Manual Hoshizaki KM-1900SRH/3

38 pages 2.57 mb
Download

Go to site of 38

Summary
  • Hoshizaki KM-1900SRH/3 - page 1

    Issued: 1-6-2009 Revised: 11-8-2010 Hoshizaki “A Superior Degr ee of Reliability” www .hoshizaki.com Models KM-1900SAH/3 KM-1900SWH/3 KM-1900SRH/3 Stackable Crescent Cuber Hoshizaki America, Inc. INST RU CT ION MA NU AL ™ ...

  • Hoshizaki KM-1900SRH/3 - page 2

    2 IMPOR T ANT Only quali ed ser vice t echnicians should install, service, and maintain the icemaker . No installation, service, or maintenance should be under t ak en until the technician has thor oughly r ead this Instruction Manual. Like wise, the o wner/ manager should not proceed t o operate the icemak er until the installer has instructed ...

  • Hoshizaki KM-1900SRH/3 - page 3

    3 IMPOR T ANT This manual should be r ead car efull y bef ore the icemak er is installed and operat ed. Only quali ed ser vice technicians should inst all, ser vice , and maintain the icemak er . Read the w ar nings cont ained in this booklet car efull y as they giv e impor tant inf or mation reg arding saf et y . Please retain this booklet f or ...

  • Hoshizaki KM-1900SRH/3 - page 4

    4 Impor tant Saf ety Inf or mation Throughout this man ual, notices appear t o bring your at tention t o situations which could result in death, serious injur y , or damage to the unit. W ARNING Indicates a hazar dous situation which could r esult in death or serious injury . C A UTION Indicates a sit uation which could result in dama ge to the uni ...

  • Hoshizaki KM-1900SRH/3 - page 5

    5 See the nameplate f or electrical and refrigeration specications. This nameplate is locat ed on the rear panel. Since this nameplate is locat ed on the rear panel of the icemak er , it cannot be r ead when the back of the icemak er is against a w all or ag ainst another piece of kitchen equipment. Theref ore , the necessar y electr ical and r ...

  • Hoshizaki KM-1900SRH/3 - page 6

    6 See the nameplate f or electrical and refrigeration specications. This nameplate is locat ed on the rear panel. Since this nameplate is locat ed on the rear panel of the icemak er , it cannot be r ead when the back of the icemak er is against a w all or ag ainst another piece of kitchen equipment. Theref ore , the necessar y electr ical and r ...

  • Hoshizaki KM-1900SRH/3 - page 7

    7 See the nameplate f or electrical and refrigeration specications. This nameplate is locat ed on the rear panel. Since this nameplate is locat ed on the rear panel of the icemak er , it cannot be r ead when the back of the icemak er is against a w all or ag ainst another piece of kitchen equipment. Theref ore , the necessar y electr ical and r ...

  • Hoshizaki KM-1900SRH/3 - page 8

    8 See the nameplate f or electrical and refrigeration specications. This nameplate is locat ed on the rear panel. Since this nameplate is locat ed on the rear panel of the icemak er , it cannot be r ead when the back of the icemak er is against a w all or ag ainst another piece of kitchen equipment. Theref ore , the necessar y electr ical and r ...

  • Hoshizaki KM-1900SRH/3 - page 9

    9 See the nameplate f or electrical and refrigeration specications. This nameplate is locat ed on the rear panel. Since this nameplate is locat ed on the rear panel of the icemak er , it cannot be r ead when the back of the icemak er is against a w all or ag ainst another piece of kitchen equipment. Theref ore , the necessar y electr ical and r ...

  • Hoshizaki KM-1900SRH/3 - page 10

    10 6. KM-1 90 0SRH3 (r emote air -cooled) See the nameplate f or electrical and refrigeration specications. This nameplate is locat ed on the rear panel. Since this nameplate is locat ed on the rear panel of the icemak er , it cannot be r ead when the back of the icemak er is against a w all or ag ainst another piece of kitchen equipment. Theref ...

  • Hoshizaki KM-1900SRH/3 - page 11

    11 Note: When used with a stor age bin not r ecommended b y Hoshizaki, the icemak er needs the space at the bot tom opening as in the illustration. Unit: in. [mm] B. Dimensions/Connections 1 . KM-1 90 0SAH/3 ...

  • Hoshizaki KM-1900SRH/3 - page 12

    12 Note: When used with a stor age bin not r ecommended b y Hoshizaki, the icemak er needs the space at the bot tom opening as in the illustration. 2. KM-1 90 0SWH/3 Unit: in. [mm] ...

  • Hoshizaki KM-1900SRH/3 - page 13

    13 3. KM-1 90 0SRH/3 Note: When used with a stor age bin not r ecommended b y Hoshizaki, the icemak er needs the space at the bot tom opening as in the illustration. Unit: in. [mm] ...

  • Hoshizaki KM-1900SRH/3 - page 14

    14 II. Installation and Operating Instr uctions W ARNING 1 . This icemaker m ust be installed in accor dance with applicable national, stat e, and local codes and regulations . 2 . CHOKING HAZARD: Ensure all components, f astener s, and thumbscre ws are secur ely in place af ter inst allation. Make sur e that none ha v e f allen into the stor age b ...

  • Hoshizaki KM-1900SRH/3 - page 15

    15 C. Location C A UTION 1 . This icemaker is not int ended for outdoor use . Nor mal operating ambient temper atur e should be within 45°F t o 1 00°F (7°C to 38°C); Nor mal oper ating wat er temperatur e should be within 45°F to 90°F (7°C to 32°C). Operation of the icemaker , f or e xt ended periods, outside of these normal temperatur e ra ...

  • Hoshizaki KM-1900SRH/3 - page 16

    16 6) Install the bin contr ol thermostat as f ollows: a. Remov e the baf f le fr om the st orage bin. b . Remo v e the tie secur ing the bin contr ol thermostat assembl y . Remo v e the 2thumbscre wsandthe"Z"brack et. c. Remov e the bin control thermostat assembl y from the shipping hook b y lif ting it up and shif ting it ...

  • Hoshizaki KM-1900SRH/3 - page 17

    17 If a Hoshizaki B-1 30 0, B-1 50 0, B-1 650, or non-Hoshizaki st or age bin is used: g. R emov e the 2 scre ws securing the ther mostat b ulb at tachment (plastic) t o the ther most ate xtensionbrac ket(stainless). Usethe2scre wstoat tachthe"Z"brac k et (plastic) to the thermostat e xtension brac k ...

  • Hoshizaki KM-1900SRH/3 - page 18

    18 8) C ar efull y r emov e the ther mostat b ulb from the ther most at b ulb at tachment (plastic) of the upper unit. 9) C ar efull y r out e the ther most at b ulb and capillar y tubing of the upper unit thr ough the bot tom hole of the upper unit. Remo v e the bushing fr om the low er bin contr ol thermostat assembl y . Rout e the bulb and tubin ...

  • Hoshizaki KM-1900SRH/3 - page 19

    19 F . Electr ical Connection W ARNING F or All Models 1 . Electrical connection must be hard-wir ed and must meet national, state , and local electrical code requir ements. F ailure t o meet these code requir ements could result in death, electric shoc k, serious injur y , re , or sev ere damage t o equipment. 2. This unit requires an independe ...

  • Hoshizaki KM-1900SRH/3 - page 20

    20 F ig. 8b KM-1 90 0S_H3 KM-1 90 0S_H F ig. 8a •Onsinglephasemodels,thewhit eleadmustbeconnectedt otheneutralconductorof the pow er sour ce. C A UTION! Miswiring ma y result in sev ere damage t o the icemak er . SeeF ig . 8a. •Onthreephasemodels ,thetransf or mer’ svolt ...

  • Hoshizaki KM-1900SRH/3 - page 21

    21 G. Installation of Remot e Condenser Unit W ARNING 1 . Installation of the r emot e condenser unit must be perf or med b y pr operly trained and EP A -cer tied service personnel. 2. The remote condenser unit m ust be installed in accor dance with applicable national, stat e , and local codes and r egulations. 3. F ailure to inst all the equip ...

  • Hoshizaki KM-1900SRH/3 - page 22

    22 4. Line Set C A UTION The icemaker , line set, and remot e condenser unit must contain the same type of refrigerant. Mixing of r efrigerants will result in impr oper operation and possible damage t o the refrigeration s y stem. •P r echar gedf act or ylinesets ,av ailab leasoptionalequipmentfr omHoshizaki Ameri ...

  • Hoshizaki KM-1900SRH/3 - page 23

    23 d. Tighten the connection with a wr ench until it is tight. At this point, the nut has cov ered most of the thr eads on the male  t ting. e. Mark a ref erence line on the f emale coupling and the r emot e condenser unit or icemaker panel. Using a bac kup wr ench on the back of the f emale coupling, tight en the six -sided nut of the f emale c ...

  • Hoshizaki KM-1900SRH/3 - page 24

    24 6) Ev acuat e thr ough the Schrader access por ts on the P arker quic k connect couplings and charge with R-404A r efr iger ant v apor t o a pr essur e of 1 5 to 30 PSIG. 7) Connect the r efr igerant lines t o the appropriate male  t tings on the remot e condenser unit rst and then at the icemak er . Make a pr oper connection as follo ws: ...

  • Hoshizaki KM-1900SRH/3 - page 25

    25 5. Refr igerant Char ge (Line Set Ex ceeding 66 Feet) C A UTION The icemaker , line set, and remot e condenser unit must contain the same type of refrigerant. Mixing of r efrigerants will result in impr oper operation and possible damage t o the refrigeration s y stem. The maximum line length f or the standard r efr igerant char ge is 66 feet. S ...

  • Hoshizaki KM-1900SRH/3 - page 26

    26 1) Remo ve the louv er panel. See Fig . 1 5. 2) Remo ve the junction bo x cov er on the r emot e condenser unit. Remov e the f an mot or junction bo x co v er on the icemak er . 3) Install a gr ound wire fr om the icemak er t o the r emot e condenser unit. Use wire of an appropriat e g age and outdoor rating . 4) Install line and neutral wir es ...

  • Hoshizaki KM-1900SRH/3 - page 27

    27 H. W ater Supply and Dr ain Connections See F ig. 1 7 , 1 8, and 1 9 W ARNING 1 . W at er suppl y and drain connections m ust be installed in accor dance with applicable national, st at e , and local r egulations. 2. Nor mal operating w at er temper atur e should be within 45°F t o 90°F (7°C to 32°C). Operation of the icemak er , f or ext en ...

  • Hoshizaki KM-1900SRH/3 - page 28

    28 KM-1 90 0SAH/3 KM-1 90 0SRH/3 Bin Drain Outlet 3/4" FPT Icemaker W ater Supply Line Shut-Off V alve Icemaker W ater Supply Line Drain V alve Icemaker W ater Supply Inlet 1/2" FPT Icemaker Drain Outlet 3/4" FPT Condensation Drain Outlet 3/8" OD Hard T ube Bin Icemaker Remote Condenser Line Set Connections Separate piping to ap ...

  • Hoshizaki KM-1900SRH/3 - page 29

    29 KM-1 90 0SWH/3 Connection T o An Open Drain S yst em Condenser Water Supply Inlet 1/2" FPT Icemaker W ater Supply Inlet 1/2" FPT Icemaker Drain Outlet 3/4" FPT Condensation Drain Outlet 3/8" OD Hard T ube Condenser Drain Outlet 3/8" FPT Bin Icemaker Separate piping to approv ed drain. Leav e a 2 inch (5 cm) vertical air ...

  • Hoshizaki KM-1900SRH/3 - page 30

    30 F ig. 1 9 KM-1 90 0SWH/3 Connection T o A Closed Loop S y stem Bin Drain Outlet 3/4" FPT Condenser Water Supply Line Shut-Off V alve Condenser W ater Supply Line Drain V alve Icemaker W ater Supply Line Shut-Off V alv e Icemaker W ater Supply Line Drain V alve Condenser Return Outlet 3/8" FPT Icemaker W ater Supply Inlet 1/2" FPT ...

  • Hoshizaki KM-1900SRH/3 - page 31

    31 I. F inal Chec klist W ARNING CHOKING HAZARD: Ensure all components , fast eners, and thumbscr ews are secur ely in place af ter inst allation. Make sur e that none ha v e f allen into the stor age bin. 1) Is the icemaker le v el? 2) Is the icemaker in a sit e where the ambient t emperatur e is within 45°F to 1 00°F (7°C to 38°C) and the wat ...

  • Hoshizaki KM-1900SRH/3 - page 32

    32 J . Star t up W ARNING 1 . All par ts are f actory -adjust ed. Improper adjustments ma y adver sel y af f ect saf ety , performance, component lif e, and warr anty cov erage . 2. If the icemaker is tur ned of f, w ait f or at least 3 minutes bef ore r estar ting the icemaker t o pre vent damage t o the compr essor . 3. T o pre v ent damage to th ...

  • Hoshizaki KM-1900SRH/3 - page 33

    33 III. Cleaning and Maintenance IMPOR T ANT Ensure all components , fast eners, and thumbscr ews ar e secur el y in place af ter any cleaning or maint enance is done to the equipment. A. Cleaning and Sanitizing Instructions Hoshizaki recommends cleaning this icemak er at least once a year . More fr equent cleaning, ho we v er , ma y be requir ed i ...

  • Hoshizaki KM-1900SRH/3 - page 34

    34 1 . Cleaning P r ocedur e 1)Dilute38 . oz. (1,1 24ml)ofHoshizaki"Scale A wa y"with7gal. (26l)ofwar mw ater . 2) Remo ve all ice fr om the e vaporat or and the storage bin. Note: T o r emo v e cubes on the e vaporat or , tur n of f the power suppl y and tur n it on af ter 3 minut ...

  • Hoshizaki KM-1900SRH/3 - page 35

    35 22)Mov ethecontrols witchtothe"W ASH"position. 23) Replace the fr ont panel in its correct position. 24) T ur n on the pow er suppl y to rinse of f the cleaning solution. 25) T ur n of f the power suppl y af ter 5 min ut es. 26) Remo ve the fr ont panel and the insulation panel. 27) Remo ve the cap locat ed on t ...

  • Hoshizaki KM-1900SRH/3 - page 36

    36 B. Maintenance Instr uctions IMPOR T ANT This icemaker m ust be maintained individuall y , ref err ing t o the instruction manual and labels pr o vided with the icemak er . 1 . Stainless St eel Exter ior T o pre vent corr osion, wipe the e xterior occasionally with a clean, sof t cloth. Use a damp cloth containing a neutral cleaner t o wipe of f ...

  • Hoshizaki KM-1900SRH/3 - page 37

    37 2. Drain the w at er tank: 1) T ur n of f the power suppl y , then r emo v e the fr ont panel. Mov e the contr ol s witch to the "OFF"position. 2) Remo ve the insulation panel. Remo v e the cap locat ed on the fr ont bot tom par t of the ice dropping hole . See Fig . 20. Allow the w at er tank t o drain. 3) Replace the cap and the i ...

  • Hoshizaki KM-1900SRH/3 - page 38

    38 HOSHIZAKI AMERICA, INC. 618 Hwy . 74 S., Peachtree Cit y, GA 30269 USA TEL (770) 487-2331 F AX (770) 487-3360 www .hoshizaki.com 91A1SJ10C ...

Manufacturer Hoshizaki Category Ice Maker

Documents that we receive from a manufacturer of a Hoshizaki KM-1900SRH/3 can be divided into several groups. They are, among others:
- Hoshizaki technical drawings
- KM-1900SRH/3 manuals
- Hoshizaki product data sheets
- information booklets
- or energy labels Hoshizaki KM-1900SRH/3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hoshizaki KM-1900SRH/3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hoshizaki KM-1900SRH/3, service manual, brief instructions and user manuals Hoshizaki KM-1900SRH/3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hoshizaki KM-1900SRH/3.

A complete manual for the device Hoshizaki KM-1900SRH/3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hoshizaki KM-1900SRH/3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hoshizaki KM-1900SRH/3.

A complete Hoshizaki manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hoshizaki KM-1900SRH/3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hoshizaki KM-1900SRH/3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hoshizaki KM-1900SRH/3, that we can find in the current document
3. Tips how to use the basic functions of the device Hoshizaki KM-1900SRH/3 - which should help us in our first steps of using Hoshizaki KM-1900SRH/3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hoshizaki KM-1900SRH/3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hoshizaki KM-1900SRH/3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hoshizaki KM-1900SRH/3?

Use the form below

If you did not solve your problem by using a manual Hoshizaki KM-1900SRH/3, ask a question using the form below. If a user had a similar problem with Hoshizaki KM-1900SRH/3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)