English dropdown-ico

Manual Siemens 6210

86 pages 0.82 mb
Download

Go to site of 86

Summary
  • Siemens 6210 - page 1

    62 1 0 / 6220 User Manual ...

  • Siemens 6210 - page 2

    Tone Commander 6210/622 0 User Manual i Contents Introduction .......................................................................................... 1 General Features ............................................................................... 1 Models/Opti ons ................................................................................ ...

  • Siemens 6210 - page 3

    ii Tone Commander 6210/622 0 User Manual Terminal Mode ................................................................................. 36 Installation Password ....................................................................... 37 Reset to Factory De fault Settings .................................................... 39 Voice Announce ....... ...

  • Siemens 6210 - page 4

    Tone Commander 6210/622 0 User Manual 1 Introduction General Features ________________________ Tone Commander 6210 and 6220 ISDN Telepho nes are easy to use multiline terminals with advanced automatic se tup capabilities. S/T and U interface models are available with 10 or 20 call appearances. Th e phones support either National IS DN or Lucent 5ES ...

  • Siemens 6210 - page 5

    2 Tone Commander 6210/622 0 User Manual Model Multifunction Keys ISDN Connection 6210T 10 (40 with 6030X) S/T 6220T 20 (50 with 6030X) S/T 6210U 10 (40 with 6030X) U 6220U 20 (50 with 6030X) U Controls and Indicators __________________ ...

  • Siemens 6210 - page 6

    Tone Commander 6210/622 0 User Manual 3 1) Display – shows the call state, calle r ID, dialed digits, network call control messages, and elapsed time du ring calls. When not on a call, the date, time of day, and softkey options are displayed. The viewing angle can be adjuste d by tilting the display, then changing the contrast setting – see pa ...

  • Siemens 6210 - page 7

    4 Tone Commander 6210/622 0 User Manual 11) Speaker Key – enables/disables the spea kerphone. A green indicator on the key is lit when the speakerpho ne is in use. 12) Dial Pad – dials telephone numbers, and sends DTMF ton es to external equipment such as voice mail system s. The dial pad is used for number entry during setup. 13) Transfer Key ...

  • Siemens 6210 - page 8

    Tone Commander 6210/622 0 User Manual 5 Operation Placing a Call ___________________________ Selecting a Call Appearance If the Call Preference option (page 61) is set to Idle or Ringing , your telephone will automatically select an idle call appearance when you g o off-hook, or activate the speakerphon e when you press a Speed Dial, DSS, REDIAL, d ...

  • Siemens 6210 - page 9

    6 Tone Commander 6210/622 0 User Manual Last Number Redial The Redial feature dials the last nu mbe r that was dialed with the dial pad or a Speed Dial key. Digits dialed after a call is conn ected are not saved. Select REDIAL to redial the last number. Using the Call Log – refer to pag e 11. Using the Call Directory – refer to page 14. Using S ...

  • Siemens 6210 - page 10

    Tone Commander 6210/622 0 User Manual 7 Using DSS Keys DSS keys are a special type of Call Appearance/Di rectory Number keys that are programmed with spee d dial numbers to provide Di rect Station Selection. When the call appearance is idle or bu sy, DSS keys act like Speed Dial keys, to call a station. When ringi ng, DSS keys act like CA/DN keys, ...

  • Siemens 6210 - page 11

    8 Tone Commander 6210/622 0 User Manual Bridging a Shared Call Appearance ________ You can bridge (connect to) an active call on a call appearance that is shared with other terminals, unles s call privacy is enabled at the network. Press the busy Call Appearance key for the call you want to bridge. Lift the handset or press the Spkr key. The call d ...

  • Siemens 6210 - page 12

    Tone Commander 6210/622 0 User Manual 9 Transferring Calls _______________________ Use this feature to transfer an active call to another party. Press the Tran key while in an active call. The current call is placed on hold, and an idle call appearance is automatically selected. The Tran indicator flashes (on some network switch types, the Conf ind ...

  • Siemens 6210 - page 13

    10 Tone Commander 6210/622 0 User Manual Conferencing a Held Call Press the Conf key while you are on an active call with another call on hold. The current call is placed on hold a nd an idle call appearance is automatically selected. The Conf indicator lights. Press the Call Appearance key for the held call you wish to add to the conference. Press ...

  • Siemens 6210 - page 14

    Tone Commander 6210/622 0 User Manual 11 Privacy Prevents other users from bridging on your a ctive call. Group Call Pickup Answers a call ringing at another telephone in your workg roup. Directed Call Pickup Answers a call ringing at a specified telephone. Automatic Callback (Recall) Calls you when a dialed busy station be comes idle, then redials ...

  • Siemens 6210 - page 15

    12 Tone Commander 6210/622 0 User Manual Viewing the Call Log Press the Call key. Select LOG. A password may be set to prevent unauthorized e ntry into your call log. When prompted for a passwo rd, enter your 4-digit password with the dial pad. Press the Done key after entering the password. To change or remove the password, please refe r to page 6 ...

  • Siemens 6210 - page 16

    Tone Commander 6210/622 0 User Manual 13 Shortcut to the Unanswered Call Log If any calls ringing at your telephone were u nanswered, UNANS will appear in the displa y. You can select UNANS to enter directly into the Unans wered call log. After you have viewed the unanswered call log, the UNANS display indication will clear until new calls are rece ...

  • Siemens 6210 - page 17

    14 Tone Commander 6210/622 0 User Manual Using the Call Directory __________________ What is the Call Directory? The Call Directory is a softkey-bas ed speed dialing system that can store up to 36 entries. A name display identifies e ach entry. Use the directory to store frequently-dialed n umbers when additional Speed Dial keys are not available. ...

  • Siemens 6210 - page 18

    Tone Commander 6210/622 0 User Manual 15 Using the Speakerphone _________________ The speakerphone featu re allows two-way hand s-free conversation and on-hook dialing. Placing and Answering Calls The Call Preference option (page 61) determines the be havior of your telephone when the Spkr key is pressed. If this option is set to Idle or Ringing , ...

  • Siemens 6210 - page 19

    16 Tone Commander 6210/622 0 User Manual Using Voice Announce ___________________ The Voice Announce feature may be used to provide hands-free call announcing of screened calls or station-level pa ging when your phone is on-hook. Incoming calls that meet spe cific predefined criteria (see page 40) can be answered automatically by the spe akerphone. ...

  • Siemens 6210 - page 20

    Tone Commander 6210/622 0 User Manual 17 Using a Headset ________________________ Headset Mode Operation Your telephone can be set for hand set or headset use (see page 62). With a headset, the Spkr key is used as the hookswitch, and the speakerphone feature is disa bled. Optimizing the Phone to Match Your Headset Headset models may vary in their m ...

  • Siemens 6210 - page 21

    18 Tone Commander 6210/622 0 User Manual Installation Ordering ISDN Service ___________________ ISDN ordering forms may be sup plied by your service provider. You can also print forms using the PC-ba sed Configuration Wizard. Plea se refer to Appendix A in this manual. Consult your service provider to plan your service in stallation. Allow adequate ...

  • Siemens 6210 - page 22

    Tone Commander 6210/622 0 User Manual 19 Basic Multipoint: (recommended for m ost applications) Short Multipoint: Extended Point-to-Point: Line and Power Connections Power for the telephone may be provided on PS1 (p hantom power on the transmit and receive pairs from the NT1 ) or PS2 (power on pins 7 and 8). Tone Commander NT1U-22 0TC standalone NT ...

  • Siemens 6210 - page 23

    20 Tone Commander 6210/622 0 User Manual WARNING : If a separate power supply is used to provide PS2 power to the telephone, make sure that the output ground of the NT1 power supply and the PS2 powe r supply are connected (with the correct polarity) to a common groun d reference point or electrical damage to the telephone may occur. • If your pho ...

  • Siemens 6210 - page 24

    Tone Commander 6210/622 0 User Manual 21 6210U/6220U Installation _________________ U models include a built-in NT1. Optional extern al ISDN S/T Terminal Equipment may share the telephone's ISDN line by conne cting to the S/T jack on the telephone. If you are not using external Terminal Equipment, no termin ation switch setting is required. Se ...

  • Siemens 6210 - page 25

    22 Tone Commander 6210/622 0 User Manual Extended Point-to-Point: Line and Power Connections U models are powered o n pin 7 (-) and pin 8 (+) of the U IN jack. PS1 and PS2 output power is supplied on the S/T OUT jack to power a n additional terminal. • Using an 8-conducto r line cord, connect the U IN jack on the telephone to the line jack. Route ...

  • Siemens 6210 - page 26

    Tone Commander 6210/622 0 User Manual 23 Wall Mounting __________________________ Robust handset retainer clips fo r wall mount use are available on request from Tone Comm ander. Rotating the Base The phone base must be rotated for wall mounting. • Disconnect the line cord. • Remove the retaining screw in the center of the ba se. • Press the ...

  • Siemens 6210 - page 27

    24 Tone Commander 6210/622 0 User Manual Configure the Set _______________________ ISDN configuration is performed aut omatically in many cases. The telephone set will detect the switch type, set the SPID number, and download other setup param eters w hen these features are available from the central office. You will be prompted for any required se ...

  • Siemens 6210 - page 28

    Tone Commander 6210/622 0 User Manual 25 Parameter Download (National ISDN only) Parameter Download is a network feature that Identifies Call Appearance and Feature Activator key s that are assigned to your line so that your phone may be configured automatically. Note : Speed Dial and DSS keys are not configured by Parameter Download, as well as ot ...

  • Siemens 6210 - page 29

    26 Tone Commander 6210/622 0 User Manual Customize your Phone ___________________ You can set the following options on your ph one. DSS – converts Call Appearance key s to Direct Station Selection keys with busy lamp indication for one-button speed dialing of stations that are monitored by your phone (page 34). Clock – sets the time-of-day cloc ...

  • Siemens 6210 - page 30

    Tone Commander 6210/622 0 User Manual 27 Label the Set ___________________________ Label the multifunction keys with the telephone n umber, feature name, speed dial party name, or other appropri ate designation. A perforated label sheet is provided with the telephone. An ISDN Telephone Setup Wizard for Windows can be downloaded from Tone Commander? ...

  • Siemens 6210 - page 31

    28 Tone Commander 6210/622 0 User Manual Installation Options Options in this section are typically set at the time of installation. Many options can be set automatically by the AutoSPID, Automatic Switch Detect, and Parameter Download features, if sup ported on the network. The following options can be ch anged from the Installation Options menu: ...

  • Siemens 6210 - page 32

    Tone Commander 6210/622 0 User Manual 29 A password may be set to prevent unauthorized e ntry into the Installation Options menu. When prompted for a password, enter you r 4-digit password with the dial pad. Press the Done key after entering the password. To change or remove the password, please refe r to page 37. SPID Entry _______________________ ...

  • Siemens 6210 - page 33

    30 Tone Commander 6210/622 0 User Manual Parameter Download _____________________ (National ISDN only) ISDN Parameter Download is a n autom ated feature for configuring Call Appearance and Feature Activator key s. If configured for auto download, a Parameter Download is executed when the phon e initializes with a new SPID, or when requested by the ...

  • Siemens 6210 - page 34

    Tone Commander 6210/622 0 User Manual 31 From the Installation Options menu, select KEYS. ( Setup → INSTL → KEYS) The status indicator for each key will indicate the current setting. Green – Call Appearance or DSS. Red – Feature Activator. Off – Unused or Speed Dial. On the phone or expansion modul e, press the multifun ction key to be pr ...

  • Siemens 6210 - page 35

    32 Tone Commander 6210/622 0 User Manual Automatic Call Appearance Selection A call appearance is automatically selected when originating a new call, answering an incoming call, o r conferencing or transferring a call. Three configuration options determi ne how call appearances are selected: Call Preference (page 61) – dete rmines whether a new c ...

  • Siemens 6210 - page 36

    Tone Commander 6210/622 0 User Manual 33 Feature Activator Keys Feature Activator keys must be configured to match network feature activator codes that have been assi gned to your line. Using the dial pad, enter the feature activator code as signed by your network service provider. If you need to make corrections whil e entering numbers, select Å ...

  • Siemens 6210 - page 37

    34 Tone Commander 6210/622 0 User Manual DSS Keys DSS keys are a special type of Call Appearance/Di rectory Number keys that are programmed with spee d dial numbers to provide Di rect Station Selection. When the call appearance is idle or busy, DSS keys act like Speed Dial keys, to call a station. When ringi ng, DSS keys act like CA/DN keys, to ans ...

  • Siemens 6210 - page 38

    Tone Commander 6210/622 0 User Manual 35 Speed Dial Keys Keys not assigned for call appearan ces or feature activators may be used as Speed Dial key s. Dial strings can incl ude network feature activator codes, to simplify the use of features such as Directed Call Pickup and Call Forwarding. Spee d Dial keys may also be programmed from the User Opt ...

  • Siemens 6210 - page 39

    36 Tone Commander 6210/622 0 User Manual When digits have been entered, pre ss the Done key twice to return to the key selection menu or the Setup key to exit Setup Mode. Terminal Mode __________________________ (National ISDN only) If the network does not support Parameter Do wnload, you must manually select the terminal mode. From the Installatio ...

  • Siemens 6210 - page 40

    Tone Commander 6210/622 0 User Manual 37 Installation Password ____________________ You can set a password to prohibit unautho rized entry into the Installation Options menu. If a password is currently set, the di splay will prompt you to enter your password prior to making change s. From the Installation Options menu, select PASSWD. ( Setup → IN ...

  • Siemens 6210 - page 41

    38 Tone Commander 6210/622 0 User Manual Removing the Passwor d Select CLEAR. “PASSWORD CLEARED” will be disp layed to confirm that the password has been removed. Press the Done key to return to Installation Options menu or the Setup key to exit Setup Mode. What to do if you lose your password Contact your system administ rator or call Tone Com ...

  • Siemens 6210 - page 42

    Tone Commander 6210/622 0 User Manual 39 Reset to Factory Default Settings __________ Reset returns all settings to the facto ry defaults, and clears all speed dial numbers, logs, and passwords. This o ption is useful when moving the telephone to a new user or location. Default values are listed in the table on page 77. From the Installation Option ...

  • Siemens 6210 - page 43

    40 Tone Commander 6210/622 0 User Manual Voice Announce _________________________ This option allows certain incomin g calls to be answered automatically by the speakerphone. Voice Anno unce calls are restricted to calls on selected Call Appearance/Di rectory Number keys. In addition, calls from specified directory numbers, and/or call s of a selec ...

  • Siemens 6210 - page 44

    Tone Commander 6210/622 0 User Manual 41 Selecting Incoming Directory Nu mbers CA/DN keys must be configure d for Voice Announce before sele cting incoming DNs. Select DNs to restrict Voice Announce calls to sp ecific callers (or groups of callers). The Calling DN templates are mat ched to the incoming caller ID to identify Voice Announce calls. Yo ...

  • Siemens 6210 - page 45

    42 Tone Commander 6210/622 0 User Manual Selecting Alerting Patterns Use the Alert option to allow only specific types of incoming calls (e.g. internal, external, intercom, etc.). CA/DN keys must be configure d for Voice Announce before sele cting alerting patterns. Select ALERT to define a specific alerting pattern require d to validate incoming V ...

  • Siemens 6210 - page 46

    Tone Commander 6210/622 0 User Manual 43 Automatic Muting Select MUTE. Select ON to automatically mute the microphone during a Voice Announce call, or OFF to enable two-way conversations. Press the Done key after selecting the muting option. AUTOMATIC MUTE=ON ON OFF Done ...

  • Siemens 6210 - page 47

    44 Tone Commander 6210/622 0 User Manual Administration Options The following test and diagnostic optio ns are available from the Administration Options menu: • Local Inspect • Test Functions • Hardware Version • Diagnostics • Software Version • Terminal Restart • Serial Number • Erro r Log Administration Options Menu _____________ ...

  • Siemens 6210 - page 48

    Tone Commander 6210/622 0 User Manual 45 Local Inspect ___________________________ Local Inspect allows you to identify the call appearance/directo ry number or feature assignment of each configured key, dire ctory numbers, and the feature indicato r assignment for the Me ssage Indicator. You can use Local Inspect after a Parameter Downloa d to ver ...

  • Siemens 6210 - page 49

    46 Tone Commander 6210/622 0 User Manual Press the More 4 key to view: • Originate usage • Call appearance reservation DSS Key The display will show for the selected key: • Key number, directory number • DSS number Press the More 4 key to view: • Originate usage • Call appearance reservation Feature Activator, Conference, Transfer, or D ...

  • Siemens 6210 - page 50

    Tone Commander 6210/622 0 User Manual 47 Speed Dial Key The display will show the key number and program med autodial string for the selected key. Directory Numbers Select DNs to view the list of directory numbers on thi s phone. The first line on the display w ill show the directory number, and ‘ORIG’ if this is an originating DN. Press the Mo ...

  • Siemens 6210 - page 51

    48 Tone Commander 6210/622 0 User Manual Version ________________________________ Use this option to view the telephone’s hardware version, software version, and serial number. From the Administration Options menu, select VERS. ( Setup → ADMIN → VERS) Serial Number Select SERIAL. Hardware Version Select H/W. Software Version Select S/W. VERSI ...

  • Siemens 6210 - page 52

    Tone Commander 6210/622 0 User Manual 49 Optional Equipment Version Select 6030X, 6001TA, 6002TA, or other installed o ption. Press the Done key to return to the Administration Options menu or the Setup key to exit Setup Mode. Done MODEL:6030X BU TTON EXPAN VERSION: 01.01.04 ...

  • Siemens 6210 - page 53

    50 Tone Commander 6210/622 0 User Manual Test ___________________________________ Select this option to test the LCD display, LED indicators, and key s. From the Administration Options menu, select TEST. ( Setup → ADMIN → TEST) Display and LED Indicators Select DISPLY. LCD Display Select LCD. All pixels (picture elements, or dot s) on the displ ...

  • Siemens 6210 - page 54

    Tone Commander 6210/622 0 User Manual 51 Keys Select KEYS. Press each key on the telephone (not on the exp ansion module), including the dial pad keys, one at a time. A letter should appear in the display for each presse d key. On 6210 models, 10 additional letters will appe ar after the first keypress, representing the 10 “missing” m ultifunct ...

  • Siemens 6210 - page 55

    52 Tone Commander 6210/622 0 User Manual After all keys have been tested, pr ess any key to exit the test. You can also exit the test at any time by pressing the Done key to return to the Test menu or the Setup ke y to exit Setup Mode. Diagnostic Display ______________________ From the Administration Options menu, select. ( Setup → ADMIN → DIAG ...

  • Siemens 6210 - page 56

    Tone Commander 6210/622 0 User Manual 53 Viewing the Error and Download Logs ______ From the Administration Options menu, select LO G. ( Setup → ADMIN → More 4 → LO G) Select ERROR to view the error log or PARAM (National ISDN only) to view the Parameter Download log. The most recent log entry will be shown. Press the More 4 key to view previ ...

  • Siemens 6210 - page 57

    54 Tone Commander 6210/622 0 User Manual User Options The following personal preferen ce options can be changed from the User Options menu: • Time and Date • Handset/Headset Mode • Speed Dial Keys • Preset Volume Levels • Call Directory • Display Contrast • Personal Ringing • Call Log Password • Call Preference User Options Menu _ ...

  • Siemens 6210 - page 58

    Tone Commander 6210/622 0 User Manual 55 Setting the Time and Date ________________ From the User Options menu, select CLOCK. ( Setup → USER → CLOCK) The current time and date will be displayed, with the cursor flashing on the first digit. Enter new digits for the date and time with the dial pad. The cursor will advance automatically as each di ...

  • Siemens 6210 - page 59

    56 Tone Commander 6210/622 0 User Manual Speed Dial Programming From the User Options menu, select SPDIAL. ( Setup → USER → SPDIAL) The current state of each multif unction key is shown by the its status indicator. Green – unused key, available for speed dial use. Red – Speed Dial key that has already been programmed. Off – key set up for ...

  • Siemens 6210 - page 60

    Tone Commander 6210/622 0 User Manual 57 Setting Up the Call Directory _______________ Up to 36 numbers can be stored in t he Call Directory. Dire ctory entries are similar to Speed Dial keys, but are a ccessed from a display menu. Place your most frequently-dialed numbers on Spe ed Dial keys, if available, and put other numbers in the directo ry. ...

  • Siemens 6210 - page 61

    58 Tone Commander 6210/622 0 User Manual Select NUMBER. Enter the number to dial with the dial pad. Dialing pau ses are entered with the PAUSE softkey – see page 56. If you need to make corrections whil e entering numbers, select Å BKSP (backspace) to delete the previou s digit. CLEAR removes all digits, allowing you to start o ver. When all dig ...

  • Siemens 6210 - page 62

    Tone Commander 6210/622 0 User Manual 59 Personal Ringing Options ________________ Ringing Tone Your telephone has eight distinct rin ging tones available. In environments with multiple terminals, unique ringing tones can help identify ringing stations. The selected ringing tone is u sed for all call appearances. From the User Options menu, select ...

  • Siemens 6210 - page 63

    60 Tone Commander 6210/622 0 User Manual Ringing Control for Indivi dual Call Appearances You can control the audible ringing at your teleph one for each call appearance. Call appearances set to ALWAYS will ring immediately. Use this setting for your primary call appearan ces. NEVER completely disables ringi ng on the call appearance. Use this sele ...

  • Siemens 6210 - page 64

    Tone Commander 6210/622 0 User Manual 61 Call Preference Options __________________ (National ISDN only) Call Preference determines what happ ens when you lift the handset or press the Spkr key. For Lucent 5ESS Custom ISDN service, Call Preference is controlled by the network. RING preference will automatically select the oldest audibly ringing cal ...

  • Siemens 6210 - page 65

    62 Tone Commander 6210/622 0 User Manual Handset/Headset Configuration ____________ Handset/Headset Mode Select handset or headset operation with this option. Speakerphone mode and the hookswitch are dis abled in hea dset mode; the Spkr key is used in place of the hookswitch. From the User Option s menu, sele ct VOICE. ( Setup → USER → More 4 ? ...

  • Siemens 6210 - page 66

    Tone Commander 6210/622 0 User Manual 63 Receive (handset and headset) Select RCV- or RCV+ to adjust the receiver volume level. The new setting will be shown in the display. Transmit (headset only) Select VOICE. Select XMT- or XMT+ to adjus t the headset’s transmit volume level. The new setting will be shown in the display. Press the Done key to ...

  • Siemens 6210 - page 67

    64 Tone Commander 6210/622 0 User Manual Setting a Call Log Password ______________ You can set a password to prohibit unauthorized ent ry into your Call Log. From the User Options menu, select PASSWD. ( Setup → USER → More 4 → PASSWD) If a password is currently set, the display will prompt you to enter your password prior to making cha nges. ...

  • Siemens 6210 - page 68

    Tone Commander 6210/622 0 User Manual 65 Press the Done key to return to the User Options menu or the Setup key to exit Setup Mode. Removing the Passwor d Select CLEAR. “PASSWORD CLEARED” will be disp layed to confirm that the password has been removed. Press the Done key to return to User Options menu or the Setup key to exit Setup Mode. What ...

  • Siemens 6210 - page 69

    66 Tone Commander 6210/622 0 User Manual Troubleshooting Inoperable Telephone Recovery Procedures Whenever a telephone is unable to oper ate normally or remains in a particular state with no escape, accomplish the follo wing: 1. Press SETUP, the SETUP Menu should be displayed. This response indicates that there is power to the teleph one, and its m ...

  • Siemens 6210 - page 70

    Tone Commander 6210/622 0 User Manual 67 Layer 3 does not initialize: • Verify that the correct SPID number is programmed. • Verify with the serving telco that they have not changed from a customized to a universal SPID format. • Verify with the serving telco that they have not changed their office to a new area code (some SPID formats in clu ...

  • Siemens 6210 - page 71

    68 Tone Commander 6210/622 0 User Manual Telephone Configuration Troubleshooting CA/DN trouble Check Fix Inbound calls to a specific line cause the LED to flash, but there is no audible ringing. >SETUP >USER >RING >CONTROL >Select line >ALWAYS A specific line is selected that is supposed to have dial tone, but there isn’t any. & ...

  • Siemens 6210 - page 72

    Tone Commander 6210/622 0 User Manual 69 Appendix A Ordering ISDN Service Setup Wizard The ISDN Telephone Setup Wizard sim plifies ordering ISDN service. This Windows 95/98/ NT program prompts you for all required information, and prints the service order form s and key designation labels. You can download the Setup Wiza rd from Tone Commander’s ...

  • Siemens 6210 - page 73

    70 Tone Commander 6210/622 0 User Manual Recommended Button Assignments Network Button # Assignment 1 Call Appearance (PDN) 2 Call Appearances 3 . . . . . . 58 59 Additional Feature Keys 60 Conference * 61 Transfer * 62 Drop * 63 Message Waiting Indicator * National ISDN only; DO NOT assign the se keys for 5ESS Custom ISDN. With Parameter Downloadi ...

  • Siemens 6210 - page 74

    Tone Commander 6210/622 0 User Manual 71 Appendix B Setup Menu Tree INSTL (Installation Options) SPID (Service Profile Identifier) ...................................... page 29 PARAM (Parameter Download – National ISDN o nly) ..... page 30 START (Start Download) AUTO (Automatic Download Enable/Disable) KEYS CA/DN (Call Appearance/Directory Num b ...

  • Siemens 6210 - page 75

    72 Tone Commander 6210/622 0 User Manual VA (Voice Announce) ..................................................... page 40 KEYS (CA/DN Keys that accept VA Calls) DNs (Incoming Directory Numbers) ALERT (Incoming Call Alerting Patterns) MUTE (Automatic Microphone Muting) ADMIN (Administration Options) INSPCT (Local Inspect) .......................... ...

  • Siemens 6210 - page 76

    Tone Commander 6210/622 0 User Manual 73 USER (User Options) CLOCK (Set Time and Date) .......................................... page 55 SPDIAL (Speed Dial) ...................................................... page 55 PAUSE (Dialing Pause) DIR (Call Directory) .......................................................... page 57 RING (Personal Ring ...

  • Siemens 6210 - page 77

    74 Tone Commander 6210/622 0 User Manual POTS (6002TA Analog POTS Port Options) Options in this menu are described in the 6002TA Analog Port Terminal Adapter User Manual. RING (Ringing Control) ALWAYS (Ring Immediately) NEVER (Never Ring) WAIT2 (Wait 2 Ring Cycles / 12 seconds) WAIT3 (Wait 3 Ring Cycles / 18 seconds) WAIT4 (Wait 4 Ring Cycles / 24 ...

  • Siemens 6210 - page 78

    Tone Commander 6210/622 0 User Manual 75 Appendix C Warranty and Service Tone Commander Product Warranty For a period of one year from date of dealer pu rchase, but not to exceed 16 months from date of manufacture, Tone Command er Systems, Inc. (Tone Commander) wa rrants its product s to be free from defects in material and workm anship under condi ...

  • Siemens 6210 - page 79

    76 Tone Commander 6210/622 0 User Manual Appendix D Specifications Contents of Shipping Container Modular handset coil-cord Modular line cord Label Sheet Handset Manual Quick Reference Card Standards Compliance ANSI T1.601-1992 and T1.605-19 91 National ISDN, Lucent 5ESS Custom ISDN FCC Part 15 FCC Part 68 Hearing Aid Compatib le FCC Part 68 Volume ...

  • Siemens 6210 - page 80

    Tone Commander 6210/622 0 User Manual 77 Factory Default Settings Parameter Default Value (National ISDN) Default Value (5ESS Custom ISDN) Auto Param. Download Enabled N/A CA Re servation Not Reserved Not Reserved Call Log Password None None Call Preference Ring (Network Controlled) * Clock Time of the last error log entry Time of the last error lo ...

  • Siemens 6210 - page 81

    78 Tone Commander 6210/622 0 User Manual Appendix E UL/FCC Statements Important Safety Instructions 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet lo cations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telepho ne wires or terminals unless the telepho ne ...

  • Siemens 6210 - page 82

    Tone Commander 6210/622 0 User Manual 79 14. To reduce the risk of electric shock, do not disassemb le this product, but take it to a qualified serviceman when some service or repair work is required. Opening or removing cov ers may expose you to dan gerous voltages or other risks. Incorrect re assembly can cause electric shock when the appliance i ...

  • Siemens 6210 - page 83

    80 Tone Commander 6210/622 0 User Manual FCC Requirements The Tone Commander Models 6210T, 6210U, 6220T, and 6220U comply with Part 68 of the FCC Rules. The label affixed to this equipment contains, among other information, the FCC Registration for this equipment. You must, upon request, provide this information to your telephone company. The follo ...

  • Siemens 6210 - page 84

    Tone Commander 6210/622 0 User Manual 81 ...

  • Siemens 6210 - page 85

    82 Tone Commander 6210/622 0 User Manual ...

  • Siemens 6210 - page 86

    11609 49th Place West Mukilteo, WA 98275-4255 (800) 524-0024 (425) 34 9-1000 Fax: (425) 349-1010 www.tonecommander.com 13-102800 Rev. L ©2003 ...

Manufacturer Siemens Category Telephone

Documents that we receive from a manufacturer of a Siemens 6210 can be divided into several groups. They are, among others:
- Siemens technical drawings
- 6210 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 6210
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 6210.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 6210, service manual, brief instructions and user manuals Siemens 6210. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 6210.

Similar manuals

A complete manual for the device Siemens 6210, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 6210 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 6210.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 6210 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 6210, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 6210, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 6210 - which should help us in our first steps of using Siemens 6210
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 6210
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 6210 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 6210?

Use the form below

If you did not solve your problem by using a manual Siemens 6210, ask a question using the form below. If a user had a similar problem with Siemens 6210 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)