Manual Gigabyte GA-J1900N-D3V (rev. 1.0)

32 pages Not applicable
Download

Go to site of 32

Summary
  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 1

    GA-J1900N-D3V User's Manual Rev . 1001 1 2 ME-J 1 90 D3 V - 1 00 1 R ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 2

    Motherboard GA-J1900N-D3V Jan. 3, 2014 Jan. 3 , 2014 Motherboard GA- J1 90 0N - D3V Copyright © 2014 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Ch ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 3

    T able of Contents GA - J 190 0 N - D3V Mother board L ayout ............................................................................ 4 GA - J 190 0 N - D3V Mother board Bl ock D iagram ............................................................... 5 Chapter 1 Hardware Inst allation ............................................................. ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 4

    GA- J 1900N - D3V Mothe rb oard Layout Box Contents 5 GA-J1900N-D3V motherboard 5 Motherboard driver disk 5 T wo SA T A cables 5 User's Manual 5 I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. KB_MS SYS_F AN Inte ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 5

    GA- J 1 90 0N - D3 V Moth erboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." Line-Out (Front Speaker Out) MIC (Center/Subwoofer Speaker Out) Line-In (Rear Speaker Out) PS/2 KB/Mouse Intel ® J1900 SoC Dual BIOS DDR3L 1333 MHz Dual Channel Memory LPC Bus LPT 2 USB 2 ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 6

    - 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the ch ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 7

    - 7 - 1- 2 P roductSpe cications CPU  Built in with an Intel ® Celeron ® Quad-Core J1900 SoC (2.0 GHz) * Do not disassemble the onboard SoC and the heatsink by yourself to avoid damage to these components.  2 MB Cache Memory  2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory * If only one DDR3L memory module is ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 8

    - 8 - Internal Connectors  1 x parallel port header  1 x Clear CMOS jumper  1 x chassis intrusion header  1 x debug card header Back Panel Connectors  1 x PS/2 keyboard port  1 x PS/2 mouse port  1 x D-Sub port  1 x DVI-D port  2 x serial ports  4 x USB 3.0/2.0 ports  2 x RJ-45 ports  3 x audio jacks (Line In, Li ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 9

    - 9 - 1-3 Installing the Memor y Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) • Always tu ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 10

    - 10 - T o congure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver . Line In Jack (Blue) The line out jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line Out Jack (Green) ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 11

    - 1 1 - 1-6 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer . Unplug the power cord from the power outlet to prevent damage to the devices ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 12

    - 12 - 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components onthe motherboard. Before connecting the power connector , rst make sure thepower supply is turned off and all ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 13

    - 13 - Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 5) SA T A2 0/1 (SA T A 3Gb/s Connectors) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. 0 1 DEBUG PO RT G.QBOFM 7 1 S ATA 2 DEBUG PO RT G.QBOFM 7 1 6) F_P ANEL (Front Pa ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 14

    - 14 - 7) F_AUDIO (Front Panel Audio Header)  Thefrontpanel audio headersupports IntelHigh Denitionaudio (HD)and AC'97audio. Y oumay connect your chassis front panel audio module to this header . Make sure the wire assignments of the module connector match the pin assignments of the moth ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 15

    - 15 - 1 1) BA T (Battery)  Thebatteryprovides powertokeepthevalues(suchasBIOScongurations,date,andtimeinformation) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. Y ou may clea ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 16

    - 16 - 12) CLR_CMOS (Clear CMOS Jumper)  Use this jumper to clear the BIOS congurationand reset the CMOS values to factory defaults.T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. • Always turn off your computer and unplug the pow ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 17

    - 17 - BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows theusertomodifybasic ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 18

    - 18 - 2- 2 Main Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a s ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 19

    - 19 - 2-3 Advanced ` Intel(R) Smart Connect T echnology & ISCT Support Enables or disables Intel ® Smart Connect T echnology. (Default: Disabled) ` SuperIOConguration   This section provides information on the super I/O chip and allows you to congure the serial port and p ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 20

    - 20 - & ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled , the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. & Case Open Displays the detection status of the chassis intr ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 21

    - 21 - ` PPMConguration & EIST Enables or disables Enhanced Intel ® Speed Step T echnology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. (Default: Enabled) & CPU C state Report Enables or di ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 22

    - 22 - ` NetworkStackConguration & Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server . (Default: Disabled) & Ipv4 PXE Support  EnablesordisablesIPv4PXESupport.Thisitemiscongurableonlyw ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 23

    - 23 - & Other PCI devices Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers.  UEFIFirst   EnablesUEFIoptionROMrst.(Default)  Legacy only Enables legacy option ROM only .  Thisitemiscon ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 24

    - 24 - 2- 4 Chipset & Realtek LAN Controller / Realtek LAN 2 Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. ` North Bridge This section provides information on the installed memory size and memory/onbo ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 25

    - 25 - & High Precision Timer Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled) & Restore AC Power Loss Determines the state of the system after the return of power from an AC power loss.  Power Off The system stays off upon the return of the AC power . (Default)  Power On The system is ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 26

    - 26 - T o cancel the password, press <Enter> on the password item and when requested for the password, enter thecorrectonerst. Whenpromptedfora newpassword,press<Enter> withoutenteringanypassword. Press<Enter>againwhenpromptedtoconrm. & HDDSecurityC ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 27

    - 27 - & VGA Support Allows you to select which type of operating system to boot.  Auto Enables legacy option ROM only .  EFI Driver Enables EFI option ROM. (Default)  Thisitemiscongurableonlywhen Fast Boot is set to Enabled . & USB Support  Disabled All USB devices are disabled before the OS boot process co ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 28

    - 28 - & Save Changes and Reset Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Discard Changes and Reset Press <Enter> on this item and select Ye s . This exits the BIOS Setup without saving ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 29

    - 29 - Chapter 3 Appendix • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "T ap to ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 30

    - 30 - Regulator y Statement s Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of pr ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 31

    - 31 - FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ...

  • Gigabyte GA-J1900N-D3V (rev. 1.0) - page 32

    - 32 - Conta ct Us GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000, F AX: +886-2-8912-4005 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .gigabyte.com WEB address (Chinese): http://www .gigabyte.tw Y ...

Manufacturer Gigabyte Category Motherboard

Documents that we receive from a manufacturer of a Gigabyte GA-J1900N-D3V (rev. 1.0) can be divided into several groups. They are, among others:
- Gigabyte technical drawings
- GA-J1900N-D3V (rev. 1.0) manuals
- Gigabyte product data sheets
- information booklets
- or energy labels Gigabyte GA-J1900N-D3V (rev. 1.0)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Gigabyte GA-J1900N-D3V (rev. 1.0).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Gigabyte GA-J1900N-D3V (rev. 1.0), service manual, brief instructions and user manuals Gigabyte GA-J1900N-D3V (rev. 1.0). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Gigabyte GA-J1900N-D3V (rev. 1.0).

A complete manual for the device Gigabyte GA-J1900N-D3V (rev. 1.0), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Gigabyte GA-J1900N-D3V (rev. 1.0) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Gigabyte GA-J1900N-D3V (rev. 1.0).

A complete Gigabyte manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Gigabyte GA-J1900N-D3V (rev. 1.0) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Gigabyte GA-J1900N-D3V (rev. 1.0), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Gigabyte GA-J1900N-D3V (rev. 1.0), that we can find in the current document
3. Tips how to use the basic functions of the device Gigabyte GA-J1900N-D3V (rev. 1.0) - which should help us in our first steps of using Gigabyte GA-J1900N-D3V (rev. 1.0)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Gigabyte GA-J1900N-D3V (rev. 1.0)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Gigabyte GA-J1900N-D3V (rev. 1.0) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Gigabyte GA-J1900N-D3V (rev. 1.0)?

Use the form below

If you did not solve your problem by using a manual Gigabyte GA-J1900N-D3V (rev. 1.0), ask a question using the form below. If a user had a similar problem with Gigabyte GA-J1900N-D3V (rev. 1.0) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)