English dropdown-ico

Manual Philips TDA8767

20 pages 0.1 mb
Download

Go to site of 20

Summary
  • Philips TDA8767 - page 1

    DA T A SH EET Preliminary specification Supersedes data of 1997 Jun 27 File under Integrated Circuits, IC02 1999 Feb 16 INTEGRA TED CIRCUITS TDA8767 12-bit high-speed Analog-to-Digital Converter (ADC) ...

  • Philips TDA8767 - page 2

    1999 Feb 16 2 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 FEA TURES • 12-bit resolution • Sampling rate up to 30 MHz •− 3 dB bandwidth of 18 MHz • No missing codes guaranteed • 5 V power supplies • Binary or two’s complement CMOS outputs • In-range CMOS output • T ...

  • Philips TDA8767 - page 3

    1999 Feb 16 3 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 ORDERING INFORMA TION BLOCK DIAGRAM TYPE NUMBER P ACKAGE SAMPLING FREQUENCY (MHz) NAME DESCRIPTION VERSION TDA8767H/1 QFP44 plastic quad flat package; 44 leads (lead length 1.3 mm); body 10 × 10 × 1.75 mm SOT307-2 10 TDA876 ...

  • Philips TDA8767 - page 4

    1999 Feb 16 4 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 PINNING SYMBOL PIN DESCRIPTION n.c. 1 not connected V CCA1 2 analog supply voltage 1 (+5 V) V CCA3 3 analog supply voltage 3 (+5 V) AGND3 4 analog ground 3 n.c. 5 not connected n.c. 6 not connected n.c. 7 not connected n.c. 8 ...

  • Philips TDA8767 - page 5

    1999 Feb 16 5 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 Fig.2 Pin configuration. handbook, full pagewidth TDA8767 MBH143 1 2 3 4 5 6 7 8 9 10 11 33 32 31 30 29 28 27 26 25 24 23 12 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 n.c. n.c. n.c. n.c. n.c. V CCA1 V CCA3 ...

  • Philips TDA8767 - page 6

    1999 Feb 16 6 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 LIMITING V ALUES In accordance with the Absolute Maximum Rating System (IEC 134). Note 1. The supply voltages V CCA , V CCD and V CCO may have any value between − 0.3 V and +7.0 V provided that the supply voltage differences ...

  • Philips TDA8767 - page 7

    1999 Feb 16 7 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 CHARACTERISTICS V CCA =V 2 to V 44 , V 9 to V 10 , V 3 to V 4 and V 41 to V 40 = 4.75 to 5.25 V ; V CCD =V 37 to V 38 and V 15 to V 17 = 4.75 to 5.25 V ; V CCO =V 33 to V 34 = 3.0 to 5.25 V ; AGND and DGND shorted together; T ...

  • Philips TDA8767 - page 8

    1999 Feb 16 8 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 V oltage controlled regulator input V ref (referenced to V CCA ) V ref(FS) full scale fixed voltage V CCA =5V − 3.175 − V V i(p-p) − V i(p-p) input voltage amplitude (peak-to-peak value) differential mode − 2.0 − V ...

  • Philips TDA8767 - page 9

    1999 Feb 16 9 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 Notes to the characteristics 1. The − 3 dB (or − 1 dB) analog bandwidth is determined by the 3 dB (or 1 dB) reduction in the reconstructed output, the input being a full-scale sine wave. 2. THD (total harmonic distortion) ...

  • Philips TDA8767 - page 10

    1999 Feb 16 10 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 T able 1 Output coding with differential inputs (typical values to AGND); V I(p-p) − V I(p-p) = 2.0 V ; V ref =V CCA − 2V T able 2 Output coding with single input (typical values to AGND); V FS = 2.0 V (p-p); V ref =V CCA ...

  • Philips TDA8767 - page 11

    1999 Feb 16 11 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 Fig.3 Timing diagram. handbook, full pagewidth ds t sample N + 1 sample N CLK MBG855 sample N + 2 V l DATA D0 to D11 t d t h CPH t CPL t HIGH LOW 50 % HIGH LOW 50 % DATA N + 1 DATA N DATA N - 1 DATA N - 2 Fig.4 Timing diagram ...

  • Philips TDA8767 - page 12

    1999 Feb 16 12 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 Fig.5 Analog input settling time diagram. handbook, full pagewidth MBD875 50 % STLH t 5 ns code 0 code 1023 I 50 % 2 ns 50 % 5 ns STHL t 50 % 2 ns CLK V ...

  • Philips TDA8767 - page 13

    1999 Feb 16 13 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 APPLICA TION INFORMA TION Fig.6 Application diagram (differential input mode). The analog, digital and output supplies should be separated and decoupled. (1) At power-up a high level clock must be provided within less than 1 ...

  • Philips TDA8767 - page 14

    1999 Feb 16 14 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 Fig.7 Application diagram (single input mode). The analog, digital and output supplies should be separated and decoupled. (1) At power-up a high level clock must be provided within less than 1 µ s or a pull-up resistor must ...

  • Philips TDA8767 - page 15

    1999 Feb 16 15 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 P ACKAGE OUTLINE UNIT A 1 A 2 A 3 b p cE (1) eH E LL p Z y w v θ REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm 0.25 0.05 1.85 1.65 0.25 0.40 0.20 0.25 0.14 10.1 9.9 0.8 1.3 12.9 12.3 1.2 0.8 10 ...

  • Philips TDA8767 - page 16

    1999 Feb 16 16 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 SOLDERING Introduction to soldering surface mount packages This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our “Data Handbook IC26; Integrated Circuit P ...

  • Philips TDA8767 - page 17

    1999 Feb 16 17 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 Suitability of surface mount IC packages for wave and reflow soldering methods Notes 1. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum temperature (with respect to t ...

  • Philips TDA8767 - page 18

    1999 Feb 16 18 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 NOTES ...

  • Philips TDA8767 - page 19

    1999 Feb 16 19 Philips Semiconductors Preliminary specification 12-bit high-speed Analog-to-Digital Converter (ADC) TDA8767 NOTES ...

  • Philips TDA8767 - page 20

    Internet: http://www.semiconductors.philips.com Philips Semiconductors – a worldwide company © Philips Electronics N.V. 1999 SCA62 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or cont ...

Manufacturer Philips Category Network Card

Documents that we receive from a manufacturer of a Philips TDA8767 can be divided into several groups. They are, among others:
- Philips technical drawings
- TDA8767 manuals
- Philips product data sheets
- information booklets
- or energy labels Philips TDA8767
All of them are important, but the most important information from the point of view of use of the device are in the user manual Philips TDA8767.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Philips TDA8767, service manual, brief instructions and user manuals Philips TDA8767. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Philips TDA8767.

Similar manuals

A complete manual for the device Philips TDA8767, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Philips TDA8767 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Philips TDA8767.

A complete Philips manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Philips TDA8767 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Philips TDA8767, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Philips TDA8767, that we can find in the current document
3. Tips how to use the basic functions of the device Philips TDA8767 - which should help us in our first steps of using Philips TDA8767
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Philips TDA8767
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Philips TDA8767 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Philips TDA8767?

Use the form below

If you did not solve your problem by using a manual Philips TDA8767, ask a question using the form below. If a user had a similar problem with Philips TDA8767 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)