English dropdown-ico

Manual Giant P200A-3100

16 pages 0.14 mb
Download

Go to site of 16

Summary
  • Giant P200A-3100 - page 1

    Contents: Installation Instructions: page 2 Pump Specifications: pages 3-9 Exploded View: page 1 0 Parts List / Kits: page 1 1 Torque Specifications: page 1 1 Repair Instructions: pages 12-13 Pump mounting selection Guide: page 13 Trouble Shooting Guide Recommened Spare Parts List: page 1 4 Dimensions: page 15 Warranty Information: back page Triple ...

  • Giant P200A-3100 - page 2

    2 INST ALLA TION INSTR UCTIONS 4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connec- tions, and other system areas. The use of a dampener with Giant Industries, Inc. pumps is optional, although recommended by Giant Industries, Inc. to further reduce system pulsa- tion. Dampeners can also reduce the severity of ...

  • Giant P200A-3100 - page 3

    3 Specifications Model P217A-3100/5100 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. U.S. (Metric) 1750 RPM + Ratings ............................................................ 1.8 GPM @ 2000 PSI ...... (6.8 LPM @ 137 bar) 3450 RPM + Ratings .............. ...

  • Giant P200A-3100 - page 4

    4 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. Specifications Model P218A-3100/5100 U.S. (Metric) V olume ........................................................... 3.4 GPM ................... (12.5 LPM) Discharge Pressure ................................. ...

  • Giant P200A-3100 - page 5

    5 Specifications Model P219A-3100/5100 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. PUMP PULLEY MOTO R PULLEY RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI 7.75 5.25 1150 2.7 1.5 2.2 2.8 3.2 3.7 7.75 6.50 1450 3.5 1.9 2.9 3.6 4.1 4.8 7.75 7.25 1750 4. ...

  • Giant P200A-3100 - page 6

    6 Specifications Model P220A-3100/5100 Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above. PUMP PULLEY MOTO R PULLEY RPM GPM 800 PSI 1200 PSI 1500 PSI 1700 PSI 2000 PSI 7.75 5.25 1150 3.1 1.7 2.6 3.2 3.6 4.3 7.75 6.50 1450 3.9 2.2 3.2 4.0 4.6 5.4 7.75 7.75 1750 4. ...

  • Giant P200A-3100 - page 7

    7 NOTE: In order to drive the pump fr om the side opposite the pr esent shaft extension, simply remov e the valve casing fr om the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to rotate the seal case (item #20) as well, so that the weep holes are do wn a t the six o'c loc k position. Exchange the oil fill and ...

  • Giant P200A-3100 - page 8

    8 NOTE: In order to drive the pump fr om the side opposite the present shaft extension, simply remo ve the valve casing fr om the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to r otate the seal case (item #20) as well, so that the weep holes are do wn a t the six o'c loc k position. Exchange the oil fill and ...

  • Giant P200A-3100 - page 9

    9 NOTE: In order to drive the pump fr om the side opposite the present shaft extension, simply remov e the valve casing fr om the crankcase and rotate the pumps 180 degrees to the desired position. Be certain to r ota te the seal case (item #20) as well, so that the weep holes are do wn a t the six o'c loc k position. Exchange the oil f ill an ...

  • Giant P200A-3100 - page 10

    10 Exploded V iew - P200A-3100/5100 Series ...

  • Giant P200A-3100 - page 11

    11 ITEM PART NO. DESCRIPTION QTY. 1 08300 Crankcase 1 2 08301 Dipstick 1 3 08302 Crankcase Plug Cover 1 3A 07190-0100 D rain Plug & Gasket 1 4 08005 O-Ring 1 5 08185-0100 Oil Drain Plug with seal 1 6 07188-0100 Screw, 316 S.S. 4 6A 07223-0100 Spring Washer, 316 S.S. 4 7 08303 Bearing Cover I 2 8 08490 Sight Glass 1 9 08492 O-Ring 1 10 07225-010 ...

  • Giant P200A-3100 - page 12

    12 REP AIR INSTRUCTION - P200A-3100/5100 SERIES 1. W ith a 22mm socket wrench, remove the (3) discharge valve plugs and (3) inlet valve plugs (32) Inspect the o-ring (33) for wear and replace if dam- aged. 2. Using a needle nose pliers, remove the inlet and discharge valve assemblies (27-30) and o-ring (31). Inspect all parts for wear and replace a ...

  • Giant P200A-3100 - page 13

    13 Disassembly sequence of the back end of the P200A-3100/5100 series pump. 1) Before you begin, drain the oil from the crankcase. 2) Remove the crankcase cover (3) and o-ring (4) from the crankcase (1). T o remove the crankshaft (13), remove the bearing cover (7) and sight glass (8). Using a rubber mallet, remove the crankshaft axially through the ...

  • Giant P200A-3100 - page 14

    14 Preventative Maintenance Check-List & Recommended Spar e Parts List Check Daily W eekly 50hrs Every Every Every 500 hrs 1500 hrs 3000 hrs Oil Level/Quality X Oil Leaks X W ater Leaks X Belts, Pulley X Plumbing X Recommended Spare Parts Oil Change X X Seal Spare Parts (1 kit/pump) X (See page 11 for kit list) Oil Seal Kit (1 kit/pump) X (See ...

  • Giant P200A-3100 - page 15

    15 P200A-3100/5100 DIMENSIONS - INCHES (mm) ...

  • Giant P200A-3100 - page 16

    GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and car wash applications, the discharge manifolds will never fail, period. If they ever fail, we will replace them free of charge. Our othe ...

Manufacturer Giant Category Heat Pump

Documents that we receive from a manufacturer of a Giant P200A-3100 can be divided into several groups. They are, among others:
- Giant technical drawings
- P200A-3100 manuals
- Giant product data sheets
- information booklets
- or energy labels Giant P200A-3100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Giant P200A-3100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Giant P200A-3100, service manual, brief instructions and user manuals Giant P200A-3100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Giant P200A-3100.

Similar manuals

A complete manual for the device Giant P200A-3100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Giant P200A-3100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Giant P200A-3100.

A complete Giant manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Giant P200A-3100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Giant P200A-3100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Giant P200A-3100, that we can find in the current document
3. Tips how to use the basic functions of the device Giant P200A-3100 - which should help us in our first steps of using Giant P200A-3100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Giant P200A-3100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Giant P200A-3100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Giant P200A-3100?

Use the form below

If you did not solve your problem by using a manual Giant P200A-3100, ask a question using the form below. If a user had a similar problem with Giant P200A-3100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)