LPKPDR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Viking LPKPDR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Viking LPKPDR.

A complete Viking manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Viking LPKPDR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Viking LPKPDR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Viking LPKPDR, that we can find in the current document
3. Tips how to use the basic functions of the device Viking LPKPDR - which should help us in our first steps of using Viking LPKPDR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Viking LPKPDR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Viking LPKPDR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Viking LPKPDR?

Use the form below

If you did not solve your problem by using a manual Viking LPKPDR, ask a question using the form below. If a user had a similar problem with Viking LPKPDR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)