-
Tyco 1928L - page 1
Touchmonitor User Guide 1928L 19” LCD Desktop Touchmonitor 5000 Series ...
-
Tyco 1928L - page 2
User Guide 1928L 19” LCD Desktop Touchmonitor Revision C P/N E1 16103 ...
-
Tyco 1928L - page 3
Copyright © 2007 Tyco Electronics Corporation. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise wi ...
-
Tyco 1928L - page 4
Warnings and Cautions Warning • Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other flammable materials. • To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or moisture. • Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the ...
-
Tyco 1928L - page 5
Caution • Power cord is used as a disconnection device. To de-energize equipment, disconnect the power cord. • This unit must follow the national requirement and local state laws to dispose unit. • Before connecting the cables to your Elo touchmonitor, make sure all components are powered OFF. Only approved components complying with IEC60601- ...
-
Tyco 1928L - page 6
CAUTION-Life Support Care must be taken when this touchmonitor is a critical component of a life support system or device. In case of failure of this touchmonitor, appropriate redundant systems should be incorporated into the system or device to prevent injury to the user or patient. The following should be an integral part of the safety design of ...
-
Tyco 1928L - page 7
Classification With respect to electrical shock, fire in accordance with UL60601-1 and CAN/CSA C22.2 No. 60601-1 This monitor is a Class I (GROUNDED) DEVICE. These displays are classified NO APPLIED PARTS EQUIPMENT. Protection against harmful ingress of water: INGRESS PROTECTION (IPX1) This monitor shall be classified as ORDINARY EQUIPMENT, not int ...
-
Tyco 1928L - page 8
viii European Standards and Classifications Standards: EN 60601-1-2: 2001 The EMC limits and test methods are referred to the following standards: Emission: Immunity CISPR 11: 2003+A1:2004 IEC 61000-4-2: 2001 AS/NZS CISPR 11:2004 IEC 61000-4-3: 2002+A1:2002 (Group 1, Class B) IEC 61000-4-4: 2004 IEC 61000-4-5: 2001 EN55011: 1998+A1: 1999+ IEC 61000 ...
-
Tyco 1928L - page 9
Guida nce a nd ma nufa cturer’s declaration-ele ctromagnetic e missions The ET1928L is intended for use in the electromagnetic environment specified below . The customer or the user of the ET1928L should a ssure that it is used in such a n environment. Emissions test Complia nce Electromagnetic environment-guidelines RF emissions Group 1 The ET19 ...
-
Tyco 1928L - page 10
Guida nce a nd ma nufactur er’s declaration-electr omagnetic i mmunity- for all EQUIPMENT AND SYSTEMS Guida nce a nd ma nufa ctur er’s de claration-electr omagnetic i mmunity The ET1928L is intended for use in the electromagnetic environment specified below . The customer or the user of the ET1928L should assure that it is used in such a n envi ...
-
Tyco 1928L - page 11
Guida nce a nd ma nufa cturer’s declaration-ele ctromagnetic i mmunity The ET1928L is intended for use in the electromagnetic environment specified below . The user of the ET1928L should a ssure that it is used in such a n environment. Immunity te st IEC 60601 test level Complia nce Electr omagnetic environment-guideline s level Portable a nd mob ...
-
Tyco 1928L - page 12
Recommended se paration dista nce s between por table a nd mobile RF communications equi pment a nd the ET1928L The ET1928L is intended f or use in a n electromagnetic environment in which ra d i ated RF disturba nces are controlled. The customer or the user of the ET1928L ca n help prevent electromagnetic interference by maintaining a mini- mum di ...
-
Tyco 1928L - page 13
Warnings and Cautions ................................................. iv Warning ................................................................. iv Caution ................................................................... v Caution-Life Support ..................................................... vi Classification ........................... ...
-
Tyco 1928L - page 14
...
-
Tyco 1928L - page 15
C H A P T E R 1 I NTRODUCTION Product Description The 1928L is a medical display designed to present information to the operator and the customer. The 1928L is available in serial and USB(combo) touch interface as well as non-touch. The 1928L functionally consists of a 19” LCD main display with a touchscreen. The main display element is a 19” d ...
-
Tyco 1928L - page 16
LCD Display Performance Features 19” TFT LCD Display Panel Display format 1280 x 1024 Display area 376.32 mm (H) x 301.056 mm (V) Pixel pitch 0.294 mm (H) x 0.294 mm (V) Contrast Ratio 1300:1( typical) Brightness LCD 300 cd/m 2 (typical) AccuTouch 246 cd/m 2 (typical) IntelliTouch 276 cd/m 2 (typical) Accutouch transmission 82% (typical) Intellit ...
-
Tyco 1928L - page 17
C H A P T E R 2 I NSTALLATION A ND S ETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following items are present and in good condition: LCD monitor VGA cable USB cable Serial Cable European power cable Power cable US/Canada DVI Cable CD ...
-
Tyco 1928L - page 18
Product Overview Main Unit Back Unit Side View 2-4 Elo Touchmonitor User Guide ...
-
Tyco 1928L - page 19
Base Bottom View Kensington TM Lock The Kensington TM lock is a security device that prevents theft. To find out more about this secu- rity device, go to http://www.kensington.com. 2-5 ...
-
Tyco 1928L - page 20
Touch Interface Connection Note: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. STEP 1-Connecting the Video Cable • Tilt the screen up and back to access the connection ports. • Connect the 15-pin video cable (the ferrite bead end) or 24-pin DVI-D cable to the video port on y ...
-
Tyco 1928L - page 21
STEP 2-Connecting the Serial and USB Touchscreen Cable • Connect the female end of the serial (RS-232) cable to the serial port on your PC, or connect the USB( ) touchscreen cable to the USB( ) touchscreen connector on the back of your touchmonitor. • Connect the male end of the cable to the serial touchscreen connector on your touchmonitor, or ...
-
Tyco 1928L - page 22
STEP 3-Connecting the Speaker Cable • Connect the light blue end of the speaker cable to the light blue speaker port to the monitor (audio in). • Connect the lime (light green) end of the speaker cable to the lime speaker port on the computer (audio out). SPEAKER CABLE SPEAKER PORT CONNECTIONS ON UNDERSIDE 2-8 Elo Touchmonitor User Guide ...
-
Tyco 1928L - page 23
STEP 4-Connecting the Power Cable Depending on where you live, you will use either the European or US/Canadian power cable. • Connect the female end of the power cable to the medical grade power adaptor. • Connect the brick power cable into the power port on the touchmonitor. • Route the cable through the cable management channel. NOTE: To pr ...
-
Tyco 1928L - page 24
Mounting the Display Your medically certified touchscreen display conforms to the VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI) standard. The FPMPMI standard defines a physical mounting interface for flat panel displays. Your display conforms to the corresponding standards for flat panel display mounting devices, such as for walls an ...
-
Tyco 1928L - page 25
2-11 Rear Mounting Using the VESA Interface 1 If the display is already connected to a pedestal, remove the four screws that connect the pedestal to the display (refer to Figure2-1 , item 1 ). Separate the pedestal from the display. 2 Reinstall the four screws into the VESA interface mount. Ensure that the monitor is positioned with the correct sid ...
-
Tyco 1928L - page 26
Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution, and make sure the timing of the display mode is compatible with the LCD display. Refer to Appendix A for more information about resolution. Compatible video mode ...
-
Tyco 1928L - page 27
C H A P T E R 3 O PERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1280 x 1024 at 60-75 H ...
-
Tyco 1928L - page 28
Side Panel Controls Control Function 1 Menu/Exit Display/Exits the OSD menus. 2 1. Enter contrast of the OSD. 2. Increase value of the adjustment item. 3. Shuffle item clockwise. 3 1. Enter audio volume adjustment. 2. Decrease value of the adjustment item. 3. Shuffle item counter-clockwise. 4 Select 1.Select the adjustment items from the OSD menu. ...
-
Tyco 1928L - page 29
Controls and Adjustment OSD Menu Functions To Display and Select the OSD Functions: 1 Press the Menu key to activate the OSD menu. 2 Use or to move clockwise or counterclockwise through the menu. Press the select key on the monitor. The parameter will be highlighted when selected. 3 To quit the OSD screen at any time during the operation, press the ...
-
Tyco 1928L - page 30
OSD Control Options Control Description Contrast Increases or decreases contrast. Brightness Increases or decreases brightness. V-Position Moves the screen up or down. H-Position Moves the screen left or right. Recall Defaults Returns the monitor to its default settings. Color Balance Press or and “Select” button to select 9300, 6500, 5500, 750 ...
-
Tyco 1928L - page 31
Power Display & Power Saving General Power Saving Mode Power Mode Consumption On 48w max. Sleep 7w max. Off 4w Power-Save (No Input) • The LCD panel background is cut when there is no signal input (AC line power consump tion of 7w or less). Note: If the monitor is not to be used for an extended period of time, it is recommended that the monit ...
-
Tyco 1928L - page 32
3-18 Elo Touchmonitor User Guide ...
-
Tyco 1928L - page 33
3-19 C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the prob- lem persists, please contact your local dealer or our service center. Elo Technical Support num- bers are listed on page 31 of this manual. Solutions to Common Problems Problem Suggestion(s) The monitor does not r ...
-
Tyco 1928L - page 34
3-20 Elo Touchmonitor User Guide ...
-
Tyco 1928L - page 35
A P P E N D I X A N ATIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. 1928L native resolution is 1280 x 1024. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but not increase it. Input ...
-
Tyco 1928L - page 36
As an example, a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically. Input video is also represented by the same terms. XGA input video has a format of 1280 pixels horizontally by 1024 pixels vertically. When the input pixels contained in the video input format match the native resolution of the panel, there is a one to ...
-
Tyco 1928L - page 37
A P P E N D I X B T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation). 1. To reduce the risk of electric shock, follow all s ...
-
Tyco 1928L - page 38
Care and Handling of Your Touchmonitor The following tips will help keep your Elo touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the external power adaptor or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning. • ...
-
Tyco 1928L - page 39
A P P E N D I X C T ECHNICAL S PECIFICATIONS Display Modes Your Elo touchmonitor is compatible with the following standard video modes: Item Resolution Type H.Scan(KHz) V. Scan(Hz) Polarity 1 640 x 350 VGA 31.47 70 +/- 2 720 x 400 VGA 31.47 70 -/+ 3 640 x 480 VGA 31.47 60 -/- 4 640 x 480 MAC 66 35 66 -/ - 5 640 x 480 VESA 72 37.86 72 -/ - 6 640 x 4 ...
-
Tyco 1928L - page 40
Touchmonitor Specifications Parameter Value LCD Display 19.0” TFT Active Matrix Panel Pixel Pitch 0.294(H) x 0.294(V) mm Display Mode VGA 640 x 350 (70 Hz) VGA 720 x 400 (70 Hz) VGA 640 x 480 (60 / 72 / 75 Hz) SVGA 800 x 600 (56 / 60 / 72 / 75 Hz) SXGA 1280 x 1024 (60,70,75 Hz) Native SXGA 1280 x 1024 Contrast Ratio 1300 : 1 (typical) Brightness ...
-
Tyco 1928L - page 41
Power Supply Cord Selection North America Power Supply Cord Detachable, UL Listed, Type SJT 3 conductor, 18 AWG, configured load fittings terminating in molded on parallel blade. Grounding type hospital grade attachment plug, rated at a minimum of 3 amperes. Basic Cord Type Equivalent Types SP-2 SPE-2, SPT-2 SP-3 SPE-3, SPT-3 SV SVE, SVO, SVOO, SVT ...
-
Tyco 1928L - page 42
Cord selection for other than North America For 100 V ac or 220/230/240 V ac operation, the unit is provided with IEC 320 flexible power cords properly configured for the intended country other than North America. The NOMINAL cross-sectional area (mm2 Cu) must be 0,75. For assistance in selecting the proper power cord contact the Elo distributor in ...
-
Tyco 1928L - page 43
C-29 HAR FLEXIBLE CORD Approval Organization Printed or Embossed Alternative Marking Harmonization Marking (May Utilizing Black-Red be Located On Jacket or Yellow Thread (Length Insulation of Internal Wiring) of color Section, mm) Comite Electrotechnique CEBEC <HAR> 10 30 10 Belge (CEBEC) Verband Deutscher Elektrotechniker (VDE) e.V. <VDE& ...
-
Tyco 1928L - page 44
AccuTouch (resistive) Touchscreen Specifications Mechanical Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density More than 100,000 touchpoints/in 2 (15,500 touchpoints/cm 2 ) Touch Activation Force Typical less than 3 ounces(85 grams) Surface Durability Surface durability is ...
-
Tyco 1928L - page 45
IntelliTouch(acoustic) Touchmonitor Specifications Mechanical Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density More than 100,000 touchpoints/in 2 (15,500 touchpoints/cm 2 ). Touch Activation Typically less than 3 ounces (85 grams). Force Surface Durability Surface durabi ...
-
Tyco 1928L - page 46
C-32 Elo Touchmonitor User Guide ...
-
Tyco 1928L - page 47
A P P E N D I X D Contact Elo Elo TouchSystems 301 Constitution Drive Menlo Park, CA 94025 1-800-ELO-TOUCH (1-800-356-8682) www.elotouch.com D-33 ...
-
Tyco 1928L - page 48
D-34 Elo Touchmonitor User Guide ...
-
Tyco 1928L - page 49
R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if t ...
-
Tyco 1928L - page 50
D) General Information to all Users: This equipment generates, uses and can radiate radio fre- quency energy. If not installed and used according to this manual the equipment may cause interference with radio and television communications. There is, however, no guarantee that interference will not occur in any particular installation due to site-sp ...
-
Tyco 1928L - page 51
W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product is 3 years. Seller makes no warranty regarding the model life of components. Seller’s suppli ...
-
Tyco 1928L - page 52
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER GRANTS NO OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, THEIR NONINFRINGEMENT, OR OTHERWISE. NO EMPLOYEE ...
-
Tyco 1928L - page 53
Numerics ET1928L-XXWA-1-G A About touchmonitor Adjustments, 11 AccuTouch(resistive)Touchscreen Specifications, 30 Audio Volume, 16 Auto-Adjust, 16 B Back Unit, 4 Base Bottom View, 5 Brightness, 16 C Care and Handling of your Touchmonitor, 24 Caution-Life Support, vi Classification, vii Clock, 16 Color Balance, 16 Connecting the Video Cable, 6 Conne ...
-
Tyco 1928L - page 54
I N D E X -40 R Rear View, 10 Rear Mounting Using the VESA Interface, 11 Recall Defaults, 16 Regulatory Information, 36 S Sealing, 30, 31 Sharpness, 16 Side Panel Controls, 12 Side View, 4 Solutions to Common Problems, 19 European Standards and Classifications, vii Standards, vii Surface Durability, 30, 31 SVGA, 21 T Technical Specifications, 25 To ...
-
Tyco 1928L - page 55
© 2007 Tyco Electronics. Printed in USA Check out Elo TouchSystems Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers Getting in T ouch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.elotouc ...
Do you have a question concerning Tyco 1928L?
Use the form below
If you did not solve your problem by using a manual Tyco 1928L, ask a question using the form below. If a user had a similar problem with Tyco 1928L it is likely that he will want to share the way to solve it.