English dropdown-ico

Manual Renesas TFP-144

20 pages 0.45 mb
Download

Go to site of 20

Summary
  • Renesas TFP-144 - page 1

    H8S/2169 Series TFP-144 User System Interface Cable (HS2169ECN61H) for E6000 Emulator User’s Manual HS2169ECN61HE(B) ...

  • Renesas TFP-144 - page 2

    Cautions 1. Renesas neither warrants nor grants li censes of any rights of Renesas’s or any t hird party’s patent, copyright, t rademark, or other intel lect ual property rights for informat ion contained in this document. Renesas bears no responsibility fo r problem s that may arise with third party’s rights, including int ellectual property ...

  • Renesas TFP-144 - page 3

    i Preface Thank you for purchasing this user system interface cable (HS2169ECN61H) for the Renesas’s original mi crocomputer H8S/2169 series. The HS2169ECN61H is a user system interface cable that connects an H8S/2148 series E6000 emulator (HS2148EPI61H; hereinafter referred to as the emul ator) to the IC socket for a TFP-144 package and expansio ...

  • Renesas TFP-144 - page 4

    ii Contents Section 1 Configuration .................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connecting User System Interf ace Cable to Expansion I/O board ................................... 3 2.2 Connecting Us ...

  • Renesas TFP-144 - page 5

    Section 1 Configuration CAUTION Use an NQPACK144SE socket (manufactured by Tokyo Eletech Corporation) for the TFP-144 package IC socket on the user system. Figure 1 shows the configuration of the HS2169E CN61H user system interface cable for the TFP-144 package. Figure 1 HS2169ECN61H User System Interface Cable 1 ...

  • Renesas TFP-144 - page 6

    2 Table 1 lists t he HS2169ECN61H components. Please m ake sure you have all of these com ponents when unpacking. Table 1 HS2169ECN61H Components No. Component Quantity Remarks 1 Cable body 1 Flat cable 2 Cable head 1 3 IC socket 1 For the TFP-144 package 4 Socket cover 1 For installing an TFP-144 packaged MCU 5 Screws (M2.0 x 10 mm) 4 For fastenin ...

  • Renesas TFP-144 - page 7

    Section 2 Connection Procedures 2.1 Connecting User System Interface Cable to Expansion I/O board W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and w ill damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user syste ...

  • Renesas TFP-144 - page 8

    Emulator station Expansion I/O board E6000 Cable body connector User system interface cable USER I N TER FA C E CAB L E6 0 0 0 E M UL A T O E6000 Figure 2 Connecting User System Int erface Cable to Expansion I/O Board 4 ...

  • Renesas TFP-144 - page 9

    2.2 Connecting User System Interface Cable to User System W ARNING Always switch OFF the user system and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part. Before connecting, make sure that pin 1 on both sides are correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage the ...

  • Renesas TFP-144 - page 10

    Use the guide pins provided to determ ine where to install t he IC socket, as shown in figure 3. User system IC socket (NQPACK100SE manufactured by Tokyo Eletech Corporation) Guide pins 4 projections to apply epoxy resin adhesive to Bottom view of IC socket Pin 1 Figure 3 Location Setting of IC Socket 2.2.2 Soldering IC Socket After fastening, sold ...

  • Renesas TFP-144 - page 11

    7 2.2.3 Inserting Cable Head CAUTION Check the location of pin 1 before inserting. Align pin 1 on the IC socket for an TFP-144 package on t he user system wit h pin 1 on the user system interface cable head, and inse rt the user system interface cable head into the IC socket on the user system, as shown i n figure 4. 2.2.4 Fastening Cable Head CAUT ...

  • Renesas TFP-144 - page 12

    Fasten the user system interface cable head to the IC socket fo r an TFP-144 package on the user system wit h the four screws (M2.0 x 10 m m) provided. Each screw should be tightened a little at a time, alternating between screws on opposi ng corners. Take special care, such as manually securing the IC socket soldered area, to prevent the soldered ...

  • Renesas TFP-144 - page 13

    2.2.5 Fastening Cable Body Connect the cable body to the cable head. Cable body Cable head Unfastening jig Push the unfastening jig Removing User system Figure 5 Fastening Cable Body 9 ...

  • Renesas TFP-144 - page 14

    2.3 Recommended Dimensions for User System Mount Pad Figure 5 shows t he recomm ended dim ensions for the mount pad (footprint) for the user system with an IC socket for an TFP-144 package (NQPACK144SE: m anufactured by Tokyo Eletech Corporation). Not e that the dimensions in figure 6 are somewhat different from those of t he actual chip's m o ...

  • Renesas TFP-144 - page 15

    2.4 Dimensions for User System Interface Cable Head The dimensions for the user system interf ace cable head are shown in figure 7. Figure 7 Dimensions for User System Interface Cable Head 11 ...

  • Renesas TFP-144 - page 16

    2.5 Resulting Dimensions after Connecting User System Interface Cable The resulting dimensions, after conn ecting the user system interface cab le head to the user system, are shown in figure 8. Figure 8 Resulting Dimensions after Connecting User System Interface Cable 12 ...

  • Renesas TFP-144 - page 17

    13 Section 3 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use a screwdriver w hose head matches the screw head. 3. The tightening torque must be 0.054 N•m or less. If the applied torque cannot be accurately measured, stop tightening when the force required to turn the screw becomes significantl ...

  • Renesas TFP-144 - page 18

    Figure 9 Installing MCU to User System 14 ...

  • Renesas TFP-144 - page 19

    Section 4 Verifying Operation 1. When using the E6000 emulator for the H8S/2148 series, turn on the emulator according to the procedures described in the H8S Series E6000 Em ulator User's Manual (HS2000EPI61HE). 2. Verify the user system interface cable connec tions by accessing the exte rnal m emory and ports to check the bus states of the pi ...

  • Renesas TFP-144 - page 20

    Section 5 Notice 1. Make sure that pin 1 on the user syst em IC socket is correct ly aligned with pin 1 on t he cable head before inserting the cable head into the user system IC socket. 2. The dimensions of t he recommended m ount pad for the user system IC socket are different from those of the MCU. 3. To avoid breaking wires in the cable body, d ...

Manufacturer Renesas Category Computer Hardware

Documents that we receive from a manufacturer of a Renesas TFP-144 can be divided into several groups. They are, among others:
- Renesas technical drawings
- TFP-144 manuals
- Renesas product data sheets
- information booklets
- or energy labels Renesas TFP-144
All of them are important, but the most important information from the point of view of use of the device are in the user manual Renesas TFP-144.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Renesas TFP-144, service manual, brief instructions and user manuals Renesas TFP-144. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Renesas TFP-144.

Similar manuals

A complete manual for the device Renesas TFP-144, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Renesas TFP-144 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Renesas TFP-144.

A complete Renesas manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Renesas TFP-144 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Renesas TFP-144, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Renesas TFP-144, that we can find in the current document
3. Tips how to use the basic functions of the device Renesas TFP-144 - which should help us in our first steps of using Renesas TFP-144
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Renesas TFP-144
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Renesas TFP-144 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Renesas TFP-144?

Use the form below

If you did not solve your problem by using a manual Renesas TFP-144, ask a question using the form below. If a user had a similar problem with Renesas TFP-144 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)