-
Speco CVC230HZ - page 1
OPERA TION / INST ALLA TION MANUAL 200 New Highway , Amityville, NY 1 1701 www .specotech.com ! Speco T echnologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev . 4/28/10 ...
-
Speco CVC230HZ - page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure the may be of sufficient to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to ...
-
Speco CVC230HZ - page 3
...
-
Speco CVC230HZ - page 4
...
-
Speco CVC230HZ - page 5
1) Camera mounting screw hole 2) Camera mounting screw hole Back 3) Key Buttons 4) Power LED 5) Video Output Jack 6) RS-485 9) Power Input T erminal 8) Communication Control Connector 7) External Control Connector ...
-
Speco CVC230HZ - page 6
: T o Move the arrow indicator to up. : T o Move the arrow indicator to down. : T o Move the arrow indicator to left. : T o Move the arrow indicator to right. Main setup menu can be navigated using these buttons. SET : T o access the main setup menu. UP (WIDE button) Down (TELE button) LEFT ( F-NEAR button) RIGHT (F-F AR button) *The zoom position ...
-
Speco CVC230HZ - page 7
7. External Control connector Relaters to the motion detection output signal. Zoom and focus functions can be controlled using external signals. 8. Communication Control Connector Used to connect the Remote Controller (Option). 9. Power Input T erminal Power supply terminal + Connection methods may vary depending on the video equipment. Please refe ...
-
Speco CVC230HZ - page 8
2) Connecting to Power Each model has a different power input specification. Please check the model type and standard power requirement before connecting to power . + Communication Control Connector Pin Description. Number Name Number Name 1 Right 4 Auto Focus 2 Left 5 Down 3 Setup 6 Up ? ...
-
Speco CVC230HZ - page 9
MAIN SETUP MENU RESET EXIT MOTION DET OFF FOCUS MODE ZOOM SPEED DISP ZOOM MAG LENS INIT ZOOM TRK D-ZOOM ZOOM POS INIT END EXPOSURE BRIGHTNESS AGC END IRIS SSNR SHUTTER SENS-UP WHITE BALANCE A TW(OUTDOOR) MANUAL A WC SET BACKLIGHT OFF HIGH MIDDLE LOW CAM TITLE OFF ON SPECIAL USER PRESET DA Y/NIGHT COMM ADJ PRIV ACY DIS SYNC END IMAGE ADJ ...
-
Speco CVC230HZ - page 10
Up button SET button LEFT button RIGHT button DOWN button Use the six buttons on back of the camera 1. Press the SET button to access the main setup mode. - Main setup menu is displayed on the monitor screen MAIN SETUP CAM TITLE WHITE BAL BACKLIGHT MOTION DET FOCUS EXPOSURE SPECIAL RESET EXIT OFF A TW OFF OFF ▶ ◀ ┘ ◀ ┘ ◀ ┘ ◀ ┘ 2. ...
-
Speco CVC230HZ - page 11
3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to ‘EXIT’ and press the SET button. Use this feature to designate a name for the camera, which will display on the monitor screen. 1. Press the SET Button to display the main setup menu and move the arrow indicator to ‘CAM ...
-
Speco CVC230HZ - page 12
4. Y ou can enter up to 20 characters. 1) Move the cursor to the character entry field using the LEFT or RIGHT button. 2) Use UP , DOWN, LEFT , and RIGHT buttons to select a desired character . CAM TITLE SETUP ABCDEFGHIJKLMNO PQRSTUVWXYZabcd efghijklmnopqrs T uvwxyz01234567 89( ) < > - / # ! ? , . CLR POS END 3) Press the SET button t ...
-
Speco CVC230HZ - page 13
Y our camera provides three ‘WHITE BAL ’ control modes for your choosing in Adjusting the white balance. 1. Press the SET button to access the main setup menu and move the indicator to ‘WHITE BAL ’ using the UP or DOWN button. 2. Set ‘WHITE BAL ’ using the LEFT or RIGHT button. MAIN SETUP CAM TITLE WHITE BAL BACKLIGHT MOTION DET FOCUS E ...
-
Speco CVC230HZ - page 14
When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to ‘BACKLIGHT’ on the SETUP menu by using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT butto ...
-
Speco CVC230HZ - page 15
+ Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. + Please select the area you wish to observe from the 4 areas in AREA SEL mode. + Please s ...
-
Speco CVC230HZ - page 16
FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ONE-PUSH ON F AST OFF ON ▶ ◀ ┘ + ONE PUSH: Focus is automatically adjusted just once, after zoom position is changed. Select ‘ONE PUSH’ and press the SET button to conf irm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions using the directional buttons wh ...
-
Speco CVC230HZ - page 17
FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ONE-PUSH ON F AST ON ON ▶ ◀ ┘ D-ZOOM : Configure magnification limit from x2~x10 using this feature. Po sition the indicator over ‘D-ZOOM’ using the UP or DOWN butto n. Set ‘D-ZOOM’ to ‘ON’ and press the SET button to confirm. FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM ...
-
Speco CVC230HZ - page 18
FOCUS SETUP MODE ZOOM TRK ZOOM SPEED D-ZOOM DISP ZOOM MAG ZOOM POS INIT LENS INIT END ONE-PUSH ON F AST OFF ON OFF ON ▶ ◀ ┘ LENS INIT : Use this feature to initialize the lens. Position the indicator over L ENS INIT . Using the UP or Down button. Press the SET button to confirm. END: T o revert to the main setup menu. 1. Press the SET ...
-
Speco CVC230HZ - page 19
IRIS: Set ‘IRIS’ to ‘AUTO’ or ‘MANUAL ’. Position the indicator over ‘IRIS’ us ing the UP or DOWN button and then select the desired iris mode usi ng the LEFT or RIGHT button. EXPOSURE SETUP BRIGHTNESS IRIS SHUTTER AGC 50 ………… AUTO --- MIDDLE ▶ - AUTO : The iris is automatically activated upon illumination. - M ...
-
Speco CVC230HZ - page 20
AGC (Auto Gain Control) : For brighter images. 1. Position the indicator over ‘AGC’ using the UP or DOWN button. 2. Set ‘AGC’ to the desired mode using the LEFT or RIGHT button. EXPOSURE SETUP BRIGHTNESS IRIS SHUTTER AGC SSNR SENS-UP END 50 ………… AUTO --- MIDDLE MIDDLE AUTO ▶ - HIGH - MIDDLE - LOW - OFF : Wide r ...
-
Speco CVC230HZ - page 21
SENS-UP : This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over ‘SENS-UP’ using the UP or DOWN button. 2. Set ‘SENS-UP’ to the desired mode using the LEFT or RIGHT button. EXPOSURE SETUP BRIGHTNESS IRIS SHUTTER AGC SSNR SENS-UP END 50 ………… AUTO --- MIDDLE MIDDLE AUTO ▶ - ? ...
-
Speco CVC230HZ - page 22
USER PRESET : Preset user-Designated configurations using this feature. Position the indi cator over ‘USER PRESET’ using the UP or DOWN button and then set to ‘ON’ using the LEFT or RIGHT button. Press the SET button to confirm. SPECIAL SETUP USER PRESET PRIV ACY DA Y/NIGHT DIS SYNC COMM ADJ IMAGE ADJ END OFF OFF COLOR OFF INT ▶ ◀ ? ...
-
Speco CVC230HZ - page 23
- PRESET SA VE : Save configured preset. USER PRESET SETUP PRESET NO. PRESET MODE PRESET SA VE PRESET CLEAR END NO. 1 NO ▶ PRESET DEFINED - PRESET CLEAR : Clear configured preset. USER PRESET SETUP PRESET NO. PRESET MODE PRESET SA VE PRESET CLEAR END NO. 1 NO ▶ PRESET DEFINED - END : Revert to the SPECIAL SETUP menu. USER PRESET SETUP PRESET NO ...
-
Speco CVC230HZ - page 24
- GROUP SEL - MASK COLOR - AREA SEL - AREA MODE - TOP - BOTTOM - LEFT - RIGHT : Choose up to eight groups. Each group can consist of four mask areas. : Adjust desired mask color level. : Configure eight mask areas. : Mask area display . : T o move the mask area up. : T o move the mask area down. : T o move the mask a ...
-
Speco CVC230HZ - page 25
SYNC : - INT - LL : Internal synchronization. : External line-lock synchronization. It is not available at the moment. SPECIAL SETUP USER PRESET PRIV ACY DA Y/NIGHT DIS SYNC COMM ADJ IMAGE ADJ END OFF OFF COLOR OFF INT ▶ ◀ ┘ ◀ ┘ ◀ ┘ COMM ADJ : COMMUNICA TION SETUP CAM ID DISP CAM ID BAUD RA TE UART MODE RET PKT 1 ON 96 ...
-
Speco CVC230HZ - page 26
IMAGE ADJ : - FREEZE - H-REV - V -REV - SHARPNESS - COLOR : Use this feature to freeze capture an image. : Use this feature to horizontally inverse the screen. : Use this feature to vertically inverse the screen. : Increasing this value sharpens object edges. T oo high of a setting, however , produces noise and may obscure t ...
-
Speco CVC230HZ - page 27
MODEL CVC652HZ 23X COLOR ZOOM CAMERA Signal Format NTSC P AL Scanning System 2 : 1 Interlace Pick-Up Device 1/4” Color Sony™ Super-HAD CCD T otal Pixels Number 81 1 (H) x 508 (V) 795 (H) x 596 (V) Picture Element 768 (H) x 494 (V) 752 (H) x 582 (V) S/N Ratio 50dB (AGC Off, W eight On) Horizontal Resolution Color : 550TV Lines, B/W : 600TV Lines ...
-
Speco CVC230HZ - page 28
MODEL CVC652HZ 23X COLOR ZOOM CAMERA Gain Control Low , Middle, High, OFF Selectable White Balance A TW (INDOOR (3,000~10500K),OUTDOOR (1,800~10,500K)) / A WC / MANUAL Electronic shutter speed Auto/Manual (X128 ~ 1/60sec. ~ 1/120,000 sec.) Sense-up Limit is selectable Auto/Manual (X128 ~ 1/50sec. ~ 1/120,000 sec.) Sense-up Limit is selectable OSD B ...
У вас вопрос, касающийся Speco CVC230HZ?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Speco CVC230HZ, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Speco CVC230HZ со всей вероятностью он захочет поделиться методом ее решения.