-
Fujitsu 2142-02 - page 1
FUJITSU SEMICONDUCTOR CONTROLLER MANUAL F 2 MC FAMILY 10BASE-T LAN ADAPTER MB2142-02 USER’S MANUAL CM41-00412-1E ...
-
Fujitsu 2142-02 - page 2
PREFACE ■ Objectives and intended readership The MB2142-02 support tool (10BASE-T LAN adapter) is designed to enable the development and evaluation of products based on the F 2 MC* family. The MB2142-02 is connected to the main unit (MB2141). This enables the main unit to perform LAN-based communication with the host machine (such as a personal c ...
-
Fujitsu 2142-02 - page 3
1995 FUJITSU LIMITED Printed in Japan 1. The products described in this manual and the specifications thereof may be changed without prior notice. To obtain up-to-date information and/or specifications, contact your Fujitsu sales representative or Fujitsu authorized dealer. 2. Fujitsu will not be liable for infringement of copyright, industrial ...
-
Fujitsu 2142-02 - page 4
READING THIS MANUAL ■ Page layout In this manual, an entire section is presented on a single page or spread whenever possible. The reader can thus view a section without having to flip pages. The contents of each section are summarized immediately below the title. You can obtain a rough overview of the 10BASE-T LAN adapter (MB2142-02) by reading ...
-
Fujitsu 2142-02 - page 5
i CONTENTS CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT ................................................. 1 1.1 Packing List ................................................................................................................................ ........ 2 1.2 10BASE-T LAN Adapter Specifications ..................................... ...
-
Fujitsu 2142-02 - page 6
ii FIGURES TABLES Figure 1.1 10BASE-T LAN adapter ............................................................................................................... 2 Figure 1.3 IF cable dimensions ..................................................................................................................... 7 Figure 2.1 System configuration ... ...
-
Fujitsu 2142-02 - page 7
1 CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT This chapter explains the handling and specifications of the 10BASE-T LAN adapter. Read this chapter and check the contents of the package before attempting to use the 10BASE-T LAN adapter. 1.1 Packing List 1.2 10BASE-T LAN Adapter Specifications 1.3 IF Cable Specifications 1.4 Notes on Use ...
-
Fujitsu 2142-02 - page 8
2 1.1 Packing List Before first using the 10BASE-T LAN adapter, check that the package contains the following components: • 10BASE-T LAN adapter × 1 • IF cable × 1 ■ Appearance and names of parts Figure 1.1 illustrates the 10BASE-T LAN adapter. For details of the necessary connections, see Chapter 2, “Connections.” Figure 1.1 10BASE-T L ...
-
Fujitsu 2142-02 - page 9
3 The function of each part is described below: IF connector: Used to connet the IF cable. 10BASE-T LAN connector: Used to connect the twisted pair LAN cable. ...
-
Fujitsu 2142-02 - page 10
4 1.2 10BASE-T LAN Adapter Specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. Table 1.2b lists the LAN specifications. ■ 10BASE-T LAN adapter specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. *1: Power is supplied from the main unit. *2: Not including projections. *3: Not including the IF cable. Table ...
-
Fujitsu 2142-02 - page 11
5 ■ LAN specifications Table 1.2b lists the LAN specifications. An RJ45 type LAN connector (8-conductor modular connector, 10BASE-T-compatible) is used. Note: To set the IP address, port address, or Ethernet local address, use the LAN address write program supplied with the emulator debugger. Execute the program from the host machine, via the RS- ...
-
Fujitsu 2142-02 - page 12
6 1.3 IF Cable Specifications Table 1.3a lists the IF cable components, Table 1.3b lists the general specifications of the IF cable, and Figure 1.3 shows the dimensions of the IF cable. ■ IF cable specifications For an explanation of connecting the adapter to the main unit, see Section 2.2, “Connection to Main Unit.” Table 1.3a IF cable compo ...
-
Fujitsu 2142-02 - page 13
7 Figure 1.3 IF cable dimensions 300 ± 1 0mm Con ne ctor (FCN -23 7R 068- G/E ) Cov er (FCN- 230 C 068-C /E) ...
-
Fujitsu 2142-02 - page 14
8 1.4 Notes on Use When using the 10BASE-T LAN adapter, keep the following points in mind: ■ Operating considerations When using the 10BASE-T LAN adapter, always keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. ❍ When removing a connector, do not pull the cable itself; grasp and pull the connector ...
-
Fujitsu 2142-02 - page 15
9 CHAPTER 2 CONNECTIONS This chapter describes how to connect, turn on, and turn off the 10BASE-T LAN adapter. Familiarize yourself with the contents of this chapter before attempting to turn on the adapter. 2.1 System Configuration 2.2 Connection to Main Unit 2.3 Connection to Network 2.4 Power-on Sequence 2.5 Power-off Sequence ...
-
Fujitsu 2142-02 - page 16
10 2.1 System Configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN-based communication with the host machine. ■ System configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN- based communication with the host machine. Figure 2.1 shows the hardware ...
-
Fujitsu 2142-02 - page 17
11 Memo ...
-
Fujitsu 2142-02 - page 18
12 2.2 Connection to Main Unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately). ■ Connection to main unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately). Figure 2.2 Connection to main unit F9210000I 01A L AN LAN ADAPTOR 1 ...
-
Fujitsu 2142-02 - page 19
13 ■ Notes When connecting the 10BASE-T LAN adapter to the main unit (sold separately), keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction. ❍ To remove a cable, do not pull the cable itself; grasp and pull the conne ...
-
Fujitsu 2142-02 - page 20
14 2.3 Connection to Network As shown in Figure 2.3, connect the LAN conector to the network that includes the host machine. ■ Connection to network According to Figure 2.3, connect the LAN conector to the network that includes the host machine. Use a commercially available twisted pair LAN cable and hub; these parts are not supplied with the 10B ...
-
Fujitsu 2142-02 - page 21
15 ■ Notes When connecting the LAN connector to the network that includes the host machine, keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction. ❍ To remove a cable, do not pull the cable itself; grasp and pull the c ...
-
Fujitsu 2142-02 - page 22
16 2.4 Power-on Sequence Before turning on the power, ensure that all connections are complete. Then, turn on the power in the order of the host machine, the main unit, then the target (user system). ■ Power-on sequence Before turning on the power, ensure that all connections are complete. Then, turn on the power in the order of the host machine, ...
-
Fujitsu 2142-02 - page 23
17 2.5 Power-off Sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. ■ Power-off sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. To turn off the power, set the power switch on the rear panel of the main unit to “0.” Turning off ...
У вас вопрос, касающийся Fujitsu 2142-02?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Fujitsu 2142-02, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Fujitsu 2142-02 со всей вероятностью он захочет поделиться методом ее решения.