English dropdown-ico

Manual Tyan Computer B2094T15

55 pages 5.6 mb
Download

Go to site of 55

Summary
  • Tyan Computer B2094T15 - page 1

    1 http://www.TYAN.com Tr ansport GS10 / / / B2094T15 Revision 1.00 Copyright © TYAN Computer Corporation, 200 3 . All rights reserved. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp . All registered and unre gistered trademarks and company names contained in this manual are property of ...

  • Tyan Computer B2094T15 - page 2

    2 http://www.TYAN.com 0 Table of Contents Safety Precautions ................................................................................................ ........ 4 1 Introduc tion ................................................................................................ ....................... 5 1.1 Before You Begin ..................... ...

  • Tyan Computer B2094T15 - page 3

    3 http://www.TYAN.com 4 Configuring the System ................................ ................................ ................................ . 29 4.1 BIOS Setup Program ................................ ................................ ................................ .. 29 Starting BIOS Setup ................................................... ...

  • Tyan Computer B2094T15 - page 4

    4 http://www.TYAN.com Safety Precautions l Use the type of pow er indicated on the marking label. l Ensure electrical ci r cuits are not overloaded; consider the nameplate ratings of all the connected equipment and ensure you have over current protection. l D o not disable the power cord ground feature. This equipment was de signed to connect to a ...

  • Tyan Computer B2094T15 - page 5

    5 http://www.TYAN.com 1 Introduction This chapter introduces the features and functions of the product. 1.1 Before You Begin This manual provides hardware - related information of the s ystem for administrators who use i t to develop and host w eb sites. The ad ministrators should be familiar with operating systems and web brow s ers. Depending on ...

  • Tyan Computer B2094T15 - page 6

    6 http://www.TYAN.com Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future. 1.2 Product Description Congratulations on purchasing the system. It is a server appliance providing a dedicated web - hosting pl ...

  • Tyan Computer B2094T15 - page 7

    7 http://www.TYAN.com 1.3 Specifications NO TE: Specifications are subject to change without notice. Processor • Single s ocket 478 • Intel  Pentium 4 processor up to 3.06 GHz • Supports 400/533 MHz FSB Chipset • Intel 845E MCH • MCH + ICH - 4 • NS PC87366 Super I/O chip Memory • Dual channel memory bus • Two 184 - pin DDR DIMM s ...

  • Tyan Computer B2094T15 - page 8

    8 http://www.TYAN.com 1.4 System View Front View Ref Component Description Œ Power Button Turns the power on and off (soft - off). • Power Indicator Glows green when the power is on . Ž LAN1 Indicator Indicates an active network connection on LAN1 (external connection). • LAN2 Indicator Indicates an active network connection on LAN2 (internal ...

  • Tyan Computer B2094T15 - page 9

    9 http://www.TYAN.com Rear View Ref Component Description Œ Ventilation Openings Maintain proper operating temperature. Do not cover or block the openings. • Power Connector Connects the power cord . Ž Power Switch Turns the main power of the system on and off. • LAN 1 Connector C onnects the LAN ca ble for in ternal network connection . • ...

  • Tyan Computer B2094T15 - page 10

    ...

  • Tyan Computer B2094T15 - page 11

    11 http://www.TYAN.com 2 Cabinet Installation This chapte r , which is divided into two sections, provides instructions on the hardware installation of the system . System Assembly section illustrates how to assembl e each component of the system . Rack Mounting section describes the procedures for mounting the syste m into the rack. You can use th ...

  • Tyan Computer B2094T15 - page 12

    12 http://www.TYAN.com System Assembly Flowchart The following flowchart shows the basic procedures of syste m assembly: NOTE : Plea se wear anti - static gloves when handling electrical components and exercise caution during the installation process. For more information, contact your local dealer or an experience d technician . REPLACE A IR DUCT ...

  • Tyan Computer B2094T15 - page 13

    13 http://www.TYAN.com 2.1 S ystem Assembly When installing a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. Opening the Cover CAUTION: l Static electricity can destroy electronic devices. W henever you handle an option outside of its protective packaging, first discharge any sta ...

  • Tyan Computer B2094T15 - page 14

    14 http://www.TYAN.com 3. Locate the CPU socket and lift the socket arm up to the vertical position. Align the new CPU so its Pin 1 corner (beveled corner) is at the Pin 1 corner of the socket. 4. Insert the CPU pins into the socket. Press the arm downward to the horizontal position. You will feel some resistance while doing so. This is normal as t ...

  • Tyan Computer B2094T15 - page 15

    15 http://www.TYAN.com 5. Align the four points of the heatsink socke t and secure with four screws following a diagonal sequence . 6. Place the air duct back into place and secure with three screws. 7. Replace the cabinet cover. Installing System Memory Your system has two 184 - pin DIMM (Dual In - line Memory Module) sockets to sup port a maximum ...

  • Tyan Computer B2094T15 - page 16

    16 http://www.TYAN.com 3. To install the DIMM, make sure the retaining clips are in the unlocked position, then align the DIMM’s notched end with the socket’s corresponding end and firmly insert the DIMM into the socket. Finall y push the retaining clips inwards to lock the DIMM in place. 4. Replace the cabinet cover. Installing a Hard Disk Dri ...

  • Tyan Computer B2094T15 - page 17

    17 http://www.TYAN.com 3. Fit a hard disk drive to the bracket and secure with four screws. 4. Fit the bracket with the hard disk driv e back into place and secure with one screw. Connect the data cable and power cord. 5. Replace the cabinet cover. 6. You can create or rebuild RAID for the hard disk drive (see chapter 7 for information). Installing ...

  • Tyan Computer B2094T15 - page 18

    18 http://www.TYAN.com 2. Locate the PCI slot. 3. Firmly press the ris er card’s edge connector into the PCI slot. 4. Replace the cabinet cover. 2.2 Rack Mounting T he slide rackmount kit provides a sliding rackmount solution for the product . Slides enable optimal serviceability of the server from the front of the rack, including a ccessibility ...

  • Tyan Computer B2094T15 - page 19

    19 http://www.TYAN.com 2. Detach the inner slide from the outer slide by pressing on the release latch Œ and pulling apart the inner slide from the outer slide • . Do the same for the other slide. 3. Align the inner slide’s first round screwhole with the screwhole on the system chassis beside the mounting ears and attach the screw together wit ...

  • Tyan Computer B2094T15 - page 20

    20 http://www.TYAN.com Cabinet into the Rack Slide system cabinet Œ with the inner s lides previously installed into the inner rails of the outer slides attached to the rack and press on the release latch • until the front panel is aligned with the front edge of the rack. Locking Tab To prevent the system chassis from sliding on its rail s, secu ...

  • Tyan Computer B2094T15 - page 21

    21 http://www.TYAN.com 3 Setting Up the System This chapter tells you how to set up the s ystem for use. 3.1 System Requirements To use the s ystem, you need : l A 10Base - T, 10/100Base - TX, or 100Base - TX TCP/IP - based LAN l A computer connected to the network that uses a Web browser (Netscape Navigator or Microsoft Internet Explorer, version ...

  • Tyan Computer B2094T15 - page 22

    22 http://www.TYAN.com l The equipment is properly grounded. l Do not place any objects on top of the system. 3.3 Making the Connection 1. Connect one end of a Category 5 Ethernet cab le to the LAN1 connector on the system and the other end to the network socket that connects to the external network. 2. Connect one end of a Category 5 Ethernet cabl ...

  • Tyan Computer B2094T15 - page 23

    23 http://www.TYAN.com CAUTION: It is important to follow the proper power - down procedure for turning off the system. See section 3.6 in this chapter. 3.4 Configuring the System After you have made the networ k and power connections, you can configure the network settings using the LCD console . Before You Begin NOTE : To take advantage of the LC ...

  • Tyan Computer B2094T15 - page 24

    24 http://www.TYAN.com Setting the Configuration For Linux 1. Press the button according to the number of times specified on the following table, and you will see the correspo nding prompt . KEY PRESS PROMPT FUNCTION once (1) NIC1 IPADDR Change? E nter the IP address assigned to NIC 1 (Network Interface Card) twice (2) NIC1 NETMASK Change? E nter t ...

  • Tyan Computer B2094T15 - page 25

    25 http://www.TYAN.com For Windows 1. Press the button according to the number of times specified on the following table, and you will see the corresponding prompt . KEY PRE SS PROMPT FUNCTION once (1) NIC1 IPADDR Change? E nter the IP address assigned to NIC1 twice (2) NIC1 NETMASK Change? E nter the netmask of your network to NIC1 thrice (3) NIC1 ...

  • Tyan Computer B2094T15 - page 26

    26 http://www.TYAN.com Setting U p W ith the Web Browser The remainder of the setup process is performed through a Web browser (Netscape Navigator or Microsoft Internet Explorer, version 4.0 or later) on any client computer connected to the server. Dependi ng on your model, all the software may have been pre - installed by the manufacturer or deale ...

  • Tyan Computer B2094T15 - page 27

    27 http://www.TYAN.com For Windows Press the button seven times , and you will see the prompt: Shut down server? P ress the button and when the power is off, the power indicator turns off . 3.7 Linux RedHat Installation Notes Due to the compatibility limitation between Linux Red H at 7.3 (and up) and some type s of HDD, the following warning messag ...

  • Tyan Computer B2094T15 - page 28

    ...

  • Tyan Computer B2094T15 - page 29

    29 http://www.TYAN.com 4 Configuring the System 4.1 BIOS Setup Program BIOS Setup (SCU or Setup Configuration Utility) is a program for configuring the BIOS (Basic Input/Output Syste m) settings of the system. You need to run the BIOS Setup program when: l You see an error message on the screen requesting you to run Setup. l You want to restore the ...

  • Tyan Computer B2094T15 - page 30

    30 http://www.TYAN.com 2) Exits Setup. F9 Restores the Setup defaults. F10 Saves changes and exits Setup. Main Menu The Main menu contains the basic configuration settings of your system. System Time sets the system time (Hour, Minute, Second ) . System Date sets the system date (Day, Month, Year) . Primary/Secondary Master/Slave Each of these four ...

  • Tyan Computer B2094T15 - page 31

    31 http://www.TYAN.com Advanced Chips et Control Graphics Aperture sets the memory size of AGP VGA device. Enable Memory Gap enables or disables memory gap. USB 2.0 Controller enables or disables USB 2.0 controller. ECC Config allows you to enable or disable support for ECC - type of memory. Available only if you are using an ECC - type DDR - S DRA ...

  • Tyan Computer B2094T15 - page 32

    32 http://www.TYAN.com COM Port Addre ss if enabled, will use a port on the system board. Baud Rate enables the specified baud rate. Console Type enables the specified console type. Flow Control enables Flow Control. Console Connection indicates whether the console is connected directly t o the system or uses a modem to connect. Continue C.R. After ...

  • Tyan Computer B2094T15 - page 33

    33 http://www.TYAN.com Wake On LAN allows the system to wake up upon detection of any activity on the LAN. Power Button Behavior sets the desired system power state when the power button is pressed. Suspend Mode selects the type of Suspend mode. After Power Failure sets the mode of operation if there has been an AC power loss. Power Off causes the ...

  • Tyan Computer B2094T15 - page 34

    34 http://www.TYAN.com 4.2 Jumper Settings Jumpers provide a way to reconfigure the circuitry on the system board for specific need s. When you change the CPU or want to reset the BIOS configuration, you need to change the jumper settings. See the next figure for jumper locations and the table that follow for jumper definitions. CAUTION: Jumpers no ...

  • Tyan Computer B2094T15 - page 35

    35 http://www.TYAN.com 5 Installing Software Driver s You need to install the software drivers using the CD supplied with your system. The drivers are required for taking full advantage of its unique features. NOTE: The driver CD may have been updated after this User’s Manual was completed. If your CD is different from that described in this chap ...

  • Tyan Computer B2094T15 - page 36

    36 http://www.TYAN.com 5.2 Installation Instructions for Linux RedHat LCD Driver The LCD driver is required to enable your system to use the LCD panel to set the network, restart and shutdown the server . To in stall this driver, follow these steps: 1. Insert the driver CD into the CD drive. 2. Browse to the following directory: /mnt/cdrom/ and cre ...

  • Tyan Computer B2094T15 - page 37

    37 http://www.TYAN.com cd /LCD ./LCDdaemon. 6. To enable the LCD controller after system boot up, add the following into the file /etc/rd.local . cd /LCD ./LCDdaemon RAID (Redundant Arrays of Inexpensive Disks) Driver The RAID driver is required to enable your system to use R AID IDE devices. To install this driver, follow these steps: The files ar ...

  • Tyan Computer B2094T15 - page 38

    38 http://www.TYAN.com 2. At the "Welcome to RedHat Linux ..." installation screen, a prompt labeled " boot: " will appear at the bottom of the screen. 3. Press TAB and append the parameters at the " boot: " prompt, then press Enter . NOTE : Linux Kernel 2. 4.x will wrongly identify the Promise ATA RAID controller as a ...

  • Tyan Computer B2094T15 - page 39

    39 http://www.TYAN.com 1. Click the Gnome menu then click System Tools . 2. Select the Hardware Browser window and click Floppy Disks . 3. Obtain the USB floppy drive’s device file “ /dev/sdX ” where X can be a .. z . 4. Activate the floppy drive by using the dev ice file /dev/sdX . ...

  • Tyan Computer B2094T15 - page 40

    ...

  • Tyan Computer B2094T15 - page 41

    41 http://www.TYAN.com 6 Expanding the System You can expand the capabilities of the system by adding or upgrading internal devices . When install ing a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. 6.1 Opening the Cover CAUTION: l Static electricity can destroy electronic devic ...

  • Tyan Computer B2094T15 - page 42

    42 http://www.TYAN.com 6.2 Installing an Expansion Card Your system support s one PCI slot located on a riser card. You can install a PCI expansion card for addition al or enhanced functions. Follow this procedure to install an expansion card: 1. Before you purchase a PCI expansion card to add to the system, make sure that the card is less than 7 i ...

  • Tyan Computer B2094T15 - page 43

    43 http://www.TYAN.com NOTE : According to the standard X86 structure , there is only 128 k (C0000h - DFFFFh) shadow RAM for system option ROM. For this system, the RAID card option ROM engross es 64 k, the onboard A TI VGA card engross es 32 k, the onboard LAN engross es more than 10 k, so the remain ing space for option ROM is very limited. You m ...

  • Tyan Computer B2094T15 - page 44

    44 http://www.TYAN.com 3. Secure the hard disk drive to the bracket with four bottom screws. 4. Fit the bracket with the hard disk drive back into place and secure with one screw. 5. Connect one end of the data cable to the secondary IDE connector (see figure above ) and the other end to the rear of the hard disk drive. NOTE : Connect the data cabl ...

  • Tyan Computer B2094T15 - page 45

    45 http://www.TYAN.com 6.4 Adding a CD Drive (for test purpose) In case you need to use a CD drive with your system, follow this procedure. WARNING : You are advised not to make frequent connection and disconnection on the IDE connector as this might cause damage to the data cable and connector pins. CAUTION : Follow the instructions in this sectio ...

  • Tyan Computer B2094T15 - page 46

    46 http://www.TYAN.com NOTE : You cannot replace the cabinet cover with a CD drive installed. Restore the old connections after using the CD drive to be able to replace the cabinet cover. Without a Secondary Hard Disk Drive Installed 1. Remove the cabinet c over (see section 6.1 in this chapter ). 2. Connect one end of the data cable to the seconda ...

  • Tyan Computer B2094T15 - page 47

    47 http://www.TYAN.com 7 Using RAID 7.1 About RAID Depending on the model, your syst em may support RAID (Redundant Array of Inexpensive Disk). The purpose of RAID is to combine multiple small, inexpensive disk drives into an array of disk drives that appears to the system as a single logical storage device and yields performance exceeding that of ...

  • Tyan Computer B2094T15 - page 48

    48 http://www.TYAN.com 7.2 Creating an Array 1. Boot your system and when the following messages display on the screen, press Ctrl + F to run FastBuild Utility. MBFastTrak133 Lite ™ BIOS Version 2.00.0.XX © 19 95 - 2000 Promise Technology, Inc. All Rights Reserved. No array defined... Press <Ctrl - F> to enter FastBuild ™ Utility Or pres ...

  • Tyan Computer B2094T15 - page 49

    49 http://www.TYAN.com Creating an Array for Performance (RAID 0) 1. If you need performance instead of security, select Performance for the Optimize Array for item. 2. Depending on how you will be using your system, select A/V Editing , Server or Desktop for t he Typical Application usage item. 3. Press Ctrl + Y to save and create the array. 4. Re ...

  • Tyan Computer B2094T15 - page 50

    50 http://www.TYAN.com 3. Press Y for the Create and Duplicate option. The messages as shown next will appear asking you to select the Source drive to use. Source Disk Channel:ID Drive Model Capacity (MB) Target Disk Channel:ID Drive Model Capacity ( MB) [Please Select A Source Disk] Channel:ID Drive Model Capacity (MB) 1: Master QUANTUMCR8.4A 8063 ...

  • Tyan Computer B2094T15 - page 51

    51 http://www.TYAN.com 7.4 Changing the Array After you have created an array, you can delete or rebuild an array. Deleting an Array CAUTION: Deleting an existing disk array could result in data loss. Make sure to record all array inf ormation including the array type, the disk members, and stripe block size in case you need to undo a deletion. Del ...

  • Tyan Computer B2094T15 - page 52

    52 http://www.TYAN.com 6. Reboot the system and enter the FastBuild Utility main menu. 7. Select 5 to rebuild the array. FastBuild ™ Utility 1.xx © 199x - 200x Promise Technology, Inc. [Rebuild Array Menu] Array No RAID M ode Total Drv Capacity (MB) Status Array 1 Mirror 2 16126 Critical Array 2 —— —— —— —— Array 3 —— —— ...

  • Tyan Computer B2094T15 - page 53

    53 http://www.TYAN.com 8 Appendix Caution Texts Concerning Lithium Batteries DANISH ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftn ing må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt sam ...

  • Tyan Computer B2094T15 - page 54

    54 http://www.TYAN.com FRENCH ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Technical Support If a problem ari ...

  • Tyan Computer B2094T15 - page 55

    55 http://www.TYAN.com Notice for the USA Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rules Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received including i ...

Manufacturer Tyan Computer Category Network Card

Documents that we receive from a manufacturer of a Tyan Computer B2094T15 can be divided into several groups. They are, among others:
- Tyan Computer technical drawings
- B2094T15 manuals
- Tyan Computer product data sheets
- information booklets
- or energy labels Tyan Computer B2094T15
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tyan Computer B2094T15.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tyan Computer B2094T15, service manual, brief instructions and user manuals Tyan Computer B2094T15. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tyan Computer B2094T15.

Similar manuals

A complete manual for the device Tyan Computer B2094T15, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tyan Computer B2094T15 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tyan Computer B2094T15.

A complete Tyan Computer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tyan Computer B2094T15 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tyan Computer B2094T15, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tyan Computer B2094T15, that we can find in the current document
3. Tips how to use the basic functions of the device Tyan Computer B2094T15 - which should help us in our first steps of using Tyan Computer B2094T15
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tyan Computer B2094T15
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tyan Computer B2094T15 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tyan Computer B2094T15?

Use the form below

If you did not solve your problem by using a manual Tyan Computer B2094T15, ask a question using the form below. If a user had a similar problem with Tyan Computer B2094T15 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)