Русский dropdown-ico

Инструкция обслуживания HP (Hewlett-Packard) Ski Simulator

110 страниц 1.46 mb
Скачать

Перейти на страницу of 110

Summary
  • HP (Hewlett-Packard) Ski Simulator - page 1

    Ski IA-64 Sim ulator Reference Man ual Rev . 1.0L (26 Apr 00) Copyright © 2000 He wlett-Pac kard Co. ...

  • HP (Hewlett-Packard) Ski Simulator - page 2

    ii Notice Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Notice The information in this document is subject to change without notice. HEWLETT -P A CKARD MAKES NO W ARRANTY OF ANY KIND WITH REGARD T O THIS MA TERIAL, INCLUD- ING, BUT NO T LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ...

  • HP (Hewlett-Packard) Ski Simulator - page 3

    Copyright © 2000 He wlett-Pac kard Co. Preface iii Ski IA-64 Simulator Ref erence Manual 1.0L Preface This document is the Ski IA-64 Simulator Reference Manual. The goal of this document is to provide a description of the features, commands, and simulation en vironment provided by the Ski IA-64 simulator . The version of the simulator described he ...

  • HP (Hewlett-Packard) Ski Simulator - page 4

    iv Syntax Con ventions Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L italic + A plus sign applied to an argument indicates that the ar gument must be supplied one or more times, as in the Appen- dix A, “Command Reference” description of the eval command: eval expr ession_without_spaces +. [ italic ]+ A plus ...

  • HP (Hewlett-Packard) Ski Simulator - page 5

    Copyright © 2000 He wlett-Pac kard Co. T able of Contents v Ski IA-64 Simulator Ref erence Manual 1.0 T able of Contents 1 Getting Started: A Ski Tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 The Ski Simulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Ski Simulator - page 6

    vi T able of Contents Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0 4.1 Command Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4.2 Command Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4.3 Comm ...

  • HP (Hewlett-Packard) Ski Simulator - page 7

    Copyright © 2000 He wlett-Pac kard Co. T able of Contents vii Ski IA-64 Simulator Ref erence Manual 1.0 8.7.1 Summary of Symbol Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8 9 Command Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 9.1 Initiali ...

  • HP (Hewlett-Packard) Ski Simulator - page 8

    viii T able of Contents Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0 ...

  • HP (Hewlett-Packard) Ski Simulator - page 9

    Copyright © 2000 He wlett-Pac kard Co. List of Figures ix Ski IA-64 Simulator Ref erence Manual 1.0L List of Figures Figure 1-1. Starting xski From the Command Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Figure 1-2. The Four Primary xski Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Ski Simulator - page 10

    x List of Figures Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L Figure 8-1. The Original Program Loaded in ski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Figure 8-2. The Program After Assigning a String in ski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Figure 8-3 ...

  • HP (Hewlett-Packard) Ski Simulator - page 11

    Copyright © 2000 He wlett-Pac kard Co. List of T ables xi Ski IA-64 Simulator Ref erence Manual 1.0L List of T ables Table 4-1. Ski Simulator Arithmetic and Logic Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Table 7-1. Linux System Calls Supported by Ski . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HP (Hewlett-Packard) Ski Simulator - page 12

    xii List of T ables Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 13

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-1 Ski IA-64 Simulator Ref erence Manual 1.0L 1 Getting Star ted: A Ski T utorial In this chapter , you learn how to use Ski by e xecuting a brief tutorial. At the end of the tutorial, you will learn where to look in this manual for detailed descriptions of Ski’ s operation ...

  • HP (Hewlett-Packard) Ski Simulator - page 14

    1-2 Getting Started: A Ski T utorial Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Figure 1-1. Starting xski From the Command Line ...

  • HP (Hewlett-Packard) Ski Simulator - page 15

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-3 Ski IA-64 Simulator Ref erence Manual 1.0L 1.2.2 Exiting Ski Y ou can quit xski and this tutorial with the Quit button, with the File->Quit menu selection, or with the “ quit ” com- mand. All are in the Main W indow . (Don’t quit now; you are just be ginning!) 1.2 ...

  • HP (Hewlett-Packard) Ski Simulator - page 16

    1-4 Getting Started: A Ski T utorial Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Figure 1-3. Loading the “ hello ” Program Figure 1-4. The xski Program Windo w ...

  • HP (Hewlett-Packard) Ski Simulator - page 17

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-5 Ski IA-64 Simulator Ref erence Manual 1.0L 1.2.4 Inspecting Data T o look at the argv and envp strings, you need to use the Data Windo w . Linux passes argc , argv , and envp on the mem- ory stack ( r12 ). T o look at this memory area, use the “ dj ” command (“ d ata ...

  • HP (Hewlett-Packard) Ski Simulator - page 18

    1-6 Getting Started: A Ski T utorial Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L type “ dj r12 ”o r“ dj 9ffffffffff780 ”, as shown in Figure 1-7 and the Data W indow changes to display the hexadec- imal data stored at the location, as sho wn in Figure 1-8. Find the v alue of r12 in your program and use ...

  • HP (Hewlett-Packard) Ski Simulator - page 19

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-7 Ski IA-64 Simulator Ref erence Manual 1.0L character strings of argv and envp . (In a moment, you’ll learn ho w to see data in ASCII translation.) T yping hexadecimal numbers is error-prone, and Ski pro vides several shortcuts to av oid it. The first is xski ’ s Comma ...

  • HP (Hewlett-Packard) Ski Simulator - page 20

    1-8 Getting Started: A Ski T utorial Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Another shortcut is the * pointer-dereference operator for indirect addressing. T ype “ dj 0 ” to jump the Data W indow to location 0. Then type “ dj *(r12+18) ”. Ski will take the contents of r12 ( 9ffffffffff780 , rememb ...

  • HP (Hewlett-Packard) Ski Simulator - page 21

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-9 Ski IA-64 Simulator Ref erence Manual 1.0L 1.2.7 Viewing Sour ce Code Mixed In with Assembl y Code The Program W indow sho ws the C source code intermixed with the IA-64 assembly code. Y ou can turn the source code Figure 1-12. Jumping the Pr ogram Window to the Beginning ...

  • HP (Hewlett-Packard) Ski Simulator - page 22

    1-10 Getting Started: A Ski T utorial Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L display of f or on using the pa (“ p rogram a ssembly”) and pm (“ p rogram m ixed”) commands, respecti vely . Mixed code dis- play only works if you ha ve the source code to the program av ailable to Ski; the source code ...

  • HP (Hewlett-Packard) Ski Simulator - page 23

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-11 Ski IA-64 Simulator Ref erence Manual 1.0L 1.2.9 Running a Program T o run your program, type the “ run ” command or click the Run button in the Main W indow . Ski will start the simulation and connect the program’ s standard I/O ports (stdin, stdout, and stderr) to ...

  • HP (Hewlett-Packard) Ski Simulator - page 24

    1-12 Getting Started: A Ski T utorial Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 1.2.10 Single-stepping a Pr ogram T o try single-stepping (and no, this is not a kind of ethnic dance), set a breakpoint at main+10 . Then use the “ run ” com- mand or Run button to simulate the program up to the breakpoint. ...

  • HP (Hewlett-Packard) Ski Simulator - page 25

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-13 Ski IA-64 Simulator Ref erence Manual 1.0L the Main W indow . Ski tells you why it stopped and gives you statistics about program e xecution up to this point, as you can see in Figure 1-18. The Program W indow marks the next instruction to be fetched with a greater-than s ...

  • HP (Hewlett-Packard) Ski Simulator - page 26

    1-14 Getting Started: A Ski T utorial Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L By changing the v alue of the ip register , you can change where in the program Ski will resume simulation. Enter the com- mand “ = ip main+20 ” in the Main W indow and observ e the first line of the first pane in the Regis ...

  • HP (Hewlett-Packard) Ski Simulator - page 27

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-15 Ski IA-64 Simulator Ref erence Manual 1.0L Changing registers isn’ t enough to debug most programs, ho wev er . Often, you need to change values in memory as well. Ski provides se veral commands for this, dif fering in whether they modify one-byte chunks, two-byte chunk ...

  • HP (Hewlett-Packard) Ski Simulator - page 28

    1-16 Getting Started: A Ski T utorial Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L Next, issue the command “ =s _IO_stdin_used+8 Ski!Ski!Ski! ” in the Main W indo w . (Y ou may need to left-click in the Main W indow to mak e it activ e.) Observe how the Data W indow changes: the he xadecimal values at, and ...

  • HP (Hewlett-Packard) Ski Simulator - page 29

    Copyright © 2000 He wlett-Pac kard Co. Getting Started: A Ski T utorial 1-17 Ski IA-64 Simulator Ref erence Manual 1.0L 1.2.12 Getting Help T o see what commands are available, type “ help ” in the Main W indow or use the Help->Commands menu selection. T o see the syntax of a specific command, type “ help ” follo wed by the command nam ...

  • HP (Hewlett-Packard) Ski Simulator - page 30

    1-18 Getting Started: A Ski T utorial Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 31

    Copyright © 2000 He wlett-Pac kard Co. Overview 2-1 Ski IA-64 Simulator Ref erence Manual 1.0L 2 Overview 2.1 Intr oduction The Ski simulator is a software package designed to functionally simulate the IA-64 processor architecture at the instruc- tion le vel. Ski offers an informati ve, screen-oriented machine state display and a friendly , powerf ...

  • HP (Hewlett-Packard) Ski Simulator - page 32

    2-2 Overview Copyright © 2000 Hewlett-P ac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L 2.4 Ski V ariations The simulator is av ailable in three v arieties, distinguished by their user interfaces: ski , xski , and bski . The underlying simulation engine is identical across all three v arieties. The figures below sho w how each v ariety loo ...

  • HP (Hewlett-Packard) Ski Simulator - page 33

    Copyright © 2000 He wlett-Pac kard Co. Overview 2-3 Ski IA-64 Simulator Ref erence Manual 1.0L Figure 2-2. The X Window System, Motif-based xski Interface ...

  • HP (Hewlett-Packard) Ski Simulator - page 34

    2-4 Overview Copyright © 2000 Hewlett-P ac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L 2.5 Star ting Ski T o start the Ski simulator, type its name ( ski , xski ,o r bski ) and any necessary command line options and file redirec- tions, just as you would start an y other Linux program. (Command line options are described in Section 2.5.1, ...

  • HP (Hewlett-Packard) Ski Simulator - page 35

    Copyright © 2000 He wlett-Pac kard Co. Overview 2-5 Ski IA-64 Simulator Ref erence Manual 1.0L standard Linux fashion. The Ski command line syntax is sho wn below . The -i , -rest , -icnt , and -stats flags can appear in any order . ski [ -help ] [ -i filename ] [ -rest filename ] [ pr ogr am_filename [ args ]+] xski [ -help ] [ -noconsole ] [ ...

  • HP (Hewlett-Packard) Ski Simulator - page 36

    2-6 Overview Copyright © 2000 Hewlett-P ac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L 2.6 Quitting Ski The quit command causes the simulator to exit. If a numeric operand or e xpression is supplied, the value is returned to the shell as Ski’ s exit status. This can be particularly useful with bski and command files (see Chapter 9, “C ...

  • HP (Hewlett-Packard) Ski Simulator - page 37

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-1 Ski IA-64 Simulator Ref erence Manual 1.0L 3 Screen Presentation 3.1 Ski’ s Use of Windows xski and ski generally divide the screen into four windo ws. ( bski doesn’t create an y windows because it has no user interface, only a command line interface.) xski uses Motif windows which ...

  • HP (Hewlett-Packard) Ski Simulator - page 38

    3-2 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ski shows only a portion of a re gister set at a time and you use the commands described in Section 5.1, “Register W indow Commands” to select which portion of which set to see. The sets are described belo w in the order they appear in the ...

  • HP (Hewlett-Packard) Ski Simulator - page 39

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-3 Ski IA-64 Simulator Ref erence Manual 1.0L 3.2.2 The General Registers P ane The general registers pane sho ws the current values of the 64-bit general (inte ger) data registers, four to a line, in hexadec- imal. Registers whose corresponding NaT bits are set are displayed with a leadi ...

  • HP (Hewlett-Packard) Ski Simulator - page 40

    3-4 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 3.2.4 The System Registers P ane The system registers pane sho ws the Processor Status Register ( psr ), Control Re gisters, Region Registers ( rr0 - rr7 ), Pro- tection K ey Registers ( pkr0 - pkr15 ), Data Breakpoint Re gisters ( dbr0 - dbr1 ...

  • HP (Hewlett-Packard) Ski Simulator - page 41

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-5 Ski IA-64 Simulator Ref erence Manual 1.0L 3.3 Resizing Register Window P anes with xski As mentioned abov e, ev en a large X W indow System screen is too small to display all the re gisters simultaneously , so you may hav e to scroll a pane to see the registers you want, or resize the ...

  • HP (Hewlett-Packard) Ski Simulator - page 42

    3-6 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 3.5 The Pr ogram Window The Program W indow pro vides a view into the program space. Whether you load a program into the simulated processor’ s address space via the command line or using Ski’ s load , iaload ,o r romload commands, the pro ...

  • HP (Hewlett-Packard) Ski Simulator - page 43

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-7 Ski IA-64 Simulator Ref erence Manual 1.0L instruction in the bundle. The end of each instruction group (a unit of potentially parallel e xecution) is marked with a pair of semicolons (“ ;; ”) after the last operand of the last instruction in the group. Ski uses the first few colu ...

  • HP (Hewlett-Packard) Ski Simulator - page 44

    3-8 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 3.5.2 IA-32 Instruction Display IA-32 instructions are displayed as shown in Figure 3-11, according to the con ventions for Intel assembly code. As with IA-64 instruction display , Ski uses the first column of each assembly language instructi ...

  • HP (Hewlett-Packard) Ski Simulator - page 45

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-9 Ski IA-64 Simulator Ref erence Manual 1.0L 3.5.3 Changing the Range of Locations Shown in the Pr ogram Window xski doesn’t place a scroll bar in the Program W indo w . Instead, like ski , xski provides the pf and pb commands, described in Section 5.2, “Program W indow Commands”. ...

  • HP (Hewlett-Packard) Ski Simulator - page 46

    3-10 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 3.6 The Data Window In the Data W indow , xski and ski present data in hexadecimal format, sixteen bytes to a line, as sho wn in Figure 3-14. The data are displayed as four groups of eight hexadecimal digits each, with an ASCII character tran ...

  • HP (Hewlett-Packard) Ski Simulator - page 47

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-11 Ski IA-64 Simulator Ref erence Manual 1.0L which may change by the time the simulated IA-64 processor actually loads the bytes.) The address is expressed as a sym- bol from the ex ecutable file’ s symbol table or as a sixteen digit hexadecimal number . W ith the dbndl command, Ski ...

  • HP (Hewlett-Packard) Ski Simulator - page 48

    3-12 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 3.6.2 In v alid Code and the Data Window If you tell Ski to display non-existent memory , Ski will display x ’ s instead, as sho wn in Figure 3-14. Non-e xistent mem- ory is defined for the Data W indow similarly to its definition for the ...

  • HP (Hewlett-Packard) Ski Simulator - page 49

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-13 Ski IA-64 Simulator Ref erence Manual 1.0L 3.7.2 The ski Command Window ski ’ s Command Windo w is simpler , as shown in Figure 3-17. There are no menus, buttons, or Command History . Instead, you enter commands when you see a * prompt in the 4-line Command W indo w at the bottom of ...

  • HP (Hewlett-Packard) Ski Simulator - page 50

    3-14 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 3.8 Other Windows Some commands, such as help , isyms , and symlist , cause xski and ski to create additional windo ws. When xski cre- ates an additional windo w , it adds scroll bars if there is more information than will fit. As an example ...

  • HP (Hewlett-Packard) Ski Simulator - page 51

    Copyright © 2000 He wlett-Pac kard Co. Screen Presentation 3-15 Ski IA-64 Simulator Ref erence Manual 1.0L Figure 3-18. xski ’ s Symbol List Window ...

  • HP (Hewlett-Packard) Ski Simulator - page 52

    3-16 Screen Presentation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 53

    Copyright © 2000 He wlett-Pac kard Co. Command Language 4-1 Ski IA-64 Simulator Ref erence Manual 1.0L 4 Command Language The Ski command language is simple, ef ficient, and easy to learn. It consists of commands you can inv oke from the ke y- board or from a command file (see Chapter 9, “Command Files”). Each command is giv en with an appro ...

  • HP (Hewlett-Packard) Ski Simulator - page 54

    4-2 Command Language Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L the commands “ step 100 ” and “ eval my_buffer ”. This pair of commands would e xecute one hundred instructions and then print the value of (your) v ariable named “ my_buffer ”. By combining these two commands into one command sequenc ...

  • HP (Hewlett-Packard) Ski Simulator - page 55

    Copyright © 2000 He wlett-Pac kard Co. Command Language 4-3 Ski IA-64 Simulator Ref erence Manual 1.0L As an example, in xski , eval 64 0d64 0o64 0b100000 *main ~(((0D1234+0X10EF0)*4)<<6)+0B10001001 prints the v alues of the six expressions in the Main W indow , as shown in Figure 4-1. The first expression is taken as a hexadecimal number , ...

  • HP (Hewlett-Packard) Ski Simulator - page 56

    4-4 Command Language Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 4.4.1.3 Addresses An address is specified by a 64 bit hexadecimal number . For example, the command pj 1000 repositions (“jumps”) the Program W indow to address 0x1000. As discussed in Section 6.1, “ Application-Mode and Sys- tem-Mode Simu ...

  • HP (Hewlett-Packard) Ski Simulator - page 57

    Copyright © 2000 He wlett-Pac kard Co. Command Language 4-5 Ski IA-64 Simulator Ref erence Manual 1.0L assigns the v alue contained in the ip register to general register 31. (F or a description of the = command, see Section 8.1, “Changing Registers and Memory with Assignment Commands”.) Where ver the simulator e xpects you to supply a numeric ...

  • HP (Hewlett-Packard) Ski Simulator - page 58

    4-6 Command Language Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L first in its symbol tables for program-defined symbols and internal variables (which includes re gister names). If a match is found, the matching v alue is used, otherwise the character sequence is taken as a number . Y ou can force the numeric ...

  • HP (Hewlett-Packard) Ski Simulator - page 59

    Copyright © 2000 He wlett-Pac kard Co. Screen Manipulation Commands 5-1 Ski IA-64 Simulator Ref erence Manual 1.0L 5 Screen Manipulation Commands Ski provides se veral commands to manipulate windo ws. These commands let you make major changes of context or fine adjustments. xski provides more fle xibility: you can change the location and size of ...

  • HP (Hewlett-Packard) Ski Simulator - page 60

    5-2 Screen Manipulation Commands Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L Displays the IA-32 ( eax , ebx , esp , etc.) registers in the Re gister W indow . sr Displays the system registers ( cr , rr , pkr , dbr , ibr , pmc , and pmd ) in the Register W indo w . ur Displays the user registers ( pr , br , ar ...

  • HP (Hewlett-Packard) Ski Simulator - page 61

    Copyright © 2000 He wlett-Pac kard Co. Screen Manipulation Commands 5-3 Ski IA-64 Simulator Ref erence Manual 1.0L pm Display the program being simulated in its source code form with the assembly language translation mixed in, as shown in Figure 5-2. The source code display is for your con venience only; you cannot interact with the source code, e ...

  • HP (Hewlett-Packard) Ski Simulator - page 62

    5-4 Screen Manipulation Commands Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L pd starting_addr ess ending_addr ess [ filename ] Dump the assembly language translation of the program in the area between the two addresses (inclusi ve) to the screen ( ski ) or to a windo w ( xski )i fn o filename is giv en, or t ...

  • HP (Hewlett-Packard) Ski Simulator - page 63

    Copyright © 2000 He wlett-Pac kard Co. Screen Manipulation Commands 5-5 Ski IA-64 Simulator Ref erence Manual 1.0L 5.3 Data Window Commands The Data W indow displays an area of memory in he xadecimal format and, if the window is wide enough, an ASCII trans- lation. (See Section 3.6, “The Data W indow”.) The commands to adjust the Data W indow ...

  • HP (Hewlett-Packard) Ski Simulator - page 64

    5-6 Screen Manipulation Commands Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L dd starting_addr ess ending_addr ess [ filename ] Dump the memory area between the two addresses (inclusi ve) to the screen ( ski ) or windo w ( xski )i fn o filename is gi ven or to the specified file if one is. The dump will be ...

  • HP (Hewlett-Packard) Ski Simulator - page 65

    Copyright © 2000 He wlett-Pac kard Co. Program Sim ulation 6-1 Ski IA-64 Simulator Ref erence Manual 1.0L 6 Pr ogram Simulation Ski’ s main responsibility is to simulate IA-64 instructions and programs built from these instructions. Many commands and features are supplied to provide you with a great deal of fle xibility in using Ski. 6.1 Applic ...

  • HP (Hewlett-Packard) Ski Simulator - page 66

    6-2 Program Sim ulation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L 6.3.1 System-Mode IA-64 Programs A system-mode IA-64 program “sees” a more complete simulated en vironment: writeable registers are initialized to zero, page and TLB faults are simulated and cause a transfer to the interruption v ector tab ...

  • HP (Hewlett-Packard) Ski Simulator - page 67

    Copyright © 2000 He wlett-Pac kard Co. Program Sim ulation 6-3 Ski IA-64 Simulator Ref erence Manual 1.0L 6.4 Misaligned Data Access T rap If the psr .ac bit is set, the IA-64 architecture requires alignment checks on memory accesses; i.e., when data accesses are made to items larger than a byte, the appropriate number of lo w-order address bits m ...

  • HP (Hewlett-Packard) Ski Simulator - page 68

    6-4 Program Sim ulation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L example is “ xski my_program ”. The second way is to use the load , iaload ,o r romload commands, which take the filename as the first argument, for e xample, “ load my_program ”. 6.5.2 Summary of Program Loading Commands load filen ...

  • HP (Hewlett-Packard) Ski Simulator - page 69

    Copyright © 2000 He wlett-Pac kard Co. Program Sim ulation 6-5 Ski IA-64 Simulator Ref erence Manual 1.0L 6.6 Pr ogram Execution Programs may be run in their entirety without interruption, they may be stopped at appropriate places (see Section 8.3, “Program Breakpoints”) and continued, or they may be single-stepped for deb ugging purposes. The ...

  • HP (Hewlett-Packard) Ski Simulator - page 70

    6-6 Program Sim ulation Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 71

    Copyright © 2000 He wlett-Pac kard Co. Linux and MS-DOS ABI Em ulation 7-1 Ski IA-64 Simulator Ref erence Manual 1.0L 7 Linux and MS-DOS ABI Em ulation As discussed in Section 6.1, “ Application-Mode and System-Mode Simulation”, Ski can provide application programs with a Linux-compatible or MS-DOS-compatible en vironment. The en vironments ar ...

  • HP (Hewlett-Packard) Ski Simulator - page 72

    7-2 Linux and MS-DOS ABI Em ulation Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Ski accepts but ignores the system calls sho wn in T able 7-2. For those that return an error indication, the errno code is sho wn in parentheses. All other ignored system calls return with a success indication, having done nothing ...

  • HP (Hewlett-Packard) Ski Simulator - page 73

    Copyright © 2000 He wlett-Pac kard Co. Linux and MS-DOS ABI Em ulation 7-3 Ski IA-64 Simulator Ref erence Manual 1.0L 7.3 MS-DOS Application En vironment IA-32 application-mode programs “see” a limited MS-DOS en vironment. The MS-DOS en vironment is emulated by cre- ating and initializing an MS-DOS Program Segment Prefix (PSP) and by setting ...

  • HP (Hewlett-Packard) Ski Simulator - page 74

    7-4 Linux and MS-DOS ABI Em ulation Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 75

    Copyright © 2000 He wlett-Pac kard Co. Debug ging 8-1 Ski IA-64 Simulator Ref erence Manual 1.0L 8 Deb ugging The simulator provides man y facilities to help you debug your programs. Y ou can modify the current state of the simu- lated processor , set program breakpoints, trace program ex ecution, and dump a memory image into a file. 8.1 Changing ...

  • HP (Hewlett-Packard) Ski Simulator - page 76

    8-2 Debug ging Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L The hexadecimal v alue 0x1234 is assigned to general register 1. The six upper (more significant) bytes are padded with zeroes. = r1 ip+10 The value in ip added to 0x10 is assigned to general register 1. = f2.m 1234 ; = f2.s 1 ; = f2.e 10033 The hexad ...

  • HP (Hewlett-Packard) Ski Simulator - page 77

    Copyright © 2000 He wlett-Pac kard Co. Debug ging 8-3 Ski IA-64 Simulator Ref erence Manual 1.0L 8.1.3 Notes on Assignment 8.1.3.1 Address Alignment Ski aligns addresses on natural boundaries: two-byte quantities are aligned on addresses di visible by two, four-byte quan- tities are aligned on addresses di visible by four, and eight-byte quantitie ...

  • HP (Hewlett-Packard) Ski Simulator - page 78

    8-4 Debug ging Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L 8.2 Ev aluating Formulas and Formatting Data The eval command ev aluates one or more expressions and prints the result(s) in decimal and he xadecimal. An example of the eval command and a more complete discussion are in Section 4.4.1.2, “Expressions? ...

  • HP (Hewlett-Packard) Ski Simulator - page 79

    Copyright © 2000 He wlett-Pac kard Co. Debug ging 8-5 Ski IA-64 Simulator Ref erence Manual 1.0L 8.3.2 Deleting Program Breakpoints T wo commands delete program breakpoints. The bd command deletes a specified breakpoint. The bD command deletes all breakpoints currently set. 8.3.3 Listing Pr ogram Breakpoints The bl command causes a list of curren ...

  • HP (Hewlett-Packard) Ski Simulator - page 80

    8-6 Debug ging Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L 8.3.4 Notes on Pr ogram Breakpoints 8.3.4.1 How Ski Implements Breakpoints Program breakpoints are implemented by replacing the instruction at the address of each breakpoint with an IA-64 BREAK instruction or an IA-32 INT3 instruction. The replacement ...

  • HP (Hewlett-Packard) Ski Simulator - page 81

    Copyright © 2000 He wlett-Pac kard Co. Debug ging 8-7 Ski IA-64 Simulator Ref erence Manual 1.0L iabs [ addr ess ] Sets an IA-32 breakpoint at the specified address or , if no addr ess is giv en, at the location pointed to by ip . bd br eakpoint_number Deletes the breakpoint numbered by breakpoint_number . bD Deletes all breakpoints. bl Displays ...

  • HP (Hewlett-Packard) Ski Simulator - page 82

    8-8 Debug ging Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L 8.5 Dumping Registers and Memory to a File Y ou can dump the registers to a file with the “ rd ” command, described in Section 5.1, “Re gister W indow Commands”. Y ou can dump a block of memory into a file in two forms: in he xadecimal or in ...

  • HP (Hewlett-Packard) Ski Simulator - page 83

    Copyright © 2000 He wlett-Pac kard Co. Debug ging 8-9 Ski IA-64 Simulator Ref erence Manual 1.0L isyms [ filename ] Writes the list of internal variables to filename if gi ven, otherwise to the screen. Figure 8-5. The symlist Output from xski ...

  • HP (Hewlett-Packard) Ski Simulator - page 84

    8-10 Debug ging Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 85

    Copyright © 2000 He wlett-Pac kard Co. Command Files 9-1 Ski IA-64 Simulator Ref erence Manual 1.0L 9 Command Files The dot (“ . ”) command temporarily redirects command input to the simulator so that input is taken from the file provided as an argument to the command. Into this file (a “command file”), you put commands as if you had ty ...

  • HP (Hewlett-Packard) Ski Simulator - page 86

    9-2 Command Files Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L example of using goto and a label is: loop: ... other commands ... goto loop 9.2.2 The if Command The if command allows for conditional e xecution. If the e xpression following the command e valuates to nonzero, the remainder of the line is ex ecute ...

  • HP (Hewlett-Packard) Ski Simulator - page 87

    Copyright © 2000 He wlett-Pac kard Co. Command Files 9-3 Ski IA-64 Simulator Ref erence Manual 1.0L 9.5 Summary of Command File Commands . filename Executes commands in the gi ven command file. The file is opened and its contents are e xecuted as if they were entered from the ke yboard. When the contents of a non-nested command file are exhaus ...

  • HP (Hewlett-Packard) Ski Simulator - page 88

    9-4 Command Files Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 89

    Copyright © 2000 He wlett-Pac kard Co. Command Reference A-1 Ski IA-64 Simulator Ref erence Manual 1.0L A Command Reference In the command descriptions that follow , this face indicates literal text you should type, this face indicates operand te xt you should modify , [bracketed text] indicates text you may choose to omit (ne ver type the brack e ...

  • HP (Hewlett-Packard) Ski Simulator - page 90

    A-2 Command Reference Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L cated page, including instruction pages. Multiple values may not be supplied. The string may not contain spaces and quoting it is not a workaround. See “Changing Registers and Memory with Assignment Commands” on page 8-1. bs [ addr ess ] Set ...

  • HP (Hewlett-Packard) Ski Simulator - page 91

    Copyright © 2000 He wlett-Pac kard Co. Command Reference A-3 Ski IA-64 Simulator Ref erence Manual 1.0L df [ count ] Mov e the Data W indow forward count lines or one windo wful if no count is gi ven. See “Data W indow Commands” on page 5-5. dh Display Data W indow contents in he xadecimal format. See “Data W indow Commands” on page 5-5. e ...

  • HP (Hewlett-Packard) Ski Simulator - page 92

    A-4 Command Reference Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L isyms [ filename ] Write internal symbols to the screen or to the file giv en by filename . See “Symbol T able Commands” on page 8-8. load filename [ ar gs ] + Prepare for IA-64 application-mode simulation: Load the IA-64 ELF ex ecutable ...

  • HP (Hewlett-Packard) Ski Simulator - page 93

    Copyright © 2000 He wlett-Pac kard Co. Command Reference A-5 Ski IA-64 Simulator Ref erence Manual 1.0L the last line of the old window is displayed as the first line of the ne w windo w . ( ski only) See “ski Register W indow Commands” on page 5-1. rb [ count ] Mov es the Register W indow “backw ard” (scroll up) through the currently-dis ...

  • HP (Hewlett-Packard) Ski Simulator - page 94

    A-6 Command Reference Copyright © 2000 Hewlett-P ackar d Co. Ski IA-64 Simulator Ref erence Manual 1.0L ur ski : Sho w the user registers (Predicate Registers, Branch Re gisters, Application Registers, Instruction Pointer , User Mask) in the Register W indow . See “Register W indow Commands” on page 5-1. xski : T oggle the display of the user ...

  • HP (Hewlett-Packard) Ski Simulator - page 95

    Copyright © 2000 He wlett-Pac kard Co. Register Names B-1 Ski IA-64 Simulator Ref erence Manual 1.0L B Register Names IA-64 registers are fully described in other documents. This appendix provides a list for con venience only . The register names are documented here as recognized by Ski and, in a fe w cases, don’t exactly match the names in othe ...

  • HP (Hewlett-Packard) Ski Simulator - page 96

    B-2 Register Names Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L eflags.df IA-32 Direction Flag bit eflags.id IA-32 ID Flag bit eflags.if IA-32 Interruption Flag bit eflags.iopl IA-32 I/O Privile ge Lev el bit eflags.le IA-32 Less Equal Flag bit eflags.lt IA-32 Less Than Flag bit eflags.nt IA-32 Nested T ...

  • HP (Hewlett-Packard) Ski Simulator - page 97

    Copyright © 2000 He wlett-Pac kard Co. Register Names B-3 Ski IA-64 Simulator Ref erence Manual 1.0L fpsr .sf2.pc IA-64 FPSR Status Field 2, Precision control bits fpsr .sf2.rc IA-64 FPSR Status Field 2, Rounding control bits fpsr .sf2.v IA-64 FPSR Status Field 2, IEEE In valid Operation status bit fpsr .sf2.d IA-64 FPSR Status Field 2, Denormal/U ...

  • HP (Hewlett-Packard) Ski Simulator - page 98

    B-4 Register Names Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L ldtd IA-32 Local Descriptor T able Descriptor lid IA-64 Local Interrupt ID lrr0-lrr1 IA-64 Local Redirection Registers p0 - p63 IA-64 Predicate Registers pfs IA-64 Previous Function State pkr0 - pkr15 IA-64 Protection Ke y Registers pmc0 - pmc15 IA ...

  • HP (Hewlett-Packard) Ski Simulator - page 99

    Copyright © 2000 He wlett-Pac kard Co. Register Names B-5 Ski IA-64 Simulator Ref erence Manual 1.0L psr .tb IA-64 PSR T aken Branch trap bit psr .um IA-64 PSR User Mask bits psr .up IA-64 PSR User Performance monitor enable bit pta IA-64 Page T able Address r0, r1, … r127 IA-64 General Registers r0.nat, … r127.nat IA-64 General Re gister Not- ...

  • HP (Hewlett-Packard) Ski Simulator - page 100

    B-6 Register Names Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 101

    Copyright © 2000 He wlett-Pac kard Co. Internal V ariable Names C-1 Ski IA-64 Simulator Ref erence Manual 1.0L C Internal V ariable Names Ski has one combined symbol table for registers and internal v ariables. (See Section 4.4.2.2, “Registers” and Section 4.4.2.3, “Internal V ariables”.) A separate symbol table describes program-defined ...

  • HP (Hewlett-Packard) Ski Simulator - page 102

    C-2 Internal V ariable Names Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L ...

  • HP (Hewlett-Packard) Ski Simulator - page 103

    Copyright © 2000 He wlett-Pac kard Co. Simulator Status and Err or Messages D-1 Ski IA-64 Simulator Ref erence Manual 1.0L D Sim ulator Status and Error Messa ges The following is a description of some of the status and error messages which can be produced by the simulator . “Fault” and “T rap” messages are usually the result of a program ...

  • HP (Hewlett-Packard) Ski Simulator - page 104

    D-2 Simulator Status and Err or Messages Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Breakpoint #%d wasn’t set Y ou used the bd command to delete a specific breakpoint but that breakpoint doesn’ t exist. Did you specify the right breakpoint? Use the bl command to list the breakpoints. See “Deleting Prog ...

  • HP (Hewlett-Packard) Ski Simulator - page 105

    Copyright © 2000 He wlett-Pac kard Co. Simulator Status and Err or Messages D-3 Ski IA-64 Simulator Ref erence Manual 1.0L missions are wrong or a remote file has suddenly become inaccessible? See “The Program W indow” on page 3-6 and the discussion of the pm command in “Program Windo w Commands” on page 5-2. Error: unr ecognized restor e ...

  • HP (Hewlett-Packard) Ski Simulator - page 106

    D-4 Simulator Status and Err or Messages Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L help: Unknown command: %s Y ou asked Ski to tell you about a particular command b ut the command you asked for doesn’t e xist. Try the help command alone to get a list of all of the commands Ski understands. See “Command E ...

  • HP (Hewlett-Packard) Ski Simulator - page 107

    Copyright © 2000 He wlett-Pac kard Co. Simulator Status and Err or Messages D-5 Ski IA-64 Simulator Ref erence Manual 1.0L Missing ELF header See “File size > Memory size” on page D-3. Missing file version number Y ou are trying to restore a sa ved simulator state and the first non-blank, non-comment line of the file doesn’t be gin wit ...

  • HP (Hewlett-Packard) Ski Simulator - page 108

    D-6 Simulator Status and Err or Messages Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Not an IA-64 file See “File size > Memory size” on page D-3. Nothing to run No program has been loaded. Use the load , iaload ,o r romload command, depending on what kind of program you want to simulate or load an IA-6 ...

  • HP (Hewlett-Packard) Ski Simulator - page 109

    Copyright © 2000 He wlett-Pac kard Co. Simulator Status and Err or Messages D-7 Ski IA-64 Simulator Ref erence Manual 1.0L Reserved r egister/field fault Y our IA-64 application-mode program tried to access a reserved re gister or portion of a register . This can only hap- pen for application-mode programs; system-mode programs handle this fault ...

  • HP (Hewlett-Packard) Ski Simulator - page 110

    D-8 Simulator Status and Err or Messages Copyright © 2000 He wlett-Pac kard Co. Ski IA-64 Simulator Ref erence Manual 1.0L Unable to open console window Y our system-mode program tried to open a console with the appropriate Simulator System Call but Ski w asn’t able to spawn the corresponding xterm program. First, v erify that en vironment varia ...

Производитель HP (Hewlett-Packard) Категория Computer Accessories

Документы, которые мы получаем от производителя устройства HP (Hewlett-Packard) Ski Simulator мы можем разделить на несколько групп. Это в частности:
- технические чертежи HP (Hewlett-Packard)
- инструкции обслуживания Ski Simulator
- паспорта изделия HP (Hewlett-Packard)
- информационные брошюры
- энергетические этикетки HP (Hewlett-Packard) Ski Simulator
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания HP (Hewlett-Packard) Ski Simulator.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа HP (Hewlett-Packard) Ski Simulator, инструкции обслуживания, короткие инструкции или инструкции пользователя HP (Hewlett-Packard) Ski Simulator. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия HP (Hewlett-Packard) Ski Simulator.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства HP (Hewlett-Packard) Ski Simulator, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании HP (Hewlett-Packard) Ski Simulator пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей HP (Hewlett-Packard) Ski Simulator.

Полная инструкция обслуживания HP (Hewlett-Packard), должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией HP (Hewlett-Packard) Ski Simulator - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания HP (Hewlett-Packard) Ski Simulator, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся HP (Hewlett-Packard) Ski Simulator, которое найдем в данном документе
3. Советы по использованию основных функций устройства HP (Hewlett-Packard) Ski Simulator - которые должны облегчить нам первые шаги во время использования HP (Hewlett-Packard) Ski Simulator
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем HP (Hewlett-Packard) Ski Simulator
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра HP (Hewlett-Packard) Ski Simulator в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся HP (Hewlett-Packard) Ski Simulator?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с HP (Hewlett-Packard) Ski Simulator, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с HP (Hewlett-Packard) Ski Simulator со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)