-
Mercury Roll Up 899197001 - page 1
i All of us at Mercury Marine want to thank you for choosing a Mercury Marine Inflatable boat. You have made a sound investment in boating pleasure. We firmly believe it will bring you many years of boating fun and excitement. This Owners Manual contains all the safety and operating information you need to get the most out of your Inflatable boat. ...
-
Mercury Roll Up 899197001 - page 2
ii Record your Hull Identification Number (HIN) and engine model/ serial number. The HIN is located on the back of the boat on the starboard side. The engine model/serial number is located on the swivel bracket. You will need this information to obtain parts, warranty service or provide information if your inflatable boat is stolen. Purchase Date D ...
-
Mercury Roll Up 899197001 - page 3
TABLE OF CONTENTS iii WARRANTY INFORMATION Transfer of Warranty .................................................................... 1 Warranty Registration United States and Canada ....................... 1 Mercury Inflatable Boat Limited Warranty United States and Canada ............................................................................ ...
-
Mercury Roll Up 899197001 - page 4
TABLE OF CONTENTS iv Air Chamber Deflates Accidently ............................................... 27 Beaching .................................................................................... 27 MAINTENANCE Cleaning Procedure ................................................................... 28 Deflating ..................................... ...
-
Mercury Roll Up 899197001 - page 5
WARRANTY INFORMATION 1 Transfer of Warranty The limited warranty is transferable to a subsequent purchaser, but only for the remainder of the unused portion of the limited warranty. This will not apply to products used for commercial applications. To transfer the warranty to the subsequent owner, send or fax a copy of the bill of sale or purchase a ...
-
Mercury Roll Up 899197001 - page 6
WARRANTY INFORMATION 2 Mercury Marine Attn: Warranty Registration Department W6250 W. Pioneer Road P.O. Box 1939 Fond du Lac, WI 54936-1939 920-929-5054 Fax 920-929-5893 NOTE: Registration lists must be maintained by Mercury Marine and any dealer on marine products sold in the United States, should a safety recall notification under the Federal Saf ...
-
Mercury Roll Up 899197001 - page 7
WARRANTY INFORMATION 3 DURATION OF COVERAGE The fiberglass hull, air deck® floor, all hull attachments and accessories, but not limited to, floorboards. seats, rope holders, oar locks, oars, rope, air pump, lifting handles, d‑rings, oar holders, valves, seat webbings, and transom integrity are covered by this Limited Warranty for one (1) year fr ...
-
Mercury Roll Up 899197001 - page 8
WARRANTY INFORMATION 4 HOW TO OBTAIN WARRANTY COVERAGE The customer must provide Mercury with a reasonable opportunity to repair, and reasonable access to the product for warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury dealer authorized to service the product. If purchaser cannot deliver the pro ...
-
Mercury Roll Up 899197001 - page 9
WARRANTY INFORMATION 5 DISCLAIMERS AND LIMITATIONS: THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE ...
-
Mercury Roll Up 899197001 - page 10
GENERAL INFORMATION 6 Boater's Responsibilities The operator (driver) is responsible for the correct and safe operation of the boat and safety of its occupants and general public. It is strongly recommended that each operator (driver) read and understand this entire manual before operating the boat. Be sure at least one additional person on bo ...
-
Mercury Roll Up 899197001 - page 11
GENERAL INFORMATION 7 Lanyard Stop Switch The purpose of a lanyard stop switch is to turn off the engine when the operator moves far enough away from the operator's position (as in accidental ejection from the operator's position) to activate the switch. Tiller handle outboards and some remote control units are equipped with a lanyard sto ...
-
Mercury Roll Up 899197001 - page 12
GENERAL INFORMATION 8 Important Safety Information: The purpose of a lanyard stop switch is to stop the engine when the operator moves far enough away from the operator's position to activate the switch. This would occur if the operator accidentally falls overboard or moves within the boat a sufficient distance from the operator's positio ...
-
Mercury Roll Up 899197001 - page 13
GENERAL INFORMATION 9 ! WARNING Avoid serious injury or death from deceleration forces resulting from accidental or unintended stop switch activation. The boat operator should never leave the operator's station without first disconnecting the stop switch lanyard from the operator. Accidental or unintended activation of the switch during normal ...
-
Mercury Roll Up 899197001 - page 14
GENERAL INFORMATION 10 WHILE BOAT IS STATIONARY ! WARNING Stop your engine immediately whenever anyone in the water is near your boat. Serious injury to the person in the water is likely if contacted by a rotating propeller, a moving boat, a moving gearcase, or any solid device rigidly attached to a moving boat or gearcase. Shift outboard into neut ...
-
Mercury Roll Up 899197001 - page 15
GENERAL INFORMATION 11 There is another less common hazardous result from allowing your boat to launch off a wave or wake. If the bow of your boat pitches down far enough while airborne, upon water contact it may penetrate under the water surface and submarine for an instant. This will bring the boat to a nearly instantaneous stop and can send the ...
-
Mercury Roll Up 899197001 - page 16
GENERAL INFORMATION 12 • The boat could move suddenly in a new direction. Such a sharp change in direction can cause occupants to be thrown out of their seats or out of the boat. • A rapid reduction in speed. This will cause occupants to be thrown forward, or even out of the boat. • Impact damage to the outboard and/or boat. Keep in mind, the ...
-
Mercury Roll Up 899197001 - page 17
GENERAL INFORMATION 13 ! WARNING Avoid the combination of a running engine and poor ventilation. Prolonged exposure to carbon monoxide in sufficient concentration can lead to unconsciousness, brain damage, or death. GOOD VENTILATION Ventilate passenger area, open side curtains, or forward hatches to remove fumes. 21622 Example of desired air flow t ...
-
Mercury Roll Up 899197001 - page 18
GENERAL INFORMATION 14 WHILE BOAT IS MOVING a b 21628 a - Running the boat with the trim angle of the bow too high b - Running the boat with no forward hatches open Safe Boating Suggestions In order to safely enjoy the waterways, familiarize yourself with local and other governmental boating regulations and restrictions, and consider the following ...
-
Mercury Roll Up 899197001 - page 19
GENERAL INFORMATION 15 Never be under the influence of alcohol or drugs while boating (it is the law) . Alcohol or drug use impairs your judgment and greatly reduces your ability to react quickly. Prepare other boat operators. Instruct at least one other person on board in the basics of starting and operating the outboard, and boat handling, in cas ...
-
Mercury Roll Up 899197001 - page 20
GENERAL INFORMATION 16 Description Model 200 240 Maximum engine power 3.1 kw (4 hp) 3.9 kw (5 hp) Maximum engine weight 25 kg (55 lbs.) 25 kg (55 lbs.) Maximum personnel 2 3 Air chambers 2 2 Outer length 200 cm (6 ft. 7 in.) 240 cm (7 ft. 11 in.) Inner hull length 126 cm (4 ft. 2 in.) 156 cm (5 ft. 1 in.) Outer width 130 cm (4 ft. 3 in.) 137 cm (4 ...
-
Mercury Roll Up 899197001 - page 21
GENERAL INFORMATION 17 Manufacturer's Plate The manufacturer's plate is located on the inside of the boat transom. a b c d e f g h i 14598 a - Boat design category ‑ see following table b - Certified Europe Insignia c - Model number d - Maximum load capacity ‑ people + outboard + fuel tank and equipment e - Maximum outboard weight f - ...
-
Mercury Roll Up 899197001 - page 22
GENERAL INFORMATION 18 Boat Design Categories Navigation Wind Force and Wave Height C Inshore Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions may experience wind force 6 (Beaufort scale) and wave heights up to 2 m (6.5 ft.). D Sheltered waters Designed for voyages on sheltered coastal waters, small b ...
-
Mercury Roll Up 899197001 - page 23
BOAT COMPONENTS 19 Components Location BACK VIEW a b 18599 a - Hull identification number (HIN) b - Drain valve (plug type drain shown) FRONT VIEW a 18602 a - Towing rings ...
-
Mercury Roll Up 899197001 - page 24
BOAT COMPONENTS 20 TRANSOM VIEW a b c d b 18603 a - Drain valve (plug type valve shown) b - Towing holes c - Motor plate d - Manufacturer's plate ...
-
Mercury Roll Up 899197001 - page 25
BOAT COMPONENTS 21 SIDE VIEW a b c 18619 a - Port air chamber valve b - Starboard air chamber valve c - Oars ...
-
Mercury Roll Up 899197001 - page 26
TRANSPORTING 22 Trailering Boat Use a trailer that will properly support the boat hull. Position the boat on the trailer so it will rest in a stable position on the trailer supports. The boat must be properly secured to the trailer. Secure the boat to the trailer using tie‑down straps. Tighten the straps down securely so they will prohibit boat m ...
-
Mercury Roll Up 899197001 - page 27
OPERATION 23 Inflating ! CAUTION Do not use a compressed air source to fill air chambers. Over inflation may result in damaged seams and/or bulkheads. IMPORTANT: Do not inflate or deflate one air chamber at a time. When inflating or deflating, maintain a balanced air pressure between air chambers to prevent stress or potential damage to the inside ...
-
Mercury Roll Up 899197001 - page 28
OPERATION 24 e. Starting at one of the air valves, inflate each air chamber in turn, inflating only a quarter of the way full. Repeat this procedure to evenly fill the air chambers until the air chambers are filled to the recommended air pressure of 0.24 bar (3.5 psi). NOTE: Always be aware of the air pressure in the air chambers. The air volume in ...
-
Mercury Roll Up 899197001 - page 29
OPERATION 25 SLIDE DRAIN VALVE OPERATION When underway, slide the drain to the open position and the water will automatically run out. The inner diaphragm will prevent water from returning. After the water has been drained, slide the drain to the closed position. PLUG DRAIN VALVE OPERATION When underway, remove the plug from the drain and the water ...
-
Mercury Roll Up 899197001 - page 30
OPERATION 26 • Be sure the boat is not overloaded. Do not exceed the maximum number of passengers or load capacity. Look at the boat capacity plate. • Be sure there is an approved personal flotation device of suitable size for each person aboard and readily accessible (it is the law). • Check that the paddles are in the boat in case of engine ...
-
Mercury Roll Up 899197001 - page 31
OPERATION 27 Position the passengers and distribute the load evenly in the boat to help counterbalance the weight of the outboard. 14775 Towing If the inflatable boat is to be towed by another boat, the inflatable boat must be empty. Remove outboard, fuel tank, and equipment. Attach a line between the towing rings to form a bridle. Attach a towing ...
-
Mercury Roll Up 899197001 - page 32
MAINTENANCE 28 Cleaning Procedure Inflate the air chambers. Clean the fabric with a mild soap and fresh water solution. Rinse with fresh water and dry thoroughly. Open the drain valve. Use a hose to wash out any debris from the interior. Wash the interior with soap and water. Clean any debris from the drain valve. Rinse with fresh water and dry tho ...
-
Mercury Roll Up 899197001 - page 33
MAINTENANCE 29 Folding Instructions 1. Deflate the boat following the deflating instructions. Keep the air valves open and the floor in‑place. 2. Remove the seat, oars, and any equipment. 3. Fold the deflated sides inward until they meet in the middle. 4. Fold the boat transom inward and then fold in the two rear cones inward over the transom. 18 ...
-
Mercury Roll Up 899197001 - page 34
REPAIRS 30 Air Chamber Repair ‑ PVC Fabric ! WARNING Avoid serious injury or death from a fire, explosion or poisoning. The glues and solvents used for repairing inflatables are toxic and highly flammable. As a safety precaution, always work outdoors or in an area that is well‑ventilated, and away from any open flames, sparks, or appliances equ ...
-
Mercury Roll Up 899197001 - page 35
REPAIRS 31 ONE PART GLUE (EMERGENCY REPAIRS ONLY) Follow the directions on the cement tube. TWO PART ADHESIVE Mix a batch of adhesive according to the mixing directions provided with the two part adhesive. Keep adhesive off skin. When the adhesive is fully mixed, it must sit for a short time to activate the catalyst. Failure to do so will create po ...
-
Mercury Roll Up 899197001 - page 36
STORAGE 32 Storage Preparation NOTE: The boat should be cleaned and rinsed with fresh water before being placed in long term storage. Refer to Cleaning Procedure . IMPORTANT: To prevent fabric discoloration from marine growth or polluted waters, do not store the boat in water for extended periods of time. Clean the boat fabric following the Cleanin ...
-
Mercury Roll Up 899197001 - page 37
OWNERS SERVICE ASSISTANCE 33 Service Assistance Your satisfaction with your inflatable product is very important to your dealer and to us. If you ever have a problem, question or concern about your inflatable boat or outboard motor, contact your dealer or any authorized Mercury Marine dealership. If additional assistance is required, take these ste ...
У вас вопрос, касающийся Mercury Roll Up 899197001?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Mercury Roll Up 899197001, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Mercury Roll Up 899197001 со всей вероятностью он захочет поделиться методом ее решения.