English dropdown-ico

Manual Kicker DXA125.2

28 pages 2 mb
Download

Go to site of 28

Summary
  • Kicker DXA125.2 - page 1

    DXA AMPLIFIERS Owner’s Manual DXA125.2 Manual del Propietario | Español AMPLIFICADOR DEL LA SERIE DXA.2 Benutzerhandbuch | Deutsch MONOVERSTÄRKER DER DXA.2-SERIE Manuel d’utilisation | Française AMPLIFICATEUR DE SÉRIE DXA.2 2014 DXA Stereo Amp Rev B.indd 1 2014 DXA Stereo Amp Rev B.indd 1 8/2/2013 3:32:23 PM 8/2/2013 3:32:23 PM ...

  • Kicker DXA125.2 - page 2

    2 DXA.2-SERIES AMPLIFIER OWNER’S MANUAL INST ALLA TION Mounting: Choose a structurally sound location to mount your KICKER amplifi er . Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er . If possible, mount the amplifi er in th ...

  • Kicker DXA125.2 - page 3

    3 Model External Fuse (sold separately) Power/Ground W ire KICKER W iring Kit DXA125.2 1 x 40 Ampere 8 Gauge PK8, ZCK84 Install a fuse within 18” (45cm) of the battery and in-line with the power cable connected to your amplifi er . If you ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be ...

  • Kicker DXA125.2 - page 4

    4 STEREO OPERA TION minimum impedance of 2 ohms per channel BRIDGED OPERA TION (MONO) minimum impedance of 4 ohms STEREO-AND-MONO-SIMUL T ANEOUSL Y (SAMS) OPERA TION minimum impedance of 4 ohms bridged (mono) and 2 ohms per channel stereo 2014 DXA Stereo Amp Rev B.indd 4 2014 DXA Stereo Amp Rev B.indd 4 8/2/2013 3:32:27 PM 8/2/2013 3:32:27 PM ...

  • Kicker DXA125.2 - page 5

    5 OPERA TION OFF HI LO Automatic T ur n-On Selection: The DXA series offers two automatic turn-on modes; +12V and DC Offset. • Remote T urn-On: Run 18 gauge wire from the Remote T urn-On Lead on your source unit to the terminal labeled REM between the amplifi er ’ s positive and negative power terminals. • DC Offset T urn-On: The DC Offset m ...

  • Kicker DXA125.2 - page 6

    6 TROUBLESHOOTING If your amplifi er does not appear to be working, check the obvious things fi rst such as blown fuses, poor or incorrect wiring connections, incorrect setting of crossover switch and gain controls, etc. There are Power (PWR) & Protection (PRT) LEDs on the side panel of your Kicker DXA series amplifi er . Depending on the st ...

  • Kicker DXA125.2 - page 7

    7 KICKER will now provide a thr ee- year warranty with all DXA-Series Amplifi er purchases paired with a qualifying KICKER Installation Kit* . This extends the standard warranty by an additional year . Amplifi er and Kit must be purchased from an Authorized KICKER Dealer . KICKER DXA amplifi er success is currently at an unheard-of rate, making ...

  • Kicker DXA125.2 - page 8

    8 Modelo: DXA125.2 Potencia RMS a 14.4V , 4Ω estéreo, ≤ 1% THD+N a 14.4V , 2Ω estéreo, ≤ 1% THD+N a 14.4V , 4Ω mono, ≤ 1% THD+N 30W x 2 60W x 2 125W x 1 Longitud [pulg. cm.] 8-1/8, 21 Altura [pulg. cm.] 2-3/8, 6 Ancho [pulg. cm.] 7-3/16, 18 Respuesta de frecuencia [Hz] 10–20k Relación señal a ruido [dB} >95, ponderado-A, re: poten ...

  • Kicker DXA125.2 - page 9

    9 12V batería fusible externo encendido a distancia (página 11) conexión a tierra conexión a tierra ≤18” (45cm) ≤24” (60cm) Cable de salida de altavoz de alto nivel Hacia el amplifi cador Hacia el amplifi cador Conexión a tierra o blindaje + – cable central KICKER KISL Cable de salida de altavoz de alto nivel O El amplifi cador DX ...

  • Kicker DXA125.2 - page 10

    10 FUNCIONAMIENTO EN PUENTE (MONOFÓNICO) impedancia mínima de 4 ohmios en puente FUNCIONAMIENTO SIMUL T ÁNEO EN ESTEREOFÓNICO Y MONOFÓNICO impedancia mínima de 4 ohmios en monofónico y 2 ohmios por canal en estereofónico simultáneamente FUNCIONAMIENTO POR DOS CANALES (ESTEREOFÓNICO) impedancia mínima de 2 ohmios por canal en estereofóni ...

  • Kicker DXA125.2 - page 11

    11 FUNCIONAMIENTO OFF HI LO Selección de Encendido Automático: La serie DXA ofrece dos modalidades de encendido automático que: +12V , y compensación de CC. • Encendido a Distancia: Instale cable calibre 18 desde el conductor de encendido a distancia de la unidad fuente hasta la terminal etiquetada REM entre las terminales de alimentación po ...

  • Kicker DXA125.2 - page 12

    12 RESOLUCIÓN DE PROBLEMAS Si su amplifi cador parece no estar funcionando, revise lo obvio primero: fusibles quemados, conexiones malas o incorrectas, posición incorrecta de los selectores de crossover y amplifi cación, etc. Su amplifi cador modelo DXA de KICKER cuenta con los LED de protección (PRT) y de encendido (PWR) en el panel de alim ...

  • Kicker DXA125.2 - page 13

    13 PRECAUCIÓN: Cuando haga arrancar el vehículo con cables de arranque conectados a una batería externa, asegúrese de que las conexiones de los cables de arranque sean correctas. Conectar los cables de arranque de manera incorrecta puede quemar los fusibles del amplifi cador y causar fallas en otros sistemas del vehículo. Si tiene más pregun ...

  • Kicker DXA125.2 - page 14

    14 Modell: DXA125.2 RMS-Leistung @ 14,4V , 4Ω stereo, ≤ 1% Gesamtklirrfaktor @ 14,4V , 2Ω stereo, ≤ 1% Gesamtklirrfaktor @ 14,4V , 4Ω mono, ≤ 1% Gesamtklirrfaktor 30W x 2 60W x 2 125W x 1 Länge [Zoll, cm] 8-1/8, 21 Höhe [Zoll, cm] 2-3/8, 6 Breite [Zoll, cm] 7-3/16, 18 Frequenzkurve [Hz] 10–20k Signal-Rausch-V erhältnis [dB] >95, A- ...

  • Kicker DXA125.2 - page 15

    15 12V Der DXA-V erstärker hat zwei RCA-Eingänge mit Eingangsempfi ndlichkeits-Differential, die entweder Hoch- oder Niedrigpegelsignale vom Autoradio empfangen. Kann das Signal mit den Hochpegel-Lautsprecherausgängen am Autoradio an den V erstärker übertragen werden. Stellen Sie den Eingangspegelschalter an der Endplatte des V erstärkers au ...

  • Kicker DXA125.2 - page 16

    16 ZWEIKANALBETRIEB (STEREO) Minimalimpedanz von 2 Ohm pro Kanal BRÜCKENBETRIEB (MONO) Minimalimpedanz von 4 Ohm GLEICHZEITIGER STEREO- UND MONO-BETRIEB (SAMS) Mindestimpedanz von 4 Ohm (Mono) bzw . 2 Ohm pro Kanal (Stereo) bei gleichzeitigem Betrieb 2014 DXA Stereo Amp Rev B.indd 16 2014 DXA Stereo Amp Rev B.indd 16 8/2/2013 3:32:30 PM 8/2/2013 3 ...

  • Kicker DXA125.2 - page 17

    17 Automatische Einschaltung: Die DXA-Serie umfasst zwei automatische Einschaltmodi: +12V und DC Offset. • Remote T urn-On (Ferneinschaltung): Verlegen Sie 18 GA-Kabel von der Ferneinschaltung an Ihrem Autoradio zum REM-T erminal zwischen den positiven und negativen Stromanschlüssen des Verstärkers. Das ist die bevorzugte automatische Einschalt ...

  • Kicker DXA125.2 - page 18

    18 PROBLEMBEHEBUNG Wenn der V erstärker nicht zu funktionieren scheint, sollten Sie zuerst offensichtliche Faktoren prüfen, wie durchgebrannte Sicherungen, schlechte oder fehlerhafte V erkabelung, inkorrekte Einstellung des Crossover- Schalters und der V erstärkungsregler etc. Am seitlichen Einschaltfeld des Kicker DXA-Verstärkers befi nden si ...

  • Kicker DXA125.2 - page 19

    19 DXA125.2 30 x 2 @ 4 ohms, 14,4V GS, 1% Klirrfaktor , CEA-2006B (Watts) Rauschabstand -75dB CEA-2006B (ref: 1W , A-gewichtet) 2014 DXA Stereo Amp Rev B.indd 19 2014 DXA Stereo Amp Rev B.indd 19 8/2/2013 3:32:30 PM 8/2/2013 3:32:30 PM ...

  • Kicker DXA125.2 - page 20

    20 Modèle: DXA125.2 Puissance RMS @ 14,4V , 4Ω stéréo, ≤1 % THD+N @ 14,4V , 2Ω stéréo, ≤1 % THD+N @ 14, 4Ω mono, ≤1 % THD+N 30W x 2 60W x 2 125W x 1 Longueur [po, cm] 8-1/8, 21 Hauteur [po, cm] 2-3/8, 6 Largeur [po, cm] 7-3/16, 18 Réponse en fréquence [Hz] 10–20 k Rapport signal/bruit [dB] >95, Niveau acoustique pondéré A, cf ...

  • Kicker DXA125.2 - page 21

    21 L ’amplifi cateur DXA est doté de deux entrées RCA différentielles de sensibilité d’entrée qui reçoivent des signaux de haut ou bas niveau à partir de l’appareil source de la stéréo de votre voiture. Le signal peut être transmis à l’amplifi cateur en utilisant les sorties de haut-parleur de haut niveau sur l’appareil sourc ...

  • Kicker DXA125.2 - page 22

    22 FONCTIONNEMENT À STÉRÉO impédance minimum de 2 ohms par canal FONCTIONNEMENT PONTÉ (MONO) impédance minimum de 4 ohms FONCTIONNEMENT SIMUL T ANÉ STÉRÉO ET MONO (SAMS) impédance minimum simultanément de 4 ohms en mono et 2 ohms par canal en stéréo 2014 DXA Stereo Amp Rev B.indd 22 2014 DXA Stereo Amp Rev B.indd 22 8/2/2013 3:32:31 PM ...

  • Kicker DXA125.2 - page 23

    23 UTILISA TION Sélection de Mise sous T ension Automatique : La série DXA propose deux modes d’allumage automatique différents ; +12 V et décalage en continu. • Mise sous T ension à Distance : Faites passer un fi l de calibre 18 à partir du fi l de mise sous tension à distance sur votre appareil source jusqu’à la borne étiquetée ...

  • Kicker DXA125.2 - page 24

    24 EN CAS DE DIFFICUL TÉ Si votre amplifi cateur ne marche pas, vérifi ez d’abord les possibilités évidentes comme les fusibles sautés, les branchements incorrects ou desserrés, le mauvais réglage des commandes de gain et du commutateur du fi ltre etc. Se présentent également des DEL d’alimentation (PWR) et de protection (PRT) sur l ...

  • Kicker DXA125.2 - page 25

    25 DXA125.2 30 x 2 @ 4 ohms, 14.4V C.C., 1% de Distorsion Harmonique T otale, CEA-2006B (W) Rapport Signal sur Bruit -75dB CEA-2006B (ref: 1W , pondéré A) 2014 DXA Stereo Amp Rev B.indd 25 2014 DXA Stereo Amp Rev B.indd 25 8/2/2013 3:32:32 PM 8/2/2013 3:32:32 PM ...

  • Kicker DXA125.2 - page 26

    26 ELECTRONICS LIMITED W ARRANTY When purchased from an Authorized KICKER Dealer , KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase with receipt. If this product is identifi ed as “Refurbished” or “B Goods”, the warranty is limited ...

  • Kicker DXA125.2 - page 27

    27 INTERNA TIONAL W ARRANTY Contact your International KICKER dealer or distributor concerning specifi c procedures for your country’s warranty policies. WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! T urning up a system to a level that has audible distortion is more damaging to your ear ...

  • Kicker DXA125.2 - page 28

    ©2013 Stillwater Designs 2014 DXA Stereo Amp Rev B.indd 28 2014 DXA Stereo Amp Rev B.indd 28 8/2/2013 3:32:32 PM 8/2/2013 3:32:32 PM ...

Manufacturer Kicker Category Car Amplifier

Documents that we receive from a manufacturer of a Kicker DXA125.2 can be divided into several groups. They are, among others:
- Kicker technical drawings
- DXA125.2 manuals
- Kicker product data sheets
- information booklets
- or energy labels Kicker DXA125.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kicker DXA125.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kicker DXA125.2, service manual, brief instructions and user manuals Kicker DXA125.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kicker DXA125.2.

Similar manuals

A complete manual for the device Kicker DXA125.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kicker DXA125.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kicker DXA125.2.

A complete Kicker manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kicker DXA125.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kicker DXA125.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kicker DXA125.2, that we can find in the current document
3. Tips how to use the basic functions of the device Kicker DXA125.2 - which should help us in our first steps of using Kicker DXA125.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kicker DXA125.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kicker DXA125.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kicker DXA125.2?

Use the form below

If you did not solve your problem by using a manual Kicker DXA125.2, ask a question using the form below. If a user had a similar problem with Kicker DXA125.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)