English dropdown-ico

Manual D-Link DP-G310

88 pages 6.12 mb
Download

Go to site of 88

Summary
  • D-Link DP-G310 - page 1

    Manual Building Networks for People Wireless USB Print Server D-Link DP-G310 Air Plus G ...

  • D-Link DP-G310 - page 2

    2 Content s Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Wireless Basics .................................................................................... 8 Installation Considerations ...

  • D-Link DP-G310 - page 3

    3 D-Link DP-G310 Wireless USB Print Server Manual and W arranty on CD Printed Quick Installation Guide    Package Content s If any of the above items are missing, please contact your reseller. System Requirement s: A computer with an installed Ethernet adapter for initial configuration purposes only  Windows XP/2000/ME/98SE, Mac OS with ...

  • D-Link DP-G310 - page 4

    4 The D-Link DP-G310 Print Server is an 802.1 1g wireless USB 2.0 high-speed Print Server that can also connect to your Ethernet/Fast Ethernet network. Now you can locate USB printer services virtually anywhere in your home or office. The DP-G310 manages the flow of print files from workstations or file servers to connected printers, delivering pri ...

  • D-Link DP-G310 - page 5

    5 External Features Port Connectors The DP-G310’s USB port is located on its rear panel. The USB can be configured using the PS Admin program or the print server ’s T elnet interface. (See the PS Admin User ’ s Guide , available on the CD that came with the DP-G310, for information about configuring the print server ’s ports.) The Print Ser ...

  • D-Link DP-G310 - page 6

    6 USB Ethernet WLAN Power Front Panel LED Indicators There are two front panel indicators, each holding two separate LEDs (aligned in a vertical position). As shown below , the first indicator holds the Power and the USB LED. The second indicator holds the Ethernet and WLAN LED. Upon boot-up, the Power light stays on continuously and all other LEDs ...

  • D-Link DP-G310 - page 7

    7 Network Cable Connector The Print Server ’s rear p anel has a LAN port for CA T5 Ethernet cabling. The port support s the NW ay protocol, allowing the Print Server to automatically detect or negotiate the transmission speed of the network. DC Power Connector The DC power input connector is located on the Print Server ’s rear panel and is labe ...

  • D-Link DP-G310 - page 8

    8 D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. Y ou will be able to enjoy the freedom that wireless network ...

  • D-Link DP-G310 - page 9

    9 St andards-Based T echnology Based on the IEEE 802.1 1g standard, the DP-G310 is interoperable with existing compatible 2.4GHz wireless technology with data transfer speeds of up to 54Mbps when used with other D-Link Air Plus G devices. Wireless Basics (cont.) Installation Considerations The D-Link Air Plus G DP-G310 lets you print through your n ...

  • D-Link DP-G310 - page 10

    10 Setting up the DP-G310 Inst alling the Print Server W ARNING: Configuration problems may result if the Print Server is powered up without first establishing its network connection. Follow this procedure to avoid complications at the configuration stage. Confirm proper operation of your printer before connecting the DP-G310. 1. When you have conf ...

  • D-Link DP-G310 - page 11

    11 Immediately after power-up, three of the green LEDs should illuminate steadily for several seconds. Then the USB LED should flash three times. Irregularity of the LED during this LED test may mean there is a problem with the LED itself. The actual component tests immediately follow the LED tests. A normal (no fault) result is signaled by a flash ...

  • D-Link DP-G310 - page 12

    12 When you enter the default IP address, the main screen of the Print Server’s con- figuration will appear (see below). In addition to the product information, you can access and control the Print Server ’s configuration through four links on the top of this main screen: Home, Configuration, T ools , and Help . Please use an Ethernet connectio ...

  • D-Link DP-G310 - page 13

    13 Home Click on the Home tab from the tools bar of the main screen to display information about the DP-G310’s System Status and Printer Status . As shown below , the System displays the status of your print server , printer and network. Clicking Refresh will update the information. Home > System Device St atus: Information about the print ser ...

  • D-Link DP-G310 - page 14

    14 Using the Web Configuration (continued) Home > Wireless Click the Wireless button in the left column to display information about the wireless LAN. Clicking Refresh will update the information. Wireless Status: The items in this field display information about the wireless LAN, such as the connection mode (Infrastructure or Ad-Hoc), SSID, cha ...

  • D-Link DP-G310 - page 15

    15 Click the Network button in the left column to display information about the wireless LAN. Clicking Refresh will update the information. Using the Web Configuration (continued) Home > Network Auto IP: This field contains the current settings of TCP/IP , including DHCP/ BOOTP , UPnP , and MAC Rendezvous. The items in this field are configured ...

  • D-Link DP-G310 - page 16

    16 Click the User button in the left column to display the user ’s information. Using the Web Configuration (continued) Home > User Users Printing Log: The items in this field display the user(s) information, which include the user(s) Mac address, IP address, name, and status of printing tasks. ...

  • D-Link DP-G310 - page 17

    17 Configuration Click on the Configuration tab from the tools bar of the main screen to enter the configuration page; it provides the configuration options that include System De- vice and Port Setting System Device and Port Setting This option will show you settings required to configure the DP-G310 Print Server . Consult your printers owner manu ...

  • D-Link DP-G310 - page 18

    18 Using the Web Configuration (continued) Configuration > System Device and Port Setting Server Name: Assign a name to the print server . Location (optional): Assign a location for the print server . Admin cont act (optional): Assign the Admin’s cont act name for the print server . Port Settings In this field, you can assign the Port Name for ...

  • D-Link DP-G310 - page 19

    19 Connection Mode: Select one of two connection modes:  Infrastructure (default): Connect to an existing wireless AP or router in a WLAN.  Ad-Hoc: Connect to wireless clients in the Peer-to-Peer mode. Using the Web Configuration (continued) Configuration > Wireless SSID: Assign the SSID in this box. Y ou can manually input the name or sel ...

  • D-Link DP-G310 - page 20

    20 Using the Web Configuration (continued) Network ...

  • D-Link DP-G310 - page 21

    21 Using the Web Configuration (continued) Configuration > Network TCP/IP This field contains three options that allow you to configure the TCP/IP setting: IP Address: This option allows you to set the IP address manually or automatically . When you choose Manually Assign , you should enter the related information in the following boxes, includi ...

  • D-Link DP-G310 - page 22

    22 Using the Web Configuration (continued) Configuration > User Printing Control By configuring the Enable User Printing Control option ( Y es or No ), the user in the User List is permitted to access the print server or not. Define Users Y ou can add/delete the user(s) to/from the User List. The User List at the bottom of the screen displays th ...

  • D-Link DP-G310 - page 23

    23 Using the Web Configuration (continued) Configuration > SNMP SNMP Management SNMP (Simple Network Management Protocol) is a set of protocols for managing complex networks. Community 1/2/3: Enter a name in the Name box, and configure the Access Right by selecting Read Only or Read/Write from the pull-down menu. Click Apply if you have made cha ...

  • D-Link DP-G310 - page 24

    24 T ools Using the Web Configuration (continued) Print T est Click T est to print a test page. Click on the T ools link from the tools bar of the main screen to enter the T ools Page; it provides the control options that include Print T est , E-mail, Reset, Upgrade, and Backup . T ools > Print T est ...

  • D-Link DP-G310 - page 25

    25 Using the Web Configuration (continued) T ools > Email Y ou can assign an E-mail address to the print server , so that the mail from the account can be printed out directly through the printer (ASCII test only). T o enable this function, enter the E-mail account in the Print Server E-mail Address box. Incoming E-mail (POP3) Server Address: En ...

  • D-Link DP-G310 - page 26

    26 Using the Web Configuration (continued) T ools > Email (continued) E-mail Notification Y ou can set the print server to send a message through E-mail when the printer status changes. T o enable this function, set the Enable e-mail notification for printer status changing option to Ye s . Then, input the administrator ’s Email address in the ...

  • D-Link DP-G310 - page 27

    27 Using the Web Configuration (continued) T ools > Upgrade Firmware Upgrade When a new version of firmware is available (e.g., downloaded from the manufacturer ’s website), you can upgrade the firmware of your print server . Click Browse to locate the firmware file, then click Apply . ...

  • D-Link DP-G310 - page 28

    28 Using the Web Configuration (continued) T ools > Backup Backup Device Configuration to File Click Apply to backup your current configuration of the print server to file and then save in the computer . Restore Device Configuration from File Y ou can reload a configuration that you saved before. Click Browse to point to the backup file, and the ...

  • D-Link DP-G310 - page 29

    29 Using the Web Configuration (continued) Help Click on the Help link from the tools bar of the main screen to enter the Help Page. It provides a link to D-Link’s support website. D-Link’s support website will provide the most up to date information on your DP-G310 Print Server . Please check the website regularly for product and firmware upda ...

  • D-Link DP-G310 - page 30

    30 TCP/IP Printing for Windows XP Open the web browser , and type in the IP Address of the DP-G310. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key . Note: The PC’s IP Address must be in the same subnet as the Print Server ’s IP Address for the two devices to communicate. (For example, i ...

  • D-Link DP-G310 - page 31

    31 TCP/IP Printing for Windows XP (continued) At the Configuration window , write down the Port Name for future reference. Y ou will need this information later in the configuration process. ...

  • D-Link DP-G310 - page 32

    32 TCP/IP Printing for Windows XP (continued) Select your Connection Mode Enter the SSID of the remote access point or wireless router you wish to connect to. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply ...

  • D-Link DP-G310 - page 33

    33 TCP/IP Printing for Windows XP (continued) When you select TCP/IP Protocol at the Network window , the screen below appears. (We recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (Y ou may wish to make a note of the IP address.) ...

  • D-Link DP-G310 - page 34

    34 Go to Start > Settings > Printers and Faxes > Add a Printer Click Next TCP/IP Printing for Windows XP (continued) ...

  • D-Link DP-G310 - page 35

    35 TCP/IP Printing for Windows XP (continued) Select Local Printer Click Next Select Create a new port. At the pull-down menu, highlight Standard TCP/IP Port. Click Next Click Next Deselect Automatically detect and install my Plug and Play printer . ...

  • D-Link DP-G310 - page 36

    36 Click OK Input the Port Name of the port being used by the printer . Select LPR Select Custom Then click Settings TCP/IP Printing for Windows XP (continued) T ype in the IP address of the Print Server (i.e. 192.168.0.10). The Port Name will automatically be filled in. ...

  • D-Link DP-G310 - page 37

    37 Click Finish TCP/IP Printing for Windows XP (continued) Click Next Highlight the printer , as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next ...

  • D-Link DP-G310 - page 38

    38 At this screen, you can input a name for the printer . Click Next Click Next TCP/IP Printing for Windows XP (continued) Click Finish ...

  • D-Link DP-G310 - page 39

    39 TCP/IP Printing for Windows 2000 Open the Web browser , and type in the IP Address of the DP-G310. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key . Note: The PC’s IP Address must be in the same subnet as the Print Server ’ s IP Address for the two devices to communicate. (For example ...

  • D-Link DP-G310 - page 40

    40 TCP/IP Printing for Windows 2000 (continued) At the Configuration window , write down the Port Names for future reference. Y ou will need this information later in the configuration process. ...

  • D-Link DP-G310 - page 41

    41 TCP/IP Printing for Windows 2000 (continued) Select your Connection Mode Enter the SSID of the remote access point or wireless router to which you wish to connect. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply . ...

  • D-Link DP-G310 - page 42

    42 TCP/IP Printing for Windows 2000 (continued) When you select TCP/IP Protocol at the Network window , the screen below appears. (We recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (Y ou may wish to make a note of the IP Address.) ...

  • D-Link DP-G310 - page 43

    43 Go to Start > Settings > Printers Double-click on the Add Printer icon. Click Next TCP/IP Printing for Windows 2000 (continued) ...

  • D-Link DP-G310 - page 44

    44 TCP/IP Printing for Windows 2000 (continued) Select Local Printer Click Next Select Create a new port at the pull-down menu, highlight Standard TCP/IP Port. Click Next ...

  • D-Link DP-G310 - page 45

    45 TCP/IP Printing for Windows 2000 (continued) Click Next Click Next T ype in the IP address of the Print Server in the Printer Name or IP Address field. The Port Name field will automatically be filled in. Select “Custom” Then click on Settings . ...

  • D-Link DP-G310 - page 46

    46 TCP/IP Printing for Windows 2000 (continued) Click Finish Click OK Input the port name of the port being used by the printer . Select LPR Click Next ...

  • D-Link DP-G310 - page 47

    47 TCP/IP Printing for Windows 2000 (continued) At this screen, you can input a name for the printer . Click Next Click Next Highlight the printer , as shown. If the desired printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. ...

  • D-Link DP-G310 - page 48

    48 Click Finish The printer is now ready for printing with Windows 2000 on your network. TCP/IP Printing for Windows 2000 (continued) Click Next Select Do not share this printer . . Select Y es to print a test page. Click Next ...

  • D-Link DP-G310 - page 49

    49 TCP/IP Printing for Windows 98SE/Me Open the web browser , and type in the IP Address of the DP-G310. For example, type http://192.168.0.10 into the Location or Address field. Press the Enter or (Return) Key . Note: Y our PC’s IP Address must be in the same subnet as the Print Server ’ s IP Address for the two devices to communicate. (For ex ...

  • D-Link DP-G310 - page 50

    50 TCP/IP Printing for Windows 98SE/Me (continued) At the Configuration window , write down the Port Name for future reference. Y ou will need this information later in the configuration process. The Port Name shown here is only an example. ...

  • D-Link DP-G310 - page 51

    51 TCP/IP Printing for Windows 98SE/Me (continued) Select your Connection Mode. Enter the SSID of the remote access point or wireless router to which you wish to connect. If you would like to set WEP Encryption, select the encryption level and the key here. Click Apply . ...

  • D-Link DP-G310 - page 52

    52 TCP/IP Printing for Windows 98SE/Me (continued) When you select TCP/IP Protocol at the Network window , the screen below will appear . (W e recommend that you keep the default settings as shown.) If you need to make changes, make sure to click Apply after you have made the changes. (Y ou may wish to make a note of the IP address.) ...

  • D-Link DP-G310 - page 53

    53 TCP/IP Printing for Windows 98SE/Me (continued) Click Add Highlight Client Click Add Go to Start > Settings > Control Panel Double-click on Network ...

  • D-Link DP-G310 - page 54

    54 TCP/IP Printing for Windows 98SE/Me (continued) At this window , click Have Disk. Click OK to accept the location of the file. 2 3 1 4 1. 2. 3. Highlight lpr .inf 4. Click OK Insert the DP-G310 CD-ROM into your CD-ROM drive. Select the letter representing the CD-ROM drive on your computer from the pull-down menu. Double-click on the folder lpr . ...

  • D-Link DP-G310 - page 55

    55 TCP/IP Printing for Windows 98SE/Me (continued) Click OK Y ou should now be back to the Network Properties Page. Highlight LPR for TCP/IP Printing. Click Properties ...

  • D-Link DP-G310 - page 56

    56 TCP/IP Printing for Windows 98SE/Me (continued) The Port name and IP Address will be displayed. (The Port Name at right is just an example.) Click OK T ype in the IP Address of the DP-G310. Make sure the Port Name is accu- rate. (The Port Name at right is just an example.) Click OK Click Add Port ...

  • D-Link DP-G310 - page 57

    57 Click OK Windows will ask for a restart. Click Ye s TCP/IP Printing for Windows 98SE/Me (continued) ...

  • D-Link DP-G310 - page 58

    58 Once your computer has rebooted, click on St art > Settings > Printers > Add Printer When the Add Printer Wizard screen appears, click Next. Select Network Printer . Click Next T ype in the path if you know it, or click Browse. TCP/IP Printing for Windows 98SE/Me continued) ...

  • D-Link DP-G310 - page 59

    59 TCP/IP Printing for Windows 98SE/Me (continued) At the next screen, browse for the printer port. Highlight the port as shown. (The Port Name in this window is just an example.) Click OK If the network path is not specified, type in the IP Address of the DP-G310 and the Port Name. (The Port Name shown at right is just an example.) Select Ye s or ...

  • D-Link DP-G310 - page 60

    60 TCP/IP Printing for Windows 98SE/Me (continued) Select Ye s to print a test page. Click Finish Go to Start > Settings > Printers Check to see that your printer is installed. ...

  • D-Link DP-G310 - page 61

    61 Unix/Linux Printing Please refer to the PS Admin Manual on the CD included with your purchase for information on setting up the Print Server in Unix/Linux. ...

  • D-Link DP-G310 - page 62

    62 Setting up Apple T alk or LPR Printing in Mac OS X At the Configure pull-down menu, select Manually . Open your System Preferences window and Click Network. With Mac OSX you can use AppleT alk or LPR printers using IP protocols for printing through Print Servers. Follow the instructions below for setting up the Print Server . After attaching the ...

  • D-Link DP-G310 - page 63

    63 The default IP address of the Print Server is 192.168.0.10. Manually change your IP Address to 192.168.0.x, where x is any number between 1 and 254 (except 10 which is the IP Address of the Print Server .) The IP Addresses and Subnet Mask shown here are examples only . Setting up Apple T alk or LPR Printing in Mac OS X (continued) Select the App ...

  • D-Link DP-G310 - page 64

    64 Setting up Apple T alk or LPR Printing in Mac OS X (continued) T o print, open a document and select File > Print from the menu. Select Edit Printer List from the Printer dialog box. Click Add Printer . ...

  • D-Link DP-G310 - page 65

    65 Setting up Apple T alk or LPR Printing in Mac OS X (continued) Select the printing protocol preferred, AppleT alk or LPR Printers using IP . AppleT alk protocol: After selecting AppleT alk the Port Name of the Print Server will be dis- played. The Port Name shown here is an example only . Click on the Port to which the PostScript printer is conn ...

  • D-Link DP-G310 - page 66

    66 Setting up Apple T alk or LPR Printing in Mac OS X (continued) LPR Printers using IP protocol: When you select LPR Printers using IP Proto- col, this window will ap- pear . T ype the IP Address of the Print Server into the LPR Printer ’ s Address field . In the Queue Name field, type in the Port Name of the PostScript printer that is connected ...

  • D-Link DP-G310 - page 67

    67 Setting up Apple T alk Printing in Mac OS 9 The AppleT alk network protocol is used with computers using the MacOS operating system. It can be used for network communications over standard Ethernet or Fast Ethernet using the EtherT alk transport, or over a proprietary low-speed LocalT alk transport. Y our Print Server can be used for network pri ...

  • D-Link DP-G310 - page 68

    68 Printing from Mac OS Client W orkst ations The exact procedure for selecting a PostScript printer connected to your Print Server may vary slightly , depending on what printer driver version you are using. The procedure described below assumes you are using the LaserWriter 8. T o choose a printer connected to your Print Server as your Mac OS work ...

  • D-Link DP-G310 - page 69

    69 Printing from Mac OS Client Workst ations (continued) If you have not previously set this printer as the default, your computer will prompt you for a PostScript Printer Description file. Choose Select PPD. If you wish to access this setting in the future, you can use the Setup button in the Chooser window . The selected printer will become your ...

  • D-Link DP-G310 - page 70

    70 Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsof t Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsof t.com/windows2000 for information about networking computers using Windows 2000, ME or ...

  • D-Link DP-G310 - page 71

    71 Networking Basics (continued) Please follow all the instructions in this window: Click Next In this window , select the best description of your computer . If your computer connects to the Internet through a gateway/router , select the second option as shown. ...

  • D-Link DP-G310 - page 72

    72 Networking Basics (continued) Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next ...

  • D-Link DP-G310 - page 73

    73 Networking Basics (continued) Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer . This may take a few minutes. ...

  • D-Link DP-G310 - page 74

    74 Networking Basics (continued) In this window , select the best option. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Insert a disk into the Floppy Disk Drive, in this case drive A. Format the disk if you wish, and click Next. Click Next ...

  • D-Link DP-G310 - page 75

    75 Networking Basics (continued) Please wait while the Network Setup Wizard copies the files. Please read the information under Here’ s how in the screen below . After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. T o continue, click Next. ...

  • D-Link DP-G310 - page 76

    76 Networking Basics (continued) The new settings will take effect when you rest art the computer . Click Ye s to re- start the computer . Y ou have completed configuring this computer . Next, you will need to run the Net- work Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your ne ...

  • D-Link DP-G310 - page 77

    77 Networking Basics (continued) How to assign a Name to your computer T o name your computer , please follow these directions in Windows XP : Click Start (in the lower left corner of the screen) Right-click My Computer Select Properties       Select the Computer Name tab in the System Properties window . Y ou may enter a Computer ...

  • D-Link DP-G310 - page 78

    78 Networking Basics (continued) How to assign a Name to your Computer  I n this window , enter the Computer name. Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name. Click OK    How to find your IP Address in W indows XP The computers connected to your network must be i ...

  • D-Link DP-G310 - page 79

    79 Networking Basics (continued) How to find your IP Address in W indows XP This window will appear . Click the Support tab Click Close   Assigning a S tatic IP Address in W indows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the com- puters on the network, using DHCP (Dynamic Host Configuration Protocol) techn ...

  • D-Link DP-G310 - page 80

    80 Networking Basics (continued) Assigning a S tatic IP Address in W indows XP/2000  Double-click Network Connections   Double-click Properties Right-click Local Area Connections ...

  • D-Link DP-G310 - page 81

    81 Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) Networki ...

  • D-Link DP-G310 - page 82

    82 T echnical S pecifications Printer Connection Printer Port: USB 2.0 Bidirectional Communication: Network Connection Network St andards: IEEE 802.3 10Base-T Ethernet, IEEE 802.1 1g Wireless S tandard Network Dat a T ransfer Rate: 10/100 Mbps (megabits per second), up to 54Mbp s Network Connector: CA T5 cable Network Protocols Ethernet Frame T ype ...

  • D-Link DP-G310 - page 83

    83 Y ou can find software updates and user document ation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone. T ech Support fo ...

  • D-Link DP-G310 - page 84

    84 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United S tates, the ...

  • D-Link DP-G310 - page 85

    85 After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replac ...

  • D-Link DP-G310 - page 86

    86 Governing Law : This Limited W arranty shall be governed by the laws of the S tate of California. Some st ates do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limit ations and exclusions may not apply . This limited warranty provides specific lega ...

  • D-Link DP-G310 - page 87

    87 The Canon Printer Canon BJC-55, 85 Canon S100SP Canon S200SP Canon S300 Canon S330 Canon S400SP Canon S450 Canon S520 Canon S600 Canon S750 Canon S4500 Canon S6300 Canon S9000 The Epson Printer Epson S tylus Color 900 Epson S tylus Color 1 160 Epson S tylus Color 2200 Epson S tylus Photo 720 Epson S tylus Photo 810, 820, 830, 890 Epson S tylus P ...

  • D-Link DP-G310 - page 88

    88 Appendix: DP-G310 Printer Com p atibility List for W indows (continued) Other printers from the brands listed above may also be supported. For an updated compatibility list please visit: http://www .support.dlink.com The Lexmark Printer Lexmark 4039 10R Lexmark 5700 Lexmark Optra Color 45 Lexmark Optra C710 Lexmark Optra E, E+, E310 Lexmark Optr ...

Manufacturer D-Link Category Printer

Documents that we receive from a manufacturer of a D-Link DP-G310 can be divided into several groups. They are, among others:
- D-Link technical drawings
- DP-G310 manuals
- D-Link product data sheets
- information booklets
- or energy labels D-Link DP-G310
All of them are important, but the most important information from the point of view of use of the device are in the user manual D-Link DP-G310.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals D-Link DP-G310, service manual, brief instructions and user manuals D-Link DP-G310. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product D-Link DP-G310.

Similar manuals

A complete manual for the device D-Link DP-G310, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use D-Link DP-G310 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of D-Link DP-G310.

A complete D-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual D-Link DP-G310 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the D-Link DP-G310, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the D-Link DP-G310, that we can find in the current document
3. Tips how to use the basic functions of the device D-Link DP-G310 - which should help us in our first steps of using D-Link DP-G310
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with D-Link DP-G310
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of D-Link DP-G310 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning D-Link DP-G310?

Use the form below

If you did not solve your problem by using a manual D-Link DP-G310, ask a question using the form below. If a user had a similar problem with D-Link DP-G310 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)