English dropdown-ico

Manual Philips CCA132AT

56 pages 0.8 mb
Download

Go to site of 56

Summary
  • Philips CCA132AT - page 1

    Owner’s Manual Important! Return your Warranty Registration Card within 10 days. See why inside. Color TV with built-in VCR CCA132AT ...

  • Philips CCA132AT - page 2

    Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Return your Warranty Registration card today to ensure you receive all the ...

  • Philips CCA132AT - page 3

    Introduction 3 • Before doing anything else, record the TV/VCR’s model and serial num- bers in the spaces provided on page two. These numbers will help us assist you if you ever call for help. • Your new product, its packaging, and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to ...

  • Philips CCA132AT - page 4

    4 Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Using the TV/VCR . . . . . . . . . . . . ...

  • Philips CCA132AT - page 5

    • The remote control and its batteries are supplied. • Do not mix alkaline and man- ganese batteries. • Do not mix old and new batteries. Before Using the TV/VCR 5 Putting Batteries in the Remote Control 1 Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow. 2 Place two AA batteri ...

  • Philips CCA132AT - page 6

    6 Hooking Up the TV/VCR ANT. ANT. Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna ANT. IN OUT ANT. Connect an RF coaxial cable (75- ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR. Connect a Cable signal or an antenna to the ANT(enna) Jack. Hooking Up Your TV/VCR With a Cable Box To view any ...

  • Philips CCA132AT - page 7

    Hooking Up the TV/VCR (cont’d) 7 EARPHONE AUDIO VIDEO STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME POWER OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. VIDEO AUDIO • Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrat ...

  • Philips CCA132AT - page 8

    8 Turning On the TV/VCR Before you turn on the TV/VCR, make sure there are batteries in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn on the TV/VCR for the first time. 1 Press the POWER button. The TV/VCR will come on and the screen shown below will appear. 2 Press the PLAY/ K button ...

  • Philips CCA132AT - page 9

    Language Selection 9 Follow the steps below to change the language of the on-screen displays and menus. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to choose SELECT LANGUAGE. Then, press the F.FWD/ B button. 4 Press the PLAY/ ▲ button or the STOP/ ▼ button to select ENGLISH or ESPAÑOL (Spanish). 5 Press the STATUS/EXIT button. SELECT ...

  • Philips CCA132AT - page 10

    10 Automatic Channel Setup Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below. 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select PRIM. SETUP, then press the F.FWD/ B button. PRIMARY SETUP > ...

  • Philips CCA132AT - page 11

    Automatic Channel Setup (cont’d) 11 4 Press the F.FWD/ B button or the REW(ind)/ { button to select SAVED (to add that channel) or DELETED (to delete that channel). Repeat steps 3-4 to add or delete other channels. 5 Press the STATUS/EXIT button. Programming of the channel you added or deleted will appear. 3 Press the CH(annel) m / n button to se ...

  • Philips CCA132AT - page 12

    12 Setting the Clock • Entries that do not match the TV/VCR’s calendar will cause a question mark (?) to appear on the screen. • To make corrections while you are setting the clock, press the CLEAR button until the space for the num- ber you want to correct is flashing. Then enter the correct number. Helpful Hints There are three ways to set ...

  • Philips CCA132AT - page 13

    Setting the Clock (cont’d) 13 5 Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. SET MANUAL CLOCK TIME 09 : 30 PM MONTH – – / – – / – – TO CORRECT PRESS CLEAR TO END PRESS EXIT 6 Press two Number buttons for the month, two Num ...

  • Philips CCA132AT - page 14

    14 Setting the Clock (cont’d) Automatic PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the F.FWD/ B button so that ON appears to the right of AUTO CLOCK, then press the MENU button. 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select PRIM. ...

  • Philips CCA132AT - page 15

    Setting the Clock (cont’d) 15 7 When the TV/VCR finds the PBS channel, the time will appear on-screen. Press the STATUS/EXIT button. 6 NOW SEARCHING flashes on the TV/VCR screen. However, you may see the message: “PLEASE TURN OFF TO SET AUTO CLOCK. PLEASE WAIT SEVERAL MINUTES.” If this message appears, turn off the TV/VCR for several minutes. ...

  • Philips CCA132AT - page 16

    16 Setting the Clock (cont’d) Manual PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the F.FWD/ B button so that ON appears to the right of AUTO CLOCK, then press the MENU button. 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select PRIM. SE ...

  • Philips CCA132AT - page 17

    Setting the Clock (cont’d) 17 8 When the TV/VCR finds the clock data, the time will appear on-screen. Press the STATUS/EXIT button. 6 Use the Number buttons to select your PBS station. If you make a mistake, press the CLEAR button, then enter the correct number. ● If CANNOT FIND CLOCK DATA flashes on the TV/VCR screen and you know another PBS c ...

  • Philips CCA132AT - page 18

    18 Daylight-Savings Time 4 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DAYLIGHT SVG.TIME. Then, press the F.FWD/ B button so that ON or OFF appears beside DAYLIGHT SVG. TIME (Daylight Savings Time). 5 Press the STATUS/EXIT button. 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select PRIM. SETUP. T ...

  • Philips CCA132AT - page 19

    Time Zone 19 When you set the clock using AUTO CLOCK, specify your time zone. The TV/VCR will maintain the clock according to your time zone. • If you select AUTO at step 5, the TV/VCR will set the clock according to the time zone data of the PBS station it finds. • You cannot select SET TIME ZONE at step 4 if AUTO CLOCK is set to OFF. Helpful ...

  • Philips CCA132AT - page 20

    20 Front Panel EARPHONE AUDIO VIDEO STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME POWER Cassette Compartment Insert a video cassette tape here. POWER Button Press to turn the power on or off. VOLUME o / p Buttons Press to adjust the sound level. Press the CHANNEL o button and the VOLUME p button on the TV/VCR at the same time to display the pop ...

  • Philips CCA132AT - page 21

    Rear Panel 21 ANT. ANT(enna) Jack Connect your antenna or cable here. Details are on pages six - seven. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ...

  • Philips CCA132AT - page 22

    F.FWD/ B Button When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on-screen. Details are on page 41. Press to change the setting of an item in the on-screen menu or press to proceed to the next menu. Press to adjust the picture controls. Details ...

  • Philips CCA132AT - page 23

    Remote Control Buttons (cont’d) 23 CH(annel) m / n Button Press to scan through the TV/VCR’s channels. MEMORY Button Press to memorize a tape position at which the real-time counter was set to 0:00:00. Details are on page 40. Or, press to memorize the start and end positions on a tape when setting up A-B Repeat Play. Details are on pages 38-39. ...

  • Philips CCA132AT - page 24

    TO ADJUST PRESS { / B 24 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR’s brightness, picture, color, tint, and sharpness. 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select the desired control (BRIGHTNESS, for example). 3 Press the REW(ind)/ { button or the F.FWD/ B button to adjust th ...

  • Philips CCA132AT - page 25

    Adjusting the Picture Controls (cont’d) 25 Decrease Increase BRIGHTNESS decreased brightness increased brightness PICTURE decreased contrast increased contrast COLOR paler more brilliant TINT more purple more green SHARPNESS softer clearer Press the REW(ind)/ { button to decrease a picture control. Press the F.FWD/ B button to increase a picture ...

  • Philips CCA132AT - page 26

    • You cannot view closed captions during recording or tape playback if COUNTER ONLY is set to ON. Details are on pages 48-49. Helpful Hint 1 Press the MENU button. Current Tape Function Time Channel Counter and Counter Memory Tape Speed 12:00 AM STOP CH10 SLP M 1:23:45 A status display will appear when you press the STATUS/EXIT button or certain ...

  • Philips CCA132AT - page 27

    Reminder 27 The channel number will remain on-screen at all times when you set REMINDER to ON. The exception is when closed captioning is selected. Set REMINDER to ON or OFF by following the steps below. 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select REMINDER. 3 Press the REW(ind)/ { button or the F.FWD/ B b ...

  • Philips CCA132AT - page 28

    28 Playing • If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press the PLAY/ ▲ button. • Playback features and options are on pages 37-41. Helpful Hints Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape’s record tab has been removed, playback shoul ...

  • Philips CCA132AT - page 29

    Recording 29 • You cannot record one channel while watching another. • Recording options are on pages 30-36. • You cannot record if DEFEAT RECORDING is set to ON. (REC DEFEATED will flash on-screen.) Details are on page 36. • If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect th ...

  • Philips CCA132AT - page 30

    30 One-Touch Recording The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: ● Channels are set up. ● There is a tape in the TV/VCR. The record tab must be intact. 1 Use the CH(annel) m / n button or the Number buttons ...

  • Philips CCA132AT - page 31

    Rerecording (Tape Duplication) 31 • Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently. • Make sure all connections are secure. Otherwise, you may not record both picture ...

  • Philips CCA132AT - page 32

    32 Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: ● The clock is set. If not, CLOCK MUST BE SET appears, fol- lowed by the SET CLOCK menu. ● Channels are set up. ● There is ...

  • Philips CCA132AT - page 33

    ONE TIME PROGRAM PROGRAM 1 CHANNEL – – – TO CORRECT PRESS CLEAR TO END PRESS EXIT Timer Recording (cont’d) 33 5 Use the Number buttons to enter the channel of the TV program you want to record. ● If you are recording from line input, press 0, 0. A/V IN will appear on-screen. ● If you are recording using a Cable Box, enter the Cable Box ...

  • Philips CCA132AT - page 34

    34 Timer Recording (cont’d) Turn off the TV/VCR for the recording. Insert a tape in the TV/VCR. Leave the Cable Box/DBS on (if applicable). 8 Press the Number 1 button to record in SP speed or press the Number 2 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the SPEED button at this time. 9 Press two Number ...

  • Philips CCA132AT - page 35

    Timer Recording (cont’d) 35 6 Repeat steps 1 - 4 to make sure you have cleared the correct position. Checking or Clearing Timer Recordings 1 With the TV/VCR on, press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR PROGRAM, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to ...

  • Philips CCA132AT - page 36

    36 Defeat Recording Follow the steps below to prevent accidental recording. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DEFEAT RECORDING, then press the F.FWD/ B button so that ON appears beside DEFEAT RECORDING. 4 Press the ...

  • Philips CCA132AT - page 37

    Repeat Play 37 Follow the steps below to program the TV/VCR to play a tape over and over. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select REPEAT PLAY, then press the F.FWD/ B button so that ON appears beside REPEAT PLAY. 4 Press ...

  • Philips CCA132AT - page 38

    38 A - B Repeat Play • To cancel A-B Repeat Play, set ONE TIME PLAY to ON. To set ONE TIME PLAY to ON, follow steps 2-3 above. Then, press the PLAY/ o button or the STOP/ p button to select ONE TIME PLAY. Press the F.FWD/ B button so that ON appears beside ONE TIME PLAY. Then, press the STATUS/EXIT but- ton. • The end position (B) must be later ...

  • Philips CCA132AT - page 39

    6 Press the STATUS/EXIT button to remove the display. A- B REPEAT will appear on-screen. Beneath it, the letter A will flash beside the real-time counter. . A-B REPEAT A 0:12:34 7 Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A). The ...

  • Philips CCA132AT - page 40

    40 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 Press the STATUS/EXIT button. The real-time counter will appear on-screen. 3 While the counter remains ...

  • Philips CCA132AT - page 41

    Playback Options 41 Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/ B button or the REW(ind)/ { button. A fast forward or reverse picture search will begin. 2 To return to normal playback, press the PLAY/ ▲ button. Super High Speed Searching (LP/SLP) 1 During tape playback, press the F.FWD/ B button ...

  • Philips CCA132AT - page 42

    42 SmartLock SmartLock enables parents to prevent their children from watch- ing inappropriate material on TV. SmartLock reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets or exce ...

  • Philips CCA132AT - page 43

    SmartLock (cont’d) 43 5 Press the PLAY/ ▲ button or the STOP/ ▼ button to select Movie Ratings or Parental Guidelines. Then, press the F.FWD/ B button. BLOCK > Movie Ratings Parental Guidelines SELECT KL CHOOSE B TO END PRESS EXIT 6 Press the PLAY/ ▲ button or the STOP/ ▼ button to select the rating you want to block. Then, press the F ...

  • Philips CCA132AT - page 44

    To change the access code, follow these steps. 44 SmartLock (cont’d) 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select SMARTLOCK. Then, press the F.FWD/ B button. SMARTLOCK Enter Your Access Code > SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP PRESS B 3 Use the Number buttons to enter your old ac ...

  • Philips CCA132AT - page 45

    2 Press the PLAY/ o o button or the STOP/ p p button to select VCR SETUP, then press the F.FWD/ B B button. Blue Background 45 VOL . CH. 3 2 1 6 5 4 9 8 7 0 POWER STATUS/EXIT TRACKING REC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWD REW PLAY STOP SLEEP MENU CLEAR If you want the TV screen to be solid blue when a weak signal is received, set BLUE ...

  • Philips CCA132AT - page 46

    46 Setting the Sleep Timer Use the sleep timer to program the TV/VCR to shut off in a cer - tain amount of time. 1 Press the SLEEP button. The sleep timer display will appear on-screen. (You can not set the sleep timer during a recording.) 1-2 • Finish all recordings before the TV/VCR shuts itself off. If a record- ing is in progress, the sleep t ...

  • Philips CCA132AT - page 47

    Usually, the volume bar appears when you press the VOL(ume) m / n button. If you do not need it, set the VOLUME BAR to OFF. For example, when you watch a program that is being broadcast with closed captions, you may choose to set the VOLUME BAR to OFF so the captions can remain on-screen. The captions will remain on-screen even when you press the V ...

  • Philips CCA132AT - page 48

    When you watch a program that is being broadcast with closed captions, you can access on-screen boxes containing the pro- gram’s dialogue (for example, what a character is saying), dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed captions. Not all TV prog ...

  • Philips CCA132AT - page 49

    Closed Caption (cont’d) 49 • You cannot view closed captions during recording or tape playback if COUNTER ONLY is set to ON. • Abbreviations, symbols, and other grammatical shortcuts are often used in order to keep pace with the on-screen action. This does not indi- cate a problem with the TV/VCR. • To cancel closed captions, follow steps 1 ...

  • Philips CCA132AT - page 50

    50 Automatic Operation Features The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab ...

  • Philips CCA132AT - page 51

    Specifications General CRT: 13-inch in line gun Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec. Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C) Relative Humi ...

  • Philips CCA132AT - page 52

    52 Helpful Hints Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR ...

  • Philips CCA132AT - page 53

    Helpful Hints (cont’d) 53 The remote control is not available, or the remote control will not access the pop up menu. • Use the buttons on the front panel of the TV/VCR to access the pop up menu (page 20). You can not enter numbers (for example, to program a timer recording) using the front panel buttons. TV/VCR has no power. • Make sure the ...

  • Philips CCA132AT - page 54

    54 Limited Warranty WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will be repaired or replaced, and labor i ...

  • Philips CCA132AT - page 55

    a-b repeat play . . . . . . . . .38-39 accessories . . . . . . . . . . . . . . .56 ant(enna) jack . . . . . . . . . . .6, 21 audio jack . . . . . . . . . . . 7, 20, 31 automatic playback . . . . . . . . . . . . . . .50 rewind . . . . . . . . . . . . . . . .50 batteries . . . . . . . . . . . . . . . . . .5 blue background . . . . . . . . . . .45 bri ...

  • Philips CCA132AT - page 56

    IB8105E003 Printed In Malaysia 0EMN01547 / T5013XP * * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your TV/VCR; they are provided to help you use or set up your TV/VCR. The following additional items are not provided with your TV/VCR, but they are designed for use with your new TV/VCR. To order these op ...

Manufacturer Philips Category TV VCR Combo

Documents that we receive from a manufacturer of a Philips CCA132AT can be divided into several groups. They are, among others:
- Philips technical drawings
- CCA132AT manuals
- Philips product data sheets
- information booklets
- or energy labels Philips CCA132AT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Philips CCA132AT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Philips CCA132AT, service manual, brief instructions and user manuals Philips CCA132AT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Philips CCA132AT.

Similar manuals

A complete manual for the device Philips CCA132AT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Philips CCA132AT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Philips CCA132AT.

A complete Philips manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Philips CCA132AT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Philips CCA132AT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Philips CCA132AT, that we can find in the current document
3. Tips how to use the basic functions of the device Philips CCA132AT - which should help us in our first steps of using Philips CCA132AT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Philips CCA132AT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Philips CCA132AT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Philips CCA132AT?

Use the form below

If you did not solve your problem by using a manual Philips CCA132AT, ask a question using the form below. If a user had a similar problem with Philips CCA132AT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)