English dropdown-ico

Manual TP-Link AC1900

143 pages 3.27 mb
Download

Go to site of 143

Summary
  • TP-Link AC1900 - page 1

    Archer C 9 AC1900 Wireless Dual Band Gigabit Router R EV1.0.0 191001 1 101 ...

  • TP-Link AC1900 - page 2

    COPYRIGH T & TR A DEM ARKS S pecif ications are subject to change without notice. is a registered trade mark of TP - LINK TECHNOLOGIES C O., L TD . Other br ands and produ ct names ar e trademarks or registered t rademar k s of their res pective hold ers. No part of the s pecificatio ns may be reprod uced in any for m or by any means or used to ...

  • TP-Link AC1900 - page 3

    FCC ST A TEMENT This equi pment has been tested and f ound to co mply with the limits fo r a Clas s B digit al device, pursuant t o part 15 of the FCC Rules. These l imits ar e designed to prov ide reasonable pr otection against har mful interfere nce in a resident ial insta llation. This equ ipment gener ates, uses and ca n radiate radi o frequenc ...

  • TP-Link AC1900 - page 4

    CE Mark W ar ning This is a class B pr oduct. In a domesti c environment, this product may caus e radio interferenc e, in which case the us er may be requ ired to ta ke adequate me asures. Nati onal Res trictions This device is inte nded for home and of fice use in all EU countri es (and other countr ies following the EU direct ive 1999/5/E C) with ...

  • TP-Link AC1900 - page 5

    Luxembourg None General authorizati on required for networ k and servic e supply (not f or spectrum) Russian F ederation N o info 5250 - 535 0 MHz Country Restriction Reason/ remark Bulgaria Not implemente d Planned Croatia Lice nse required Ita ly General auth orization req uired if use d outsi de own pre mis es Luxembourg None General authoriza t ...

  • TP-Link AC1900 - page 6

    Canad ian Com pliance S t atemen t This device c omplies with Industry Cana da license - exe mpt RSS st andard(s). O peration is subject to the follow ing two condit ions: (1) This device may not cause interferenc e, and (2) This device must accept any interferenc e, including interf erence that may cause und esired operation o f the device. Cet ap ...

  • TP-Link AC1900 - page 7

    頻電機需忍受合 法通信或工業、 科學以及醫療用電 波輻射性電機設 備之干擾。 減少電磁波影響 ，請妥適使用。 安全諮詢及注意事項 ●請使用原裝電 源供應器或只能 按照本產品注明的 電源類型使用本 產品。 ●清潔本產品之 前請先拔掉電源 線。請勿使用液體 ? ...

  • TP-Link AC1900 - page 8

    TP - LINK TECHNOLOGIES CO., L TD DECL ARA TION OF CO NFORMIT Y For the follow ing equipme nt: Product Des cription: A C1900 Wireles s Dual Band Gi gabit Router Model No.: A rcher C 9 Tradema rk: TP - L INK We declare under our own r esponsibility that the ab ove product s satisfy all the techn ical regulatio ns applicable t o the product w ithin th ...

  • TP-Link AC1900 - page 9

    CONTENTS Package C ontent s ..................................................................................................... 1 Chapt er 1. Introduction ......................................................................................... 2 1.1 Overv iew of the router ......................................................................... ...

  • TP-Link AC1900 - page 10

    5.4.5 W ireles s Advanced ......................................................................................... 45 5.4.6 W ireless St ati st ics ........................................................................................... 46 5.5 W irel ess 5G Hz ..................................................................................... ...

  • TP-Link AC1900 - page 11

    5.14.1 S tatic Ro uting List ........................................................................................... 91 5.14.2 System Routing T a ble ..................................................................................... 92 5.15 Ban dwidth Co ntrol .................................................................................. ...

  • TP-Link AC1900 - page 12

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Package Contents The follow ing items shou ld be found in your p ackage:  Archer C9 A C1900 W ireles s Dual Band Gigabit Router  DC Power Adapt er for Archer C9 AC1900 W ir eless Dual Band G igabit Router  Quick Inst allation Gui de  Resource CD for Archer C9 AC1900 W ir eless Dual ...

  • TP-Link AC1900 - page 13

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 1. Introduction 1.1 Over vi ew of t he r out e r The Archer C9 AC1900 W ire less Dual Band Gig abit Router integrates 4- port S witch, Firewall, N AT - router and Wireless AP . Powe red by 3x 3 MIMO techno logy , the AC1900 W irel ess D ual Ba nd Gigabit Rout er delivers excepti onal r ...

  • TP-Link AC1900 - page 14

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1.3 Main Feat ures  Complies wit h IEEE 802. 1 1 ac .  One 10/10 0 /1000M A uto - Negotiat ion RJ45 Internet port, four 10/10 0 /10 00 M Au to - N ego tia tion RJ 45 Ethernet port s, supportin g Auto MDI/MD IX.  Pro vi des a USB 3.0 por t and a USB 2.0 port supporting file sh aring an ...

  • TP-Link AC1900 - page 15

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1.4 Panel La yout 1.4.1 The Front Pa nel The router ’s LE Ds are located on the fr ont panel (V iew from l eft to rig ht) . Na me S ta t u s Indication (Power) Fl ashi ng The router is booting or upgrad i ng. On T he router h as booted. Off Power is off. (2.4G W ireless) On 2.4G wireless is ...

  • TP-Link AC1900 - page 16

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router ( USB 1) Fl ashi ng The router is identi fying the device co nnected to the USB 2 .0 port. On The device is ide ntified success fully . Off N o device is c onnected to the USB 2 .0 port. ( USB 2) Fl ashi ng The router is identi fying the dev ice connected to t he USB 3.0 port. On The device is ...

  • TP-Link AC1900 - page 17

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router button to quic kly estab lish a connection bet ween the router and client devices a nd automati cally configure w ireless secur ity for your w ireless network. Pressing t his button for more than 5 seconds en ables the Reset funct ion. W ith t he router powered on, press and hold the Reset /WP ...

  • TP-Link AC1900 - page 18

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 2. Connecting the router 2.1 System Requirement s  Broadban d Internet A cces s Service (DSL/ Cable/Ether net)  One DSL/C able Modem that has an RJ45 conn ector (which is n ot necessary if the router is connected d irectly to the Ether net)  PCs with a w orking Ethernet Adapte ...

  • TP-Link AC1900 - page 19

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 2-1 Hardware Ins tallation Figure 2-2 USB Ins ta llatio n  Not e: If you want to use the rout er to share files or print er , plug the USB stor age device to the USB port or connect the printer to th e router with a m atching cable. - 8 - ...

  • TP-Link AC1900 - page 20

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 3. Quick Setup 1. Set up the T CP/IP Proto col in " Obt ain an IP address aut omatically " mode on y our PC. If you need inst ructions as t o how to do this, pleas e refer to Appendix B: Configuring the P C . 2. Open a web - browser (su ch as Microsof t Internet Explorer , Mo ...

  • TP-Link AC1900 - page 21

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 4. T hen WAN Conne ction Ty pe page will appear as shown below . Sel ect your connect ion type if you know what it is or c lick Aut o Detect button ; th en follow the instr uction s t o continue.  Not e: 1) It's likely that you wil l skip S tep 3 and jump t o S tep 4 in so me situation ...

  • TP-Link AC1900 - page 22

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router St atic IP Figure 3-6 W AN Connection Type  IP A ddress - Enter t he IP address int o this fie ld.  Subnet Mask - Enter t he subnet mas k into this field. It is usually 255.2 55.255.0.  Default Gateway - Enter the gat eway IP addre ss into t his f ield .  Primary DNS - En t er the ...

  • TP-Link AC1900 - page 23

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router L2TP Figure 3-8 W AN Connection Type  VPN Serv er IP/ D omain N a me - Enter the serv er IP address/na me provided by your ISP.  Use rn ame - Enter the usernam e provided by your ISP. Th is field is case - sensi ti ve.  Pa sswo rd - Enter the Passwo rd provided by y our ISP. Th is fie ...

  • TP-Link AC1900 - page 24

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router PP TP Figure 3-9 W AN Connection Type  VPN Server IP/Do ma in Name - Enter the ser ver IP addres s/name prov ided by your I SP.  User n am e - Enter the usernam e provided by y our ISP. Th is field is ca se - sens it ive .  Pa sswo rd - Enter the Passwo rd provided by y our ISP. Th is ...

  • TP-Link AC1900 - page 25

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Wir eless 2.4GHz/5G Hz - Disp lays whether the w ireless functi on is enabled or not .  Network Nam e (SSI D) - Also called the SSID (Serv ice Set Identificat ion). Enter a value of up to 32 charac ters. The s ame name must be assign ed to all wirel ess devices in y our networ k . This ...

  • TP-Link AC1900 - page 26

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 4. Basic 4.1 Network Map Network Map pr ovides a router - centered dashboard that lets y ou see the sta tus of your Internet connection and network at a glance. Y ou can cli ck any of the six sections of the dashboard to view the d etai l information. All the info rmation is read - o n ...

  • TP-Link AC1900 - page 27

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4-2 I nternet 1. If your ISP provides the D HCP service, ple ase choose Dy na mic IP typ e , and the router will automati cally get IP para meters from y our ISP. Yo u can see the page as shown below . Figure 4-3 Dyn am ic IP  IP Address - A ssigned dy namically by your I SP .  Su ...

  • TP-Link AC1900 - page 28

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Primary/Secondary DNS - If your I SP gives you one or t wo DNS addresses, select Use These DNS Serv ers a nd enter the pr imary and secondary addresses int o the correct fields. Otherw ise, the DNS server s will be assigned dy namically from your ISP .  Not e: If you find error w hen yo ...

  • TP-Link AC1900 - page 29

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4-5 PPPoE  User Name/ P assword - Enter the User Name and Passw ord provided by your ISP . These fields are cas e - se nsi ti ve. Click the Conne ct button to c onnect immediat ely . Click the Disconnect button to dis connect i mmediately . Click the Save button to sav e your setting ...

  • TP-Link AC1900 - page 30

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5. If your ISP prov ides PPTP connection, please select PPTP/Russia PP TP option. And yo u should ent er the following p arameters ( Figure 5-8). Figure 4-7 PPTP /Rus sia PPTP  VPN Serv er IP/Domain Name - Enter the I P addre ss or domain na me of your VPN serv er .  User Name/P assword ...

  • TP-Link AC1900 - page 31

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 4.3 W ireless Choosing menu “ Basic → Wirel ess ”, you can config ure the basic settings f or the wireless networ k including 2. 4GHz and 5GHz . Figure 4-8 W irel ess Se tti ng  Wir eless 2.4GH z/5GHz - Select ON to enable your w ireless 2.4GHz/5G Hz network , and select OFF to disab ...

  • TP-Link AC1900 - page 32

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4-9 F ile Sharing  Device S etting - C li ck th e Sc an button to d isplay the info rmat ion of the USB storage d evice connected t o the rout er. Click the Saf ely Remov e button to remove the U SB storage device safely f rom th e router. Select t he Ac t i ve checkbox, and the n th ...

  • TP-Link AC1900 - page 33

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router ii. Ent er ftp://192.16 8.0.1:21 in the dialog box and c lick the OK button. 3) FTP (Remot e): This meth od is d isa bl ed by default. I f you select this ch eck box, r emote users can access the USB drive t hrough FTP ov er the Internet . This feature support s both download ing and uploading ...

  • TP-Link AC1900 - page 34

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Allo w Guest Network A ccess - If this checkbo x is selected, gue sts are allow ed to access the shar ing file.  Enabl e Aut hentication - If this checkbox is selecte d, then the file shar ing is need authent ication .  Enable W rite A ccess - If this checkbox i s selected , then the ...

  • TP-Link AC1900 - page 35

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 4- 12 Guest Network  All ow G uest s T o S ee E ach O ther - If ON is sele cted, anyone who co nnect s to the g uest n etwor k can a cce ss each other .  Allo w Guest s T o Access My Local Network - If ON is selected , any one who connect s to t he guest netw ork has acc ess to yo ...

  • TP-Link AC1900 - page 36

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Chapter 5. Advanced 5.1 Sta t u s Choose menu “ A d va nc ed → Sta t us ”, you can see the c urrent stat us informatio n about the router . Figure 5-1 S tatus - 25 - ...

  • TP-Link AC1900 - page 37

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.2 Net w or k Figure 5-2 t he Network menu There are thre e submenus under the Network men u as shown in Figure 5-2 : WA N , MAC Clone , and L AN . Click any o f them, and you wi ll be ab le to configure the corre spondi ng function. 5.2.1 W AN Choose menu “ Advan ced → Ne tw o rk → WA ...

  • TP-Link AC1900 - page 38

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  MTU S ize - The normal MTU (Maximum Tr ansmission Un it) value for most Ethernet networks is 1500 Byt es. It is not recommen ded that you chan ge the default M TU Si ze unless required by y our ISP .  Use Thes e DNS Server s - If your I SP giv es you one or two DNS addr esses, se lect U ...

  • TP-Link AC1900 - page 39

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  MTU S ize - The normal MTU (Max imum T ransmiss ion Unit) value for most Ethernet networ ks is 1500 Byt es. It is not recommen ded that you chan ge the defa ult MT U S ize unless require d by y our ISP .  Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted - deci ...

  • TP-Link AC1900 - page 40

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  St atic IP - Y ou can chec k this radio button t o use S tat ic IP as the secondar y connection to connect to the local area net work provided by ISP .  Conne ct on Demand - In this mode, the Interne t co nnection can b e terminate d automatica ll y after a s pecified inact ivity period ...

  • TP-Link AC1900 - page 41

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5-6 P PPoE Advanc ed Settings  MTU Siz e - The defaul t MTU size is “ 1480” by tes, which is usual ly fine . It is not recomme nded that you c hange the default MT U Size unless req uired by your ISP .  Service N ame/A C Name - The service na me and AC (Access Concent rator) n ...

  • TP-Link AC1900 - page 42

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5-7 WAN - L2 T P/R ussia L2TP  VPN Serv er IP/Domain Nam e - Enter the IP add ress or domain n ame of the VPN ser ver provided by your ISP .  User Name/P assword - Enter the User Name and Passw ord provided by your ISP . These fields are cas e - sen si tive .  Dynamic IP/ Stati ...

  • TP-Link AC1900 - page 43

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Connect A utomatically - Connect aut omatically after the rout er is discon nected. T o use this option, chec k the radio bu tton.  Conne ct M anu ally - Y ou can configure t he ro uter to make it c onn ect o r di sconn ec t man ual l y . After a specified per iod of inact ivity ( M ax ...

  • TP-Link AC1900 - page 44

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  VPN Serv er IP/Domain Nam e - Enter the IP add ress or domain n ame of the VPN ser ver provided by your ISP .  User Name/P assword - Enter the User Name and Passw ord provided by your ISP . These fields are cas e - sen si tive .  Dynamic IP/ Static IP - Select St atic IP if IP addres ...

  • TP-Link AC1900 - page 45

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Static IP - Connect ions which use st atic IP address assignment . The router cann ot detect PPTP/L2T P connections w ith your ISP. If your ISP uses one of thes e protocols, then you must c onfigure your connection manua lly. 5.2.2 M AC Clone Choose menu “ A dvanced → Ne tw or k → MA ...

  • TP-Link AC1900 - page 46

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 10 LAN  M AC Ad d r e s s - The physical ad dress of the ro uter , as seen from th e LAN. The v alue can't be change d.  IP A ddress - Enter t he IP addres s of your router or reset it in dotte d - decimal not ation (factory def ault: 192.168.0 .1).  Subnet Mas k - An a ...

  • TP-Link AC1900 - page 47

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.4 W ireless 2. 4G Hz Figure 5- 12 W irele ss m enu There are six submenus under the Wireless menu , shown in Figure 5- 12 : Wireless Setti ngs , WPS , Wirel ess Security , Wireless M AC Filter ing , Wir eless Adv anced and Wireless St atistics . Click any of them, and y ou will be able to co ...

  • TP-Link AC1900 - page 48

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router wireless features of the r outer in so me parts of th e world. If your country or region is not listed, ple ase contact your local governme nt agency for ass istance.  Mode - Select the desired mode.  11 n only - Sele ct if y ou are using 802.11 n w ireless clients.  11bg mi xed - Sel ...

  • TP-Link AC1900 - page 49

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  MAC A ddress (to be bri dged) - The M AC addr ess ( BSSID ) of the AP your r outer is going to conne ct to as a client. You can als o use the Survey function to select t he MA C address ( BS SID ) t o join.  Su rvey - Click this button, you can search the AP s that run in all channel s. ...

  • TP-Link AC1900 - page 50

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Use this metho d if your client dev ice has a WP S button. Ste p 1: Press the WPS /Reset but ton on the back p anel of the router . Ste p 2: Press and hold the WPS button of the client dev ice. The W PS LED flashes for t wo minutes duri ng the Wi - Fi Prot ected Setup pr ocess. Ste p 3: W he n ...

  • TP-Link AC1900 - page 51

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 17 W irele ss S ecur ity  Disable Se curity - I f you do not want to use wireles s security, check this rad io button. But it’s strongly r ecommended t o choose one of the fo llowing modes to en able securit y.  W PA / W PA2 -P ersonal - It’s the W PA/ W PA2 authent ication ...

  • TP-Link AC1900 - page 52

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 18 W PA / W PA 2 – Person al  Wir eless Pass word - Y ou can enter ASCII charact ers betwee n 8 and 63 characters or 8 to 64 Hexadecim al characters. The def aul t pa ssw ord i s t he s ame with t he default P IN code, which is lab eled on the router or can be fou nd in Figure 5 ...

  • TP-Link AC1900 - page 53

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Grou p Key Up date Peri od - Speci fy the group key update interval in sec onds. The value shoul d be 30 or abov e. Enter 0 to disa ble the update.  WEP - It is based on the IEEE 802.11 st andard. If you chec k this radio butt on, you will find a notice in red a s show n in Figure 5- 20 ...

  • TP-Link AC1900 - page 54

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.4.4 Wireless MAC Filtering Choose menu “ A dvanced → Wireless 2.4GHz → W ireless MAC Filter ing ” , you can control t he wireless acc ess by config uring the Wireless M AC Filterin g function, shown in Figure 5- 21 . Figure 5- 21 W irele ss MAC Filt ering T o f ilter wireless users b ...

  • TP-Link AC1900 - page 55

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 3. Sel ect Ena bled or Disabl ed for thi s entry on the S tat us drop - down list . 4. Click the S ave button to s ave this entry . T o modify or delete an e xisti ng entry : 1. Click the Modify i n the entry y ou want to modify . If you want to delete the entry , click the Delete . 2. Modify ...

  • TP-Link AC1900 - page 56

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.4.5 Wireless A dvanced Choose menu “ Advan ced → Wireless 2 .4GHz → W ireless Advanced ”, you can configure t he advanced s ettings of your w ireless networ k . Figure 5- 23 W irele ss A dva nc ed  Transmit Power - Here you can sp ecify the tran smit power of router . You c an sel ...

  • TP-Link AC1900 - page 57

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router broadcast and multicast messa ges. When the router has buffered broadca st or multicast messages for associate d clients, it sends the ne xt DTIM with a DTIM Interv al value. You can spe ci fy the value between 1 - 25 5 Beacon Interv als. The default value is 1, which indicat es the DTIM Int e ...

  • TP-Link AC1900 - page 58

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router If the numbers of con nected wireless stations go bey ond one page, click the Next button to go t o the next pag e and click the Pr evious b utton to retur n the previous page.  Not e: This page w ill be refreshed aut omatically every 5 seconds. 5.5 Wireless 5GHz Figure 5- 25 W irele ss m e ...

  • TP-Link AC1900 - page 59

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router TP - LINK _ XXXX _5G . This v alue is case - sensitiv e. For example, TE ST is NOT t he same as test .  Region - The geographic r egion where the router is being use d. Thi s fi eld sp eci fi es th e region where t he wireless function of the r outer can be used. It might be ille gal to use ...

  • TP-Link AC1900 - page 60

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  MAC A ddress (to be bridge d) - The MAC address ( BSSI D ) of the AP your router is going to conn ect to as a client . You can also use th e Survey function to select the MAC address ( BS SID ) t o join.  Sur vey - Click this but ton, you can search t he AP s that run in al l channel s. ...

  • TP-Link AC1900 - page 61

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router If the wireless adapter support s Wi - Fi Protected Setup ( W PS), you can e stablish a w ireless connectio n between wireless adapt er and router using e ither Push Button Con figuration (PB C) method or PI N m ethod.  Not e: To build a success ful connection by W PS , you should a lso do ...

  • TP-Link AC1900 - page 62

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.5.3 Wireless S ecurity Choose menu “ A dvanced → Wirel ess 5GHz → Wirel ess Security ” , you can configure the secur ity settings of y our wireless net work. There are five w ireless se curity modes sup ported by t he router : W PA - Pers onal , W PA2 - Pe rs onal , W PA - Enterpr is ...

  • TP-Link AC1900 - page 63

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Not e: If you chec k the W PA / W PA 2 - Personal radio b utton and choose TKIP encry ption, you will find a notice in r ed as shown in F igure 5- 31 . Figure 5- 31 W PA / W PA 2 – Person al  Wir eless Passw ord - You can enter AS CII charact ers between 8 and 63 cha racters or 8 to 6 ...

  • TP-Link AC1900 - page 64

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Radius Serv er IP - Enter the IP addr ess of t he Radius serv er.  Radius Por t - Enter the port number of the Radi us server.  Radius Pa sswor d - Enter the passwor d for the Radi us server.  Grou p Key Up date Peri od - Speci fy the group key update interval in sec onds. The val ...

  • TP-Link AC1900 - page 65

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Not e: If you do not set the key , the wirele ss security funct ion is still disable d even if you hav e selected S hared Key as Authentication T ype. Be sure to clic k the Save button to sav e your sett ings on this page. 5.5.4 Wireless MAC Filtering Choose menu “ Advan ced → Wireless ...

  • TP-Link AC1900 - page 66

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1. Enter the appr opriate MAC Addr ess into the M AC Ad d r e s s field. The format of the M AC Address is XX - XX - XX -XX- XX - X X (X is any hexadeci mal digit). For exa mple: 00 - 0A - EB - B0 - 00 - 0B. 2. Give a si mple descri ption for the wirel ess stati on in the Descripti on f ield. ...

  • TP-Link AC1900 - page 67

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.5.5 Wireless A dvanced Choose menu “ Advan ced → Wireless → Wirel ess Advanced ” , you can configure the adv anced settings of y our wireless net work. Figure 5- 36 W irele ss A dva nc ed  Transmit Power - Here you can sp ecify the tran smit power of router . You can sel e ct High ...

  • TP-Link AC1900 - page 68

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router messages for associate d clients, it sends the n ext DTIM with a DTIM Int erval value. Yo u c an specify the v alue between 1 - 255 Bea con Intervals. The default value is 1, which ind icates the DTIM Int erval is the same a s Beacon Inter val.  Enable W MM - WMM function can guarantee t he ...

  • TP-Link AC1900 - page 69

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Not e: This page w ill be refreshe d automatically every 5 seconds. 5.6 Guest Netw ork Choose menu “ A dvanced → Guest Net work ”, y ou can configure t he Guest Network W ireless Setti ngs on the p age as shown in Figure 5- 38 . Fi gure 5- 38 Guest Network Wireless Setti ngs - 58 - ...

  • TP-Link AC1900 - page 70

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Acc ess And Bandwi dt h Control  Allow Gu est s to See Each Other - If t his checkbox is selected , anyone who connect s to the guest networ k can communi cate with each othe r .  Al low Gue st s T o Access My Local Networ k - If this checkbox is selected , anyone who connect s to th ...

  • TP-Link AC1900 - page 71

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.7 DHCP Figure 5- 39 The DHCP menu There are t hree submenu s under the DH CP menu , shown in Figure 5- 39 : DHCP Settings , DHCP Clien t s Lis t and A ddress Reservation . C l ick any of the m, and you w ill be able to con figure the correspond ing function s. 5.7.1 DHCP S ettings Choose men ...

  • TP-Link AC1900 - page 72

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router the user will be a utomatic ally assigned a new dy namic IP addr ess. The range of the time is 1 ~ 2880 minutes . The default v alue is 120 minute s.  Default Gateway - ( Optional.) It is suggested to input the IP address of the Ethernet por t of the router . The default v alue is 192. 168. ...

  • TP-Link AC1900 - page 73

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router accesses the DHCP se r ver . Reserved IP addresses sho uld be assigne d to the server s that require per manent IP settings. Figure 5- 42 A ddress Rese rvation  MAC A ddress - Th e MAC address o f the PC for which y ou want to reserv e an IP address.  Reserv ed IP A ddress - The IP addr ...

  • TP-Link AC1900 - page 74

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.8 USB Setti ngs Figure 5- 44 The USB Sett ings menu There are three submenus under the U SB Settings menu (shown in Figure 5- 44 ): Device Settings , F ile Sharing , and Print Server . Cl ick any of them, and you will be able to con fi gure t he correspond ing function s. 5.8.1 Device Set ti ...

  • TP-Link AC1900 - page 75

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 46 File Shar ing  Shari ng A ccount  Use Login A ccount - Select this rad io button, and t he sharing accoun t is the sam e w i th the login accou nt.  Use Follo wing Account - Select thi s radio butt on, then y ou have to specify the new username an d passw ord in the Use r ...

  • TP-Link AC1900 - page 76

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 2) FTP : This method is disa bled by default. If you select this chec k box and click the S a ve butto n , the LAN users ca n access t he USB driv e through FT P . T o access the US B drive for exampl e from a Window s computer: i. Sele ct St a rt > Run . ii. E nter ftp://192.168.0.1 :21 in ...

  • TP-Link AC1900 - page 77

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Allo w Guest Network A ccess - If this checkbo x is selected, guests are a llowed to access the shar ing file.  E nabl e Aut hentication - If this checkbox is selected, then t he file sharing is need authent ication .  Enable W rite A ccess - If this checkbox i s selected , then the ...

  • TP-Link AC1900 - page 78

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 49 NA T Boost 5.10 Forw arding Figure 5- 50 The Forwardi ng menu There are f our su bmenus under the Forw arding m enu: Virtual Servers , Port T rig gering , DMZ and UPnP . Click any of th em, and you will be ab le to configure t he correspon ding function. 5.10.1 Virtual Serv ers Ch ...

  • TP-Link AC1900 - page 79

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Service P ort - The number s of External Service Port s. Y ou can ent er a service port or a range of serv ice ports ( the format is XXX – YYY ; XXX is the S tart port and YY Y is the En d port).  Internal Po rt - The Internal Service Port number of the PC runnin g the service applica ...

  • TP-Link AC1900 - page 80

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Not e: It is possi ble that you hav e a computer or s erver that has more tha n one type of availab le service. If so, select another serv ice, and type t he same IP address for that comput er or serv er . To modi fy or de lete an exi sting ent ry: 1. Find the des ired entry in the table. ...

  • TP-Link AC1900 - page 81

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 3. Select t he protocol used for T rigger Port fro m the T rigger Prot ocol drop - d own list, either TCP , UDP , o r Al l . 4. Select t he protocol used for Inco ming Port s from the Incomi ng Protoc ol drop - down l ist, either TCP or UDP , or All. 5. Sel ect Ena ble d in Sta tu s fie ld . 6 ...

  • TP-Link AC1900 - page 82

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Clic k the Enable All button to make al l entries enabl ed. Clic k the Disable Al l button to make all entries d isabled. Clic k the Delete A l l button to delete a ll entries Once the router is c onfigur ed, the o perati on is as fol lows: 1. A l ocal ho s t makes an o utgoing connec tion to ...

  • TP-Link AC1900 - page 83

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.10.4 UPnP Choose men u “ Advan ced → For warding → UPnP ”, and t hen you can v iew the infor mation about UPnP in the screen show n in Fi gure 5- 56 . The Universal Plug and Play (UPnP) featur e allows the devices, s uch as Inter net computers, to access the loc al host resources or ...

  • TP-Link AC1900 - page 84

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.11 Security Figure 5- 57 The Security m enu There are four su bmenus under the Security menu: Basic Securi ty , Advanced Sec urity , Local Manage ment and Rem ote Mana gement . Click any of t hem, and you will be able to con figure the correspond ing function s. 5.11.1 Basic S ecurity Choose ...

  • TP-Link AC1900 - page 85

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  VPN - VPN Passt hrough must be enabled i f you want to allow VPN tunnels u sing VPN protocols t o pass through t he router .  PPTP Pa ssthrou gh - Point - to - Point T unneling Prot ocol (PPT P) allows th e Poi nt - to - Point Proto col (PPP) to be t unneled throu gh an IP networ k . To ...

  • TP-Link AC1900 - page 86

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 59 A dvance d Security  Packets Stati stics Interval (5~60) - The def ault v alue is 10. Select a value between 5 and 60 second s from the dro p - down list. The Packets S t atistics Interv al value indi cates the time section of the p ackets st atistics. The result of the stat is ...

  • TP-Link AC1900 - page 87

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  En able T CP - S YN - FLOOD Attack Filt ering - Enable or Disable th e TCP - SYN - FL O OD Attack Filter ing.  TCP - S YN - FLOO D Packets Thresh old (5~3600) - The default v alue is 50. Ent er a value between 5 ~ 3600. W hen the cur rent TCP - SYN - FLOOD Pack ets numbers is beyond t h ...

  • TP-Link AC1900 - page 88

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router use the password t o browse the built - i n web pages to perform Ad ministrator tasks while all the others will be b locked. After clic k the Ad d button, y our PC's MAC Addr ess will be place d in the list above. Click the Save button to sav e your settings.  Not e: If your PC is bloc ...

  • TP-Link AC1900 - page 89

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.12 Parental Control Choose men u “ Ad vanced → Parent al Contr ol ”, and then you ca n configure th e parent al cont rol in the screen as sh own in Figure 5- 62 . The Parent al Control functi on can be used to control the internet act ivities of the chil d, limit the chil d to access c ...

  • TP-Link AC1900 - page 90

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 63 A dd or Modi fy Parenta l Control Entry 2. Enter the M AC address of the PC (e.g. 00 - 11 - 22 - 33 - 44 - AA) you’d like to control in the M AC Addr e ss of Chi ld PC fiel d, or you can choose the M AC address from the A ll A ddress in Current LAN drop - do wn list. 3. Give a d ...

  • TP-Link AC1900 - page 91

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1. Clic k “ Parental Control ” menu on the left to ent er the Parental Contro l Settings page. Che ck Enable and e nter the MAC addr ess 00 - 11 - 22 - 33 - 44 - BB in the MAC Address of Parent al PC field. 2. Clic k “ A dvanced → A ccess Control → Sche dule ” on the l eft to enter ...

  • TP-Link AC1900 - page 92

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.13.1 Rule Choose menu “ A dvanced → A ccess Control → Rule ”, and then y ou can view and set Acces s Control rul es in the screen as shown in Figure 5- 65 . Figure 5- 65 A ccess Cont rol Rule Mana gement  Enab le Internet A ccess Control - Select the chec kbox to enable the I nter ...

  • TP-Link AC1900 - page 93

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Mo ve - You can chang e the entry’s order as de sired. Enter in t he first box the I D number of the entry you want to mo ve and in the se cond box anoth er ID number, a nd then cli ck the Mo ve button to chan ge the entries ’ order. Click the Next button to go t o the next page. Click ...

  • TP-Link AC1900 - page 94

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 67 Quic k Setup – Creat e an Access T arget Entry  Target Descr iption - In this field, create a descr iption for th e target. N ote that this descriptio n should be uniq ue (e.g. Target_1) .  Mode - Here are two options, IP Address an d Domain Name. You can choos e either of ...

  • TP-Link AC1900 - page 95

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 68 Quic k Setup – C reat e an Advanced Sch edule Entry  Schedule D escription - In this field, creat e a descri ption for the sched ule. Note that this descriptio n should be uniq ue (e.g. Schedu le_1).  Day - Choose Select Day s and select the cert ain day (day s), or choose ...

  • TP-Link AC1900 - page 96

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Target - In this filed, selec t a target from the dr op - down list f or the rule.  Sched ule - In t his field, select a sc hedule from the drop - down list for the rule.  Status - In this field, there are t wo options, Enabl ed or Disable d . S elect Enabled so that the rule w ill t ...

  • TP-Link AC1900 - page 97

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 4. Add a new target w ith the Target Description is Target_1 and Domain Name is www. google.com , and c lick Next . 5. Add a new sc hedule with the Sc hedule Descript ion is Schedu le_1, Day is Sat and Sun, Start Time is 1800 an d Stop Time is 20 00, and click Next . 6. A dd a new rule with th ...

  • TP-Link AC1900 - page 98

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 72 A dd or Modi fy a Host Entry 2) If you select M AC Addres s, the screen is shown as Figure 5- 73 .  In Host Description field, create a unique d escription for t he host , e.g. Host_1 .  In MA C Address fie ld, enter the MAC a ddress. Figure 5- 73 A dd or Modi fy a Host Entr ...

  • TP-Link AC1900 - page 99

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.13.3 Target Choose men u “ Advan ced → A ccess Control → T arget ”, and then y ou can vi ew and set a T arget list in th e screen as sh own in Fi gure 5- 74 . The t arget list is necessary for the Access Cont rol Rule. Figure 5- 74 T arget Settings  Target Description - D isplays ...

  • TP-Link AC1900 - page 100

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 76 A dd or Modi fy an Access T arget Entr y 1) In Target De scription field, create a unique descr i ption for the t arget , e.g. Tar get_1. 2) In Domain Name field, e nter the do main name, eit her the full na me or the key words ( e.g. google) in the blan k. Any domain name w ith k ...

  • TP-Link AC1900 - page 101

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 77 Schedu le Settings  Schedule De scription - D isplays the descr iption of the schedu le and this descri ption is unique.  D a y - D isplay s the day(s) in a week.  Time - D isplay s the time period in a day .  Mod ify - Here you can ed it or delete an exist ing schedu ...

  • TP-Link AC1900 - page 102

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router For example : If you desire to restrict t he internet activities o f host with MAC addres s 00 - 11 - 22 - 33 - 44 - AA to access ww w.google.c om onl y from 18:00 to 20: 00 on Sat urday and Sun day , you should first f ollow the setting s below: 1. Clic k Add New ... button shown in Figure 5- ...

  • TP-Link AC1900 - page 103

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router T o add sta tic ro uting en tries: 1. Clic k A dd New… shown i n Figure 5- 80 , you will see the following scr een. Figure 5- 81 A dd or Modi fy a S tatic Route Entry 2. Enter the f ollowing dat a:  Destinati on Network - The Destinat ion Network is the addr ess of the networ k or host th ...

  • TP-Link AC1900 - page 104

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 82 Syst em Routing T able  Destinati on Network - The Destination Netw ork is the address of the network or host t o whic h the stat ic route is assig ned.  Subne t M ask - The Subnet M ask determines whi ch portion of an IP ad dress is the networ k portion, an d which portion ...

  • TP-Link AC1900 - page 105

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 84 Bandw idth Co ntrol Settings  Enable Bandwidt h Control - Sel ect th is che ck box so that the B andwidth Contro l setting s can take effe ct .  Line Ty pe - S elec t the right ty pe for you networ k connection. I f you don’t kno w how to choose , please ask your ISP for t ...

  • TP-Link AC1900 - page 106

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router T o add/mo dify a Ban dwid th Cont rol rule, follow the step s belo w. 1. Clic k A dd New… shown i n Figure 5- 85 , you will see a new screen show n in Figure 5- 86 . 2. Enter the in formation l ike the screen shown b elow . Figure 5- 86 Bandw i dth Co ntrol Rule Settin gs 3. Click the S ave ...

  • TP-Link AC1900 - page 107

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 88 Bind ing Setting  M AC Ad d r e s s - Th e MAC address o f the controlled computer in the L AN.  IP A ddress - The assi gned IP address of the c ontrol led computer in the LA N.  Bind - Chec k this option to enab le ARP binding for a specific dev ice.  Mod ify - To mod ...

  • TP-Link AC1900 - page 108

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1. Click the Find butt on in Figure 5- 88 . 2. Enter the MAC Addres s or IP Address . 3. Click the Find butt on in Figure 5- 90 . Figure 5- 90 Find I P & MAC B inding Entry Click the Enable All butt o n to make all entr ies enabl ed. Click the Delet e All but ton to delete all entries. 5.1 ...

  • TP-Link AC1900 - page 109

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Not e: An item cou ld not be load ed to the IP & MA C Binding list i f the IP address o f the item ha s been loaded be fore. Error war ning will pro mpt as well. Li kewise, "Load All" only loa ds the items w ithout interferen ce to the IP & MAC Binding list. 5.17 Dynamic ...

  • TP-Link AC1900 - page 110

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Connecti on Status - The s tatus of the DDNS serv ice connect ion is displayed here. Clic k Logout to log out of t he DDNS service.  Not e: If you want to login again with another acc ount after a successful l ogin, please cl ick the Logout button, t hen input your ne w username and pa sswo ...

  • TP-Link AC1900 - page 111

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 94 No - ip .com DDNS Setti ngs To set up for D DNS, follow t hese ins tructions: 1. Enter the U ser Name for your DDNS acco unt. 2. Enter the P assword for your DDNS acc ount. 3. Enter the Domain Name you receiv ed from dyna mic DNS service prov ider . 4. Click the Login butt on to l ...

  • TP-Link AC1900 - page 112

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.18.1 IPv6 Status Figure 5- 96 IPv 6 S tatus The IPv6 Stat us page displays the r outer 's current IPv6 st atus and configurati on. All information is read - only .  W AN • Con necti on Type - T he IPv6 connect ion way for W AN • IPv6 A ddress - Th e WAN IPv6 address • IPv6 Defa ...

  • TP-Link AC1900 - page 113

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.18.2 IPv 6 Setup Figure 5- 97 Enabl e/Disable IPv6  Enable IPv 6 - T ick the chec kbox to enable the IPv 6 function. It ’s enabled by default.  W AN Conne ction T ype - Choos e t he correct WA N connection t ype based on your ISP networ k topology . • DHCPv6 - Connections w hich us ...

  • TP-Link AC1900 - page 114

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 1) DHCPv6 Figure 5- 98 DHCPv6 - SLAA C Figure 5- 99 DHCPv6 – DHCPv6 Serv er  Get non - t emporary IPv6 address - Get a non - te mporary IPv6 address from t he ISP. - 103 - ...

  • TP-Link AC1900 - page 115

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Get IPv 6 prefix delegati on - Get a tem po rary I Pv6 address an d IPv6 prefi x from the IS P, the temporary IPv6 addre ss is set to the W AN p ort, an d the LAN port a dvertise I Pv6 address by RADVD or DHC Ps.  IPv6 A dd ress - The IPv6 addres s assigned by your ISP dynamically . Cli ...

  • TP-Link AC1900 - page 116

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 2) St atic IPv6 Figure 5- 100 Sta t i c IP v6 - SLAAC Figure 5- 101 Sta t i c I Pv6 – DHCPv 6 Server  IPv6 A dd ress - Enter the IPv6 address in dotted - de cimal notation prov ided by your ISP.  Default Gateway - Enter the de fault gateway in dotted - dec imal notation prov ided by y ...

  • TP-Link AC1900 - page 117

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  MTU S ize - The n orm al MTU (M axim um Tran smi ssi on U ni t) va lue for most Ethernet net works is 1500 By tes. For some ISPs, you may need to m odify the MTU. B ut this is r arely required, and should not be done unless y ou are sure it is neces sary for your I SP connection.  Prima ...

  • TP-Link AC1900 - page 118

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 103 PPPoE v6 – DHCPv 6 Server  User Name/P assword - Enter the User Name and Pas sword provi ded by your IS P. The se fields are cas e - sen si tive .  Get IPv 6 A ddress Way • Get n on - temporary IPv6 address - Get a non - temporar y IPv6 address by DHCPv6 from th e ISP. ...

  • TP-Link AC1900 - page 119

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router DHCPv6 addr ess will be leased. The t ime range is 1~691200 sec onds. The default v alue is 86400 secon ds.  L AN IPv 6 Address - Displays t he LAN IPv6 Addres s. 4) T unnel 6t o4 Figure 5- 104 T unnel 6to4 - SLAAC - 10 8 - ...

  • TP-Link AC1900 - page 120

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 105 Tu nnel 6to4 – DHCPv6 Serv er  Address / Subnet Mask/ Default Gateway - the IPv4 address/ subn et mask/ defau lt gateway assigned , in dotted - deci mal notat ion.  MTU S ize - The nor mal MTU (Maximu m Transmissi on Unit) value for most Et hernet networ k s is 1 48 0 Byt ...

  • TP-Link AC1900 - page 121

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router • Release Tim e - the lengt h of time a network user w ill be allowed to keep conne cting to the router wit h the current D HCPv6 Addres s. Enter the a mount of time (in sec onds) that t he DHCPv6 addr ess will be leased. The t ime range is 1~691200 second s. The default valu e is 86400 seco ...

  • TP-Link AC1900 - page 122

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 107 T ime s et tings  Ti me Zone - Select y our local time z one from this pull d own list.  Date - Ent er your local dat e in MM/DD/YY into the right blanks.  Tim e - Enter y our local time in HH/MM/SS into t he right blanks .  NTP Server I / NTP Server II - Enter the ad ...

  • TP-Link AC1900 - page 123

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router T o set time automat ically : 1. Select y our local time z on e. 2. Enter the ad dress or dom ain of the NTP Server I or NTP Server II . 3. Cli ck the G et GM T butto n to get system ti me from Internet if you have conne cted to the Internet. T o set Daylight Sav ing: 1. Chec k the box t o ena ...

  • TP-Link AC1900 - page 124

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 109 Diagnost ic T ools  Dia gnost ic T oo l - Check the radio b utton to select one diagnostic t oo.  Ping - T his dia gno sti c to ol t roubles hoots con nectivity , reachab ility , and name res olution to a given host or gateway .  T raceroute - This d iagnostic tool test ...

  • TP-Link AC1900 - page 125

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 0 Diagn ostic Result s  Not e: 1. Only one user can use the diag nostic tools at one t ime. 2. "Ping Count", "Ping Packet Size" a nd "Ping T imeout" ar e Ping Para meters, and " Trac eroute Max TTL" is T raceroute Para meter . 5.19.3 Firm ...

  • TP-Link AC1900 - page 126

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  Not e: 1) New fir mware versions are pos ted at www.tp - li nk .c om and can be down loaded for free. Th ere is no need to upgrade t he firm war e unless the new firmwar e has a new feature y ou want to use. Howev er, when ex periencing proble ms caused by the router r ather than th e conf ...

  • TP-Link AC1900 - page 127

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 3 Back up & Restore Con figuration  Click the Ba ckup button t o save all configur ation sett ings as a backup file in y our local computer .  T o upgr ade the router 's configurat ion, follow thes e instructions. • Click the Browse butto n to find the configur at ...

  • TP-Link AC1900 - page 128

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5.19.7 Pass word Choose menu “ Advan ced → System T ools → Pa sswo rd ”, and then you can change the factory default user name and pa ssword of the router in the next scr een as shown in Figure 5- 11 5 . Figure 5- 11 5 Passw ord It is strongly recommende d that you should chan ge the f ...

  • TP-Link AC1900 - page 129

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 6 Syste m Lo g  Auto Mail Feature - I ndicates whether aut o mail feature is en abled or not.  Mail S ettings - Se t the receiving and s ending mai lbox address, serv er address, v ali dation informati on as well as the timet able for Auto Ma il Feature, as show n in Figure ...

  • TP-Link AC1900 - page 130

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  N ote : Only when y ou select Aut henticat ion , do you hav e to enter the User N ame and Passwor d in the followin g fields. • User Name - Your m ail account name filled in the Fro m field. The part behind @ is excluded. • Pa sswo rd - Your mail acc ount passwor d. • Confi rm The Pa ...

  • TP-Link AC1900 - page 131

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure 5- 11 8 S tatisti cs  Current Statistics Sta tus - Enable or Disable. Th e default value i s disabled. To en able it, cl ick the Enabl e button. If it is disabled, the function of DoS pr otection in Sec urity set tings will be disabled.  Packets Stati stics Interv al （ 5- 60 ） ...

  • TP-Link AC1900 - page 132

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Statistics Ta ble: I P /M AC Ad d r e s s The IP and MAC addre ss are display ed with related st atistics. Total Packets The total number o f packets r eceived and t ransmitted by the router . B yte s The total number of bytes received and t ransmitted by the router . Current Packets The total ...

  • TP-Link AC1900 - page 133

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix A: F AQ 1. How do I configur e the r outer to a ccess Internet by ADSL users? 1) First, con figure the ADSL Modem configur ed in RFC1483 br idge mo del. 2) Connect t he Ethernet cab le f rom your ADSL Modem to t he Internet port on the router . The telephone c ord plugs into t he Line ...

  • TP-Link AC1900 - page 134

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 2. How do I configur e the r outer to a ccess Internet by Ethernet us ers? 1) Login to t he router , click the “Networ k” menu on the left of your br owser , and click "W AN" submenu. On the WA N page, select “Dyna mic IP” for " WAN Co nnection T ype", fi nish by cl ...

  • TP-Link AC1900 - page 135

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure A - 5 Add or Modify a V irtual serv er Entry  Not e: Your oppos ite side should call your WAN IP, whi ch is displayed o n the “Status” page. 4) How to enab le DMZ Host: Log in to t he router , click the “ For wardin g ” menu on the lef t of your brow ser , and click " DM ...

  • TP-Link AC1900 - page 136

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Figure A - 7 Basic Secur ity 4. I want t o build a W EB Serv er on the LA N , what s hould I do ? 1) Because th e WEB Serv er port 80 will inter fere with the W EB management por t 80 on the router , you must change t he WEB manage ment port numb er to avoid interfer ence. 2) T o change the W ...

  • TP-Link AC1900 - page 137

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 3) Log in to the rout er , c lick the “ Forwar ding ” menu o n the left of your browser , and clic k the " V irtual S ervers " submenu. O n the " Virtual Servers " p age, click A dd New… , then on the “ A dd or Modify a Virt ual Serve r ” page, enter “80” into ...

  • TP-Link AC1900 - page 138

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix B: Configuring the PC In this section, w e’ll introduce how to inst all and configur e the TCP/IP correctly in W indows XP . First make s ure your Ether net Adapter is working, refer to the adapter’s manu al if needed. 1. Install TCP/IP co mponent 1) On the W indows t askbar , cli ...

  • TP-Link AC1900 - page 139

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router 5) The followin g TCP/IP Properties window will di splay and t he IP A ddress t ab is open on this window by default. 6) Sel ect Obtai n an IP addr ess automati cally and Obt ain DNS s erver automat ically , as shown in the Fi gure below: Figure B -3 2. V erify the net work conn ection be twee ...

  • TP-Link AC1900 - page 140

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  If the resu lt displayed i s similar to Figur e B -5 , it mean s t he connection bet ween your PC and the router fa iled. Figure B-5 Failure resu lt of Ping command Please ch eck the conne ction followin g these step s: 1. Is the connect ion between your PC and the ro uter correct?  Not ...

  • TP-Link AC1900 - page 141

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix C: S pecifications General S tandards IEEE 802. 1 1ac , IEE E 8 02. 1 1n , IEEE 802.1 1g , IEEE 802.1 1b , IEEE 802.1 1a , IEEE 802.1 1e , IE EE 802 .1 1i , IEEE 80 2. 1X , IEEE 802.3X , IEEE 802.3 , I EEE 802.3u , I EEE 802.3ab Protocols TCP /IP , PPP oE , DHCP , ICMP , N AT , SNTP P ...

  • TP-Link AC1900 - page 142

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router Appendix D: Glossary  802.11ac - IEE E 802.11ac is a wireless comput er networking st andard of 802.11.Th is specificat ion will enable m ulti - station W LAN thr oughput of at lea st 1 gigabit per second .This is accompl ished by extending the air interfac e concepts embrac ed by 802.11n: ...

  • TP-Link AC1900 - page 143

    Archer C 9 AC 1 90 0 Wireless Dual B and Gigabit Router  MTU ( Maxim um Transm ission Uni t ) - The size in bytes of the largest packet t hat can be transmitt ed.  N AT ( N etwork A ddress T ranslatio n) - NAT techn ology tr anslates IP addresse s of a local area networ k to a different IP addr ess for the Internet .  PPPo E ( P oin t to P ...

Manufacturer TP-Link Category Network Router

Documents that we receive from a manufacturer of a TP-Link AC1900 can be divided into several groups. They are, among others:
- TP-Link technical drawings
- AC1900 manuals
- TP-Link product data sheets
- information booklets
- or energy labels TP-Link AC1900
All of them are important, but the most important information from the point of view of use of the device are in the user manual TP-Link AC1900.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TP-Link AC1900, service manual, brief instructions and user manuals TP-Link AC1900. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TP-Link AC1900.

Similar manuals

A complete manual for the device TP-Link AC1900, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TP-Link AC1900 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TP-Link AC1900.

A complete TP-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TP-Link AC1900 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TP-Link AC1900, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TP-Link AC1900, that we can find in the current document
3. Tips how to use the basic functions of the device TP-Link AC1900 - which should help us in our first steps of using TP-Link AC1900
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TP-Link AC1900
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TP-Link AC1900 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TP-Link AC1900?

Use the form below

If you did not solve your problem by using a manual TP-Link AC1900, ask a question using the form below. If a user had a similar problem with TP-Link AC1900 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)