Manual Transition Networks 33022.B

12 pages 0.1 mb
Download

Go to site of 12

Summary
  • Transition Networks 33022.B - page 1

    LANMaster™ T8 (E-TBT -HB-0804) 33022.B For assistance in installing, using, or maintaining the TRANSITION Networks LANMaster T8 8-Port Ethernet™ Repeater Hub, contact TRANSITION Networks T echnical Support at: (800) 260-1312 or contact your local distributor . LANMaster™ T8 8-Port Ethernet™ Hub LANMASTER T8 8-PORT HUB SPECIFICA TIONS Standa ...

  • Transition Networks 33022.B - page 2

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 20 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Compliance Information UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations This equipment has been tested ...

  • Transition Networks 33022.B - page 3

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub T able of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The LANMaster T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Networking the LANMaster T8 . . . . . . . . . . . . . . . . . . . . . . .2 Connectors, Switch, Indicators, . . . . . . . . . . . . . . ...

  • Transition Networks 33022.B - page 4

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 18 1 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks LANMaster™ T8 8-Port Ethernet™ Repeater Hub. A working knowledge of local area network (LAN) operations, including familiarity with communications pro ...

  • Transition Networks 33022.B - page 5

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 2 17 Networking the LANMaster T8 The LANMaster T8 Repeater Hub can be installed in an Ethernet network by connecting 10BASE-T cable between RJ-45 connectors at the front of the LANMaster T8 and various network terminal devices. Additionally, LANMaster T8 hubs can be cascaded using twisted-pair 10BASE- ...

  • Transition Networks 33022.B - page 6

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 16 3 Connectors and Indicators CONNECTORS Eight (8) straight-through RJ-45 connectors , labeled 1-8, and one (1) crossover RJ-45 connector , labeled X, are located on the front of the LANMaster T8. One (1) AUI connector , one (1) BNC connector , and one (1) AC power supply adapter connector are locate ...

  • Transition Networks 33022.B - page 7

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 4 15 4. OPERA TION The LANMaster T8 requires no intervention beyond occasionally monitoring the Power and Status LEDs. Monitoring Status LEDs Steady green Act(ivity) LED indicates connection of the LANMaster T8 to external AC powerr. Blinking green Act(ivity) LED indicate network traffic. Steady green ...

  • Transition Networks 33022.B - page 8

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 14 5 Powering the LANMaster T8 To power ON the LANMaster T8: 1. Verify that the LANMaster T8 power supply adapter is the correct one for the site installation. 2. At LANMaster T8 back, locate the power receptacle. 3. Connect the LANMaster T8 power connector end of the power supply adapter to LANMaster ...

  • Transition Networks 33022.B - page 9

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 6 13 Installing LANMaster T8 at Site NOTE: Mounting brackets, screws, and rubber feet are provided. To install the LANMaster T8 on table or other flat surface : 1. Carefully turn LANMaster T8 to side. 2. Install four (4) rubber feet (included with packing material): • Separate rubber feet. • Remov ...

  • Transition Networks 33022.B - page 10

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 12 7 Installing Network Cable 10BASE-T Requirements STRAIGHT-THROUGH/CROSSOVER CABLE/CONNECTOR NOTE: The 10BASE-T cable and RJ-45 jacks for hub to terminal device connections must be configured as straight through . The 10BASE-T cable and RJ-45 jacks for hub to hub connections must be configured as cr ...

  • Transition Networks 33022.B - page 11

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub Installing T wisted-Pair 10BASE-T Cable To connect 10BASE-T Cable to LANMaster T8 RJ-45 connectors: 1. Locate or build 10BASE-T cables that are: • 802.3 compliant (See page 20.) • with straight through connector/cable configuration (See page 7.) • with male RJ-45 plug connectors at both ends. 2. ...

  • Transition Networks 33022.B - page 12

    LANMaster™ T8 8-Port Ethernet™ Repeater Hub 10 9 10-Mb/s Baseband Network Configuration Guidelines Ethernet 802.3 specifications define network configuration guidelines for the 10-Mb/s baseband network: 10BASE-T, 10BASE-2, and 10BASE-5 cable segments can be installed as a single Ethernet collision domain if the cable segments are connected usin ...

Manufacturer Transition Networks Category Switch

Documents that we receive from a manufacturer of a Transition Networks 33022.B can be divided into several groups. They are, among others:
- Transition Networks technical drawings
- 33022.B manuals
- Transition Networks product data sheets
- information booklets
- or energy labels Transition Networks 33022.B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Transition Networks 33022.B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Transition Networks 33022.B, service manual, brief instructions and user manuals Transition Networks 33022.B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Transition Networks 33022.B.

A complete manual for the device Transition Networks 33022.B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Transition Networks 33022.B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Transition Networks 33022.B.

A complete Transition Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Transition Networks 33022.B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Transition Networks 33022.B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Transition Networks 33022.B, that we can find in the current document
3. Tips how to use the basic functions of the device Transition Networks 33022.B - which should help us in our first steps of using Transition Networks 33022.B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Transition Networks 33022.B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Transition Networks 33022.B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Transition Networks 33022.B?

Use the form below

If you did not solve your problem by using a manual Transition Networks 33022.B, ask a question using the form below. If a user had a similar problem with Transition Networks 33022.B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)