English dropdown-ico

Manual Snapper E281318BE, E331518KVE

36 pages 0.79 mb
Download

Go to site of 36

Summary
  • Snapper E281318BE, E331518KVE - page 1

    Safety Instructions & Operator’s Manual for EUROPEAN REAR ENGINE RIDING M OWER SERIES 18 MODELS E281318BE E331518KVE MODEL NUMBER EXPLA NA TION E 28 10 18 K V E EUROPEA N MODEL ENGINE OP T IONS CUTT ING WIDTH ENGINE T YPE ENGINE HP ENGINE MODEL SERIES DESIGNATION E - European Model 28 - 28” Cutting Deck 33 - 33” Cutting Deck 13 - 13.0 HP ...

  • Snapper E281318BE, E331518KVE - page 2

    2 IM PORTA NT SA FETY INSTRUCTIONS WARNING: This pow erful cutt ing machine is capable o f amputating hands and feet and can throw objects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons. The owner of the machine must understa n ...

  • Snapper E281318BE, E331518KVE - page 3

    3 IM PORTA NT SA FETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine , and STOP mach ine if anyone enters th e area. 8. Check shields, deflect ors, switches, b lade controls an d other safet y devices frequent ly for proper oper ation and location. 9. Make s ...

  • Snapper E281318BE, E331518KVE - page 4

    4 TA BLE OF CONTENTS IMPORTA NT SA FETY INST RUCTION S .......................................................... 2-3 TA BL E OF C ONT ENT S ...................................................................................... 4 SEC TION 1 - FA MILIA RIZA T ION .................................................................... 5-7 Decals / Symbo ...

  • Snapper E281318BE, E331518KVE - page 5

    5 Section 1 - FA MILIA RIZA TION FIGURE 1.1 1.1 INTRODUCT ION This manual has been pr epared for the operator’s of the SNAPPER Rear Engine Rider. Its pur pose, aside fr om recom m ending standard operating proc edures and routine servic e requirem ents, is to promote SAFET Y through the use of acc epted operating practices . Read, Understand a nd ...

  • Snapper E281318BE, E331518KVE - page 6

    6 Section 1 – FA MILIA RIZA TION – DECA LS / SYMBOLS SERI AL NUMBER DE CAL 01015 W ARNING DECA L 22841 EUROPEAN NOISE CONTROL DECA L 23009 FUEL CAUTION DECA L - 29113 PA TENT NUMBERS DECA L - 2-9470 EUROPEAN COMM UNITY DECA L 29776 CHUTE W ARNING DECA L 29784 BA TTERY STORAGE DECA L - 29948 DEFLECTOR CA UTION DECA L 29839 BA TTERY CAUT ION DECA ...

  • Snapper E281318BE, E331518KVE - page 7

    7 Section 1 – FA MILIA RIZA TION – DECA LS / SYMBOLS BLA DE ENGA GED POSITIO N BLA DE DISEN GA GED POSITIO N ENGINE SPEED CONT ROL SYMBOLS BLA DE LEVER POSITIO N SYMBOLS RA BBI T “FA ST” TURTLE “SLOW” CHOKE POSITIO N ENGINE SPEED CONTROL A UTOM ATIC BLADE STOP DECA L - 24072 CLUTCH/BRA KE DECA L - 2-8514 TRACTION CLUTCH PA RK BRA KE E N ...

  • Snapper E281318BE, E331518KVE - page 8

    8 Section 2 - OPERA TING INSTRUCTIONS 2.1 PR E-START CHECK LIST Make the following c hecks and perform the servic e required bef ore each start-up. 2.1.1. Check tires and add or r elease air as needed to bring pressure to 12 psi in fr ont and 12 psi in rear tires. 2.1.2. Check guards , deflectors and covers to m ake sure all are in plac e and secur ...

  • Snapper E281318BE, E331518KVE - page 9

    9 Section 2 - OPERA TING INSTRUCTIONS 2.3 ST A RTING & OPERA TION 2.3.1. ENGINE (ELECTRIC START) IMPO RTANT: W hen the ignition k ey is turned to “START ”, the engine will turn over, but will not start unless the Clutc h/Brake pedal is pressed all the way down, the Blade Lever is in the “Off ” position (See Figure 2.5).T he operator sho ...

  • Snapper E281318BE, E331518KVE - page 10

    10 Section 2 - OPERA TING INSTRUCTIONS 2.3 ST A RTING & OPERA TION 2.3.1. ENGINE (ELE CTRIC START) (Continued) 8. Should the battery be too weak to start the engine, Refer to Section “ENG INE (MANUAL ST ART)” to manually start the electr ic start engines. 2.3.2. ENG INE (MANUA L ST A RT ) IMPO RTANT: W hen the ignition k ey is turned to “ ...

  • Snapper E281318BE, E331518KVE - page 11

    11 Section 2 - OPERA TING INSTRUCTIONS WA RNING Once blade is dise ngaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate afte r 3 seconds, the blade brake must be adjust ed. Refer to Section “BLA DE BRA KE A DJUST M ENT” fo r adjustment pro cedures or return machine to an authorized SNAPPER dealer for ...

  • Snapper E281318BE, E331518KVE - page 12

    12 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT leave machine with the engine running. Stop engine. Stop blade . Shift to neutral. Engage parking brake. Remov e key. 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.1. ENGINE 1. Stop engine by tur ning k ey to the “OFF ” position. See Figure 2.13. FIGURE 2.13 2.4.2. WHEEL DRIVE 1. Stop mot ...

  • Snapper E281318BE, E331518KVE - page 13

    13 Section 2 - OPERA TING INSTRUCTIONS 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.4. PA RK BRA KE 1. Engage park brak e by pushing clutch/brake pedal “DOW N” and m oving the park brake lever to the “ON” position. W hile holding the park brake lever “ON”, release clutch/brak e pedal to set park brak e. See Figure 2.16. WA RNING DO N ...

  • Snapper E281318BE, E331518KVE - page 14

    14 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rking ...

  • Snapper E281318BE, E331518KVE - page 15

    15 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool before wo rking ...

  • Snapper E281318BE, E331518KVE - page 16

    16 Section 3 - MA INTENA NCE 3.2.8. LUBRICA T ION – GREA SE FITT INGS The f ollowing components on the Rear Engine Rider are equipped with grease fittings and require periodic lubrication. Apply General Purpose greas e (NLGI No.2) with a grease gun. 1. F ront W heel Bear ings. Refer to Section “FRON T W HEEL BEARINGS – LUBR ICATION” . 2. Re ...

  • Snapper E281318BE, E331518KVE - page 17

    17 Section 3 - MA INTENA NCE 3.3 SERV ICE - EVERY 25 OPER A TING HOURS 3.3.8. REAR A XLE BEA RING - LUBRICA T ION 1. The lef t rear axle bearing on 28” and 30” mac hines requires thr ee shots of gener al purpose grease f rom gr ease gun. See Figure 3.7. NOTE: Som e m odels are equipped with a pre- lubricated sealed bear ing and require no addit ...

  • Snapper E281318BE, E331518KVE - page 18

    18 SECTION 3 – MA INTENA NCE 3.4 SERV ICE - A NNUALLY 3.4.1. Per form all m aintenance as specif ied in “MAINTENANCE SCHEDULE” Section of this m anual. 3.4.2. FUEL FILT ER Service fuel f ilter as inst ructed below, on COLD ENGINE ONL Y ! IMPO RTANT: T o stop flow of f uel, tank m ay be rem oved from br acket and set on the floor s o the fuel ...

  • Snapper E281318BE, E331518KVE - page 19

    19 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage parkin g brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool bef ...

  • Snapper E281318BE, E331518KVE - page 20

    20 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool bef ...

  • Snapper E281318BE, E331518KVE - page 21

    21 SECTION 4 - A DJUSTMENTS & REPA IR FIGURE 4.4 WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts ...

  • Snapper E281318BE, E331518KVE - page 22

    22 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool bef ...

  • Snapper E281318BE, E331518KVE - page 23

    23 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool bef ...

  • Snapper E281318BE, E331518KVE - page 24

    24 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool bef ...

  • Snapper E281318BE, E331518KVE - page 25

    25 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustmen ts, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage parkin g brake. Remove key. Remove spark plug w ire from spark plug and secure away from plug. E ngine and components are HOT. A void serious burns, allow all parts to cool bef ...

  • Snapper E281318BE, E331518KVE - page 26

    26 Section 4 - A DJUSTMENTS & REPA IR WA RNING The elect rolyte (acid) produ ces a highly explosive gas. Keep all sparks, flame and fire away from area w hen charging battery or when handling electr olyte or battery . Electroly te (acid) is a highly c orrosive liquid. Wear eye protection . Wash affected areas immediately after hav ing eye or sk ...

  • Snapper E281318BE, E331518KVE - page 27

    27 Section 4 - A DJUSTMENTS & REPA IR 4.6.6. BA T TERY T ESTING Battery Condition Chart State of Charge Syr inge Hydr ome ter Digital Voltmeter Five Ball Hydr ometer 100% Charged w/ Sulfate Stop 1.280 12.80v Five Balls Floating 100% Charged 1.265 12.60v Four Balls F loating 75% Charged 1.210 12.40v Three Balls Floating 50% Charged 1.160 12.10v ...

  • Snapper E281318BE, E331518KVE - page 28

    28 TROUBLESHOOTING PROBL EM PROBA B LE CAUSE CORRE CTIVE A CT ION Engine Will Not 1 . F u el ta n k em p ty. 1. Fill fuel tank with fresh f uel to proper level. Start Using 2. Engine needs chok ing. 2. Move chok e control to “CHOKE” position. Recoil Starter 3. Spark plug wire disconnec ted. 3. Place spark plug wire onto spark plug. 4. Faulty pa ...

  • Snapper E281318BE, E331518KVE - page 29

    29 TROUBLESHOOTING PROBLEM PROBA BLE CA USE CORRE CT IVE A CTION Rider Will Not M ove 1. Drive disc worn or damaged. 1. Replace drive disc . Loss Of T raction 2. Rubber drive disc is not track ing properly on drive disc . 2. Adjust r ubber drive disc. 3. Tapered ax le bolt and nut miss ing. 3. Replac e with SNA PPER tapered bolt & nut. 4. Axle ...

  • Snapper E281318BE, E331518KVE - page 30

    30 MAINTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PA G ES EA CH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS E A CH SEA SON Engine Check Oil Lev el Page 8 X Engine Initial Oil Change Page 14 X Engine Periodic Oil Cha nge Page 14 X* A ir Pre-Cleaner Service Sponge Pr e- Cleaner Element Engine Manual X* * A ir Clean er Replace Element Eng ...

  • Snapper E281318BE, E331518KVE - page 31

    31 MAINTENA NCE/REPLA CEM ENT PA RTS MAINTENA NCE PA RTS Engine Speed Control (B riggs Engine) 2-4155 Engine Speed Control (K ohler Engine) 2-2483 Clutch/Brake Cable 2-9913 Brake Cable 2-2344 28” Cutter Blad e (Standard - Not A ir Lift Compatible) 3- 5635 28” Cutter Blad e (Standard - Air Lift Compatible) 1-9515 28” Cutter Blad e (Mu lching) ...

  • Snapper E281318BE, E331518KVE - page 32

    32 3 YEA R LIMITED W A RRANTY For thr ee ( 3) years from purc hase date f or the original purc haser's residential, non- com m erc ial use, SNAPPER , through any authorized SNA PPER dealer will replace, free of char ge (exc ept for taxes where applic able), any part or par ts found upon exam ination by the f actory at McDonough, Georgia, to be ...

  • Snapper E281318BE, E331518KVE - page 33

    33 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ _________________ ...

  • Snapper E281318BE, E331518KVE - page 34

    34 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ _________________ ...

  • Snapper E281318BE, E331518KVE - page 35

    35 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ _________________ ...

  • Snapper E281318BE, E331518KVE - page 36

    36 Safety Instructions & Operator’s Manual for EUROPEAN REAR ENGINE RIDING MOWER SERIES 18 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines contai n very importa nt emissions informa tion and critical safety warnings. Read, Unde ...

Manufacturer Snapper Category Lawn Mower

Documents that we receive from a manufacturer of a Snapper E281318BE, E331518KVE can be divided into several groups. They are, among others:
- Snapper technical drawings
- E281318BE, E331518KVE manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper E281318BE, E331518KVE
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper E281318BE, E331518KVE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper E281318BE, E331518KVE, service manual, brief instructions and user manuals Snapper E281318BE, E331518KVE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper E281318BE, E331518KVE.

Similar manuals

A complete manual for the device Snapper E281318BE, E331518KVE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper E281318BE, E331518KVE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper E281318BE, E331518KVE.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper E281318BE, E331518KVE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper E281318BE, E331518KVE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper E281318BE, E331518KVE, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper E281318BE, E331518KVE - which should help us in our first steps of using Snapper E281318BE, E331518KVE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper E281318BE, E331518KVE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper E281318BE, E331518KVE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper E281318BE, E331518KVE?

Use the form below

If you did not solve your problem by using a manual Snapper E281318BE, E331518KVE, ask a question using the form below. If a user had a similar problem with Snapper E281318BE, E331518KVE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)