English dropdown-ico

Manual Huawei v200r001

258 pages 1.8 mb
Download

Go to site of 258

Summary
  • Huawei v200r001 - page 1

    HUAWEI ® 6. Secur ity C onfigurati on 7. VPN C onfigura tion 8. Relia bility Configur ation 9. QoS Co nfigurati on 10. DDR Con figur a tion 11. VoIP Configura tion VRP User Manual – Confi guration Guide Volume 3 V200R001 ...

  • Huawei v200r001 - page 2

    VRP User Manual – Configuration Guide Volume 3 Manual Version T2-080168- 20011213-C- 1.5 Product V ersion V2 00R0 01 BOM 31010868 Copyright © 2001 by Huawei Technologies Co., Ltd. A ll Ri ght s Reserved No part of this document m ay be reproduc ed or trans mitted in an y form or by an y means without prior written c onsent of Hua wei T echnologi ...

  • Huawei v200r001 - page 3

    A bout This Manual Contents To help readers to bett er unders tand, us e and maintai n Quidway s eries routers, we p ublish the manual s uit of Quidwa y series r outers. This m anual suit includes:  VRP User Ma nual Config uration Gu ide (V1.5) -Volum e 1  VRP User Manual Config uration Gu ide (V1.5) - Volume 2  VRP User Manual Config urat ...

  • Huawei v200r001 - page 4

     Module 10 DDR Configura tion (10DC) This module m ainly introd uces the principl e and sp ecific c onfigurat ion of dia l solutions provide d b y VRP1.5, including Leg acy DDR configuratio n, Dialer Prof ile configur ation and modem m anagement configuratio n.  Module 11 VoIP C onfigur ation (11VC) This m odule mainl y introduc es the princ ...

  • Huawei v200r001 - page 5

    Action Description Click Press the left button or right button qui ck ly (left button by default). Double Click Press the left button twice con tinuou sly and quic kly . Drag Press and hol d the le ft button a nd drag it t o a cert ain positi on. Symbol Some distinct s y mbols ar e employed in the m anual to indic ate the specia l notice that shoul ...

  • Huawei v200r001 - page 6

    HUAWEI ® VRP User Manual – Confi guration Guide Volume 3 06 – Security Config uration (SC) ...

  • Huawei v200r001 - page 7

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-1 Chapter 5 Configuration of IKE 5.1 Brie f Introducti on to IKE Protoc ol I. IKE IKE, an Int ernet k ey exchange pr otocol, implem ents h ybrid protocol of both Oak le y and SKEME k ey exchanges in ISAKM P network . T his protocol def ines ...

  • Huawei v200r001 - page 8

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-2 5.2 Configuring IKE 5.2.1 IKE Configuration Task L ist IKE conf iguratio n task list is as f ollows: z Create IKE sec urity pol icy z Select encr yption algorithm z Select authe nticatio n algorithm z Configure pre-s hared ke y z Select h ...

  • Huawei v200r001 - page 9

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-3 z Determine the intensi ty of auth entication a lgorithm , encr yption algori thm and Diff ie-Hellman algorit hm (i.e., the calc ulation r esourc es consum ed and the secur ity capabil ity pro vided). Diff erent algor ithm s are of differ ...

  • Huawei v200r001 - page 10

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-4 Table SC-5-3 Select authentication method Operation Comm and Select authenticati on method authenticatio n pre-sh are Restore the au thentication m ethod to the default v alue no auth entication p re-share By defaul t, pre share k ey (i.e ...

  • Huawei v200r001 - page 11

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-5 Table SC-5-6 Select DH group ID Operation Comm and Select DH g roup ID group {1 | 2 } Restore the de fault value of DH group ID no grou p By defaul t, 768-b it Diffie-Hellm an group (G roup 1) is s elected . 5.2.8 Set Lifetime of IKE Asso ...

  • Huawei v200r001 - page 12

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-6 Flag mean ing: RD-- Read y ST --Stay alive RT- -Repl ac ed FD-- Fadin g Execute t he follo wing com mand to clear s ecurit y associat ion 1. Quidway # clea r crypto i ke sa 1 Then the SA will s how the f ollowing inform ation: Quidway # s ...

  • Huawei v200r001 - page 13

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-7 z Configure an I KE polic y on Gate wa y A, with Polic y 10 is of highest priorit y and the default IKE po lic y is of the lowest prior it y. z Pre-shared k ey authent icatio n algorithm is ado pted. II. Netw orking diagram Host B Host A ...

  • Huawei v200r001 - page 14

    User Manual - C onfigurat ion Guide (Volume 3) Versatile R outing Platfor m Chapter 5 Configurati on of IKE 5-8 Problem 1: Invalid us er ID information Troubleshooting: p lease fol low the steps b elow . User ID inform ation is t he data f or the user orig inating IP Sec com m unication to id entif y itself. In prac tical appl ications we can use u ...

  • Huawei v200r001 - page 15

    HUAWEI ® VRP User Manual – Confi guration Guide Volume 3 07 – VPN Configura tion (VPN) ...

  • Huawei v200r001 - page 16

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Table of Co ntents i Table of Conte nts Chapter 1 Ov erview of VPN ..................................................................................................... .... 1-1 1.1 VPN f eatures.............................................................................. ...

  • Huawei v200r001 - page 17

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 VPN Overview 1-1 Chapter 1 VPN O v er v iew Virtual Priv ate Netw ork, VPN f or short, is one of the rapid ly deve loping technol ogies along with the developm ent of Internet in rec ent years. In the wake of enterpris e expansion, wid ely locate d clients and in ...

  • Huawei v200r001 - page 18

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 VPN Overview 1-2 5) W ith VPN, users c an mak e mobile acc ess at an y time and plac e, meeti ng the increas ing m obile ser vice requ irem ents. 6) VPN with servic e qualit y guarantee, e.g. M PLS VPN, c an provide dif ferent l evels of ser vice qualit y guarant ...

  • Huawei v200r001 - page 19

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 VPN Overview 1-3 The m aintenance f unction of VPN is al located to b e completed by to ISP (the users are allowed to m anage and control serv ices to som e extent) and V PN functions ar e mainl y fulf illed on the equipm ent at net work side. Th is practice redu ...

  • Huawei v200r001 - page 20

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 VPN Overview 1-4 Extranet VPN means that the VPN exte nds Intr anet to partn ers and c lients through VPN, so th at differ ent enterprises can build th eir VPNs throu gh public n etwork s. IV. Accord ing to ne tworking mod el 1) Virtual Leased L ine (VL L) VLL s ...

  • Huawei v200r001 - page 21

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-1 Chapter 2 Configura tion of L2TP 2.1 Brie f Intr oductio n to L2T P Prot ocol 2.1.1 Ov ervie w of VPDN I. Br i e f i nductio n to VPDN In VPDN, V PN is f ulfilled with dia l-up and access services (ISDN PST N) of public network , which ...

  • Huawei v200r001 - page 22

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-2 1) NAS is pro vided b y telecom departm ents or larg e ISPs. As the acces s server of VPDN, N AS provid es W AN interf aces, is in c harge of c onnecting P STN or ISD N, and suppor ts vari ous LAN pro tocols, sec urity m anagem ent and ...

  • Huawei v200r001 - page 23

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-3 L2TP hea der i nc lu des th e inf orm ation of Tunnel ID and S ess io n ID, which ar e us ed t o identif y different tunnels and sessions. The m essages with the sam e T unnel ID an d different Ses sion ID will be m ultiplexed i n one t ...

  • Huawei v200r001 - page 24

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-4 LAC LN S LAC LN S LAC cli e nt Remote clie nt Home L AN PSTN/I SDN Inte rn et Inte rn et Home L AN Figure VP N-2-2 Two typical L2TP tunnel modes IV. Ca ll setup flow of L2 TP tunn el Call setu p flow of L2T P channe l is sho wn in the f ...

  • Huawei v200r001 - page 25

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-5 LAC LN S WAN PSTN/I SDN LAC RADI US ser ver LNS RADI US ser ver (5)Request t unnel message user = domain pass wor d = quid way (6)AV Pai rsTun nel m essag e Loca l nam e( LA C) Tunnel passw ord Tunnel typ e LNS I P Address Access reques ...

  • Huawei v200r001 - page 26

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-6 LNS can be put be hind Intr anet firewall. It can dynamic ally distribu te and manage the addresses of rem ote users and support the a pplicat ion of pr ivate addr esses (RFC1918). T he distribute d addresses f or remote users ar e priv ...

  • Huawei v200r001 - page 27

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-7 Table VPN-2-1 E nable/disable VPDN Operation Comm and Enable VPDN to run. vpdn enabl e Disable VPDN to run. no vpdn enab le Disable VPDN to ru n by def ault. II. Crea te VPDN g roup The inf ormation of dial- up users will be loaded o n ...

  • Huawei v200r001 - page 28

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-8 Table VPN-2-4 L2TP attribute table Attribute valu e Name Meaning 100 Tunnel-Ty pe Tunnel type (L2T P=1). 101 L2TP-Tunnel-Pas sword L2TP tunnel passwo rd. 102 Local-Name Local name of the channel. 103 LNS-IP-Add ress IP address of LNS. 1 ...

  • Huawei v200r001 - page 29

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-9 II. Crea te VPDN g roup LAC and LN S can establish L2T P tunne l only on s pecific VPDN group . Perform the follo wing task in global c onfigur ation m ode. Table VPN-2-7 Create VPDN group Operation Comm and Create VPDN gro up. vpdn gr ...

  • Huawei v200r001 - page 30

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-10 2.2.4 Optional configuration I. Set loc al name o f channel After a c hannel is established, th e users c an respecti vely confi gure the loca l channe l name at LAC side an d LNS side. Perform the follo wing task in the config uration ...

  • Huawei v200r001 - page 31

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-11 LNS side. O nly after passing the two auth enticati ons can the c hannel be est ablished. Only when conf igured at LNS side will it be val id to force loc al end to perf orm CHAP authent ication. If CHAP authent ication is forc ed to p ...

  • Huawei v200r001 - page 32

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-12 z “dnison ly” (Searc h onl y according to c alled number ) z “dom aindnis” (Fir st searc h accord ing to dom ain nam e, then accordi ng to cal led number ) z “dom ainonly” (Sear ch onl y according t o domain name) Perform t ...

  • Huawei v200r001 - page 33

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-13 VIII. Fo rce to dis connect tunne l W hen the user number is 0, or faults occur to the net work, or opera tors tak e the initiati ve to r equire disc onnecting the channe l, the tunnel will be cleared . LAC or LNS can orig inate the re ...

  • Huawei v200r001 - page 34

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-14 Table VPN-2-19 Description of “show l2tp tunnel” command domain Domain n ame Meaning Total tunnels Tunnel numbe r LocID The unique value of l ocal end to i dentify a channel . RemID The unique value of opposite e nd to identify a c ...

  • Huawei v200r001 - page 35

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-15 III. C onfigur ation pr ocedure 1) Configurat ion at us er side: Set user nam e to “vpnus er”, password to “ hello” ( the user nam e and pas sword ha ve been regis tered in N AS or compan y) and dial-in num ber to”17 0” at ...

  • Huawei v200r001 - page 36

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-16 2.4.2 Cli ent-Initialized VPN I. Netwo rking requ irement VPN user s first connec t Internet, then orig inate tu nnel connecti on request to L NS. After LNS has accept ed the re quest, a tu nnel cha nnel is establis hed bet ween LNS an ...

  • Huawei v200r001 - page 37

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-17 ! Conf igure Virtual-T em plate 1. Quidwa y (config) # interf ace virtual- template 1 Quidwa y (config- if-virtua l-tem plate1)# ip addr ess 192.16 8.0.1 25 5.255.255. 0 Quidwa y (config- if-virtua l-tem plate1)# ppp a uthentic ation c ...

  • Huawei v200r001 - page 38

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-18 Quidwa y(config- vpdn1)# local nam e LAC Quidwa y(config- vpdn1)# request dialin l2tp ip 20 2.38.160.2 domain hu awei.com Quidwa y(conf ig- vpdn1)# ppp authent icat ion pap ! Set user nam e and password. Quidwa y(config)# user vpnus er ...

  • Huawei v200r001 - page 39

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of L2TP 2-19 Quidw ay(config) # inter face virtua l-tem plate 1 Quidwa y(config- if-virtua l-tem plate1)# ip ad dress 192. 168.0.1 25 5.255.255.0 Quidwa y(config- if-virtua l-tem plate1)# ppp au thentica tion cha p Quidwa y(config- if-virtua l-tem ...

  • Huawei v200r001 - page 40

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-1 Chapter 3 Configuration of GRE 3.1 Brie f Introd uction to GRE Protoco l I. Bri e f i ntroducti o n to the pr ot ocol GRE ( Generic Routing E ncapsulat ion) protoc ol can encapsu late the da tagram of som e network layer pr otocols ( e.g ...

  • Huawei v200r001 - page 41

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-2 Deli very Hea der (Transport Protoco l) GRE H eader (Encapsul at ion Prot ocol ) Paylo ad Pack et (Passenger Prot ocol) Figure VP N-3-1 Encapsulated tunnel message format For exam ple: T he form at of IPX transmis sion mes sage encapsul ...

  • Huawei v200r001 - page 42

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-3 Rout er r r r r r Tunnel R outer Rout er Router R outer Figure VP N-3-4 Enlarge network operating range W hen using RIP , if the hop count be tween two term inals i n the above figur e is m ore than 15, the t wo term inals can not comm u ...

  • Huawei v200r001 - page 43

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-4 z Set the encapsulat ion m ode of tunnel interfac e mess age. z Set the k ey of tunne l interf ace. z Set tunn el interf ace to chec k with chec k sum . z Set tunn el interf ace to s ynchronize datagram serial n umbers. 3.2.2 Creating Vi ...

  • Huawei v200r001 - page 44

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-5 3.2.5 Setting the Network A ddress of Tunnel Interface Configure network address of tunnel interf ace s o that the c hannel s upports dynam ic routing pro tocol. T he users ar e recomm ended to set the network address es at both ends of ...

  • Huawei v200r001 - page 45

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-6 compar es it with t he check sum in the mes sage. If the two chec k sums ar e identica l, the mess age will be f urther proces sed, or it will be disc arded. If only on e end of the tunnel is config ured to chec k with the chec k sum , t ...

  • Huawei v200r001 - page 46

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-7 1) Show the status of des ignated tunnel inter face. Quidwa y# show int erfac e tunnel 1 Tunn el1 is up, line protocol is up Intern et add re ss is 3.1.1. 1 255.255 .255 .0 10 packe ts inp ut , 640 bytes 0 input er rors , 0 br oadcast, 0 ...

  • Huawei v200r001 - page 47

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-8 RouterA(c onfig-if -Ethernet0)# ip addres s 10.1.1.1 255.255.2 55.0 RouterA(c onfig-if -Ethernet0) # ipx networ k 1e ! Enter tu nnel sour ce interf ace. RouterA( config)# interfac e serial 0 RouterA(c onfig-if -Serial0)# ip address 192.1 ...

  • Huawei v200r001 - page 48

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Configurati on of GRE 3-9 RouterB(c onfig-if -tunnel0)# tunnel dest ination 1 92.13.2.1 ! Conf igure a static route t o Group1. RouterB(c onfig)# ipx route 1e 1f .b.b.b 3 0000 15 3.5 Tro ubles hooting GRE As GRE c onfigur ation is relative ly sim ple, on ly the c ...

  • Huawei v200r001 - page 49

    HUAWEI ® VRP User Manual – Confi guration Guide Volume 3 08 – Reliability Configuration (LC) ...

  • Huawei v200r001 - page 50

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Table of Co ntents i Table of Conte nts Chapter 1 Configuration of Backup C enter ............................................................................... 1-1 1.1 Back up Center Over view .............................................................................. ...

  • Huawei v200r001 - page 51

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-1 Chapter 1 Configuration of Backup Center 1.1 Bac kup Ce nter Ov erview T o enhanc e network ’s reli ability , VRP pro vides perf ect back up func tions through the use of Bac kup Cent er . z Interfac es that can be back ed u ...

  • Huawei v200r001 - page 52

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-2 If the main int erface is a virtual c ircuit, it shoul d be treate d differ ently depend ing on the type of the virtual circ uit: firs tly , s pecif y its logical channel num ber in the c onfigur ation mode of the ph y sic al ...

  • Huawei v200r001 - page 53

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-3 Table LC-1-4 Establish a corresponding relation between logical channel and virtual circuit or Dialer Map Operation Comm and Specify a l ogical channel numbe r for X.25 vi rtual ci rcuit x25 map protocol address x .121-address ...

  • Huawei v200r001 - page 54

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-4 T o r un following com mands normally , user should r un those com mands f irstly , whic h specif y a physical interf ace or virtual in terfac e template, or a certain logica l channe l, except Et hernet inter face, to backup ...

  • Huawei v200r001 - page 55

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-5 1.3 Monit oring and M aintaini ng of Backup Center Table LC-1-8 monitoring and maintenance of backup center Operation Comm and Turn on the back up debug debug backup { event | packet } 1.4 Ty pical Configu ration o f Back u ...

  • Huawei v200r001 - page 56

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-6 Set int erface Ser ial 1 as the back up inter face f or an X.25 virtua l circuit on int erfac e Serial 0. II. Configurat ion proced ure ! Configure th at interface Ser ial 0 encapsu lates X. 25 virtual c ircuit and specif y it ...

  • Huawei v200r001 - page 57

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 Configurati on of Backu p Center 1-7 Quidwa y(config- if-Serial1) # x25 addres s 3 ! Match lo gical c hannel 3 with an X.25 virtual c ircuit on interf ace Ser ial 1. Quidwa y(config- if-Serial1) # x25 m ap 4.4.4.5 4 li n 3 ! Enter th e configur ation m ode of log ...

  • Huawei v200r001 - page 58

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-1 Chapter 2 Configuration of HSRP 2.1 HS RP Ov er view HSRP (Hot Sta ndb y Router Protoc ol), is a r eliabi lity protoc ol bas ed on hot s tandb y mechanis m. It aim s, when using a router as the gateway , to en hance the co nnection reli ...

  • Huawei v200r001 - page 59

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-2 corres ponding to th is IP addr ess; and as Router A is activ e now , it will re spond to this ARP requ est b y informing the hos t that this MAC ad dress is 00-E0-FC- 00-5F-01 . In this wa y all the mess ages sent by the host to the ga ...

  • Huawei v200r001 - page 60

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-3     Note: 1) Please note that if some Ethernet interface configured with HSRP has its IP address changed, its HSRP will become disabled. 2) If a route is configured with several HSR P Hot Standby Group, then there can be at ...

  • Huawei v200r001 - page 61

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-4 Table LC-2-4 Set HSRP authorization word Operation Comm and Set HSRP authori zation word s tandby [ group-number ] authenticatio n [ string ] By default, the value of group-number is 0 and the authorizatio n word string is “quidwa y? ...

  • Huawei v200r001 - page 62

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-5 Table LC-2-6 Monitor the specified interface Operation Comm and Monitor the s pecified interf ace s tandby [ group-number ] track interfac e-type interfac e- number [ prio rity-reduc ed ] Cancel the moni toring of the sp ecified interfa ...

  • Huawei v200r001 - page 63

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-6 xx-xx -xx-x x-xx indicates th e first 5 bytes of ot her virtual M AC addr esses, the las t byte being the h ot standb y group’s num ber . T he setting is valid f or all H SRP hot s tandby groups o n the conf igured Ether net inter fac ...

  • Huawei v200r001 - page 64

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-7 II. Netw orking diagram Ethernet Etherne t Inte rn et Rout erA Router B 202.38. 160.1 202.38 .160.2 Virtua l IP address 202.38. 160.111 202.38. 160.3 Workstati onA Workstati onB 202.38. 160.4 Serial Serial Se rial Rout er C 129.20. 3.1 ...

  • Huawei v200r001 - page 65

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-8 2.4.2 A n example for setting HSR P to monitor a sp ecified int erface I. Netwo rking requ irements As shown in the abo ve diagram , even if Router A can s till work norm ally , onc e its interfac e that connects Internet f ails, Router ...

  • Huawei v200r001 - page 66

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-9 ! Set hello- time of No. 1 HSRP stand by grou p to be 5 secon ds, and ho ld-tim e be 15 seconds. Quidwa y(config- if-Ethernet0)# s tandb y 1 timer s 5 15 2.4.3 A n example for multiple hot standby groups configuration I. Netwo rking req ...

  • Huawei v200r001 - page 67

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of HSRP 2-10 ! Set th is router to b elong t o number 2 HSR P hot stan dby group a t the sam e tim e, its virtual IP addr es s bein g 202.38.160.1 12. Quidwa y(config- if-Ethernet0)# s tandb y 2 ip 202.38 .160.1 1 2 ! Set th is router to work in pr ...

  • Huawei v200r001 - page 68

    HUAWEI ® VRP User Manual – Confi guration Guide Volume 3 09 – QoS Config uration (QC) ...

  • Huawei v200r001 - page 69

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Table of Co ntents i Table of Conte nts Chapter 1 QoS O verview ........................................................................................................ ..... 1-1 1.1 About Q oS ............................................................................... ...

  • Huawei v200r001 - page 70

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 QoS ov erview 1-1 Chapter 1 QoS O verv iew 1.1 Abo ut QoS In traditi onal IP net works, all pac kets are processed e quall y . Eac h router pr ocesses the pack ets with first- in firs t-out (FIF O) polic y . It s ends the pac k et to the dest inatio n in th e mod ...

  • Huawei v200r001 - page 71

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 QoS ov erview 1-2 overloa ded. W hen the netwo rk is congested, it c an als o guarantee the low de lay high pass of som e types of pac kets. III. Differen tiated Service Differentiated s ervice is to clas sif y services with the s ame requir ement, an d to pr ovi ...

  • Huawei v200r001 - page 72

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 QoS ov erview 1-3 z Ensuring n etwork service f or the sp ecified dat a flow. F or exam ple, it en ables mu ltimedia data flow an d voice flo w that are sensiti ve to delay to recei ve the service in t im e. Quidway s er ies routers can realize m ultiple c o nges ...

  • Huawei v200r001 - page 73

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-1 Chapter 2 Traffic Clas sificatio n and Policing 2.1 Traf fic Classific ation and P olicing 2.1.1 Introduction to Traffic Class ification Pack ets can be c lassifie d into m ultiple types of differ ent precede nce lev els ...

  • Huawei v200r001 - page 74

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-2 2.1.2 Introduction to Traffic Policing For ISP (Inter net Service Provid er), it is neces sar y to control the load and traffic impor ted into the n etwork by the user . For the Intrane t, traffic c ontrolling of some app ...

  • Huawei v200r001 - page 75

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-3 II. Traffic Measuring with Token Bucket W hether the total num ber of T ok ens in T ok en Bucket m eet the pack et for warding requirem ent is the b asis to eval uate the tr affic size. If ther e are enough T ok en to for ...

  • Huawei v200r001 - page 76

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-4 Set the cor respond ing CAR based on one of the follow ing features : z IP z IP prece dence z MAC addres s z IP Acces s Control List ( includi ng Standard Acces s Control Lis t or Extend ed Access Co ntrol li st) Multip l ...

  • Huawei v200r001 - page 77

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-5 different prec edence - rat e-limit-num ber or m acaddres s - rate-lim it-numb er , two or m ore CAR rules can be def ined. 2.2.3 A ppl y the CA R Rule on the Interface W hen CAR rule is applied to a n interface, only the ...

  • Huawei v200r001 - page 78

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-6 < Inpu t > Matched : rate-lim it -g roup 1 Para ms: ra te 8000 bps, normal burs t 8000 byt es, maxi mum bu rs t 8000 byt es From 2-00 -00 0:00:0 0 to 25 7--50-07 84 77:06:00 Conf orme d 0 pa ckets, 0 bytes; acti on: ...

  • Huawei v200r001 - page 79

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-7 Quidwa y(config- if-Ethernet0)# ip address 190.0.0.1 255.25 5.255.0 Quidwa y(config- if-Ethernet0) # rate-lim it input 8000 8 000 8000 conf orm tr ansmit exceed dro p ! Appl y CAR to all t he pack ets outing Et hernet i n ...

  • Huawei v200r001 - page 80

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-8 2.3.3 Configure CA R Rules Based on the Priority Level I. Re quirement s z Matchi ng CAR bas ed on the priorit y level t o the pack ets entering s erial 0 of router A, forwar ding the p ack ets accor ding with the qualifi ...

  • Huawei v200r001 - page 81

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Traffic Cla ssification a nd Policing 2-9 II. Netwo rking dia gram Figure QC-2-5 Networking diagram of configuring CAR based on the MAC address III. Co nfigura tion Configure r outer A ! Matching CAR base d on MAC addres s to the packets entering ser ial 0 of rou ...

  • Huawei v200r001 - page 82

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-1 Chapter 3 Conges tion Manageme nt 3.1 Con gestion and C ongesti on Manag ement 3.1.1 A bout Congestion For a network unit, if data pack ets reach the inter face at a speed fas ter than that the interfac e can trans mit the data pack et ...

  • Huawei v200r001 - page 83

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-2 resend the data pac kets due to tim eout, and conges tion happens again, and the n the pack ets are sent again , a vicious circle happe ns. T o manage the conges tion of network , people adopt s ome pol icies. W hen congestion occ urs, ...

  • Huawei v200r001 - page 84

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-3 3.1.3 Sele cting Congestion Management Policy Quidway s eries r outers im plement the ab ove f our congest ion m anagem ent policies (FIFO, PQ , CQ and W FQ) at the Ether net port and seria l port ( PPP , FR and HDL C encapsu lation), ...

  • Huawei v200r001 - page 85

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-4 Table QC-3-1 Comparison table of congestion management policies No. of queue Advantages Disadvan tages FIFO 1 1.No configurati on is needed, and easy to use. 2. Simple process ing with les s processing del ay 1. All packets are treated ...

  • Huawei v200r001 - page 86

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-5 I. FI FO Dequeuing dispatch Packets leaving the interface queue Packets sent from this interface Figure QC-3-2 Schematic diagram of FIFO queuing As sho wn in the f igure above, pack ets enter FIFO queue i n sequ ence. The dequeu ing se ...

  • Huawei v200r001 - page 87

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-6 III. CQ Qu e u e 1 Qu e u e 2 Qu e u e 1 6 ... C la s s ific a tio n D e queui ng di spat ch P ac ke t s l eav i ng t he i nt er f ace 10% 10% 30% Q ueue P a c k e ts s e n t fr o m th is in te r fa c e Figure QC-3-4 Schematic diagram ...

  • Huawei v200r001 - page 88

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-7 IV. WFQ queue 1 queue 2 queue N ... Classi ficat ion Dequeui ng dispat ch Packets l eavi ng the interfac e Queue Packets sent from th is in terfac e Figure QC-3-5 Schematic diagram of weighted fair queuing W FQ embodies the weight on t ...

  • Huawei v200r001 - page 89

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-8 II. Con figuring p riority queue Priorit y queue inc ludes the definit ion for a gr oup of priority queu es and it spec ifies in which que ue a pack et is plac ed and the m axim um length of diff erent priorit y queues. T o c omplete t ...

  • Huawei v200r001 - page 90

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-9 If protocol-name is IPX , the value of queue-key word and keyword-val ue is show n in the table belo w . Table QC-3-4 Value of queue-keyword and keyword-value in IPX queue-keywo rd keyword-value Meaning Null Null If it is an IPX pack e ...

  • Huawei v200r001 - page 91

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-10 Table QC-3-7 Configuration of queue length of priority queue Operation Comm and Configure the queue length of the priority queue priority-list list-number que ue-li mit hig h-limit medium-limit norm al-limit low-limit Restore the de f ...

  • Huawei v200r001 - page 92

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-11 3.2.2 Configuring CQ I. CQ conf i gurati on task l i st Configurat ion task of c ustom queuing is as f ollows: z Configure the cust om queue z Apply the custom queue to the i nterfac e z Maintenanc e and m onitoring of the custom queu ...

  • Huawei v200r001 - page 93

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-12 Table QC-3-11 Configuring the custom queue according to network layer protocol Operation Comm and Configure the cus tom queue acc ording to the network l ayer protocol custom-list l ist-number protocol protocol-na me queue- number [ q ...

  • Huawei v200r001 - page 94

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-13 Table QC-3-14 Configuration of queue length of the custom queue Operation Comm and Configure the queue length of the c ustom queue custom-list list-number queue queue-n umber limit q ueue-limi t Restore the d efault value of custom qu ...

  • Huawei v200r001 - page 95

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-14 The interf ace adopts FIFO queu ing b y default. IV. Maint ai ning an d m o nitoring the cu stom que u e Table QC-3-17 Maintenance and monitoring of the custom queue Operation Comm and Show the custom qu eue status show que ui ng cust ...

  • Huawei v200r001 - page 96

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-15 Serial 0 64 256 3.3 Con figurati o n Example of Conge stion Man a gement 3.3.1 PQ Configuration Exa mple ! Def ine access c ontrol list, perm itting pack ets from network s egment 10.10.0. 0 to pass. Quidwa y(config)# access -list 1 p ...

  • Huawei v200r001 - page 97

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-16 II. Netw orking diagram PC1:10.1.3.10 PC3:10.1.4.10 PC2:10.1.5.10 PC4:10.1.6.10 e0:10.1.5.1 e1:10.1.6.1 e0.0:10.1.3.1 e0.1:10.1.4.1 s0:192.168.0.1 s0:192.168.0.2 (10.1.1.1)tunnel0(10.1.1.2) (10.1.7.1)tunnel1(10.1.7.2) 8240 3680 Figre ...

  • Huawei v200r001 - page 98

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-17 ! Conf igure Tunnel0 Quidwa y(config- if-Tunnel0)# ip address 10.1.2.1 25 5.255.255. 0 Quidwa y(config- if-Tunnel0)# tunnel sour ce 192. 168.0.2 Quidwa y(config- if-Tunnel0)# tunnel d estination 1 92.168. 0.1 ! Conf igure Tunnel1 Quid ...

  • Huawei v200r001 - page 99

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 3 Congestio n Managem ent 3-18 Quidwa y(config- if-Tunnel1)# tunnel d estination 1 92.168. 1.2 3.4 Tro ublesho oting of Con gestion Management The c ommon f ault of congestion m anagem ent configurat ion is t hat the expec ted goal of the user can no t be fulf ille ...

  • Huawei v200r001 - page 100

    HUAWEI ® VRP User Manual – Confi guration Guide Volume 3 10 – DDR Configuration (DC) ...

  • Huawei v200r001 - page 101

    User Manual -C onfigurati on Guide (Volu me 3) Versatile R outing Platfor m Table of Co ntents i Table of Conte nts Chapter 1 DDR Configuration ................................................................................................... .. 1-1 1.1 Brief Intro duction t o Dial Config uration ................................................... ...

  • Huawei v200r001 - page 102

    User Manual -C onfigurati on Guide (Volu me 3) Versatile R outing Platfor m Table of Co ntents ii 1.8 Troubl eshooting DDR ..................................................................................................... 1- 75 1.8.1 DDR F ault Diagnos is ........................................................................................... ...

  • Huawei v200r001 - page 103

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-1 Chapter 1 DDR Configuration 1.1 Brie f Introd uction to Di al Confi guratio n VRP1.3 pr ovides s ubscriber s with a perf ect dial s olution : z Suppor t various dial in terfac es, includi ng as ynchronous s erial por ts, ISDN BRI interfac ...

  • Huawei v200r001 - page 104

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-2 1.3 Prep aring DDR Configu ration For a net work needi ng DDR, subs cribers c an mak e configurati on preparat ions follo wing the flo w belo w . z Specif y which routers in the n etwork need DDR, whic h interfaces of these routers use DDR ...

  • Huawei v200r001 - page 105

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-3 For deta ils about th e conf igurations of link layer protocol, network layer protoc ol and dynam ic routing protoco l, please ref er to “W AN Protocol Configur ation” , “Network Protoco l Configurat ion” and “ Routing Pr otocol ...

  • Huawei v200r001 - page 106

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-4 Please use the fol lowing c ommands in the conf iguration mode of the designate d physic al int er f ac e. Table DC-1-1 Enable DDR in Legacy DDR mode Operation Comm and Enable DDR in Leg acy DDR mode dialer in-ban d This comm and is need e ...

  • Huawei v200r001 - page 107

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-5 T o c onfigure a Di aler Rotary Gr oup, foll ow the ste ps belo w: Step 1: cr eate a lo gic dial i nterface. Please us e the fol lowing c ommand in g lobal co nfigurat ion m ode. Table DC-1-4 Create a logic dial interface Operation Comm an ...

  • Huawei v200r001 - page 108

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-6 Diale r Interface 1 Diale r Interface 2 Ro uter Serial 1 Serial 2 Serial 4 Serial 3 Serial 5 Serial 6 Figure DC-1-2 S chematic diagram of Dialer Rotary Group III. Configure an interface to receive calls 1) Receive ca lls fr om a s ingle po ...

  • Huawei v200r001 - page 109

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-7 Table DC-1-7 Select PPP encapsulation and select CHAP or PAP authentication Operation Comm and Select PPP encapsulation encap sulation ppp Select authenticati on mode ppp aut hentica tion { chap | pap } Step 4: set the c orrespond ence bet ...

  • Huawei v200r001 - page 110

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-8 Table DC-1-11 Configure to send calls to and receive calls from multiple points Operation Comm and Enter the configu ration mode of a specified phy sical interfac e (used in global configuration mode) interface interface -type interfac e-n ...

  • Huawei v200r001 - page 111

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-9 Table DC-1-13 Set the idle time of busy interface Operation Comm and Set the idle time of busy interface dialer fast-idle seconds 3) Set link disconnec tion tim e W hen a link is disconnect ed due to fail ure or onh ook, a new co nnection ...

  • Huawei v200r001 - page 112

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-10 Table DC-1-16 Set access control of the dial interface Operation Comm and Configure standa rd access c ontrol li st (used in global configuration mode ) access-list access-list-numb er { deny | permit } [wildcard -mask] Configure extend e ...

  • Huawei v200r001 - page 113

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-11 In a D ialer Rotar y Group, when th e traffic bandwidth of a ph y s ical in terface ex ceeds the preset thres hold, DDR will s tart another physical interf ace and transfer data to t he same des tination. Perform the follo wing task in th ...

  • Huawei v200r001 - page 114

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-12 Figure DC-1-3 Schematic diagram of the relation between dial interfaces, dialer pool and physical interfaces In the abov e diagr am, dia l interfac e 1 uses Dialer Pool 2, p hysical interf ace BRI 1 belongs t o Dialer Pool 2, with a prior ...

  • Huawei v200r001 - page 115

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-13 Table DC-1-22 Configure the features of the dial interface Operation Comm and Set fast-idle time dialer fast-idl e seconds Set idle-timeout time dialer idle-timeo ut seconds Set wait-f or-carrie r-time dialer wait-fo r-carrier-time second ...

  • Huawei v200r001 - page 116

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-14 z General supp ort (both en ds have f ixed net work la yer addresses and h ave implem ented RFC157 0). z Support when Client end needs dynam ic distr ibution of network la yer addresses . z Support when onl y Server end h as im plemented ...

  • Huawei v200r001 - page 117

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-15 ii. The m atching bet ween the incom ing ca ll num ber and dialer c aller is “ right en d matc hing”, with “*” representin g any char acter. iii. If m ultiple dial er callers matc h the incoming ca ll num ber, then select one in l ...

  • Huawei v200r001 - page 118

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-16 2) Use Legac y DDR to conf igure P PP call back The c onfigurations of Client en d are sho wn in the f ollowing ta ble. ...

  • Huawei v200r001 - page 119

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-17 Table DC-1-28 Client end using Legacy DDR to configure PPP Operation Comm and Enter the configu ration mode of the dial inte rface (used in global confi guration mode ) interface int erface-type int erface-number Select PPP encapsulation ...

  • Huawei v200r001 - page 120

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-18 Table DC-1-30 Client end using Dialer Profile to configure PPP callback Operation Comm and Enter the configu ration mode of the dial inte rface (used in global configuration mode ) interface dial er interface-n umber Select PPP encapsulat ...

  • Huawei v200r001 - page 121

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-19 Table DC-1-32 Use Legacy DDR to configure ISDN dedicated line Operation Comm and Configure dial string, acco rding to whic h DDR determines datag ram (used i n the configu ration mode of the dial interface) dialer-list dial er-group proto ...

  • Huawei v200r001 - page 122

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-20 Table DC-1-34 Configure cyclic use of dialer map Operation Comm and Enter the configu ration mode of the dial inte rface (used in global configuration mode) interface int erface-type i nterface-num ber Configure dial er map (used i n the ...

  • Huawei v200r001 - page 123

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-21 1.6 DDR Typic al Configu ra tion Examp le 1.6.1 Leg acy DD R I. Netwo rk requirements In the f ollowing diagram , the local router XXX and the rem ote routers YYY an d ZZZ are connecte d through DDR. Remote routers YYY and ZZZ can call th ...

  • Huawei v200r001 - page 124

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-22 Quidway (config-if-Dialer1)# ppp cha p password 0 xxxsystem ! Enable DDR in Legac y DDR m ode Quidwa y (config- if-Dialer 1)# dialer i n-band ! Designat e the subord inate Group Quidwa y (config- if-Dialer 1)# dialer- group 1 ! Indicati n ...

  • Huawei v200r001 - page 125

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-23 1.6.2 Dia ler Profile I. Netwo rking requ irements In the f ollowing diagr am, the c entral router is c onnected to t he rem ote end through f our ISDN BRI interf aces. It can send an d rece ive calls. Each rem ote end is in a differ ent ...

  • Huawei v200r001 - page 126

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-24 Quidwa y(config- if-Dialer2) # encaps ulation p pp Quidwa y(config- if-Dialer2)# di aler rem ote-nam e Medium user Quidwa y(config- if-Dialer2)# di aler str ing 526454 0 Quidwa y(config- if-Dialer2) # dialer po ol 1 Quidwa y(config- if-Di ...

  • Huawei v200r001 - page 127

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-25 Quidwa y(config- if-Bri3) # dialer pool- mem ber 2 prior ity 150 Quidwa y(config- if-Bri3) # ppp authent ication ch ap ! Conf igure rem ote user nam e and pas sword f or CHAP a uthentic ation and set dial control. Please ref er to Exam pl ...

  • Huawei v200r001 - page 128

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-26 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer in- band Quidwa y(config- if-Serial 0)# dialer-gr oup 1 Quidwa y(config- if-Serial0) # dialer m ap ip 100. 1.1 ...

  • Huawei v200r001 - page 129

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-27 Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer p ool-mem ber 1 Quidwa y(config- if-Serial0) # encapsu lation ppp Quidwa y(conf ig- if-Ser ial0) # ppp authent ic ati on pap Solution 3: use Legacy DDR configurati ...

  • Huawei v200r001 - page 130

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-28 Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# user usera pas sword 0 passa Quidwa y(config)# interf ace dialer 0 Quidwa y(config- if-Dialer0) # ip addres s 100.1.1. 2 255.255. 255.0 Quidwa y(config- if-Dialer0)# ...

  • Huawei v200r001 - page 131

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-29 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial0) # ip address 100.1.1.1 255.255.25 5.0 Quidwa y(config- if-Serial 0)# dialer in- band Quidwa y(config- if-Serial 0)# dia ...

  • Huawei v200r001 - page 132

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-30 Quidwa y(config- if-Dialer0)# pp p pap sent- usernam e user a password 0 passa Quidwa y(config- if-Dialer0) # dialer po ol 1 Quidwa y(config- if-Dialer0) # dialer str ing 881005 2 Quidwa y(config- if-Dialer0) # interf ace dialer 1 Quidwa ...

  • Huawei v200r001 - page 133

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-31 Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# user usera pas sword 0 passa Quidwa y(config)# interf ace dialer 0 Quidwa y(config- if-Dialer0) # ip addres s 122.1.1. 2 255.255. 255.0 Quidwa y(config- if-Dialer0)# ...

  • Huawei v200r001 - page 134

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-32 III. C onfigur ation pr ocedure Solution 1: use Leg acy DDR conf iguration m ode to reali ze the following at t he serial port: 1) Configure r outer A: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# interf ace dia ...

  • Huawei v200r001 - page 135

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-33 Quidwa y(config- if-Serial 0)# dialer in- band Quidwa y(config- if-Serial 0)# dialer-gr oup 1 Quidwa y(config- if-Serial0) # dialer m ap ip 100. 1.1.1 8810 054 Quidwa y(config- if-Serial0) # dialer m ap ip 100. 1.1.1 8810 052 Solution 2: ...

  • Huawei v200r001 - page 136

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-34 Quidwa y(config- if-Serial 1)# dialer p ool-mem ber 1 Quidwa y(config- if-Serial 1)# dialer p ool-mem ber 2 Quidwa y(config- if-Serial1) # encapsu lation ppp Quidwa y(conf ig- if- Serial 1)# ppp authent ication pap 2) Configure r outer B: ...

  • Huawei v200r001 - page 137

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-35 Quidwa y(config- if-Serial0) # encapsu lation ppp Quidwa y(conf ig- if-Ser ial0) # ppp authent ic ati on pap Solution 3: use Legacy DDR configurati on mode to realize the f ollowing at ISDN BRI and PRI interf ac es : 1) Configure r outer ...

  • Huawei v200r001 - page 138

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-36 Quidwa y(config- if-Dialer0) # interf ace dialer 1 Quidwa y(config- if-Dialer1) # ip addres s 122.1.1. 1 255.255. 255.0 Quidwa y(config- if-Dialer1)# di aler rem ote-nam e userc Quidwa y(config- if-Dialer1) # dialer-gr oup 1 Quidwa y(conf ...

  • Huawei v200r001 - page 139

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-37 Quidwa y(config- if-Dialer0) # dialer-gr oup 1 Quidwa y(config- if-Dialer0) # dialer po ol 1 Quidwa y(config- if-Dialer0)# pp p pap sent- usernam e user c password 0 passc Quidwa y(config- if-Dialer0)# di aler str ing 881014 8 Quidwa y(co ...

  • Huawei v200r001 - page 140

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-38 Quidwa y(config)# dialer- list 1 protoco l ipx perm it Quidwa y(config)# ipx routi ng 1.1.1 Quidwa y(config)# interf ace serial 0 Quidwa y(config- if-Serial 0)# ipx net work 1 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y( ...

  • Huawei v200r001 - page 141

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-39 Quidwa y(config- if-Serial0) # encapsu lation ppp Quidwa y(conf ig- if-Ser ial0) # ppp authent ic ati on pap 2) Configure r outer B: Quidwa y(config)# dialer- list 1 protoco l ipx perm it Quidwa y(config)# ipx routi ng 1.1.2 Quidwa y(conf ...

  • Huawei v200r001 - page 142

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-40 Solution 4: use Dia ler Profile conf iguration mode to r ealize the f ollowing a t ISDN BRI and PRI interf ac es 1) Configure r outer A: Quidwa y(config)# dialer- list 1 protoco l ipx perm it Quidwa y(config)# ipx routi ng 1.1.1 Quidwa y( ...

  • Huawei v200r001 - page 143

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-41 1.6.7 DDR Bear ing IP and IPX at the Sa me Time DDR can bear IP a nd IPX at the sam e time on on e dial connectio n. That is , when a call connection has been estab lished, IP m essage and IPX m essage can be sent at the same tim e on thi ...

  • Huawei v200r001 - page 144

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-42 Quidwa y(config- if-Serial0) # dialer m ap ipx 1.1.1. 2 88100 52 2) Configure r outer B: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# dialer- list 1 protoco l ipx perm it Quidwa y(config)# ipx routi ng 1.1.2 Qui ...

  • Huawei v200r001 - page 145

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-43 2) Configure r outer B: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# dialer- list 1 protoco l ipx perm it Quidwa y(config)# ipx routi ng 1.1.2 Quidwa y(config)# user usera pas sword 0 passa Quidwa y(config)# int ...

  • Huawei v200r001 - page 146

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-44 Quidwa y(config)# interf ace bri 0 Quidwa y(config- if-Bri0)# i p address 100 .1.1.2 255. 255.255.0 Quidw ay(config- if-Br i0)# ipx net work 1 Quidwa y(config- if-Bri0) # dialer-gr oup 1 Quidwa y(config- if-Bri0) # dialer m ap ip 100. 1.1 ...

  • Huawei v200r001 - page 147

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-45 Quidwa y(config- if-Dialer0) # dialer-gr oup 1 Quidwa y(config- if-Dialer0)# di aler str ing 881014 8 Quidwa y(config- if-Dialer0) # dialer po ol 1 Quidwa y(config- if-Dialer0)# pp p pap sent- usernam e user b password 0 passb Quidwa y(co ...

  • Huawei v200r001 - page 148

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-46 Quidwa y(config- if-Dialer0) # encaps ulation p pp Quidwa y(config- if-Dialer0)# pp p pap sent- usernam e user a password 0 passa Quidwa y(config- if-Dialer0) # ppp m ultilink Quidwa y(config- if-Dialer0)# di aler rem ote-nam e userb Quid ...

  • Huawei v200r001 - page 149

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-47 Quidwa y(config- if-Serial0:15) # dialer i n-band Quidwa y(config- if-Serial0:15) # dialer- group 1 Quidwa y(config- if-Serial0:15) # dialer m ap ip 2.2.2 .2 6603 68 Quidwa y(config- if-Serial0:15) # dialer m ap ip 2.2.2 .2 6603 78 Quidwa ...

  • Huawei v200r001 - page 150

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-48 Quidwa y(config)# user userb pas sword 0 passb Quidwa y(config)# interf ace dialer 0 Quidwa y(config- if-Dialer0) # ip addres s 100.1.1. 1 255.255. 255.0 Quidwa y(config- if-Dialer0)# di aler rem ote-nam e userb Quidwa y(config- if-Dialer ...

  • Huawei v200r001 - page 151

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-49 Quidwa y(config- if-Bri0) # dialer pool- mem ber 1 Quidwa y(config- if-Bri0) # encapsulati on ppp Quidwa y(config- if-Bri0) # ppp authent ication p ap 1.6.10 T wo Serial Port s for Dial-up and R emote Dial Connect ion – Case 3 Case 3: D ...

  • Huawei v200r001 - page 152

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-50 Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# interf ace bri 0 Quidwa y(config- if-Bri0)# i p address 100 .1.1.3 255. 255.255.0 Quidwa y(config- if-Br i0)# dialer is dn-leas ed 1 Quidwa y(config- if-Bri0) # diale ...

  • Huawei v200r001 - page 153

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-51 Quidwa y(config- if-Dialer0) # dialer-gr oup 1 Quidwa y(config- if-Dialer0)# pp p pap sent- usernam e user a password 0 passa Quidwa y(config- if-Dialer0) # dialer po ol 1 Quidwa y(config- if-Dialer0)# di aler str ing 8810048 Quidwa y(con ...

  • Huawei v200r001 - page 154

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-52 Quidwa y(conf ig- if-Ser ial0) # ppp authent ic ati on pap 1.6.12 DDR for A ccess Service I. Netwo rking requ irements We have designe d the DDR im plementatio n solution f or access service by way of asynchron ous seri al port and ISDN P ...

  • Huawei v200r001 - page 155

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-53 Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# user user1 pas sword 0 pass1 Quidwa y(config)# user user2 pas sword 0 pass2 Quidwa y(config)# user user3 pas sword 0 pass3 Quidwa y(config)# user user4 pas sword 0 pa ...

  • Huawei v200r001 - page 156

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-54 Quidwa y(config- if-As ync4)# interfac e async 5 Quidway(con fig-if-Async5)# di aler rotary-group 0 Quidwa y(config- if-As ync5)# interfac e async 6 Quidway(con fig-if-Async6)# di aler rotary-group 0 Quidwa y(config- if-As ync6)# interfac ...

  • Huawei v200r001 - page 157

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-55 Quidwa y(config- if-Dialer0) # encaps ulation p pp Quidwa y(config- if-Dialer0) # ppp authe nticatio n chap Quidwa y(config- if-Dialer0) # interf ace async 1 Quidway(con fig-if-Async1)# di aler rotary-group 0 Quidwa y(config- if-As ync1)# ...

  • Huawei v200r001 - page 158

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-56 Quidwa y(config)# user user13 pas sword 0 p ass13 Quidwa y(config)# user user14 pas sword 0 p ass14 Quidwa y(config)# user user15 pas sword 0 p ass15 Quidwa y(config)# user user16 pas sword 0 p ass16 Quidwa y(config)# ip loca l pool 1 100 ...

  • Huawei v200r001 - page 159

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-57 Quidwa y(config- if-Serial2:15) # peer def ault ip a ddress po ol 1 Quidwa y(config- if-Serial2:15) # dialer- group 1 Quidwa y(config- if-Serial2:15) # encapsul ation ppp Quidwa y(config- if-Serial2:15) # ppp auth enticati on chap 1.6.13 ...

  • Huawei v200r001 - page 160

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-58 Quidwa y(config- if-Bri0) # dialer cal ler 8810152 callback 3) Configur e r outer B: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# interf ace bri 0 Quidwa y(config- if-Bri0)# i p address 100 .1.1.2 255. 255.255.0 ...

  • Huawei v200r001 - page 161

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-59 Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# user quidwa yb passwor d 0 quid wayb call back- dialstring 88 10052 Quidwa y(config)# interf ace serial 0 Quidwa y(config- if-Serial0) # ip address 100.1.1.1 255.255. ...

  • Huawei v200r001 - page 162

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-60 III. C onfigur ation pr ocedure Solution 1: using user -configur ed dialer map f or callb ack, w ith rout er A servi ng as server en d. 1) Configure r outer A: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# user p ...

  • Huawei v200r001 - page 163

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-61 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer in- band Quidwa y(config- if-Serial 0)# dialer-gr oup 1 Quidwa y(config- if-Serial 0)# dialer c allback -ser v ...

  • Huawei v200r001 - page 164

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-62 Quidwa y(config- if-Serial0) # ip address 100.1.1.1 255.255.25 5.0 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer in- band Quidwa y(config- if-Serial 0)# dia ...

  • Huawei v200r001 - page 165

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-63 Quidwa y(config- if-Serial 0)# dialer in- band Quidwa y(config- if-Serial 0)# dialer-gr oup 1 Quidwa y(config- if-Serial0) # dialer m ap ip 100. 1.1.2 8810 052 Quidwa y(config- if-Serial0) # dialer m ap ip 100. 1.1.2 8810 060 2) Configure ...

  • Huawei v200r001 - page 166

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-64 1) Configure r outer A: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# interf ace serial 0 Quidwa y(config- if-Serial0) # ip address 100.1.1.1 255.255.25 5.0 Quidwa y(config- if-Serial 0)# physic al-layer async Qu ...

  • Huawei v200r001 - page 167

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-65 Quidwa y(config- if-Serial 0)# exit Quidwa y(config)# logic- channel 1 Quidwa y(config- logic-c hannel1)# bac kup int erface s erial 1 Quidwa y(config- logic- channel1)# ex it Quidwa y(config)# interf ace serial 1 Quidwa y(config- if-Seri ...

  • Huawei v200r001 - page 168

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-66 Quidwa y(config)# interf ace serial 0 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer in- band 1.7.3 Configuring Net work Layer Address T o enable net work la ...

  • Huawei v200r001 - page 169

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-67 Quidwa y(config- if-Dialer0)# di aler rem ote-nam e user1 Quidwa y(config- if-Dialer0) # dialer-gr oup 1 Quidwa y(config- if-Dialer0) # dialer po ol 1 Quidwa y(config- if-Dialer0)# di aler str ing 881005 2 Quidwa y(config- if-Dialer0) # i ...

  • Huawei v200r001 - page 170

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-68 Quidwa y(config- if-Dialer0) # ip addres s 100.1.1. 1 255.255. 255.0 Quidwa y(config- if-Dialer0)# di aler rem ote-nam e remoteus er1 Quidwa y(config- if-Dialer0) # dialer-gr oup 1 Quidwa y(config- if-Dialer0) # dialer- pool 1 Quidwa y(co ...

  • Huawei v200r001 - page 171

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-69 Quidwa y(config- if-Dialer0) # interf ace bri 0 Quidwa y(config- if-Bri0) # no dialer in- band Quidwa y(config- if-Bri0) # dialer pool- mem ber 1 Quidwa y(config- if-Bri0) # encapsulati on ppp Quidwa y(config- if-Bri0) # ppp authent icati ...

  • Huawei v200r001 - page 172

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-70 Quidwa y(config- if-Dialer0)# di aler str ing 881005 2 Quidwa y(config- if-Dialer0) # interf ace serial 0 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer p oo ...

  • Huawei v200r001 - page 173

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-71 Quidwa y(config- if-Bri0) # encapsulati on ppp Quidwa y(config- if-Bri0) # ppp authent ication ch ap Quidwa y(config- if-Bri0) # ppp chap h ost loca luser1 2) Configure r em ote router: Quidwa y(config)# dialer- list 1 protoco l ip per mi ...

  • Huawei v200r001 - page 174

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-72 Quidwa y(config)# user rem oteuser1 pass word 0 rem otepass1 Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# dialer- list 1 protoco l ipx perm it Quidwa y(config)# interf ace dialer 0 Quidwa y(config- if-Dialer0) # ...

  • Huawei v200r001 - page 175

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-73 Quidwa y(config- if-Bri0) # encapsulati on ppp Quidwa y(config- if-Bri0) # ppp authent ication p ap 2) Configure r em ote router: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y(config)# dialer- list 1 protoco l ipx perm it ...

  • Huawei v200r001 - page 176

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-74 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer rot ary-grou p 0 2) Configure r em ote router: Quidwa y(config)# dialer- list 1 protoco l ip per mit Quidwa y( ...

  • Huawei v200r001 - page 177

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-75 Quidwa y(config- if-Bri0) # dialer str ing 88101 48 Quidwa y(config- if-Bri0) # encapsulati on ppp Quidwa y(config- if-Bri0) # ppp authent ication ch ap Quidwa y(config- if-Bri0) # ppp chap hos t rem oteuser1 1.7.6 Configure D ialer-list ...

  • Huawei v200r001 - page 178

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-76 Quidw ay(config) # chat-s cript Quid way(conf ig)#ch at-script yaho " " A T&F OK A T E0S0=0&C1 &D2 OK A T&W Quidwa y(config)# interf ace serial 0 Quidwa y(config- if-Serial0) # start-chat yaho II. Check whether n ...

  • Huawei v200r001 - page 179

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-77 Quidwa y(config- if-Bri0)# i p address 100 .1.1.2 255. 255.255.0 Quidwa y(config- if-Bri0) # dialer-gr oup 1 Quidwa y(config- if-Bri0) # dialer m ap ip 100. 1.1.1 881015 2 IV. Check whether dialer-list i s co nfigured c orrectly DDR speci ...

  • Huawei v200r001 - page 180

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-78 VI. Check w hether sy nchronous/a sy nchronous serial port i s correctl y con figured as async hronous mode, a nd whe ther M odem is co nfigu red The s ynchronous /as ynchronous ser ial port m us t be c onf ig ured fir st in to as ynchro ...

  • Huawei v200r001 - page 181

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-79 Quidwa y(config- if-Serial 0)# physic al-layer async Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial 0)# dialer rot ary-grou p 0 The c onf igurati on c om m and under Dia ler Profile c o nf igur at io n is d ia ler p ool a ...

  • Huawei v200r001 - page 182

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-80 1) Hardware z W hether modem is connected c orrectl y. z W hether modem is initial ized cor rectl y, whether it is set as non-aut omatic answer. Refer to Mo dem s ection of this manua l for deta ils. z W hether the telepho ne line is conn ...

  • Huawei v200r001 - page 183

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-81 DDR A link is co nnec ti ng by this dia ler map , wait in g this lin k DDR Enqueu e this pac ket DDR queue is full discar d the packet DDR try to fi nd routing t o 10 0.1.1.2 on in te rf ace Serial0 DDR it is an in teresting p a cket DDR ...

  • Huawei v200r001 - page 184

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 1 DDR Config u ration 1-82 z Add in the rem ote router , the dialer map c orresponding to local router network layer ad dress. z Remove all the dia ler m aps in the rem ote configurat ion, and use dial str ing instead. DDR: link ne go tiatio n Down on inte rfac e * ...

  • Huawei v200r001 - page 185

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-1 Chapter 2 Configuration of Modem Ma nagement 2.1 Modem M anagement Fu nctions P rov ided by VRP1.4 Modem is a net work equi pment in ex tensive use. Sat isfactor y managem ent and cont rol of modem are im portant functions ...

  • Huawei v200r001 - page 186

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-2 Here: z send-str ing stands f or send ing charac ter string z receive- string sta nds for receivin g charact er str ing z send-str ing and receive-st ring usually app ear in p airs, and t he script m ust begin with sending ...

  • Huawei v200r001 - page 187

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-3 Table DC-2-2 List of script escape characters Escape characters Description c No additional return cha racter is sent when s ending cha racter string, th e location is at the end of send-string as other posi tions are inv ...

  • Huawei v200r001 - page 188

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-4 For spec ific f ormat of script, please ref er to Mo dem sc ript s y n tax. 2.3.4 Execut ing Modem Script Manua lly The s tart-chat com mand can be us ed, when nec essar y , to execute the spec ified Modem s cript, in or d ...

  • Huawei v200r001 - page 189

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-5 Table DC-2-7 Configure modem answer mode Operation Comm and MODEM is in autom atic answer mode modem-autoan swer MODEM is I nnon-aut omatic answe r mode no mod em-autoanswer By defaul t, modem is in non-autom atic ans wer ...

  • Huawei v200r001 - page 190

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-6 Exam ple 3: Conf igure modem initiali zation param eter Correctl y initiali ze modem configuration is an im portant s tep to co nnect m odem correc tly . The f ollowing is a brief introduc tion to th e com m on A T initial ...

  • Huawei v200r001 - page 191

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-7 II. Netw orking diagram Modem PC PSTN Modem Quidway Router Connectio n availabl e from all asynchronous interface Figure DC-2-2 Networking diagram of remote configuration using modem and through asynchronous interface III. ...

  • Huawei v200r001 - page 192

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 2 Configurati on of M odem Managem ent 2-8 Quidwa y(config- if-Serial 0)# modem Quidwa y(config- if-Serial0) # start-chat di al 2.4.5 Interactiv el y Connect Cisco Router Through Modem I. Netwo rking requ irements The Quid way ro uter should be int erconnec ted wit ...

  • Huawei v200r001 - page 193

    HUAWEI ® VRP User Manual – Confi guration Guide Volume 3 11 – VoIP Config uration (VC) ...

  • Huawei v200r001 - page 194

    User Manual - Configuration G uide (Volum e 3) Versatile R outing Platfor m Table of Co ntents i Table of Conte nts Chapter 1 VoIP Configurat ion .................................................................................................. ... 1-1 1.1 VoIP O verview .............................................................................. ...

  • Huawei v200r001 - page 195

    User Manual - Configuration G uide (Volum e 3) Versatile R outing Platfor m Table of Co ntents ii Chapter 3 E1 Voi ce Configuration .............................................................................................. 3-1 3.1 Overvie w of E1 Vo ice Conf iguration ............................................................................. ...

  • Huawei v200r001 - page 196

    User Manual - Configuration G uide (Volum e 3) Versatile R outing Platfor m Table of Co ntents iii 5.2.4 Conf igure the Max. Connect ion Num ber of T CP Header Com pressions .............. 5-3 5.2.5 Conf igure the C isco-com patible RTP head er com pression ................................... 5-3 5.2.6 Conf igure the d eleting of ud p_chk field fro ...

  • Huawei v200r001 - page 197

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-1 Chapter 1 VoIP Confi guration 1.1 VoIP Ov erview V o IP is the abbr eviation of V oice over IP . W hat we of ten called IP ph one is a t ypical applicat ion of the V oIP . The appl ication of V oIP in r outer m akes it possib le that the voi ...

  • Huawei v200r001 - page 198

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-2 1.1.1 VoIP Prin ciple I. Basic com position Telep hone Telephone IP n etw or k IP v oic e ga teway IP v oic e ga teway PSTN PSTN Gat eKeeper Figure VC-1-1 B asic composition of the VoIP system For the pla in voice ser vice, all th e functio ...

  • Huawei v200r001 - page 199

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-3 feedback , the appl ication s ystem can adapt t o different network environm ent. T he feedback on the qualit y of transm ission is a lso hel pful f or the fau lt location and diagnosis . H.323 Protoc ol stack Physical Layer Link Lay er Net ...

  • Huawei v200r001 - page 200

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-4 pack et switch ing can ide ntify , t herefor e; the k ey fac tor of router conf iguration lies in t he mapping of the pho ne num bers and the IP ad dresses . The ports that s upport the voice f unction in t he Quid way series routers include ...

  • Huawei v200r001 - page 201

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-5 The router can also s upport s ome s pecial servic e functio ns pro vided by the SPC switc h, such as: ---Do not disturb After s etting the “ Do not dis turb “ ser vice, no m atter if it is idl e, the subsc riber pho ne set will rejec t ...

  • Huawei v200r001 - page 202

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-6 ---Line group access Set li ne group access , you can set m ultiple ph ysical lines as one ph one num ber , in th is case if ther e is an incom ing call, it will a utom atical ly selec t the idle line for the repl y to reduce th e config ura ...

  • Huawei v200r001 - page 203

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-7 I. POTS di al-peer c onfigur at ion POT S is the abbr eviat ion of the Plain Old T elepho ne Ser vice, which ref ers to or dinar y telepho ne service. T he POTS dial- peer conf igurat ion m eans to esta blish relations hip between t he ph y ...

  • Huawei v200r001 - page 204

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-8     Note: The configuration commands here are addressed to the router, and the “Incoming” and “ Outgoing” are also defined in respect of router. Therefore, the POTS dial-peer uses the destination-pattern to define the pho ...

  • Huawei v200r001 - page 205

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-9 Table VC-1-4 Configuring the dial terminator Operat ions Commands Configure the dial terminat or dial-peer termin ator character Delete the di al terminator no dial-peer terminato r By default, we do not conf igure the dial ter m inator. 1.2 ...

  • Huawei v200r001 - page 206

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-10 Table VC-1-6 Configuring voice-port Operat ions Commands Configure voi ce physical port voice-port port-number Set the busy tone det ection type fo r the port area { north-am erica | custom | europe } Restore the po rt detection bus y tone ...

  • Huawei v200r001 - page 207

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-11 The def ault value of the c onfigurat ion comm and timing interdigit (t im e interval between t he DTMF s ignals) is 120 ms . The default va lue of the conf iguration com mand timing w ink-duration (wi nk tim e delay inter va l) is 500 m s ...

  • Huawei v200r001 - page 208

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-12 Table VC-1-8 Configuring the recovery method of voice board Operat ions Commands Enable WATCHDOG voip ena ble-w a tchdog Disable WAT CHDOG voip dis able- watc hdog By defaul t, WA T CHDOG is enabled. 1.3 VoIP Monitorin g and M aintenance Pl ...

  • Huawei v200r001 - page 209

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-13 KHT: Dia l succ es sfully , match POTS dial- pe er: 0 KHT: Dia l succ es sfully , match VoIP dial- pe er: 0 KHT: Dia l succ es sfully , NOT match di al- pee r: 0 KHT: Sen d IPAl er ting packe t to RCV: 0 KHT: Sen d IPCo nn ect packet to RCV ...

  • Huawei v200r001 - page 210

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-14 } The abov e inform ation indic ates that the call control bloc k 1 ser ves as outgoin g call, the state of eac h modul e is connecti on estab lished, t he call s tate is in call pr ocess, th e calling number is 1 1 1 and the c alled num be ...

  • Huawei v200r001 - page 211

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-15 5) Displa y the voic e port in form ation ! Exec ute this c omm and for a voice por t in cal ling progres s. Quidwa y# show vo ice-port 0 Voice- port 0 typ e FXS POTS , Lin e state is opene d channe l stat us is CH_TALKI NG coding proto co ...

  • Huawei v200r001 - page 212

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-16 SendI ppDataRi ghtTim es = 607188 Send IppDat aWrong Times = 0 RecvCo decm Da taByte s = 182 15640 Rec vIpp Da taByte s = 272116 0 The abov e inform ation indic ates the inf orm ation as follows : z times of right and wrong connec tion es t ...

  • Huawei v200r001 - page 213

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-17 III. C onfigur ation pr ocedures 1) Router_Be ijing conf iguration : Quidw ay# conf ig ! Conf igure V oIP d ial-peer . Quidwa y(config)# dial-p eer voice 4 voip ! Conf igure the cal led number , the dot is wildcard c haracter . Quidwa y(con ...

  • Huawei v200r001 - page 214

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-18 1.4.2 Configuring Router FXO and E&M Trunk Ports for Interconnection I. Netwo rking requ irements Ther e is a loc al teleph one network establis hed b y PBX in Be ijing, Sh enzhen and Shanghai r espec tively , it is requir ed that the t ...

  • Huawei v200r001 - page 215

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-19 III. C onfigur ation pr ocedures 1) Router_Be ijing conf iguration : ! Conf igure the V oI P dial-peer to Shenzhen. Quidwa y(config)# dial-p eer voice 0755 vo ip Quidwa y(config-p eer-voip 775)# destinat ion-patt ern 0755 .... Quidwa y(conf ...

  • Huawei v200r001 - page 216

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-20 Qduiwa y(config-p eer-voip 10)# dial-pe er voice 7 pots Quidwa y(config-peer-pots7)# des tination-patt ern 0755.... Quidwa y(config-p eer-pots7)# por t 6 ! E&M port s etting. Quidwa y(config-p eer-pots7)# voice-p ort 6 Quidwa y(config- ...

  • Huawei v200r001 - page 217

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-21 Quidwa y(config-p eer-pots5)# por t 0 2) Router_Sh enzhen conf igurati on Quidw ay# conf ig Quidwa y(config)# dial-p eer voice 10 voip Quidwa y(config-peer-voip 10)# destination-p attern 010.... Quidwa y(config-p eer-voip 10# session t arge ...

  • Huawei v200r001 - page 218

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 1 VoIP Configura tion 1-22 Figure VC-1-8 Interconnecting mode of the voice router and the voice gateway III. Co nfigura tion desc ription In the network ing diagram, Router_1 and R outer_2 ar e routers with voice functi on. In configur ation, the session targe t shou ...

  • Huawei v200r001 - page 219

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-1 Chapter 2 IP Fax Configuration 2.1 Ov er view to IP Fax Traditional faxes are sent and recei ved over PST N. T oday fax serv ices are wide ly used due to its advan tages , s uch as m any k inds of transm iss ive inf orm ation, fas t speed ...

  • Huawei v200r001 - page 220

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-2 IP telephone work s after V oIP is configured . Gener ally speak ing, faxes can no w be sent and recei ved b y using the default c onfigur ation of IP Fax onl y after a facsim ile machine is c onnected. T he procedures of conf iguring IP F ...

  • Huawei v200r001 - page 221

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-3 If it is set to be the valu es exc ept for “dis able” and “v oice”, th e fax r ate shall be set to be the corres ponding va lues. The r ate set here is not spec ified r ate but the hig hest allowa ble rate. W hen the setting is voi ...

  • Huawei v200r001 - page 222

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-4 received “ 1” is less than t he preset thresh old val ue, then the cur rent rate tra in is success ful, o therwi se, it is n ot succe ssful. Please p erform the follo wing configur ation i n dial pe er configur ation m ode. Table VC-2- ...

  • Huawei v200r001 - page 223

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-5 By default, the n umber f or sending two k inds of r edundanc y pack et is 0.The redundanc y packet num ber for sending lo w-speed dat a ranges fr om 0 to 5, and the redundanc y pack et number for sending high- speed d ata ranges f rom 0 t ...

  • Huawei v200r001 - page 224

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-6 Table VC-2-9 Monitoring and maintenance of IP Fax Operation Comm and Open all of the debuggi ng informati on switches of ipf ax debug i pf ax all Open the debuggin g information switc h of function api of ipfax de bug ipf ax api Open the d ...

  • Huawei v200r001 - page 225

    User Manual - C onfiguration Guide (Volume 3) Versatile R outing Platfor m Chapter 2 IP Fax C onfiguration 2-7 Quidwa y(config-p eer-voip 1)# dial- peer vo ice 2 pots Quidwa y(config-p eer-pots2)# des tinatio n 0101002 Quidwa y(config-p eer-pots2)# por t 2 The param eter s ettings for the r outer in Shenzhe n is as fol lows: Quidwa y(config)# dial- ...

  • Huawei v200r001 - page 226

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-1 Chapter 3 E1 Voice Co n f ig u ration 3.1 Ov er view of E 1 Voice Co nfigurat ion 3.1.1 Function of E1 Voi ce E1 voice r efers to the implem entation of VoIP function o ver E1 lin e, so as to pr ovide voice tr ansm ission m ode compat ...

  • Huawei v200r001 - page 227

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-2 II. Interface divided into TSs logic ailly & TS 16 not as special cha n nel W hen used as cE1 in terface, all t he other 31 T Ss exc ept TS0 can be divi ded into severa l groups, with eac h group of TSs used as one interf ace (cha ...

  • Huawei v200r001 - page 228

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-3 number , the router will rec eive the com plete dial number of the s ubscr iber . In t his case, the router adopts t wo-stage di aling m ode and re leases prom pt tone to guide the subscr iber to inp ut other inform ation. IV. Integra ...

  • Huawei v200r001 - page 229

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-4 Table VC-3-1 Configuration Commands of POTS dial-peer Operation Comm and Enter POTS dial-pe er configu ration mode dial-peer vo ice number pots Delete POTS dial -peer no dial-peer voice numbe r Disable the tr uncating of the cal led n ...

  • Huawei v200r001 - page 230

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-5 Table VC-3-2 Configuration Commands of VoIP dial-peer Operation Comm ands Enter VoIP dial -peer configu ration mode dial-peer voice number voip Delete VoIP dial -peer n o dial-peer vo ice number Configure voi ce codec method co dec { ...

  • Huawei v200r001 - page 231

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-6 Table VC-3-3 Configuration Commands of E1 Interface Operation Comm and Enter E1 controll er interface configurati on controller e1 port Establish c hannel-group for the specifi ed TS c hannel- group channel-group-no timeslo ts timeslo ...

  • Huawei v200r001 - page 232

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-7 Table VC-3-4 Configuration Commands of E1 Voice Port Operation Comm and Enter voice po rt configuration m ode voice-po rt port-nun mber :ds0-gro up-number Enable comfort nois e setting comfort -noise Disable comfort noise setti ng no ...

  • Huawei v200r001 - page 233

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-8 Table VC-3-5 DS0 Configuration Commands of DS0 Group Operation Comm and Enter E1 controll er interface configurati on mode controller e1 port-number Create DS0 of certain type ds0-group group-number timeslo ts timeslots-list type { e& ...

  • Huawei v200r001 - page 234

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-9 Table VC-3-6 Configuration Commands of R2 Signaling Operation Comm and Enter R2 signal ing configu ration mode cas-cus tom ds0-gro up-number Configure the number of the numbe rs collected before the caller num ber or the c aller ident ...

  • Huawei v200r001 - page 235

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-10 3.2.7 Configuring t he Basic Param eters of ISDN PRI Interface If DSS1 subs c riber sig na ling of ISD N PRI i nterf ace is ad op ted bet ween the router and the switch, th e inte grated transm iss ion of vo ice and d ata is supporte ...

  • Huawei v200r001 - page 236

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-11 3.2.8 Configuring Voic e Port (ISDN PRI Interface) Before en tering voice port (ISDN PRI int erface) configuration m ode, first the ISD N PRI group nee ds to be c reated, s o that the s ystem will cre ate the voice por t cor respondi ...

  • Huawei v200r001 - page 237

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-12 Please us e cas- custom comm and in E1 contr oller interfac e conf iguratio n mode and perform other conf igurations in R2 sig naling c onfigur ation m ode. Table VC-3-9 Operation & Maintenance Commands for MFC Channels and TS s ...

  • Huawei v200r001 - page 238

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-13 Quidwa y# show vo ice-port 1:1 5 The vo ice po rt was pri this voice por t was not se t connec tion The voi ce port' s desc rition : echo canc el enable echo canc el coverag e 16 musi c thre sh old is -70 input g ain 0 output at ...

  • Huawei v200r001 - page 239

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-14 Recv_R2_ Aler t_ AP_ALE RTING : 0 Recv_R2_ Aler t_ ELSE : 0 Recv_R2_ Unkn ow : 0 } The pack ets above sh ow the interact ive inf ormation betwe en RCV m odule a nd R2 signali ng, including t he succes sful and faile d num ber of the ...

  • Huawei v200r001 - page 240

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-15 Table VC-3-11 debug Commands of E1 Voice Operation Comm and Enable the d ebugging information output b etween RCV module and base layer R2 module de bug rcv r2 Enable the d ebugging information output b etween VPP module and base lay ...

  • Huawei v200r001 - page 241

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-16 Quidwa y(config- if-E1-0)# ds 0-group 1 tim eslots 1-31 type r 2-digita l ! Set up the POT S dial-peer on FXS interf ace (tel ephone num ber 010-10 03) Quidwa y(config)# dial-p eer voice 10 03 pots ! Conf igure the dest ination patte ...

  • Huawei v200r001 - page 242

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-17 ! Conf igure V oIP p eer to cor respond with l ogical por t Quidwa y(config-p eer-voip 10)# sess ion target ip v4:1.1. 1.1 3.4.2 Router C onnected to PB X in ISDN PRI M ode I. Netwo rking requ irement The telephon es in Beijin g and ...

  • Huawei v200r001 - page 243

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-18 Quidwa y(config)# dial-p eer voice 0755 vo ip ! Conf igure the dest ination pattern of the V oIP dial- peer Quidwa y(config-p eer-voip 755)# destinat ion-patt ern 0755 .... ! Conf igure V oIP p eer to cor respond with l ogical por t ...

  • Huawei v200r001 - page 244

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-19 II. Netw oking d iagram WAN WAN 2.2.2. 2 Router_ Bei jing WAN 1.1.1. 1 010-1001 010-1002 PBX 0755-2002 PBX E1 Port0:1 Beij ing Shenz hen Router_ Shenzhen 0755-2001 010-1003 Port0 Port1:1 E1 Subscriber in Be iji ng dial s 163, and the ...

  • Huawei v200r001 - page 245

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-20 Quidwa y(config-p eer-pots1001)# incom ing call ed-number 163 ! Create V oIP dia l-peer Quidwa y(config)# dial-p eer voice 0755 vo ip ! Conf igure the dest ination pattern of V oIP dial-p eer Quidwa y(config-p eer-voip 755)# destinat ...

  • Huawei v200r001 - page 246

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapte r 3 E1 Voice Config uration 3-21 First perf or m voice conf iguration f ollowin g the conf iguration pr ocedure of Beiji ng-side router specifie d in secti on 3.4.2 step by step, and the n configur e DDR dial ing in the corresponding port of IS DN PRI interfac e. Pl ...

  • Huawei v200r001 - page 247

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 4 GK Client Co nfigurat ion 4-1 Chapter 4 GK Client Configuration 4.1 Ov er view of G K Client IP telephone us es Intern et as the medium to transmit voice inf ormation. I P telephone GateWay (GW for short) lies between Public Switch ed T elephone Ne twork (PST N) ...

  • Huawei v200r001 - page 248

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 4 GK Client Co nfigurat ion 4-2 interfac e. Only af ter one interf ace is spec ified as H.323 gat eway interf ace, can the function of CK Clien t be activat ed and ca n GK Clien t register to G K Serv er . Please p erform the follo wing configur ations in inte rfac ...

  • Huawei v200r001 - page 249

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 4 GK Client Co nfigurat ion 4-3 inform ation of GK server , such as the I P address and nam e, to find th e right G K Server device,. Please p erform the follo wing configur ations in inte rface c onfigurat ion m ode. Table VC-4-4 Configure the GK S erver Name and ...

  • Huawei v200r001 - page 250

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 4 GK Client Co nfigurat ion 4-4 Table VC-4-6 Configure GK Interworking Mode Operation Comm and Configure GK inter working mode h323-gateway voip support-mo de { cisco | huawei } Recover the defa ult value of GK i nterworking mod e no h323-gateway voip support -mode ...

  • Huawei v200r001 - page 251

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 4 GK Client Co nfigurat ion 4-5 Quidwa y(config-p eer-pots1001)# port 0 ! Create VO IP dial-peer Quidwa y(config)# dial-p eer voice 0755 vo ip Quidwa y(config-p eer-voip 755)# destinat ion-patt ern 0755 .... Quidwa y(config-p eer-voip 755)# sess ion target r as ! S ...

  • Huawei v200r001 - page 252

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 4 GK Client Co nfigurat ion 4-6 Quidwa y(config- if-Serial1) # h323-gatewa y voip tec h-prefix 1 # ! Conf igure GK int erwork ing mode Quidwa y(config- if-Serial1) # h323-gatewa y voip s upport-m ode huawei ! Activat e GK Clien t function Quidwa y(config)# gatewa y ...

  • Huawei v200r001 - page 253

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 5 IPHC Configurati on 5-1 Chapter 5 IPHC Configuration 5.1 Ov er view of IP HC IPHC (IP He ader Com press ion) is the m ethod to class ify and com press packet suc h as IP , T CP and UDP , acc ording to a s eries of header com press ion algorithm s s pecified in re ...

  • Huawei v200r001 - page 254

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 5 IPHC Configurati on 5-2 5.2 IPH C Conf iguratio n 5.2.1 Configuration Task List of IPHC The c onfiguration t ask s of IPHC include: z Enable /disable RT P header com pression z Configure the max imum connection num ber of RTP header com press ions z Configure the ...

  • Huawei v200r001 - page 255

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 5 IPHC Configurati on 5-3 Notice: Af ter the c onfigurat ion completes , pleas e perform one “s hutdown” and “no shutdown” operation t o take effec t the configurati on. 5.2.4 Configure t he Max. Connection N umber of TCP H eader Compressions The subsc ribe ...

  • Huawei v200r001 - page 256

    User Manual - C onfigurat ion Guide (V olume 3) Versatile R outing Platfor m Chapter 5 IPHC Configurati on 5-4 5.3 Monit oring and M aintena nce of IP HC Table VC-5-6 Monitoring and Maintenance of IPHC Operation Comm and Show the statis tics of TCP heade r compressi on sh ow ip tcp h eader-compr ession [ interface-type i nterface-numbe r ] Clear th ...

  • Huawei v200r001 - page 257

    How Are We Doing Let us share your c omm ents with respec t to the c ontents, f orm ats and wording of this manual. Your feedback can be of great va lue in help ing us impr ove our docum ent. Please use a cop y of these two pag es for your comm ents, and f ax to: +86-755-6540035 Docum entation Deve lopment De partm ent. 1. Please rate the ef fec ti ...

  • Huawei v200r001 - page 258

    4. Feel f ree to write any comm ents belo w or on an attached she et. 5. It is highl y appreciate d for an y specific mistak es y ou ha ve found (th is page m ay be se nt to us separate ly). Mistake Suggested Correctio n Page & Line No. If we m ay contact you concer ning your comm ents, please c omplete th e follo wing: Name:______ ______ _____ ...

Manufacturer Huawei Category Network Router

Documents that we receive from a manufacturer of a Huawei v200r001 can be divided into several groups. They are, among others:
- Huawei technical drawings
- v200r001 manuals
- Huawei product data sheets
- information booklets
- or energy labels Huawei v200r001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Huawei v200r001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Huawei v200r001, service manual, brief instructions and user manuals Huawei v200r001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Huawei v200r001.

Similar manuals

A complete manual for the device Huawei v200r001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Huawei v200r001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Huawei v200r001.

A complete Huawei manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Huawei v200r001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Huawei v200r001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Huawei v200r001, that we can find in the current document
3. Tips how to use the basic functions of the device Huawei v200r001 - which should help us in our first steps of using Huawei v200r001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Huawei v200r001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Huawei v200r001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Huawei v200r001?

Use the form below

If you did not solve your problem by using a manual Huawei v200r001, ask a question using the form below. If a user had a similar problem with Huawei v200r001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)