Manual Audiovox PRO-9649a

10 pages 0.3 mb
Download

Go to site of 10

Summary
  • Audiovox PRO-9649a - page 1

    128-6615 1 of 10 Model PRO-9649a Installation Manual SELECT ABLE FEA TURES Note: The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual. Note: When both Passive Arming a ...

  • Audiovox PRO-9649a - page 2

    128-6615 2 of 10 Page 2 Fourth Press and release the valet switch 3 chirps = headlight output when arming and disarming Press transmitter Lock button to change 4 chirps = headlight output off Press transmitter Lock button to change 1 chirp = headlight output when arming Press transmitter Lock button to change 2 chirps = headlight output when disarm ...

  • Audiovox PRO-9649a - page 3

    128-6615 3 of 10 Page 3 If during the program sequence receiver channel 1 is programmed, and received channel 2 is skipped over , as indicated in the transmitted program guide, then the unit will operate as a single button lock/unlock unit from that transmitter . It is possible to have one transmitter programmed for single button lock/unlock, and o ...

  • Audiovox PRO-9649a - page 4

    128-6615 4 of 10 Page 4 Whichever mounting method is selected, make certain that the sensitivity adjustment is accessible for use later in the installation. WIRING THE SYSTEM Large 10 Pin Edge Connector: Red/White (5Amp) & Red (15Amp) Fused Wires: +12 VDC Constant Battery Source This wire controls the sensitivity of the voltage sensing circuit, ...

  • Audiovox PRO-9649a - page 5

    128-6615 5 of 10 Page 5 Orange Wire: 300 mA Ground Output When Armed - N. C. Starter Disable This wire is provided to control the starter cut relay . Connect the orange wire to terminal 86 of the relay . Connect relay terminal 85 to an ignition wire in the vehicle that is live when the key is in the on and crank positions, and off when the key is i ...

  • Audiovox PRO-9649a - page 6

    128-6615 6 of 10 Page 6 Note: This is a normally opened starter cut arrangement, and when power is removed from the security system, the starter disable feature will remain operational, and the vehicle will not start. Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the starting circuit of the vehicle. Dark ...

  • Audiovox PRO-9649a - page 7

    128-6615 7 of 10 Page 7 2 Pin White Connector: Dash Mounted LED Route the red and blue wires in the 2 pin white connector from the LED to the control module, and plug it into the mating white connector on the side of the module. 4 Pin White Connector: Shock Sensor Route the red, black, green and blue wires in the 4 pin white connector from the shoc ...

  • Audiovox PRO-9649a - page 8

    128-6615 8 of 10 Page 8 Next, locate the drivers door unlock motor wire and cut it at a convenient location to allow wiring of the White and Dark Blue wires. Dark Blue will connect to the vehicle side of the cut wire and White will connect to the "Unlock Drivers Door Motor" side of the cut wire. Most vehicles door lock/unlock motor legs r ...

  • Audiovox PRO-9649a - page 9

    128-6615 9 of 10 Page 9 COMPLETING THE INST ALLA TION NOTE: This unit has the ability to learn the dome light delay time, up to 60 seconds. If the vehicle has delay interior lights, and you wish to avoid three chirp, defect zone, indication normally associated with this type of interior light, we suggest you learn the interior light delay . T o lea ...

  • Audiovox PRO-9649a - page 10

    128-6615 10 of 10 © 2003 Audiovox Electronic Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-6615 ...

Manufacturer Audiovox Category Automobile Alarm

Documents that we receive from a manufacturer of a Audiovox PRO-9649a can be divided into several groups. They are, among others:
- Audiovox technical drawings
- PRO-9649a manuals
- Audiovox product data sheets
- information booklets
- or energy labels Audiovox PRO-9649a
All of them are important, but the most important information from the point of view of use of the device are in the user manual Audiovox PRO-9649a.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Audiovox PRO-9649a, service manual, brief instructions and user manuals Audiovox PRO-9649a. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Audiovox PRO-9649a.

Similar manuals

A complete manual for the device Audiovox PRO-9649a, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Audiovox PRO-9649a by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Audiovox PRO-9649a.

A complete Audiovox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Audiovox PRO-9649a - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Audiovox PRO-9649a, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Audiovox PRO-9649a, that we can find in the current document
3. Tips how to use the basic functions of the device Audiovox PRO-9649a - which should help us in our first steps of using Audiovox PRO-9649a
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Audiovox PRO-9649a
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Audiovox PRO-9649a in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Audiovox PRO-9649a?

Use the form below

If you did not solve your problem by using a manual Audiovox PRO-9649a, ask a question using the form below. If a user had a similar problem with Audiovox PRO-9649a it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (1)

Владимир

Нет звука CD. Диск читает. Tuner OK