-
Classe Audio CDP-300 - page 1
Owner’ s Manual CDP-300 D VD Play er ...
-
Classe Audio CDP-300 - page 2
2 NO TICE All of us at Classé take extreme care to ensur e that your purchase will remain a prized investment. W e are proud to inform you that all Classé components have been officially appro ved for the European Community (CE) mark. This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the wo ...
-
Classe Audio CDP-300 - page 3
3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. F ollow all instructions. 5. Do not use this apparatus near water . If a liquid does enter your component, immediately disconnect it from the AC mains and take it to your Classé dealer for a thorough checkup 6. Clean only with dry cloth ...
-
Classe Audio CDP-300 - page 4
4 Contents W elcome to the Classé family .......................................................................... 6 a word about installation .......................................................................... 6 Unpacking and Placement ............................................................................... 7 unpacking y our pla ye ...
-
Classe Audio CDP-300 - page 5
5 T he Menu System .......................................................................................... 26 main menu system ................................................................................. 26 system setup .................................................................................... 26 teach IR ......................... ...
-
Classe Audio CDP-300 - page 6
6 W elcome to the Classé famil y Congratulations on your purchase of a Classé product. I t is the result of many years of continuous refinement, and we ar e sure that you will enjo y it for many years to come. W e value our relationship with our customers. P lease allow us to stay in touch with you by returning y our warranty card now , before y ...
-
Classe Audio CDP-300 - page 7
7 Unpac king and Placement unpacking y our pla yer Car efully unpack your DVD play er according to the supplied instructions, and remo ve all accessories from the carton. Important! Keep all pac king materials for future tr ansport of y our Classé product. Shipping y our new component in an ything other than its purpose-designed packing material m ...
-
Classe Audio CDP-300 - page 8
8 serial number The serial number for your D VD player is found on the rear of the unit. Please note and recor d this number on the page entitled Important Safety Instructions for your future r eference. register y our pur chase! Having found the serial number , now would be a good time to fill out the registration car d. Please register your purc ...
-
Classe Audio CDP-300 - page 9
9 w arm up/break-in period Y our new Classé DVD player will deliver outstanding performance immediately . Ho wever , you should expect to hear it improv e somewhat as it reaches its normal operating temperatures and its various components “br eak-in.” It has been our experience that the greatest changes occur within the first 300 hours, as th ...
-
Classe Audio CDP-300 - page 10
10 Special Design F eatur es flexible GUI The L CD touchscreen on the front panel of your new component supports an extremely flexible and versatile graphical user interface (GUI) while maintaining a clean, uncluttered appearance. The CDP-300 provides a range of controls that might otherwise require dozens of buttons and knobs on the front panel. ...
-
Classe Audio CDP-300 - page 11
11 MENU CDP-300 LOAD � F r ont P anel 1 Standb y button & LED indicator The front panel S tandby button will toggle the player between its fully operational status and a standby mode that leaves the player off , yet ready to respond to system commands via any of the supported control options ...
-
Classe Audio CDP-300 - page 12
12 2 Menu button P ressing the front panel M enu button will call up the menu system, replacing the normal status display in the LCD touchscr een of the CDP-300. 3 LCD touchscr een M ost of your interaction with the CDP-300 will be with the front panel L CD touchscreen (and with the CDP-300’ s supplied remote control). I t will usually display th ...
-
Classe Audio CDP-300 - page 13
13 Rear P anel 1 Analog Outputs In most installations, you will want to use both the analog and the digital outputs of the CDP-300. Doing so will allo w you to take full advantage of high resolution multichannel formats such as D VD-Audio, while also passing the multichannel digital output to your A/V preamplifier when that is more appropriate. Th ...
-
Classe Audio CDP-300 - page 14
14 F or this reason, we str ongly recommend using the balanced analog interconnections between your Classé components wher ever possible. The pin assignments of these XLR-type female output connectors are: Pin 1: S ignal ground Pin 2: S ignal + (non-inverting) Pin 3: S ignal – (inverting) Connector ground lug: chassis ground These pin assignment ...
-
Classe Audio CDP-300 - page 15
15 F or this reason, you ar e advised to use component video connections whenever possible. This advice holds especially true for the CDP-300, since it incorporates sophisticated video processing circuitry that can convert the standard definition DVDs y ou play to high definition rates that are most compatible with today ’ s best video displays ...
-
Classe Audio CDP-300 - page 16
16 4 Digital Outputs The CDP-300 has three digital outputs, all of which carry the same information. Y ou may use whichever connection you prefer , consistent with the available connections on your A/V preamplifier/pr ocessor . Only one of the three connections is needed. coaxial digital output The coaxial digital output provides a digital audio s ...
-
Classe Audio CDP-300 - page 17
17 Note: Many IR r epeater systems do not yet support the stripped-carrier signal format requir ed by y our D VD play er . If y ours does not, a Delta IR Interface ma y be required to ensur e compatibility between y our IR repeater system and y our Delta-series Classé equipment. Y our dealer can assist you in designing an effectiv e IR repeater sy ...
-
Classe Audio CDP-300 - page 18
18 8 RS-232 Control P ort This port has two purposes: • downloading new operating software into your play er (should new features ever be added, for example) • external control of your preamplifier b y systems such as i-Command ™ , AMX ® and Crestron ™ F or more information, please contact your dealer and ask about home automation systems ...
-
Classe Audio CDP-300 - page 19
19 T he Remote Contr ol Y our new DVD player comes with a versatile remote contr ol which can control both the CDP-300 itself and several aspects of the rest of a Classé-based system. The keys are arranged in logical groups accor ding to their functions. 1 Basic Functions This section along the top of the remote control includes two groups of four ...
-
Classe Audio CDP-300 - page 20
20 • T ime cycles through the four time display modes: time elapsed on tr ack time elapsed on disc time remaining on tr ack time remaining on disc • P rog (for P rogram) allows you to quickly and easily cr eate a programmed sequence of tracks (or chapters) to be played on the current disc. P ressing P rog will take you dir ectly to the program ...
-
Classe Audio CDP-300 - page 21
21 • Disc M enu presents the menu of available chapters, within whatever title you are watching at the moment. (S ee explanation of D VD menus in this section.) • T itle gives you a list of available “ titles ” on the disc you are watching. (See explanation of D VD menus in this section.) • U p/Do wn/Left/Right keys allow you to mo ve wit ...
-
Classe Audio CDP-300 - page 22
22 5 System Controls The CDP-300 remote control also can control user-defined functions as well as the volume and mute functions on a Classé system. • F1/F2/F3/F4 keys are available for controlling aspects of the CDP-300 not cover ed by the other buttons on the remote control. Y ou are able to choose what the CDP-300 should do in response to re ...
-
Classe Audio CDP-300 - page 23
23 Using the CDP-300 Y our CDP-300 includes a versatile touchscreen LCD display which supports both an attractive information display and a flexible menu system. Because of this flexibility , the CDP-300 can present differ ent controls and capabilities when playing a CD, and when playing a DVD. W e will present these separately . CD oper ational ...
-
Classe Audio CDP-300 - page 24
24 controls menu The controls button on the operational display brings up a menu of controls, including repeat mode, shuffle, time display , and program . repeat mode P ressing the r epeat mode button on the controls menu displays a screen on which you may select any of the three r epeat modes available: no repeat, r epeat tr ack, and repeat disc ...
-
Classe Audio CDP-300 - page 25
25 D VD operational menu When a D VD is inserted in the CDP-300, a different set of controls is displayed. the home screen The home screen for D VDs is presented at left in the graphic abov e, and contains basic information about where you ar e within the disc, as well as basic navigation buttons similar to those on your remote control. controls P ...
-
Classe Audio CDP-300 - page 26
26 T he Menu System The CDP-300 uses its versatile touchscreen display to make a wide variety of setup choices and system defaults readily available. U sing these menus, you can easily customize the behavior of your D VD player to suit your particular system ’ s configuration, as well as your personal prefer ences. main menu system P ressing the ...
-
Classe Audio CDP-300 - page 27
27 The teach IR screen pro vides a scrolling list of all the available IR codes in the CDP-300. By scr olling to the command your macro-capable remote needs to learn, and then pressing the send IR code button, the CDP-300 will send the appropriate command code out its front panel—where it can be learned b y your third-party remote control. F or m ...
-
Classe Audio CDP-300 - page 28
28 F or example, if you use the shuffle mode frequently , you may want to consider programming one of the Fkeys to toggle that function on and off . Doing so will save you having to access the control menu, follo wed by pressing the shuffle button (which might be hard to see fr om across the room, even though you could do so from the r emote cont ...
-
Classe Audio CDP-300 - page 29
29 sensors The sensors button on the status screen takes you to the sensors scr een, which displays information about several internal sensors within the CDP-300. I t is unlikely you might ever need the sensor information, unless directed to do so b y a customer service representative at Classé in order to help tr oubleshoot some unexpected proble ...
-
Classe Audio CDP-300 - page 30
30 F or example, if you reduce the timeout to its minimum setting, the backlighting will illuminate the display as soon as you interact with any of the CDP-300 controls, and stay on for only three seconds—just long enough for you to check on something. If you continue to use any of the controls (at least once ev er y three seconds), the display w ...
-
Classe Audio CDP-300 - page 31
31 System Setup P ressing the menu button to the left of the LCD touchscr een, followed by pressing the on screen system setup button, will bring y ou to a menu system that gives you a wide range of control o ver how the CDP-300 wor ks both on its own and as a part of your o verall system. the system setup menu system There are four submenus that c ...
-
Classe Audio CDP-300 - page 32
32 speaker setup If you select the ster eo button, the remaining buttons will be grayed out and made inactive. In this mode, the CDP-300 acts as a v ersatile two channel disc player that can handle many differing disc formats. In a ster eo configuration, many of the decisions you need to make in a multichannel system no longer apply . By selecting ...
-
Classe Audio CDP-300 - page 33
33 digital output The digital outputs of the CDP-300 can be configured in any of three ways, based on how you plan to use the play er: • off — for example, if you plan to use only the multichannel analog outputs, and not send a digital signal along to a separate processor . • raw — which passes along the native signal of whatever disc is p ...
-
Classe Audio CDP-300 - page 34
34 distance The distance setting adjusts the speaker distance settings manually as you might have done with a surround processor . Simply measure the distance with a tape measur e or equivalent, and enter the distance into the menu. The CDP-300 will automatically convert this distance to the appropriate delay , to ensure that you hear the sound fro ...
-
Classe Audio CDP-300 - page 35
35 aspect ratio Y ou have three choices for the way widescreen mo vies will be displayed on your television. The choice should be determined by the capabilities of your television as well as your personal prefer ence. • 4:3 — If you have a 4:3 display and pr efer to have it filled at all times, the CDP-300 will look for an available 4:3 versio ...
-
Classe Audio CDP-300 - page 36
36 prefer ence The DVD standar d supports multiple soundtracks and languages, all on the same disc. This versatility can make playing a D VD more complicated than you might like. By establishing y our preferences, the CDP-300 will be able to select the right soundtrack and language without you having to search through menus. audio format Many D VDs ...
-
Classe Audio CDP-300 - page 37
37 parental contr ol The CDP-300 includes a set of parental controls, similar to what you may have on your cable or satellite TV service. • The set password button allo ws you to set a four-digit numeric password, which will be required to play any disc that ex ceeds the rating you select. • The set rating button gives you a list of eight ratin ...
-
Classe Audio CDP-300 - page 38
38 T roubleshooting In general, refer any service problems to your Classé dealer . Before contacting your dealer , however , check to see if the problem is listed here. I f it is, tr y the suggested solutions. If none of these solves the problem, contact y our Classé dealer . 1 My disc is skipping. ✓ Gently clean the disc itself using a damp, s ...
-
Classe Audio CDP-300 - page 39
39 5. T he screen sho ws an error message and the Eject button does not eject the disc (or the pla yer sho ws some other anomalous behavior). ✓ P ress the S tandby button so the screen dims and the blue light goes on. ✓ U sing the rear panel pow er switch, turn off the unit for at least thirty seconds. Then turn the power back on and pr ess Sta ...
-
Classe Audio CDP-300 - page 40
40 Car e & Maintenance T o remove dust from the cabinet of y our DVD player , use a feather duster or a lint-free soft cloth. T o remove dirt and fingerprints, we r ecommend isopropyl alcohol and a soft cloth. Dampen the cloth with alcohol first and then lightly clean the surface of the player with the cloth. Do not use excessiv e amounts of ...
-
Classe Audio CDP-300 - page 41
41 Specifications All specifications are accurate at the time of printing. Classé reserves the right to make improv ements without notice. ■ F requenc y response (single-ended) 8 Hz – 20 kHz +0/-0.7dB (balanced) 8 Hz – 20 kHz ±0.1dB ■ Distortion (THD+noise) 0.0012% ■ Output voltage (single-ended) 2V rms ■ Output voltage (balanced) 4 ...
-
Classe Audio CDP-300 - page 42
42 Dimensions ...
-
Classe Audio CDP-300 - page 43
...
-
Classe Audio CDP-300 - page 44
Classé Audio 5070 F rançois Cusson Lachine, Quebec Canada H8T 1B3 +1 (514) 636-6384 +1 (514) 636-1428 (fax) http://www .classeaudio.com email: cservice@classeaudio.com Copyright © 2006 Classé Audio, I nc. Printed in Canada. V 2.0 040506 ...
Do you have a question concerning Classe Audio CDP-300?
Use the form below
If you did not solve your problem by using a manual Classe Audio CDP-300, ask a question using the form below. If a user had a similar problem with Classe Audio CDP-300 it is likely that he will want to share the way to solve it.