-
Teac CD-X9 - page 1
9A10303900 Z Micr o Hi-Fi System OWNER’S MANUAL CD - X9 ...
-
Teac CD-X9 - page 2
2 IMPOR T ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sou ...
-
Teac CD-X9 - page 3
3 This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968“, and is classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside ...
-
Teac CD-X9 - page 4
4 Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Using the Unit . . . . . . . . . . . . . . . . . . . . ...
-
Teac CD-X9 - page 5
5 Discs MP3 compatibility < File names of MP3 should be alphanumeric characters. This unit cannot display symbols and full-size or 2 bytes-wide characters (such as Japanese, Chinese, etc.) correctly. Also, be sure to use the file extension “.mp3”. < The disc must be finalized in order to play. < The CD-ROM must be ISO 9660 compatible. ...
-
Teac CD-X9 - page 6
6 Connection AM loop antenna Position the antenna for the best sound. If you want, you can hook the AM antenna on a wall as shown below: A CAUTION < Turn off the power of all the equipment before making connections. < Read instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hu ...
-
Teac CD-X9 - page 7
7 W all Mounting You can mount the main unit and/or the left and right speakers on a wall. Precautions < Be aware that the length of the cables are approximately 3 m. Do not attempt to mount the main unit and the speakers too far from the subwoofer. < Drill holes into solid wall support, such as wooden frame or concrete wall. < TEAC suppli ...
-
Teac CD-X9 - page 8
8 Remote Sensor When operating the remote control unit, point it towards here. VOLUME Press the up “+” or the down “–” button to adjust the volume. MEMORY/TIME SET In CD mode, use this button to program tracks. In TUNER mode, use this button to store preset channels into memory. This button is also used for clock adjustment. FM MODE/MP3 I ...
-
Teac CD-X9 - page 9
9 SKIP ( . / / ) / TUNING In CD mode, momentarily press this button to skip tracks. Hold down this button to search for a part of a track. In TUNER mode, momentarily press this button to tune in stations. In Standby mode, these buttons are used to set or adjust the clock and the timer. CD door Display STOP ( H ) Use this button to stop playback of ...
-
Teac CD-X9 - page 10
10 Basic Operation 2 1 3 4 Select a source by pressing the FUNCTION button. 3 Play the source and adjust the volume using the VOLUME buttons. 4 Muting To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound. < While muting is engaged, the VOLUME level indicators blink. Headphones For private lis ...
-
Teac CD-X9 - page 11
11 Listening to CD/MP3 (1) 1 5 4 2 3 Press the FUNCTION button to select “CD”. 1 Press the OPEN/CLOSE button. 2 Put a disc onto the center spindle of the player with the label side facing you. Press the disc onto the spindle until a slight “click” is heard indicating the disc is mounted correctly. 3 < Never put more than one disc in the ...
-
Teac CD-X9 - page 12
12 MP3 Listening to CD/MP3 (2) T o suspend playback temporarily (pause mode) T o stop playback Press the Stop button ( H ) to stop playback. T o skip to the next or a previous track Press the Play/Pause button ( G / J ) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button ( G / J ) again. During p ...
-
Teac CD-X9 - page 13
13 Search Mode (MP3 only) Search for a track in a folder Press the MP3 button twice. The name of folder is displayed. Press the SKIP button ( . or / ) to find the folder that the track you want to listen to is included. Press and hold the SKIP button ( . or / ). Then you can select the track in the folder by pressing the SKIP button ( . or / ). < ...
-
Teac CD-X9 - page 14
14 MEMORY FUNCTION Up to 64 tracks can be programmed in the desired order. Shuffle function doesn’t work during programmed playback. Press the FUNCTION button to select “CD”. 1 Press the MEMORY button. 2 “MEMORY” lights up in the display. < To cancel the program mode, press the Stop button ( H ). Press the Skip button ( . or / ) repeat ...
-
Teac CD-X9 - page 15
15 T o check the programmed or der In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. T o add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “00” appears on the display. Select a track number using the Skip button ( . or / ) and th ...
-
Teac CD-X9 - page 16
16 Shuffle Playback The tracks can be played randomly. Press the SHUFFLE button during playback or when in the stop mode. “SHUFFLE” will then light up in the display. < If you press the / button during shuffle playback, next track will be randomly selected and played. If you press the . button, the currently played track will be played from ...
-
Teac CD-X9 - page 17
17 Listening to the Radio 3 2 1 Press the FUNCTION button to select “TUNER”. 1 Press the FM/AM button to select a band. 2 Select the station you want to listen to (auto selection). 3 Hold down the TUNING Up or Down button until the frequency display begins to change. When a station is tuned in, the tuning process will stop automatically. < P ...
-
Teac CD-X9 - page 18
18 Preset T uning You can store FM and AM stations into preset channels 1 to 10 respectively. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. Tune in a station you want to listen to (see steps to of page 17). 3 1 1 Press the MEMORY button. 2 Within 5 seconds, press ...
-
Teac CD-X9 - page 19
19 Setting the Clock If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. If the unit is on, press the STANDBY/ON switch to turn it standby 1 Press the TIME SET button once more. The “hour” value blinks. 3 Press the SKIP button ( . / / ) to set the current hour. 4 P ...
-
Teac CD-X9 - page 20
20 Setting the Timer < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. Press and hold the TIMER button until “TIMER” and “ON” indicators appear on the display. 1 The “hour” value starts flashing. < When no button is pressed for 10 seconds, the timer setting mode wi ...
-
Teac CD-X9 - page 21
21 Press the SKIP button ( . / / ) to select a source (CD or TUNER), and then press the TIMER button. 6 Press the SKIP button ( . / / ) to set the volume, and then press the TIMER button. 7 The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day. Don’t forget to turn the unit off (standby), o ...
-
Teac CD-X9 - page 22
22 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is ...
-
Teac CD-X9 - page 23
23 Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mV Frequency Response . . . . . . . . . . . . . . . . . . . 50 to 20,000 Hz TUNER Sec ...
-
Teac CD-X9 - page 24
0605 . MA-0984A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 ...
У вас вопрос, касающийся Teac CD-X9?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Teac CD-X9, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Teac CD-X9 со всей вероятностью он захочет поделиться методом ее решения.