English dropdown-ico

Manual Supermicro SuperServer 6028R-TRT

126 pages Not applicable
Download

Go to site of 126

Summary
  • Supermicro SuperServer 6028R-TRT - page 1

    ® S UPER S ER VER ® 6028R-TR 6028R-TR T S UPER USER’S MANUAL 1.0 ...

  • Supermicro SuperServer 6028R-TRT - page 2

    The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: F ...

  • Supermicro SuperServer 6028R-TRT - page 3

    iii Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6028R-TR/TRT . Installation and maintainance should be performed by experienced technicians only . The SuperServer 6028R-TR/TRT is a high-end server based on the ...

  • Supermicro SuperServer 6028R-TRT - page 4

    S UPER S ERVER 6028R-TR/TRT User's Manual iv Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X10DRi-/X10DRi-T serverboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when reconguring the serverboar ...

  • Supermicro SuperServer 6028R-TRT - page 5

    Notes Preface v ...

  • Supermicro SuperServer 6028R-TRT - page 6

    vi T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features ..................................................................................... 1-2 Processors ........................................................ ...

  • Supermicro SuperServer 6028R-TRT - page 7

    vii NIC2 ................................................................................................................ 3-3 HDD ................................................................................................................. 3-3 Power ................................................................................................ ...

  • Supermicro SuperServer 6028R-TRT - page 8

    viii S UPER S ERVER 6028R-TR/TRT User's Manual 5-8 Connector Denitions ................................................................................... 5-14 5-9 Jumper Settings ............................................................................................ 5-20 5-10 Onboard Indicators ........................................ ...

  • Supermicro SuperServer 6028R-TRT - page 9

    Chapter 1 Introduction 1-1 Overview The SuperServer 6028R-TR/TRT is a high-end server comprised of two main subsystems: the SC825TQ-R740LPB 2U chassis and the X10DRi-/X10DRi-T dual processor serverboard. Please refer to our web site for information on operating systems that have been certied for use with the system (www .supermicro.com). In addi ...

  • Supermicro SuperServer 6028R-TRT - page 10

    1-2 S UPER S ERVER 6028R-TR/TRT User's Manual 1-2 Serverboard Features The SuperServer 6028R-TR/TRT is built around the X10DRi-/X10DRi-T , a dual pro - cessor serverboard based on the Intel® PCH C612 chipset and designed to provide maximum performance. Below are the main features of the X10DRi-/X10DRi-T . (See Figure 1-1 for a block diagram o ...

  • Supermicro SuperServer 6028R-TRT - page 11

    1-3 Chapter 1: Introduction Graphics Controller The X10DRi-/X10DRi-T features an integrated Aspeed 2400 controller . 1-3 Server Chassis Features The SC825TQ-R740LPB is an A TX form factor chassis designed to be used in a 2U rackmount conguration. The following is a general outline of the main features of the SC825TQ-R740LPB server chassis. Syste ...

  • Supermicro SuperServer 6028R-TRT - page 12

    1-4 S UPER S ERVER 6028R-TR/TRT User's Manual Figure 1-1. Chipset System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. SP I L AN 3 RGRMII Debug Card FRONT PANEL SYSTEM POWER CTRL FAN SPEED PCI-E X1 G2 USB 2.0 #12 USB2. 0 #6/7/ 8 PC H 6.0 Gb/S USB 2.0 LP C #1 #0 SAT A #5 #4 R TL 8211 E-VB-CG #3 #2 R J4 5 ...

  • Supermicro SuperServer 6028R-TRT - page 13

    1-5 Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address: Super Micro Com ...

  • Supermicro SuperServer 6028R-TRT - page 14

    1-6 S UPER S ERVER 6028R-TR/TRT User's Manual Notes ...

  • Supermicro SuperServer 6028R-TRT - page 15

    Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 6028R-TR/ TRT up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your system has com ...

  • Supermicro SuperServer 6028R-TRT - page 16

    2-2 S UPER S ERVER 6028R-TR/TRT User's Manual • This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). • This product is not suitable for use with visual display work place devices acccording to §2 of the the German Ordinance for Work with V isual Display Unit ...

  • Supermicro SuperServer 6028R-TRT - page 17

    Chapter 2: Server Installation 2-3 Rack Mounting Considerations Ambient Operating T emperature If installed in a closed or multi-unit rack assembly , the ambient operating tempera - ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environ ...

  • Supermicro SuperServer 6028R-TRT - page 18

    2-4 S UPER S ERVER 6028R-TR/TRT User's Manual 2-4 Installing the System into a Rack This section provides information on installing the SC825 chassis into a rack unit with the quick-release rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly . Y ou should also refer to the ...

  • Supermicro SuperServer 6028R-TRT - page 19

    Chapter 2: Server Installation 2-5 Figure 2-1: Separating the Rack Rails screw the handles the outer rails for secure purpose if necessary F. ABLECOM DA TE:2008/08/14 REV:2 SCREW SCREW COMPLETE 1 2 1 1 1 2 1 4 1 3 Separating the Inner and Outer Rails 1. Locate the rail assembly in the chassis packaging. 2. Extend the rail assembly by pulling it out ...

  • Supermicro SuperServer 6028R-TRT - page 20

    2-6 S UPER S ERVER 6028R-TR/TRT User's Manual Outer Rack Rails Outer rails attach to the rack and hold the chassis in place. The outer rails for the SC825 chassis extend between 30 inches and 33 inches. Installing the Outer Rails to the Rack 1. Secure the back end of the outer rail to the rack, using the screws provided. 2. Press the button wh ...

  • Supermicro SuperServer 6028R-TRT - page 21

    Chapter 2: Server Installation 2-7 screw the handles the outer rails for secure purpose if necessary F. ABLECOM DA TE:2008/08/14 REV:2 SCREW SCREW COMPLETE 1 2 Figure 2-3. Installing the Rack Rails Installing the Chassis into a Rack 1. Extend the outer rails as illustrated above. 2. Align the inner rails of the chassis with the outer rails on the r ...

  • Supermicro SuperServer 6028R-TRT - page 22

    2-8 S UPER S ERVER 6028R-TR/TRT User's Manual Notes ...

  • Supermicro SuperServer 6028R-TRT - page 23

    Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel as well as others on the drive carriers to keep you constantly informed of the overall status of the system and the activ - ity and health of specic components. There are also two buttons on the chassis control panel. 3-2 Control P ...

  • Supermicro SuperServer 6028R-TRT - page 24

    SUPERSERVER 6028R-TR/TR T User's Manual 3-2 Note: deactivating the UID LED must be performed in the same way it was activated. (If the UID LED was activated via IPMI, you can only turn the LED off via IPMI and not with the UID button.) Information LED States State Indication Continuously On (Red) An overheat condition has occured. Fast Blinkin ...

  • Supermicro SuperServer 6028R-TRT - page 25

    Chapter 3: System Interface 3-3 1 2 NIC1 Indicates network activity on the LAN1 port when ashing. NIC2 Indicates network activity on the LAN2 port when ashing. HDD This LED indicates hard drive and/or DVD-ROM drive activity when ashing. Power Indicates power is being supplied to the system's power supply units. This LED should normall ...

  • Supermicro SuperServer 6028R-TRT - page 26

    SUPERSERVER 6028R-TR/TR T User's Manual 3-4 Notes ...

  • Supermicro SuperServer 6028R-TRT - page 27

    4-1 Chapter 4: W arning Statements for AC Systems Chapter 4 Standardized W arning Statements for AC Systems 4-1 About Standardized W arning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury . Should you have questions or experience difficulty , cont ...

  • Supermicro SuperServer 6028R-TRT - page 28

    4-2 S UPER S ERVER 6028R-TR/TRT User's Manual W arnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr . Sie benden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen V erfahren zur V orbeugung vor Unfällen vertra ...

  • Supermicro SuperServer 6028R-TRT - page 29

    4-3 W arning Statements for AC Systems 안전을 위한 주의사항 경고! 이 경고 기호는 위험이 있음을 알려 줍니다. 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다. 모든 장비에 대한 작업을 수행하기 전에 전기회로와 관련된 위험요소들을 확인하시고 사전에 사고 ...

  • Supermicro SuperServer 6028R-TRT - page 30

    4-4 S UPER S ERVER 6028R-TR/TRT User's Manual Installation Instructions W arning! Read the installation instructions before connecting the system to the power source. W arnung V or dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistem ...

  • Supermicro SuperServer 6028R-TRT - page 31

    4-5 Chapter 4: W arning Statements for AC Systems Circuit Breaker W arning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V , 20 A. サー キ ッ ト ・ ブレ ーカー こ の 製品は 、 短絡 （過電流 ） 保護装置? ...

  • Supermicro SuperServer 6028R-TRT - page 32

    4-6 S UPER S ERVER 6028R-TR/TRT User's Manual Power Disconnection W arning 電源切断の警告 システムコン ポ ー ネ ン トの 取り付 けまた は 取り外しの た め に 、 シャーシ ー 内 部 にア クセ ス する に は 、 シ ステムの 電 源 は すべ てのソ ースから 切 断され 、 電 源 コ ...

  • Supermicro SuperServer 6028R-TRT - page 33

    4-7 Chapter 4: W arning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema. Attention Le système doit être débranché de ...

  • Supermicro SuperServer 6028R-TRT - page 34

    4-8 S UPER S ERVER 6028R-TR/TRT User's Manual Equipment Installation 機器の設置 ト レ ー ニ ン グを受け認 定さ れた人だけが こ の 装 置の 設 置、 交 換、 ま たはサー ビ スを許可 されています 。 W arning! Only trained and qualied personnel should be allowed to install, replace, or service th ...

  • Supermicro SuperServer 6028R-TRT - page 35

    4-9 Chapter 4: W arning Statements for AC Systems ア ク セ ス制限区域 こ の ユニ ッ ト は 、 ア ク セ ス制限区域 に 設置 さ れ る こ と を 想定 し て い ま す 。 ア ク セ ス制限区域 は 、 特別な ツ ール 、 鍵 と 錠前、 そ の他の セキ ュ リ テ ィ の手段を 用い て の み ...

  • Supermicro SuperServer 6028R-TRT - page 36

    4-10 S UPER S ERVER 6028R-TR/TRT User's Manual Battery Handling W arning! There is the danger of explosion if the battery is replaced incorrectly . Replace the battery only with the same or equivalent type recommended by the manufacturer . Dispose of used batteries according to the manufacturer's instructions תלבגומ השיג םע ר ...

  • Supermicro SuperServer 6028R-TRT - page 37

    4-1 1 Chapter 4: W arning Statements for AC Systems W arnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr . Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'es ...

  • Supermicro SuperServer 6028R-TRT - page 38

    4-12 S UPER S ERVER 6028R-TR/TRT User's Manual W arnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle V erbindungen entfernt werden. ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por completo el sumin ...

  • Supermicro SuperServer 6028R-TRT - page 39

    4-13 Chapter 4: W arning Statements for AC Systems Backplane V oltage バッ ク プレ ーン の 電 圧 シ ス テ ムの稼 働中 は危険な電 圧 ま たは電力 が、 バ ッ ク プ レ ー ン上に かか っ てい ま す 。 修 理 する 際 に は 注 意く ださい 。 警告 当系统正在进行时，背板上有很危? ...

  • Supermicro SuperServer 6028R-TRT - page 40

    4-14 S UPER S ERVER 6028R-TR/TRT User's Manual Comply with Local and National Electrical Codes W arning! Installation of the equipment must comply with local and national electrical codes. 地方お よ び国の電気規格 に 準拠 機器の取 り 付け はそ の地方お よ び国の電気規 格に 準拠す る 必要があ り ま ...

  • Supermicro SuperServer 6028R-TRT - page 41

    4-15 Chapter 4: W arning Statements for AC Systems Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations. יצראה למשחה יקוח םואית !הרהזא תנקתה םייצראהו םיימוקמה למשחה יקוחל תמאות תויהל תביי ח דויצה . ? ...

  • Supermicro SuperServer 6028R-TRT - page 42

    4-16 S UPER S ERVER 6028R-TR/TRT User's Manual W aarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Attention La mise au rebut ou le recyclage d ...

  • Supermicro SuperServer 6028R-TRT - page 43

    4-17 Chapter 4: W arning Statements for AC Systems W arnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger , Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Los ventiladores podran dar vuelta cuando usted quite ell montaje del ve ...

  • Supermicro SuperServer 6028R-TRT - page 44

    4-18 S UPER S ERVER 6028R-TR/TRT User's Manual W arning! When installing the product, use the provided or designated connection cables, power cables and AC adaptors. Using any other cables and adaptors could cause a malfunction or a re. Electrical Appliance and Material Safety Law prohibits the use of UL or CSA -certied cables (that have ...

  • Supermicro SuperServer 6028R-TRT - page 45

    4-19 Chapter 4: W arning Statements for AC Systems Attention Lors de l'installation du produit, utilisez les bables de connection fournis ou désigné. L'utilisation d'autres cables et adaptateurs peut provoquer un dysfonctionnement ou un incendie. Appareils électroménagers et de loi sur la sécurité Matériel interdit l'util ...

  • Supermicro SuperServer 6028R-TRT - page 46

    4-20 S UPER S ERVER 6028R-TR/TRT User's Manual Notes ...

  • Supermicro SuperServer 6028R-TRT - page 47

    Chapter 5: Advanced Serverboard Setup 5-1 Chapter 5 Advanced Serverboard Setup This chapter covers the steps required to connect the data and power cables and install add-on cards. All serverboard jumpers and connections are also described. A layout and quick reference chart are included in this chapter for your reference. Remember to completely cl ...

  • Supermicro SuperServer 6028R-TRT - page 48

    5-2 S UPER S ERVER 6028R-TR/TRT User's Manual Unpacking The serverboard is shipped in antistatic packaging to avoid electrical static dis - charge. When unpacking the board, make sure the person handling it is static protected. 5-2 Connecting Cables The cables listed below should already be connected to the serverboard. These include the data ...

  • Supermicro SuperServer 6028R-TRT - page 49

    Chapter 5: Advanced Serverboard Setup 5-3 5-3 I/O Ports See Figure 5-2 below for the descriptions of the various rear I/O ports. Figure 5-1. Control Panel Header Pins Figure 5-2. I/O Ports I/O Ports 1 COM1 Port 6 USB Port 13 (USB 3.0) 2 USB Port 0 (USB 2.0) 7 LAN Port 1* 3 USB Port 1 (USB 2.0) 8 LAN Port 2* 4 IPMI LAN Port 9 VGA Port 5 USB Port 12 ...

  • Supermicro SuperServer 6028R-TRT - page 50

    5-4 S UPER S ERVER 6028R-TR/TRT User's Manual 1. There are two levers on the LGA201 1 socket. First press and release the load lever labeled 'Open 1st'. 2. Press the second load lever labeled 'Close 1st' to release the load plate from its locked position. Installing an LGA201 1 Processor 5-4 Installing the Processor and Hea ...

  • Supermicro SuperServer 6028R-TRT - page 51

    Chapter 5: Advanced Serverboard Setup 5-5 Gently push down to pop the load plate open. 3. Wit h th e lever la be led ' Cl os e 1 st ' ful ly ret rac te d, gent ly pu sh do wn on th e 'O pe n 1st' l ever to op en t he loa d plate. L if t t he l oad p late to open it completely . 4. Usin g your t hum b and t he in dex ng er, r ...

  • Supermicro SuperServer 6028R-TRT - page 52

    5-6 S UPER S ERVER 6028R-TR/TRT User's Manual W arning: Y ou can only install the CPU to the socket in one direction. Make sure that the CPU is properly inserted into the socket before closing the load plate. If it doesn't close properly , do not force it as it may damage your CPU. Instead, open the load plate again and double-check that ...

  • Supermicro SuperServer 6028R-TRT - page 53

    Chapter 5: Advanced Serverboard Setup 5-7 1. Unplug the power cord from the power supply . 1. Unscrew and remove the heatsink screws in the sequence shown in the picture below . 2. Hold the heatsink and gently wiggle it to loosen it from the CPU. (Do not use excessive force when doing this!) 3. Once the heatsink is loosened, remove it from the CPU. ...

  • Supermicro SuperServer 6028R-TRT - page 54

    5-8 S UPER S ERVER 6028R-TR/TRT User's Manual Memory Support The X10DRi/X10DRi-T supports up to 1 TB of DDR4-2133/1866/1600/1333 RDIMM ECC memory (or 2 TB of LRDIMMs). Use memory modules of the same type and speed. See the following tables for memory installation. Please refer to the Supermicro web site for possible updates to supported memory ...

  • Supermicro SuperServer 6028R-TRT - page 55

    Chapter 5: Advanced Serverboard Setup 5-9 Processor & Memory Module Population Conguration For memor y to work properly , follow the tables below for memor y instal lation. Processors and their Corresponding Memory Modules CPU# Corresponding DIMM Modules CPU 1 P1- DIMMA1 P1- DIMMB1 P1- DIMMC1 P1- DIMMD1 P1- DIMMA2 P1- DIMMB2 P1- DIMMC2 P1- D ...

  • Supermicro SuperServer 6028R-TRT - page 56

    5-10 S UPER S ERVER 6028R-TR/TRT User's Manual 5-6 Adding PCI Add-On Cards The 6028R-TR/TRT can accommodate six low-prole PCI add-on cards. Installing an Add-on Card 1. Begin by removing the shield for the PCI slot you wish to populate. 2. Fully seat the card into the slot, pushing down with your thumbs evenly on both sides of the card. 3. ...

  • Supermicro SuperServer 6028R-TRT - page 57

    Chapter 5: Advanced Serverboard Setup 5-1 1 Figure 5-4. X10DRi/X10DRi-T Layout (not drawn to scale) 5-7 Serverboard Details JPI2C1 JPWR1 JPWR2 JOH1 JL1 JSD1 JSD2 JSTBY1 JT PM 1 JPB1 JWD1 J29 JI2C2 JPME2 J30 JI2C1 USB3/4 (3.0) SP1 JI PM B1 LE2 FA N4 FA N2 FA N3 F AN1 F ANB S-SA TA 2 MAC CO DE BAR CO DE S-S AT A3 S-SA TA 0 S-SA TA 1 Fa n5 T -SGPIO3 U ...

  • Supermicro SuperServer 6028R-TRT - page 58

    5-12 S UPER S ERVER 6028R-TR/TRT User's Manual X10DRi/X10DRi-T Quick Reference Jumper Description Default Setting JBR1 BIOS Recovery Enable/Disable Pins 1-2 (Normal) JBT1 Clear CMOS See Section 5-9 JI 2 C1/JI 2 C2 SMB to PCI-E Slots Enable/Disable Off (Disabled) JPB1 BMC Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabl ...

  • Supermicro SuperServer 6028R-TRT - page 59

    Chapter 5: Advanced Serverboard Setup 5-13 (CPU2) Slot5 PCI-Express 3.0 x8 Slot from CPU2 (CPU2) Slot6 PCI-Express 3.0 x16 Slot from CPU2 (T -)SGPIO1/2/3 Serial Link General Purpose I/O Headers SP1 Internal Speaker/Buzzer (BP) USB 0/1 Backpanel USB 2.0 Ports 0/1 (BP) USB 12/13 Backpanel USB 2.0 Ports 12/13, or USB 3.0 Ports 0/1 (FP) USB 2/3, 4/5 Fr ...

  • Supermicro SuperServer 6028R-TRT - page 60

    5-14 S UPER S ERVER 6028R-TR/TRT User's Manual Reset Button The Reset Button connection is located on pins 3 and 4 of JF1 and attaches to the reset switch on the computer chassis. See the table on the right for pin denitions. Power Button The Power On connection is on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off t ...

  • Supermicro SuperServer 6028R-TRT - page 61

    Chapter 5: Advanced Serverboard Setup 5-15 HDD LED The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to Pin 14 to show HDD activity status. Attach a cable to Pin 13 to use UID switch. See the table on the right for pin denitions. NIC2 LED Pin Denitions (JF1) Pin# Denition 9 Vcc 10 Ground NIC2 (LAN2) LED The LED con ...

  • Supermicro SuperServer 6028R-TRT - page 62

    5-16 S UPER S ERVER 6028R-TR/TRT User's Manual Fan Headers There are eight fan headers on the serverboard (Fan 1-Fan 6, Fan A, Fan B), all of which are 4 - p in fa ns. Pi ns 1-3 of t he fa n hea der s ar e bac k war d compatible wit h the traditional 3 - pin fans. (F an speed control is su ppor ted wit h 4 - pi n fan s onl y . ) S ee t he t ab ...

  • Supermicro SuperServer 6028R-TRT - page 63

    Chapter 5: Advanced Serverboard Setup 5-17 Internal Speaker The Internal Speaker , located at SP1, can be used to provide audible indica - tions for various beep codes. See the table on the right for pin denitions. Internal Buzzer (SP1) Pin Denition Pin# Denitions Pin 1 Pos. (+) Beep In Pin 2 Neg. (-) Alarm Speaker Overheat/Fan Fail LED Th ...

  • Supermicro SuperServer 6028R-TRT - page 64

    5-18 S UPER S ERVER 6028R-TR/TRT User's Manual Standby Power The Standby Power header is located at JSTBY1 on the serverboard. See the table on the right for pin deni - tions. (Y ou must also have a cable to use this feature.) Standby Power Pin Denitions Pin# Denition 1 +5V Standby 2 Ground 3 Wake-up Power SMB (I 2 C) Connector Power ...

  • Supermicro SuperServer 6028R-TRT - page 65

    Chapter 5: Advanced Serverboard Setup 5-19 Universal Serial Bus (USB) T wo USB 2.0 ports (USB 0/1) and two USB 2.0/3.0 ports (USB12/13) are lo - cated on the I/O backpanel. (Note that USB ports 12/13 support both USB 2.0 and 3.0.) In addition, two internal USB headers provides a total of four USB 2.0 connections (USB 2/3, 4/5) for front panel suppo ...

  • Supermicro SuperServer 6028R-TRT - page 66

    5-20 S UPER S ERVER 6028R-TR/TRT User's Manual 5-9 Jumper Settings Explanation of Jumpers T o modify the operation of the serverboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the con - nector . Pin 1 is identied with a square solder pad on the printed circuit ...

  • Supermicro SuperServer 6028R-TRT - page 67

    Chapter 5: Advanced Serverboard Setup 5-21 CMOS Clear JBT1 is used to clear CMOS (which will also clear any passwords). Instead of pins, this jumper consists of contact pads to prevent accidentally clearing the contents of CMOS. T o clear CMOS, 1. First power down the system and unplug the power cord(s). 2. With the power disconnected, short the CM ...

  • Supermicro SuperServer 6028R-TRT - page 68

    5-22 S UPER S ERVER 6028R-TR/TRT User's Manual I 2 C to PCI-E Slots Jumper Settings Jumper Setting Denition Pins 1-2 Enabled Pins 2-3 Disabled I 2 C Bus to PCI-Exp. Slots Jumpers JI 2 C1 and JI 2 C2 allow you to connect the System Management Bus (I 2 C) to the PCI-Express slots. The default setting is disabled. Both jump - ers must be set t ...

  • Supermicro SuperServer 6028R-TRT - page 69

    Chapter 5: Advanced Serverboard Setup 5-23 5-10 Onboard Indicators LAN LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each port, one LED ashes to indicate activ - ity while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the co ...

  • Supermicro SuperServer 6028R-TRT - page 70

    5-24 S UPER S ERVER 6028R-TR/TRT User's Manual 5-1 1 SA T A Ports SA T A Port Pin Denitions Pin# Denition Pin Denition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground SA T A 3.0 Ports The re ar e ten Se r ial A T A Po r t s, wh ic h inc lud e six S A T A sup por ted by t he PCH C 612 (I- SA T A 0 ~ 5) an d fou r SA TA suppor td by ...

  • Supermicro SuperServer 6028R-TRT - page 71

    Chapter 5: Advanced Serverboard Setup 5-25 5-12 Installing Software The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp. supermicro.com . Some of these must be installed, such as the chipset driver . After accessing the ftp site, go into the CDR_Images directory and locate the ISO le for your motherboard. Download ...

  • Supermicro SuperServer 6028R-TRT - page 72

    5-26 S UPER S ERVER 6028R-TR/TRT User's Manual SuperDoctor® 5 The Supermicro SuperDoctor 5 is a program that functions in a command-line or web-based interface in Windows and Linux operating systems. The program moni - tors system health information such as CPU temperature, system voltages, system power consumption, fan speed, and provides al ...

  • Supermicro SuperServer 6028R-TRT - page 73

    Chapter 5: Advanced Serverboard Setup 5-27 Figure 5-7. Installing the Onboard Battery OR Please handle used batteries carefully . Do not damage the battery in any way; a damaged battery may release hazardous materials into the environment. Do not discard a used battery in the garbage or a public landll. Please comply with the regulations set up ...

  • Supermicro SuperServer 6028R-TRT - page 74

    5-28 S UPER S ERVER 6028R-TR/TRT User's Manual Notes ...

  • Supermicro SuperServer 6028R-TRT - page 75

    Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform mainte - nance on the SC825TQ-R740LPB chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnecessary , skip ahead t ...

  • Supermicro SuperServer 6028R-TRT - page 76

    6-2 S UPER S ERVER 6028R-TR/TRT User's Manual Figure 6-1. Front and Rear Chassis Views System Reset 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system status indications. A ribbon cable has bundled these wires together to simplify the co ...

  • Supermicro SuperServer 6028R-TRT - page 77

    Chapter 6: Advanced Chassis Setup 6-3 6-3 System Fans Three 8-cm hot-swap fans provide the cooling for the system. It is very important that the chassis top cover is properly installed and making a good seal in order for the cooling air to circulate properly through the chassis and cool the components. See Figure 6-2. System Fan Failure Fan speed i ...

  • Supermicro SuperServer 6028R-TRT - page 78

    6-4 S UPER S ERVER 6028R-TR/TRT User's Manual Figure 6-2. Removing System Cooling Fans 6-4 Drive Bay Installation/Removal Accessing the Drive Bays Y ou do not need to access the inside of the chassis or remove power to replace or swap SA T A drives. Proceed to the next step for instructions. Y ou must use standard 1" high, SA T A drives i ...

  • Supermicro SuperServer 6028R-TRT - page 79

    Chapter 6: Advanced Chassis Setup 6-5 SA T A Drive Installation These drives are mounted in carriers to simplify their installation and removal from the chassis. The carriers also help promote proper airow for the drives. For this reason, even empty carriers without hard drives installed must remain in the chassis. Removing a Drive Carrier 1. Pu ...

  • Supermicro SuperServer 6028R-TRT - page 80

    6-6 S UPER S ERVER 6028R-TR/TRT User's Manual Hard Drive Backplane The hard drives plug into a backplane that provides power , drive ID and bus termi - nation. A RAID controller can be used with the backplane to provide data security . The operating system you use must have RAID support to enable the hot-swap capability of the hard drives. The ...

  • Supermicro SuperServer 6028R-TRT - page 81

    Chapter 6: Advanced Chassis Setup 6-7 6-5 Power Supply The SuperServer 6028R-TR/TRT has a 740 watt redundant power supply consisting of two power modules. Each power supply module has an auto-switching capability , which enables it to automatically sense and operate at a 100V - 240V input voltage. Power Supply Failure If either of the two power sup ...

  • Supermicro SuperServer 6028R-TRT - page 82

    6-8 S UPER S ERVER 6028R-TR/TRT User's Manual Notes ...

  • Supermicro SuperServer 6028R-TRT - page 83

    Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introducti on This chapter describes the AMI BIOS setup utility for the X10DRi/X10DRi-T . The ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS setup utility screens. Note: For AMI BIOS recovery , please refer to the UEFI BIOS Recovery I ...

  • Supermicro SuperServer 6028R-TRT - page 84

    7-2 S UPER S ERVER 6028R-TR/TRT User's Manual How to Start the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS setup utility . From the main menu, you can access the other setup screens. An AMI BIO ...

  • Supermicro SuperServer 6028R-TRT - page 85

    Chapter 7: BIOS 7-3 The following Main menu items will be displayed: System Date/System Time Use this option to change the system date and time. Highlight System Date or System Time using the arrow keys. Enter new values using the keyboard. Press the <T ab> key or the arrow keys to move between elds. The date must be entered in Day MM/DD/Y ...

  • Supermicro SuperServer 6028R-TRT - page 86

    7-4 S UPER S ERVER 6028R-TR/TRT User's Manual 7-3 Advanced Setup Congurations Use the arrow keys to select Advanced setup and press <Enter> to access the submenu items: W arning : T ake Caution when changing the Advanced settings. An incorrect value, a very high DRAM frequency or an incorrect BIOS timing setting may cause the system t ...

  • Supermicro SuperServer 6028R-TRT - page 87

    Chapter 7: BIOS 7-5 W ait For 'F1' If Error Select Enabled to force the sys tem to wa it unt il th e ' F 1' key is pres se d if an e rr or oc cu rs. T he o pti ons a re D isa ble d and Enabled . Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Immediate, th ...

  • Supermicro SuperServer 6028R-TRT - page 88

    7-6 S UPER S ERVER 6028R-TR/TRT User's Manual  CPU Conguration  North Bridge This feature allows the user to congure the settings for the Intel North Bridge.  IIO Conguration EV DFX (Device Function On-Hide) Features When this feature is set to Enable, the EV_DFX Lock Bits that are located on a processor will always remain cl ...

  • Supermicro SuperServer 6028R-TRT - page 89

    Chapter 7: BIOS 7-7 The following items will be display: PCI-E Port Link Status PCI-E Port Link Max PCI-E Port Link Speed PCI-E Port L0s Exit Latency Use this feature to set the length of time required for the port specied by the user to complete the transition from L0s to L0. The default setting is 4uS - 8uS . PCI-E Port L1 Exit Latency Use thi ...

  • Supermicro SuperServer 6028R-TRT - page 90

    7-8 S UPER S ERVER 6028R-TR/TRT User's Manual No PCIe Port Active ECO Use this feature to select a workaround setting to implement the engineering- change order (ECO) on the system when PCI ports are not active. The options are PCU Squelch exit ignore option and Reset the SQ FLOP by CSR option.  IOA T Conguration Enable I/OA T Select Ena ...

  • Supermicro SuperServer 6028R-TRT - page 91

    Chapter 7: BIOS 7-9 Coherency Support (Isoch) Select Enable for the Iscoh VT -d engine to pass through A TS to enhance system performance. The options are Enable and Disable .  QPI (Quick Path Interconnect) Conguration The following QPI information will be displayed: • Number of CPU • Number of II0 • Current QPI Link Speed: Thi ...

  • Supermicro SuperServer 6028R-TRT - page 92

    7-10 S UPER S ERVER 6028R-TR/TRT User's Manual  Memory Conguration Enforce POR Select Enable to enforce POR restrictions on DDR4 frequency and voltage pro - gramming. The options are Auto , Enforce POR, Disabled and Enforce Stretch Goals. Memory Frequency Use this feature to set the maximum memory frequency for onboard memory modules. Th ...

  • Supermicro SuperServer 6028R-TRT - page 93

    Chapter 7: BIOS 7-1 1 Rank Interleaving Use this item to select a rank memory interleaving method. The options are Auto , 1-W ay , 2-W ay , 4-W ay , and 8-Way . A7 Mode Select Enabled to support the A7 (Addressing) mode to improve memory per - formance. The options are Enable and Disable.  DIMM Information This item displays the status of a DIMM ...

  • Supermicro SuperServer 6028R-TRT - page 94

    7-12 S UPER S ERVER 6028R-TR/TRT User's Manual write back one cache line every 16K cycles, if there is no delay caused by internal processing. By using this method, roughly 64 GB of memory behind the IO hub will be scrubbed every day . The options are Enable and Disable. Patrol Scrub Interval This feature allows you to decide how many hours th ...

  • Supermicro SuperServer 6028R-TRT - page 95

    Chapter 7: BIOS 7-13 XHCI Hand-Off This is a work-around solution for operating systems that do not support XHCI (Ex - tensible Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the XHCI driver . The settings are Enabled and Disabled. EHCI Hand-Off This item is for operating systems that do not support Enhanced Hos ...

  • Supermicro SuperServer 6028R-TRT - page 96

    7-14 S UPER S ERVER 6028R-TR/TRT User's Manual  SA T A Conguration When this submenu is selected, AMI BIOS automatically detects the presence of the SA T A devices that are supported by the Intel PCH chip and displays the fol - lowing items: SA T A Controller This item enables or disables the onboard SA T A controller supported by the In ...

  • Supermicro SuperServer 6028R-TRT - page 97

    Chapter 7: BIOS 7-15 Port 0 ~ Port 5 SA T A Device T ype Use this item to specify if the SA T A port specied by the user should be con - nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive. *If the item above "Congure SA T A as" is set to IDE, the following items will display: Se ...

  • Supermicro SuperServer 6028R-TRT - page 98

    7-16 S UPER S ERVER 6028R-TR/TRT User's Manual Port 0 ~ Port 5 Hot Plug Select Enabled to enable hot-plugging support for a port specied by the user , which will allow the user to replace a SA T A disk drive installed on this port without shutting down the system. The options are Enabled and Disabled . Port 0 ~ Port 5 Spin Up Device On an e ...

  • Supermicro SuperServer 6028R-TRT - page 99

    Chapter 7: BIOS 7-17 • Software Preserve Support sSA T A Port 0~ Port 3 Select Enabled to enable an sSA T A port specied by the user . The options are Disabled and Enabled. sSA T A Port 0 ~ Port 3 Hot Plug Select Enabled to enable hot-plugging support for a port specied by the user , which will allow the user to replace a sSA T A disk dr ...

  • Supermicro SuperServer 6028R-TRT - page 100

    7-18 S UPER S ERVER 6028R-TR/TRT User's Manual sSA T A RAID Option ROM/UEFI Driver Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for system boot. The options are Disabled, EFI, and Legacy . sSA T A Port 0~ Port 3 This item displays the information detected on the installed sSA T A drives on the partic ...

  • Supermicro SuperServer 6028R-TRT - page 101

    Chapter 7: BIOS 7-19 • ME Firmware Status #2 • Current State • Error Code Altitude This feature indicates the altitude of the platform this machine is located above the sea level. The value is shown in meters. If the value is unknown, enter the number "80000000". MCTP (Management Component T ransport Protocol) Bus Owner Thi ...

  • Supermicro SuperServer 6028R-TRT - page 102

    7-20 S UPER S ERVER 6028R-TR/TRT User's Manual Above 4G Decoding (A vailable if the system supports 64-bit PCI decoding) Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address. The options are Enabled and Disabled. SR-IOV (A vailable if the system supports Single-Root V irtualization) Select Enabled for Single ...

  • Supermicro SuperServer 6028R-TRT - page 103

    Chapter 7: BIOS 7-21 Onboard LAN Option ROM T ype Sel ec t Enab led t o ena ble O pti on RO M su ppo r t to boot the computer using a device installed on the slot specied by the user . The options are Leg acy and EFI. Onboard LAN1 Option ROM/Onboard LAN2 Option ROM Use t his o pti on to s ele ct t he t y pe of d evic e ins ta lle d in L A N Po r ...

  • Supermicro SuperServer 6028R-TRT - page 104

    7-22 S UPER S ERVER 6028R-TR/TRT User's Manual Device Mode Use this feature to congure SUART clock source settings. The options are 24MHz/13 and 24MHz. Serial Port 2 Attribute Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redi - rection. The options are COM and SOL .  Serial Port Console Redirection COM 1 Conso ...

  • Supermicro SuperServer 6028R-TRT - page 105

    Chapter 7: BIOS 7-23 is odd. Select None if you do not want to send a parity bit with your data bits in transmission. Select Mark to add a mark as a parity bit to be sent along with the data bits. Select Space to add a Space as a parity bit to be sent with your data bits. The options are None , Even, Odd, Mark and Space. Stop Bits A stop bit indica ...

  • Supermicro SuperServer 6028R-TRT - page 106

    7-24 S UPER S ERVER 6028R-TR/TRT User's Manual SOL/COM2 Console Redirection Select Enabled to use the SOL port for Console Redirection. The options are Enabled and Disabled. *If the item above set to Enabled, the following items will become available for user's conguration:  SOL/COM2 Console Redirection Settings Use this feature to ...

  • Supermicro SuperServer 6028R-TRT - page 107

    Chapter 7: BIOS 7-25 Flow Control Use this feature to set the ow control for Console Redirection to prevent data loss caused by buffer overow . Send a "Stop" signal to stop sending data when the receiving buffer is full. Send a "Start" signal to start data-sending when the receiving buffer is empty . The options are None a ...

  • Supermicro SuperServer 6028R-TRT - page 108

    7-26 S UPER S ERVER 6028R-TR/TRT User's Manual *If the item above set to Enabled, the following items will become available for user's conguration: Out-of-Band Management Port The feature selects a serial port in a client server to be used by the Windows Emergency Management Services (EMS) to communicate with a remote host server . The ...

  • Supermicro SuperServer 6028R-TRT - page 109

    Chapter 7: BIOS 7-27  T rusted Computing (Availab le when a TPM device is installed and detected by the BIOS) Conguration Security Device Support If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard security devices will be enabled for TPM support to enhance data integrity and network security . Please reboot ...

  • Supermicro SuperServer 6028R-TRT - page 110

    7-28 S UPER S ERVER 6028R-TR/TRT User's Manual  ACPI Settings WHEA Support Sel ec t Enab led t o supp or t th e Win dow s Har dwa re Er ro r Ar ch itec tu re ( W HE A) pl at - for m an d prov ide a c o mmo n inf ra str uc tur e for t he sys tem to h andl e har dwa re er ro r s wit hin t he W ind ows O S envi ron ment t o red uc e system c r ...

  • Supermicro SuperServer 6028R-TRT - page 111

    Chapter 7: BIOS 7-29 7-4 E vent Logs Use this feature to congure Event Log settings.  Change SMBIOS Event Log Settings This feature allows the user to congure SMBIOS Event settings. Enabling/Disabling Options SMBIOS Event Log Select Enabled to enable SMBIOS (System Management BIOS) Event Logging during system boot. The options are Enabled ...

  • Supermicro SuperServer 6028R-TRT - page 112

    7-30 S UPER S ERVER 6028R-TR/TRT User's Manual Memory Correctable Error Threshold Use this item to enter the threshold value for correctable memory errors. The default setting is 10 . Erasing Settings Erase Event Log Select Enabled to erase all error events in the SMBIOS (System Management BIOS) log before an event logging is initialized at bo ...

  • Supermicro SuperServer 6028R-TRT - page 113

    Chapter 7: BIOS 7-31 7 -5 IPMI Use this feature to congure Intelligent Platform Management Interface (IPMI) settings. IPMI Firmware Revision This item indicates the IPMI rmware revision used in your system. IPMI Status This item indicates the status of the IPMI rmware installed in your system.  System Event Log Enabling/Disabling Option ...

  • Supermicro SuperServer 6028R-TRT - page 114

    7-32 S UPER S ERVER 6028R-TR/TRT User's Manual When SEL is Full This feature allows the user to determine what the BIOS should do when the sys - tem event log is full. Select Erase Immediately to erase all events in the log when the system event log is full. The options are Do Nothing and Erase Immediately . Note : After making changes on a se ...

  • Supermicro SuperServer 6028R-TRT - page 115

    Chapter 7: BIOS 7-33 Gateway IP Address This item displays the Gateway IP address for this computer . This should be in decimal and in dotted quad form (i.e., 192.168.10.253). Router MAC Address This item displays the Router MAC address for this computer . ...

  • Supermicro SuperServer 6028R-TRT - page 116

    7-34 S UPER S ERVER 6028R-TR/TRT User's Manual 7-6 Security Settings Thi s men u all ows t he u ser to co n gur e the fol low ing s ec ur it y set t ing s fo r the syste m. Administrator Passw ord Use t his fe atur e to set t he ad min ist rato r pas swo rd wh ic h is re qui red b efo re ente r ing the B IO S setup u til it y. The leng th o ...

  • Supermicro SuperServer 6028R-TRT - page 117

    Chapter 7: BIOS 7-35 7-7 Boot Settings Use th is feat ure to c on g ure Bo ot Set t ing s: Boot Mode Select Use this item to select the type of device to be used for system boot. The options are Legacy , UEFI, and Dual. The default setting is Dual. Fixed Boot Order Priorities This option prioritizes the order of bootable devices that the system ...

  • Supermicro SuperServer 6028R-TRT - page 118

    7-36 S UPER S ERVER 6028R-TR/TRT User's Manual • Dual Boot Order #10 • Dual Boot Order #1 1 • Dual Boot Order #12 • Dual Boot Order #13 • Dual Boot Order #14 • Dual Boot Order #15 Add New Boot Option This feature allows the user to add a new boot option to system boot features. Add Boot Option Use this item to spe ...

  • Supermicro SuperServer 6028R-TRT - page 119

    Chapter 7: BIOS 7-37 7-8 Save & Exit Select the Save & Exit tab from the BIOS setup screen to congure the settings below . Discard Changes and Exit Select this option to quit the BIOS setup without making any permanent changes to the system conguration, and reboot the computer . Select Discard Changes and Exit from the Exit menu and p ...

  • Supermicro SuperServer 6028R-TRT - page 120

    7-38 S UPER S ERVER 6028R-TR/TRT User's Manual Restore Defaults T o set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are manufacture default settings designed for maximum system performance but not for maximum stability . Save As User Defaults T o set this feature, select Save as User Defaults from th ...

  • Supermicro SuperServer 6028R-TRT - page 121

    A-1 Appendix A: BIOS Error Beep Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed at each system boot, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue to boot. The error messages normally appear on the screen. Fatal errors will not allow the sy ...

  • Supermicro SuperServer 6028R-TRT - page 122

    A-2 S UPER S ERVER 6028R-TR/TRT User's Manual Notes ...

  • Supermicro SuperServer 6028R-TRT - page 123

    B-1 Appendix B: System Specications Appendix B System Specications Processors Sin gle o r dua l Intel ® E5-2600 Series (V3) Socket R3 processors in LGA 201 1 sockets (both CPUs must be of the same type) No te: A ll PC I - E s lot s w ill n ot b e en abl ed w h en us in g on ly a si ng le p ro c es so r. See t he m oth er b oa rd layo ut o n ...

  • Supermicro SuperServer 6028R-TRT - page 124

    B-2 S UPER S ERVER 6028R-TR/TRT User's Manual Chassis SC825TQ-R740LPB (2U rackmount) Dimensions: (WxHxD) 16.8 x 3.5 x 25.5 in. (427 x 89 x 648 mm) Weight 57 lbs. (25.9 kg.) System Cooling Three 8-cm system cooling fans System Input Requirements AC Input V oltage: 100 - 240V AC auto-range Rated Input Current: 9 - 3.5A max Rated Input Frequency: ...

  • Supermicro SuperServer 6028R-TRT - page 125

    B-3 Appendix B: System Specications Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-1 1) Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA and Canada), CE Marking (Europe) California Best Management Practices Regulations for Perchlorate Mate ...

  • Supermicro SuperServer 6028R-TRT - page 126

    B-4 S UPER S ERVER 6028R-TR/TRT User's Manual (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com - munication devices or other critical systems whose failure to perform be r ...

Manufacturer Supermicro Category Server

Documents that we receive from a manufacturer of a Supermicro SuperServer 6028R-TRT can be divided into several groups. They are, among others:
- Supermicro technical drawings
- SuperServer 6028R-TRT manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro SuperServer 6028R-TRT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro SuperServer 6028R-TRT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro SuperServer 6028R-TRT, service manual, brief instructions and user manuals Supermicro SuperServer 6028R-TRT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro SuperServer 6028R-TRT.

Similar manuals

A complete manual for the device Supermicro SuperServer 6028R-TRT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro SuperServer 6028R-TRT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro SuperServer 6028R-TRT.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro SuperServer 6028R-TRT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro SuperServer 6028R-TRT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro SuperServer 6028R-TRT, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro SuperServer 6028R-TRT - which should help us in our first steps of using Supermicro SuperServer 6028R-TRT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro SuperServer 6028R-TRT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro SuperServer 6028R-TRT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro SuperServer 6028R-TRT?

Use the form below

If you did not solve your problem by using a manual Supermicro SuperServer 6028R-TRT, ask a question using the form below. If a user had a similar problem with Supermicro SuperServer 6028R-TRT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)