English dropdown-ico

Manual Panasonic KX-TG1712MEB

64 pages Not applicable
Download

Go to site of 64

Summary
  • Panasonic KX-TG1712MEB - page 1

    © Panasonic System Networks Co., Lt d. 201 1 Unauthorized copying and distribution is a viol ation of law . ORDER NO. K M41 108492CE T elephone Equ ipment Model No. KX-TG171 1MEB KX-TG1712MEB KX-TGA171MEB Digit al Cordless Phone B: Piano Blac k V ersi on (for Mex ico ) (Handset) KX-TGA171MEB KX-TG1711MEB (Base Unit) (Charger Unit) Model No Base Un ...

  • Panasonic KX-TG1712MEB - page 2

    2 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity shou ...

  • Panasonic KX-TG1712MEB - page 3

    3 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B T ABLE OF CONTENTS P AGE P AGE 1 Safety Pr ecautions ---------------------------------------- ------- 4 1.1. For Serv ice T echnicians --------------------------------- 4 2 W arning -------------------------------------- ------------------------ 4 2.1. Batte ry Caution------------------------------------ ...

  • Panasonic KX-TG1712MEB - page 4

    4 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 1 Safety Preca utions 1.1. For Serv ice T echnicians • R ep air servi ce shall be pr ovided in acc ordance with rep air technology information such as s ervice manua l so as to prevent fire s, injury or electric sho ck, which can be caus ed by imprope r repa ir work . 1. When repair s ervices are provi ...

  • Panasonic KX-TG1712MEB - page 5

    5 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 2.2.1. Suggested PbF Solde r There are sev eral types of PbF solder availabl e commercially . Whi le this produc t is manufactured using T in, Silver , and Copper (Sn+Ag+Cu), you can a lso use T in and Co pper (Sn+Cu) o r T in, Zinc, and Bis muth (Sn+Zn +Bi). Please ch eck the man ufacturer ’s specific ...

  • Panasonic KX-TG1712MEB - page 6

    6 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 3 S p ecifications Note: • D esign and spec ifications are s ubject t o change without n otice. Note for Service : • Operation range: Up to 300 m out doors, Up to 50 m indoo rs, depend ing on conditio n • Analog teleph one conne ction: T elepho ne Line St andard: DECT 6.0 (Digital Enhanced Cordless ...

  • Panasonic KX-TG1712MEB - page 7

    7 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 4 T echnic al Descri ptions 4.1. Block Diagram ( Base Unit) A B J 1 H o o k S w i t c h A u d i o A n a l o g F r o n t E n d D S P R F C P U X T A L 2 0 . 7 3 6 M H z A N T 1 A N T 2 B r i d g e R e c t D2 Q2/3 Q1 E E P R O M t o T e l _ L i n e t o A C A d a p t o r C O S I C X1 C O S I C I / F C h a r ...

  • Panasonic KX-TG1712MEB - page 8

    8 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 4.2. Circuit Operation (Base Unit) 4.2.1 . Outline Base Unit c onsists of the fol l owing ICs as sh own in Block D iagram (Base Uni t) (P .7). • D ECT BBIC ( B ase B and IC): IC3 (career module) - Handling al l the audi o, signal an d data process ing neede d in a D ECT base unit - C ontr oll ing th e D ...

  • Panasonic KX-TG1712MEB - page 9

    9 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 4.2.3. T elephone Line Interface <Function> • Bell signal detectio n • Clip signal detectio n • ON/OFF hook c ircuit • Aud io c irc uits Bell & Clip (: Calling Line Id entification Pre sent ation: Caller ID) signal de tection: In the st andby mode, Q 3 is ope n to cut t he DC loo p curr ...

  • Panasonic KX-TG1712MEB - page 10

    10 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 4.3. Block Diagram (Handset) E a r p i e s e ( S p e a k e r ) A n a l o g F r o n t E n d D S P R F C P U X T A L 2 0 . 7 3 6 M H z X101 E E P R O M ( I C 1 0 2 ) B A T T E R Y C O S I C C h a r g e + C h a r g e - R e g u l a t o r 3 . 3 V 5 4 45 44 35 36 C h a r g e c i r c u i t S C L K D A T A 48 47 ...

  • Panasonic KX-TG1712MEB - page 11

    11 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 4.4. Circuit Operation (Ha ndset) 4.4.1. Outline Handset consis ts of th e following ICs as shown in Block Diagram (Hands et) (P .10). • DECT BBIC ( B ase B and I C): IC103 - All data sig nals (form ing/anal yzing ACK or CMD signal ) - All interfaces (ex: Key , Detector Circuit, Charge, DC/DC Converte ...

  • Panasonic KX-TG1712MEB - page 12

    12 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 4.6. Signal Route (BASE UNIT) IC3 - H01P, H01N - R2 - C5 - Q1 - Q3 - D2 A SIGNAL ROUTE ROUTE IN OUT SIGNAL DTMF TONE TEL OUT (to Tel Line) CDL TX (to Tel Line) CDL RX (from Tel Line) (BASE UNIT) from HANDSET ANT1 - C41 D6 - D801 - C820 - IC3 - RXI, RXIX - IC3 - H01P, H01N - B ANT2 - C39 R2 - C5 - Q1 - Q3 ...

  • Panasonic KX-TG1712MEB - page 13

    13 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 5 Location of Co ntrols and Compo nent s Refer to th e Operating Instructions. Note: Y ou can do w nload a nd refer to the Operating Ins tructions (Instruct i on book ) on TSN Server . 6 I nst a llatio n Ins truc tion s Refer to th e Operating Instructions. Note: Y ou can do w nload a nd refer to the Op ...

  • Panasonic KX-TG1712MEB - page 14

    14 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 8 Ser vice Mo de 8.1. Engineering Mode 8.1.1. B ase Un it Note: (*1) Refer to For Servi ce Hint (P .13). 1). Register a Handset to a Base Unit. 6). Repeat from Step 4). 5). Press "YY"(Data) , then press { MENU / OK } key. D is new setting data 4). Press "XXXX"(Address) , then press { ...

  • Panasonic KX-TG1712MEB - page 15

    15 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B Frequenc y Used Items (Base Unit) Note: *: When y ou enter th e address, p lease refer to the table below . ex.) (*1) (*2) Desired Number (hex) Input Keys Desired Number ( hex) Input Keys 0 0 A Press and keep 1 1 1 B Press and keep 2 . . C Press and keep 3 . . D Press and keep 4 . . E Press and keep 5 9 ...

  • Panasonic KX-TG1712MEB - page 16

    16 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 8.1.2. Ha ndset Note: (*1) Refer to For Servi ce Hint (P .13). H/S key operation H/S LCD Important: Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit. 5). Repeat from Step 3). 2). Press "#003". A is Address D is data 3). Press "XXXX"(Addr ...

  • Panasonic KX-TG1712MEB - page 17

    17 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B Frequenc y Used Items (Handset) Note: *: When you enter the address , please refer to the table in No te: (P .14) of Engineering M ode . ex.) (*1) This model ha s already been se tting Max. (*2) Items (*2) Add res s Def aul t Dat a New Dat a Rem arks Sending level 01 31 07 (36 dB) 06 (30 dB) 05 (24 dB) ...

  • Panasonic KX-TG1712MEB - page 18

    18 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 9 T roub lesh ooting Guide 9.1. T r oubleshootin g Flowchart Flow Chart Cross Reference: Check Po wer (P .19) Bell Reception (P .23) Check Battery Charge (P .20) Check L ink (P .21) Check Ha ndset T ransmission (P .23) Check Handset Rec eption (P .23) Signal Route (P .12) Check Ca ller ID (P .23) Power O ...

  • Panasonic KX-TG1712MEB - page 19

    19 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 9.1.1. Chec k Power 9.1.1. 1. Base Uni t Is the AC Adaptor ins erted into AC outlet? (C heck AC Ad aptor’s spec ification .) Cross Referen ce Power Supply Circuit (P .8) 9.1.1.2. Handset Cross Referen ce Power Supply Circuit/Re set Circuit (P .1 1) Is input of IC2 (pin3) about 5.5V? Check F1 is not op ...

  • Panasonic KX-TG1712MEB - page 20

    20 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 9.1.2. Ch eck Batte ry Charge 9.1.2 .1. Base Unit Cross Reference: Power Supply Circui t (P .8) 9.1.2 .2. Handset Cross Reference: Check Po wer (P .19) Charge Circuit (P .1 1) 9.1.2.3. Char ger Unit Cross Reference: Power Supply Circui t (P .1 1) Check Power Supply Circuit of Base Unit. Check Handset. Pl ...

  • Panasonic KX-TG1712MEB - page 21

    21 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 9.1.3. Check Link 9.1.3. 1. Base Uni t Cross Referen ce: Power Supply Circuit (P .8) Check Poin t (Base Unit ) (P .24) Note: (*1) Refer to T roubleshooting by Symptom (Bas e Unit and Charge r Unit) (P .24). Check around Power Supply Circuit . Does Base Unit make link with Handset? (Correct working unit) ...

  • Panasonic KX-TG1712MEB - page 22

    22 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 9.1.3 .2. Handset Cross Reference Power Supply Circuit/Reset Circu it (P .1 1) Check Po int (Handset) (P .27) Note: (*1) Refer to T roubleshooting by Symptom (Ha ndset) (P .27). Check around Power Supply Circuit/Reset Circuit . Does Handset make link with Base Unit? (Correct working unit) Check around X1 ...

  • Panasonic KX-TG1712MEB - page 23

    23 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 9.1.4. Check H andset T ransmission Cross Referen ce: Signal Route (P .12) 9.1.5. Check H andset Re ception Cross Referen ce: How to Che ck the Handset Speak er or Receiver (P .43). Signal Route (P .12) 9.1.6. Chec k Caller ID Cross Referen ce: Signal Route ( P. 1 2 ) 9.1.7. Bell Rec eption 9.1.7.1. Han ...

  • Panasonic KX-TG1712MEB - page 24

    24 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 9.2. T r oubleshooting by Symptom (Base Unit an d Charger Unit) If your unit has below sympto ms, follow the inst ruction s in remedy c olumn. R emedies depend on whe ther you have DE CT test er (*1) or not. Note: (*1) A gen eral rep air is pos sible ev en if you don’t hav e the DECT t ester beca use i ...

  • Panasonic KX-TG1712MEB - page 25

    25 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B ( F )* DTMF Generator Check - 1. Conn ect J1 (T elephone Soc ket) to DTMF tester . 2. E xecute the command “hookoff” and “dt mf_up”. 3. Confirm that the high f requency (1477.06Hz) group is -6.0 ± 2 dBm. 4. E xecute the command “dtmf_low”. 5. Confirm that the low f requency (852.05Hz) g rou ...

  • Panasonic KX-TG1712MEB - page 26

    26 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 9.2.2. Ch eck Point ( Charger Un it) Note: After the measuring, su ck up the solder of TP . The conn ection of adjustment equ ipment are as shown in Adjus tment St andard (Charger Unit) (P .37). ( N )* Audio Check - 1. Link with Handset wh ich is connected to Line Simulator . 2. Set line voltage to 48V a ...

  • Panasonic KX-TG1712MEB - page 27

    27 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 9.3. T roubleshooting by Symptom (Handset) If your unit h as below symp toms, foll ow the instructi ons in reme dy column. Re medies de pend on w hether you have DEC T tester (*1) or not . Note: (*1) A gene ral rep air is poss ible even if y ou don’t ha ve the D ECT teste r because it is for c onfirmi ...

  • Panasonic KX-TG1712MEB - page 28

    28 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB ( F )* Battery M onitor Check & Adjustment (Important) - 1. Apply 2.3V ± 0.005V between BA T TERY (+) and BA TTERY (-) with DC power . 2. Execut e the comm and “deactmac” to stabilize the value. 3. Then, exec ute the command “readbatt”. The returned value is XX. 4. Confirm that XX is bet wee ...

  • Panasonic KX-TG1712MEB - page 29

    29 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B ( O ) Audio Check and Confirmation - 1. Link t o BASE which is connected to Line Simulator . 2. S et line voltage to 48V and line current to 40 mA. 3. Input -45dBm/ 1KHz to MIC and measure Line output level. 4. Confirm t hat the level is -6.0 ± 3dBm and that the distortion level is < 5% at TEL Line ...

  • Panasonic KX-TG1712MEB - page 30

    30 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 10 Disassembly an d Assembly Ins truction s 10.1. Disassembly I nstructions 10.1.1. Base Unit 2 screws Cabinet cover Remove the 2 screws to remove the cabinet cover. Remove the solders to remove the main P.C. board. Main P.C. board solders ԙ Insert a plastic card. (Ex. Used SIM card etc.) between the ca ...

  • Panasonic KX-TG1712MEB - page 31

    31 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 10.1.2. Handset Cabinet cover Cabinet cover Main P.C.board Screw Remove the 2 screws. Insert a plastic card. (Ex. Used SIM card etc.) between the cabinet body and the cabinet cover, then pull it along the gap to open the cabinet. Likewise, open the other side of the cabinet. Remove the cabinet cover by ...

  • Panasonic KX-TG1712MEB - page 32

    32 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 10.1.3. Charger Unit Ԙ Remove the screw to remove the cabinet cover. ԙ Remove the solders to remove the 2 charge terminals. Ԙ Screw ԙ Solders Main P.C. board 2 charge terminals ...

  • Panasonic KX-TG1712MEB - page 33

    33 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 10.2. How to Replace the Handset LCD Peel off the FFC (Flexible Flat Cable) from the LCD, in the direction of the arrow. Take care to ensure that the foil on the P.C. board is not damaged. Fit the heatseal of a new LCD. Rubber of Soldering Iron (Part No. PQZZ430PRB) Tip of Soldering Iron (Part No. PQZZ4 ...

  • Panasonic KX-TG1712MEB - page 34

    34 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 1 1 Measure ment s and Adjus tment s 1 1.1. The Setting Method of JIG (Base U nit) 11 . 1 . 1 . P r e p a r a t i o n 1 1.1.1.1. Equipment Required • D ECT tes ter: Roh de & Schwar z, CMD 6 0 is reco mmended . • Frequency coun ter: it must be pre cise to b e able to measure 1 Hz (precis ion; ±4p ...

  • Panasonic KX-TG1712MEB - page 35

    35 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 1 1.1.2.2. Batch file Setting Note: • “*****” varies depending on th e country . 1 1.1.2.3. Commands See the t able below fo r frequently used co mmands . Command name Function Example readid Read ID (RFPI) Type “readid”, and t he registered ID is read out. writeid Write ID (RFPI) T ype “ wr ...

  • Panasonic KX-TG1712MEB - page 36

    36 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 1 1.2. Adjustment St an dard (Base Uni t) When con necting the si mulator eq uipment f or checking , please refer to bel ow . 1 1 .2.1. Bottom View Note: ( A ) - ( O ) is r eferred to Check Poi nt ( Bas e U nit ) (P .24) YLW BLK TEL BRN RED GRY DC PUR TP3 L1T L1R DCP LINE_DC DCM P1.0 VDD Charge Charge+ R ...

  • Panasonic KX-TG1712MEB - page 37

    37 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 1 1.3. Adjustment St andard (Charg er Unit) When conn ecting th e simulator equipment for ch ecking, please re fer to below . 1 1.3.1. Bottom V iew Note: ( A ) is referred to Check Poin t (Charger Unit) (P .26) A PNLB1922Z 3.0A F1 PbF -IG Charge- Charge+ 12 /2 W Digital Volt Meter DC POWER DC 5.5 V (GND ...

  • Panasonic KX-TG1712MEB - page 38

    38 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 1 1.4. The Setting Method of JIG ( Handset) 11 . 4 . 1 . P r e p a r a t i o n 1 1.4.1.1. Equipment Required • D ECT tes ter: Roh de & Schwar z, CMD 6 0 is reco mmended . • Frequency coun ter: it must be pre cise to b e able to measure 1 Hz (precis ion; ± 4 ppm). Hewlett Packa rd, 53131A is reco ...

  • Panasonic KX-TG1712MEB - page 39

    39 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 1 1.4.2.2. Batch file Setting Note: • “*****” varies depending on th e country . 1 1.4.2.3. Commands See the t able below fo r frequently used co mmands . Command name Function Example rdeep Read the data of EEPROM T ype “rdeep 00 00 10”, and the data from address “00 00” to “10” is re ...

  • Panasonic KX-TG1712MEB - page 40

    40 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 1 1.5. Adjustment St andard (Handset) When con necting t he simul ator equip ment for chec king, pl ease refer to below . 1 1.5.1. Component V iew Note: ( A ) - ( O ) is r eferred to Che ck Point (Handset) (P .27) A PNLB1930Z PbF -LV KX-TGA161R Receiver BLUE /GRN YLW GND VBAT TXD RXD VDDDCDC2 BATTERY+ BA ...

  • Panasonic KX-TG1712MEB - page 41

    41 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 1 1.6. Things to Do af ter Replacin g IC Cautions: Since this page is common t o each c ountry , it may not appl y to som e model s in your c ountry . The co ntents below are the minimum adjustm ents r equired for ope ration. 1 1.6.1. Base Unit Before do ing the fo llowing ad justment, be su re to do PC ...

  • Panasonic KX-TG1712MEB - page 42

    42 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 1 1.7. RF S pecificati on 1 1 .7. 1. Base Uni t *: Refer to Chec k Point (Ba se Unit) (P .24) 1 1.7.2. Ha ndset **: Refer to C heck Point (Han dset) (P .27) Item V alue Refer to -. * TX Power More than 14 dBm ~ 26 dB m Check Point (Base Unit) (G ) Modulation 340 kHz/ div ~ 402 kHz/ div Check Point (Base ...

  • Panasonic KX-TG1712MEB - page 43

    43 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 1 1.8. How to Check the Handset Speak er or Receiver 1. Prepare the digita l voltme ter , and se t the sel ector knob to ohm m eter . 2. Put the probes at t he speaker termi nals as shown b elow . 1 1.9. Frequency T able (MHz) Ch. (hex) TX/RX Frequency (MHz ) Channel 0 0 0 1928.448 Channel 1 0 1 1926.72 ...

  • Panasonic KX-TG1712MEB - page 44

    44 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 12 Miscellaneous 12.1. How to Replace the Flat Package IC Even if you do not have th e special tools (for ex ample, a sp ot heater) to rem ove the Fla t IC, with some s older (large amount ), a solderin g iron and a cutt er knife, you ca n easily remov e the ICs t hat have more tha n 100 pin s. 12.1.1. P ...

  • Panasonic KX-TG1712MEB - page 45

    45 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 12.1.3. How to Inst all the IC 1. T emporarily fix the FL A T P ACKAGE I C, solder ing the two marked pins. *Check t he accura cy of the IC setting with the correspon ding soldering foil. 2. Apply flux to al l pins of the FLA T P ACKAGE IC. 3. Solder the pins, s liding t he solderi ng iron in the direc ...

  • Panasonic KX-TG1712MEB - page 46

    46 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 12.2. How to Replace the Shield Case 12.2.1. Prep aration • PbF (: Pb free) Sold er • So lder ing Iro n T ip T emperature o f 700 ° F ± 20 ° F (370 ° C ± 10 ° C) Not e: We rec o mmend a 30 to 40 Watt sol dering iron. An ex pert may be able to use a 60 to 80 W att iron w here some one with less ...

  • Panasonic KX-TG1712MEB - page 47

    47 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 12.2.4. How to Inst all the Shie ld Case Note: • If you don’ t have sp ecial too ls (ex. Hot air disordering t ool), cond uct the fo llowing operation s. • Shield case’ s No. : PNMC10 40Z 1. Put the shield c ase. 2. Solder the surroun dings. ...

  • Panasonic KX-TG1712MEB - page 48

    48 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 12.3. T erminal Guide of the ICs, T ransistors, Diodes and Ele ctrolytic Cap acitors 12.3.1. Base Unit 12.3.2. Handset C B E B1ABDM000001 B1ABCE000009 B0EDER000009 Anode Cathode B0DDCD000001 8 5 4 1 PNWITG1611EH PQVDRLZ20A Cathode Anode B1AAJC000010 B1ACGP000008 3 2 1 4 C0DBEYY00102 PNLP2245Z (Reverse Vi ...

  • Panasonic KX-TG1712MEB - page 49

    49 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 13 Schematic D iagra m 13.1. For Schematic Diagram 13.1.1. Base Unit (Schema t ic Dia gram (Ba se Unit) ) Notes: 1. DC volta ge measu rement s are t aken with vol tmeter from the ne gative v oltage line. 2. This schematic d iagram may be modified at any ti me with the devel opment of new tec hnology . 1 ...

  • Panasonic KX-TG1712MEB - page 50

    50 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 13.2. Schematic Diagram (Base Unit) KX-TG1711/1712ME SCHEMATIC DIAGRAM (Base Unit_Main) NC: No Components ! C110 NC C109 NC C105 NC C104 NC C817 0.9p C821 10p C823 10p C23 10p TXD R17 100k C22 2p C12 100n P1.0 GND1 RXD C C C C48 100n C VDDA 2.5Vdc C7 100n C C C C37 NC C42 10p C C C38 10p CL13 L1R C C +5. ...

  • Panasonic KX-TG1712MEB - page 51

    51 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 13.3. Schematic Diagram (Handset) KX-TGA171 SCHEMATIC DIAGRAM (Handset_Main) NC: No Components SIGN170 TALK 1 2 1 1 2 # 1 2 0 1 2 5 1 2 6 1 2 TP23 FLASH 1 2 TP22 3 1 2 2 1 2 CLEAR 1 2 VDDC C124 100n TP17 VDD DCDC2 C123 10p P1.0 SW1 POWER 1 2 C122 1P C126 100n C127 100n R121 100k C114 10p TP12 TP13 BZ1 1 ...

  • Panasonic KX-TG1712MEB - page 52

    52 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 13.4. Schematic Diagram (Char ger Unit) J1 2 1 G TP1 TP2 F1 R1 6.8 (2W) SCHEMATIC DIAGRAM (Charger Unit) ! ...

  • Panasonic KX-TG1712MEB - page 53

    53 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 14 Prin ted Circ uit Boa rd 14.1. Circuit Board (Base Unit) 14.1.1. Component View 1 1 1 3A 1 2 PNLB1929Z -LV PbF KX-TG16 KX-TG1711/1712 CIRCUIT BOARD (Base Unit_Main (Component View)) C60 C58 C104 C71 C73 C70 C5 C4 C8 C10 C14 C72 C16 C45 D1 D10 D7 C21 C26 C57 C107 C30 C31 C27 C56 C109 C108 C37 C39 SW1 ...

  • Panasonic KX-TG1712MEB - page 54

    54 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 14.1.2. Bottom V iew YLW BLK TEL BRN RED GRY DC PUR TP3 L1T L1R DCP LINE_DC DCM P1.0 VDD Charge Charge+ RXD TXD GND DC_IN TP4 KX-TG1711/1712 CIRCUIT BOARD (Base Unit_Main (Bottom View)) A GND TXD Charge + Charge - RXD ANT L1R L1T VDD +2.65V DC P1.0 CLK 10.368MHz Line DC 0V: ON-Hook +9.8V: Off-Hoo k for J ...

  • Panasonic KX-TG1712MEB - page 55

    55 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 14.2. Circuit Board (Handset) 14.2.1. Component View A KX-TGA171 CIRCUIT BOARD (Handset_Main (Component View)) PNLB1930Z PbF -LV KX-TGA161R Receiver BLUE /GRN YLW GND VBAT TXD RXD VDDDCDC2 BATTERY+ BATTERY- MIC+ MIC+ MIC- MIC- 1 1 4 P1.0 C101 C100 C117 cam12 C140 C143 C144 C148 C125 C152 C150 C151 C114 ...

  • Panasonic KX-TG1712MEB - page 56

    56 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 14.2.2. Bottom V iew # DN UP CID CLEAR REDIAL TALK PHONEBOOK SW1 MENU/OK PAUSE CN2 FLASH A MIC- MIC+ 0 8 7 4 1 56 23 9 KX-TGA171 CIRCUIT BOARD (Handset_Main (Bottom View)) ...

  • Panasonic KX-TG1712MEB - page 57

    57 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 14.3. Circuit Board (Charger Unit) 14.3.1. Component View 14.3.2. Bottom V iew R1 J1 CIRCUIT BOARD (Charger Unit (Component View)) A A PNLB1922Z 3.0A F1 PbF -IG CIRCUIT BOARD (Charger Unit (Bottom View)) ...

  • Panasonic KX-TG1712MEB - page 58

    58 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 15 Exploded V iew and Re placement Part s List 15.1. Cabinet and Electrical Par t s (Base Unit) A 7 1 4 6 5 PCB1 E1 2 3 Ref.No. Figure A 2.6 x 8mm ...

  • Panasonic KX-TG1712MEB - page 59

    59 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 15.2. Cabinet and Electrical Part s (Handset) Note: (*1) This cable is fixed by attac hing. Refer to How to Replace the Hands et LCD (P .33). (*2) The re chargeabl e Ni-MH b attery HHR -4MR T is available through s ales route of Panaso nic. (*3) Att a ch the spacer ( N o. 1 12) to the exac t locatio n d ...

  • Panasonic KX-TG1712MEB - page 60

    60 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 15.3. Cabinet and Electrical Part s (Charg er Unit) B 200 200-1 200-3 200-4 200-2 PCB200 Ref.No. Ǿ 2  8 mm B Figure ...

  • Panasonic KX-TG1712MEB - page 61

    61 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 15.4. Accessories P1, P2 (*1) Note: (*1) The illustration differs from the actual gift box. A2 A1 ...

  • Panasonic KX-TG1712MEB - page 62

    62 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 15.5. Replacement Part Li st 1. RTL (Retenti on Tim e Limite d) Note: The “R TL” marking ind icates that it s Ret ention T ime is Limited . When pro duction is di scontin ued, this item will continue to be available onl y for a specif ic period of time. This perio d of time dep ends on the ty pe of i ...

  • Panasonic KX-TG1712MEB - page 63

    63 KX-TG1711M E B/KX-TG171 2MEB/KX-TGA171ME B 15.5.2. Handset 15.5.2.1. C abinet and E lectrica l Part s 15.5.2.2. M ain P .C.Board Part s Note: (*1) Re confirm th e model No. written on the handse t’s na me plate w hen replac ing PCB100 . Because the mo del No. of the opti onal handset may dif fer from the in cluded hand set. (*2) Whe n replaci ...

  • Panasonic KX-TG1712MEB - page 64

    64 KX-TG1711ME B/KX-TG1712M EB/KX-TGA171 MEB 15.5.3. Charger Unit 15.5.3.1 . Cabinet and Ele ctrical Part s 15.5.3.2. M ain P .C.Board Par ts 15.5.4. Accessorie s Note: Y ou can do w nload a nd refer to the Operating Instructi ons (Instructio n book) on TSN Server . 15.5.5. Screws 15.5.6. Fixtures and T ools Note: (*1) See T he Setting Method o f J ...

Manufacturer Panasonic Category Dect

Documents that we receive from a manufacturer of a Panasonic KX-TG1712MEB can be divided into several groups. They are, among others:
- Panasonic technical drawings
- KX-TG1712MEB manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic KX-TG1712MEB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic KX-TG1712MEB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic KX-TG1712MEB, service manual, brief instructions and user manuals Panasonic KX-TG1712MEB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic KX-TG1712MEB.

Similar manuals

A complete manual for the device Panasonic KX-TG1712MEB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic KX-TG1712MEB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic KX-TG1712MEB.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic KX-TG1712MEB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic KX-TG1712MEB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic KX-TG1712MEB, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic KX-TG1712MEB - which should help us in our first steps of using Panasonic KX-TG1712MEB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic KX-TG1712MEB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic KX-TG1712MEB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic KX-TG1712MEB?

Use the form below

If you did not solve your problem by using a manual Panasonic KX-TG1712MEB, ask a question using the form below. If a user had a similar problem with Panasonic KX-TG1712MEB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (1)

Rogelio hernandez

Como blokear numeros no deseados en este modelo de telefono