-
Gastroback 41409 - page 1
GASTROBACK ® Instructions For Use Design Mincer Advanced Read all provided instructions before first usage! Model and attachments are subject to change Art.-Nr . 41409 Design Mincer Advanced (standard size 8) included accessories: 41409_DesignFleischwolfAdvanced_Manual_GermanEnglisch3.qxp 02.06.2009 15:30 Seite 18 ...
-
Gastroback 41409 - page 2
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. ! Impor tant Instructions • A TTENTION: Always ensure that the appliance is turned off (the contr ol switch should be in OFF position) before connecting the plug to the power outlet. • Never assemble or ...
-
Gastroback 41409 - page 3
20 Display and control switch Name of the units A) Pusher B) Feed pan C) Motor housing D) Screw plug E) Display F) Control switch G) Spanner H) Closing ring I) Grinding disc 2 mm J) Crossed-blade knife K) W orm L) W orm housing M ) Grinding disc 4,5mm N ) Grinding disc 6 m m NOTE: Y ou can store the grinding discs inside the pusher . NOTE: READY is ...
-
Gastroback 41409 - page 4
Design Mincer Advanced (standard size 8) Please read all the advice and instructions with care and keep the manual. The mincer is used for mincing meat (uncooked or cooked) and soft vegetables. Please prepare the ingredients before filling them into the feed chute. Using the pusher you press the food slowly into the worm which pushes it against the ...
-
Gastroback 41409 - page 5
responsible for their safety . Children should be super vised to ensure that they do not play with the appliance. • Store the appliance and units in a dr y , clean area out of reach of children . • The work space has to be easily accessible, solid, even, dr y and of sufficient size. The mincer should only be set up on a firm level work sur face ...
-
Gastroback 41409 - page 6
• T o avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or cleaning. Never clean or operate the appliance or units o f the appliance with abrasive or hard sharp-edged items. Never put the motor housing into the dishwasher for cleaning! This will cause discolouration and ...
-
Gastroback 41409 - page 7
24 Movable and sharp-edged units – risk of injur y • Never put fingers, wooden spoons or other foreign substance (such as hair , clothing, brushes, cloths) into the feed chute or the holes of the grinding disc when the appliance is plugged into the power point. Always ensure that there is no foreign substance (such as bones, stems of vegetables ...
-
Gastroback 41409 - page 8
25 shocks. Never place the appliance on paper towels or uneven working areas. The air has to able to circulate. IMPORT ANT : Always ensure that the plug is not connected to the power outlet before assembling or disassembling the appliance. Place the mincer on a flat, dr y surface such as a bench top. Assembling for mincing 1. Loosen the screw plug ...
-
Gastroback 41409 - page 9
26 4. Mount the grinding disc on the knife. The arresting pin must lock precisely into the corresponding recesses (picture F). IMPORT ANT : If the tools overlap the edges of the worm housing the worm is not placed all the way inside the worm housing. T urn the wor m a little bit to make it fit inside but do not use force. If mounted correctly the g ...
-
Gastroback 41409 - page 10
27 3. Place the sausage attachment on the worm housing (picture J) and fit the closure ring over the sausage attachment. Firmly screw the closing ring on the worm housing and tighten by hand. A TTENTION: Pay attention not to cant the screw . If the screw cants the screw thread gets damaged. If the screw does not turn easily use the provided spanner ...
-
Gastroback 41409 - page 11
28 (hair , towels, cutler y) into the feed chute. Always use the pusher for this purpose! 4 . The display illuminates and you can see for 30 seconds ´Ready` blinking. ´Power`, ´Max`, 6 bars in different length, 6 arrows (3 pointing to the right and 3 pointing t o the left side) and a rotating symbol (picture A) are indicated in the display . Aft ...
-
Gastroback 41409 - page 12
29 4. As soon as the last bit has run through the appliance turn the appliance off (by turning the control switch to OFF) and pull the plug. 5 . Clean and disassemble the appliance right after use and make sure that no leftover food desiccate on the appliance. W ork according to the instructions ´Care and cleaning`. Care and Cleaning W ARNING: Nev ...
-
Gastroback 41409 - page 13
30 TIP: If the tools are stucked knock the mincer carefully on a stable cutting board. The grinding disc should be facing up. A TTENTION: Be careful not to damage your bench top, the cutting board or the mincer . 6. Remove meat residues. Operate as described: A TTENTION: Never put the motor housing in the dishwasher or use abrasives for cleaning! T ...
-
Gastroback 41409 - page 14
31 The motor stops running while operating. The overload protection might got activated. T urn the appliance off immediately and operate according to the instructions ´Clear a blocking`. After cleaning the motor does not get started • I s the power cord plugged in? again when turning the appliance ON. • The motor might be blocked with some har ...
-
Gastroback 41409 - page 15
off (by turning the control switch to OFF), pull the plug and clean the appliance according to the instructions ´Care and Cleaning`. Storage Always clean the appliance before storing. A TTENTION: Store and use the appliance in a clean, frost free environment where i t is protected from dampness, moistness and immoderate and extraordinar y burden ( ...
Do you have a question concerning Gastroback 41409?
Use the form below
If you did not solve your problem by using a manual Gastroback 41409, ask a question using the form below. If a user had a similar problem with Gastroback 41409 it is likely that he will want to share the way to solve it.