Manual Polycom 6000

12 pages 0.64 mb
Download

Go to site of 12

Summary
  • Polycom 6000 - page 1

    July 2008 Edition 1725-36127-001 Version F Installing the Outdoor Base Station SpectraLink 6000 System ...

  • Polycom 6000 - page 2

    Installing the Outdoor Base Station 1725-36127-001-F .doc 2 Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom , Inc. i n the United States of America and vari ous countries. All other trademarks used herein are the p roperty of their respective owners. Pa ...

  • Polycom 6000 - page 3

    1725-36127-001-F .doc 3 About this Guide The Outdoor Base Station is designed to withstand environmental hazards such as rain and excessive heat and cold. The outdoor enclosure is mounted into position and the Base Station is then installed within it. The entire unit is then referred to as an Outdoor Base Station. This document covers the installa ...

  • Polycom 6000 - page 4

    Installing the Outdoor Base Station 1725-36127-001-F .doc 4 For Technical Support: technicalsupport@polycom.com For Knowledge Base: http://www.polycom.com/usa/e n/ suppor t/voic e/voice.html For Return Material Authorization: rmacoordinator@polycom.com ...

  • Polycom 6000 - page 5

    1725-36127-00 1-F.doc 5 Contents 0 About this Guide ................................................ 3 Polycom Corporation Model Numbers 3 Related Documents 3 Contacting Polycom 3 1 Installing Flush Against a Wall or Hard Ceiling .... 6 2 Installing on an I-Beam ....................................... 8 3 Installing on a Light Pole or Electrical Po ...

  • Polycom 6000 - page 6

    1725-36127-001-F .doc 6 Installing Flush Against a Wall or Hard Ceiling Items provided: Outdoor enclosure, Base Station Items needed: 4 anchor bolts (length and type depends on wall or ceiling material Base Station is being mounted to) 1. Mark and drill four holes into the wall or ceiling, using the mounting flanges of the outdoor enclosure as a gu ...

  • Polycom 6000 - page 7

    Installing Flush Agai nst a Wall or Hard Ceiling 1725-36127-001-F .doc 7 4. Crimp an RJ45 onto the Base Station cable using the same wiring guide as the indoor Base Station. 5. Plug the RJ45 into the RJ48C connector. 6. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the wall or ceiling. The ...

  • Polycom 6000 - page 8

    1725-36127-001-F .doc 8 Installing on an I-Beam Items provided : Outdoor enclosure, Base Station Items needed : 4 – “Caddy” or “B-Line” 3/8” Beam Clamps 4 – 1/2” long 1/4” x 20 bolts 4 – 2” long 1/4” x 20 bolts 4 – 1/4” x 20 nuts 1. Attach a beam clamp to the center of the top and bottom flanges on the outdoor enclosure. ...

  • Polycom 6000 - page 9

    Installing on an I-Beam 1725-36127-001-F .doc 9 7. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the I-beam. The Base Station should fit tightly between the foam blocks. 8. Screw the outdoor enclosure lid back onto the enclosure. ...

  • Polycom 6000 - page 10

    1725-36127-001-F .doc 10 Installing on a Light Pole or Electrical Pole Items provided: Outdoor enclosure, Base Station Items needed: 4 - “Caddy” or “B-Line” 3/8” beam clamps 2 - EOG 100 or equivalent band clamps 1. Attach one band to the top flange of the outdoor enclosure using two beam clamps (see the figure below). 2. Attach the second ...

  • Polycom 6000 - page 11

    Installing on a Light Pole or an Electrical Pole 1725-36127-001-F .doc 11 7. Place the Base Station into the enclosure with the side of the Base Station with the mounting hole facing the pole. The Base Station should fit tightly between the foam blocks. 8. Screw the outdoor enclosure lid back onto the enclosure. ...

  • Polycom 6000 - page 12

    P N: 1725-36127-001-F.doc ...

Manufacturer Polycom Category Cordless Telephone

Documents that we receive from a manufacturer of a Polycom 6000 can be divided into several groups. They are, among others:
- Polycom technical drawings
- 6000 manuals
- Polycom product data sheets
- information booklets
- or energy labels Polycom 6000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Polycom 6000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Polycom 6000, service manual, brief instructions and user manuals Polycom 6000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Polycom 6000.

Similar manuals

A complete manual for the device Polycom 6000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Polycom 6000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Polycom 6000.

A complete Polycom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Polycom 6000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Polycom 6000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Polycom 6000, that we can find in the current document
3. Tips how to use the basic functions of the device Polycom 6000 - which should help us in our first steps of using Polycom 6000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Polycom 6000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Polycom 6000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Polycom 6000?

Use the form below

If you did not solve your problem by using a manual Polycom 6000, ask a question using the form below. If a user had a similar problem with Polycom 6000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)