Русский dropdown-ico

Инструкция обслуживания Asrock Z77 Pro4-M

71 страниц Не касается
Скачать

Перейти на страницу of 71

Summary
  • Asrock Z77 Pro4-M - page 1

    1 Z77 Pro4-M User Manual V ersion 1.1 Published July 2012 Copyright©2012 ASRock INC. All rights reserved. ...

  • Asrock Z77 Pro4-M - page 2

    2 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trade ...

  • Asrock Z77 Pro4-M - page 3

    3 Contents 1 Introduction ......................................................... 5 1.1 Package Contents ......................................................... 5 1.2 Specications ................................................................. 6 1.3 Motherboard Layout ....................................................... 13 1.4 I/O Panel ...

  • Asrock Z77 Pro4-M - page 4

    4 3 UEFI SETUP UTILITY ................................................. 45 3.1 Introduction .................................................................... 45 3.1.1 UEFI Menu Bar .................................................... 45 3.1.2 Navigation Keys ................................................... 46 3.2 Main Screen ................ ...

  • Asrock Z77 Pro4-M - page 5

    5 Chapter 1: Introduction Thank you for purchasing ASRock Z77 Pro4-M mot herboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contains introduction of the mo ...

  • Asrock Z77 Pro4-M - page 6

    6 1.2 Specifications Platform - Micro A TX Form Factor: 9.6-in x 9.6-in, 24.4 cm x 24.4 cm - All Solid Capacitor design (100% Japan-made high-quality Conductive Polymer Capacitors) CPU - Supports 3 rd and 2 nd Generation Intel ® Core TM i7 / i5 / i3 in LGA1 155 Package - Digi Power Design - 4 + 2 Power Phase Design - Supports Intel ® T urbo Boost ...

  • Asrock Z77 Pro4-M - page 7

    7 - Supports HDMI 1.4a T echnology with max. resolution up to 1920x1200 @ 60Hz - Supports DVI with max. resolution up to 1920x1200 @ 60Hz - Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz - Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR (High Bit Rate Audio) with HDMI (Compliant HDMI monitor is required) (see CAUTION 7 ) - Sup ...

  • Asrock Z77 Pro4-M - page 8

    8 USB3.0 - 2 x Rear USB 3.0 ports, support USB 1.0/2.0/3.0 up to 5Gb/s - 1 x Front USB 3.0 header (supports 2 USB 3.0 ports), supports USB 1.0/2.0/3.0 up to 5Gb/s Connector - 4 x SA T A2 3.0 Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and Intel Smart Response T echnology), NCQ, AHCI and Hot Plug functions - 4 ...

  • Asrock Z77 Pro4-M - page 9

    9 W ARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking T echnology , or using third-party overclocking tools. Overclocking may affect your system’s stability , or even cause damage to the components and devices of your system. It should be done a ...

  • Asrock Z77 Pro4-M - page 10

    10 CAUTION! 1. A bout the settings of “Hyper Threading T echnology”, please check page 52. 2. This mo therboa rd sup ports Dual Ch annel Memo ry T e chnolog y . Befo re you implement Dual Channel Memory T echnology , make sure to read the installation guide of memory modules on page 20 for proper installation. 3. Due to the operating system lim ...

  • Asrock Z77 Pro4-M - page 11

    11 thi s util ity , y ou can pr ess t he <F6 > key du ring the PO ST or th e <F2> key to enter into the BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS le to your USB ash drive, oppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional ...

  • Asrock Z77 Pro4-M - page 12

    12 Crashless BIOS will automatically nish the BIOS update procedure after regaining power . Please note that BIOS les need to be placed in the root directory of your USB disk. Only USB2.0 ports support this feature. 17. Administrators are able to establish an internet curfew or restrict internet acce ss at specie d time s via OMG. Y ou may ...

  • Asrock Z77 Pro4-M - page 13

    13 1.3 Motherboard Layout 1 CPU Fan Connector (CPU_F AN2) 2 Power Fan Connector (PWR_F AN1) 3 CPU Fan Connector (CPU_F AN1) 4 A TX 12V Power Connector (A TX12V1) 5 1 155-Pin CPU Socket 6 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1, Black) 7 2 x 240-pin DDR3 DIMM Slots (DDR3_A2, DDR3_B2, Black) 8 A TX Power Connector (A TXPWR1) 9 USB 3.0 Header (U ...

  • Asrock Z77 Pro4-M - page 14

    14 1.4 I/O P anel * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description Off No Link Of f 10Mbps connection Blinking Data Activity Orange 100Mbps connection On Link Green 1Gbps connection 1 USB 2.0 Ports (U ...

  • Asrock Z77 Pro4-M - page 15

    15 T o enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header . After restarting your computer , you will nd “Mixer” tool on your system. Please select “Mixer T oolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8 ...

  • Asrock Z77 Pro4-M - page 16

    16 Chapter 2: Installation This is a micro A TX form factor (9.6" x 9.6", 24.4 x 24.4 cm) motherboard. Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physi ...

  • Asrock Z77 Pro4-M - page 17

    17 1 155-Pin Socket Overview 2.3 CPU Installation In order to provide the LGA 1 155 CPU sock- et s m or e p ro te ct io n a nd m ak e t he in st al - la tio n pr oce ss e asi er, AS Ro ck ha s a dd ed a ne w pr otec tion c over o n to p o f th e l oad pla te to r epla ce the for mer Pn P c aps t hat were under the load plate. For the installa - tio ...

  • Asrock Z77 Pro4-M - page 18

    18 Pin1 alignment key alignment key Pin1 1 155-Pin CPU For proper installation, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. C a r e f u l l y p l a c e t h e C P U i n t o t h e socket. Step 2-4. Verify that the CPU is within the sock- et an d p ro per ly m at ed t o t he o ...

  • Asrock Z77 Pro4-M - page 19

    19 2.4 Installation of CPU F an and Heatsink Thi s m other board is e quipp ed wit h 1 15 5-Pi n so cket t hat su ppor ts I ntel 1 1 55-Pi n CPUs. Please adopt the type of heatsink and cooling fan compliant with Intel 1 155- Pin CPU to dissipate heat. Before you install the heatsink, you need to spray ther- mal interface material between the CPU an ...

  • Asrock Z77 Pro4-M - page 20

    20 2.5 Installation of Memor y Modules (DIMM) Thi s mo therb oard p rovid es f our 24 0-pin D DR3 (D ouble Dat a Ra te 3 ) D IMM slots, and supports Dual Channel Memory T echnology . For dual channel cong- uration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pair in the slots: Y ou have t o instal l ...

  • Asrock Z77 Pro4-M - page 21

    21 n o tc h b r ea k n o tc h b r ea k Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only ts in one ...

  • Asrock Z77 Pro4-M - page 22

    22 2.6 Expansion Slots (PCI Express Slots) There are 4 PCI Express slots on this motherboard. PCIE slots: PCIE1 (PCIE 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards, or to install PCI Express graphics cards to support CrossFireX TM function. PCIE2 (PCIE 2.0 x1 slot) is used for a PCI Express x1 lane width card, such as a Gigabi ...

  • Asrock Z77 Pro4-M - page 23

    23 1. If a customer incorrectly congures their system they will not see the performance benets of CrossFireX TM . All three CrossFireX TM components, a CrossFireX TM Ready graphics card, a CrossFireX TM Ready motherboard and a CrossFireX TM Edition co-processor graphics card, must be installed correctly to benet from the CrossFireX TM mult ...

  • Asrock Z77 Pro4-M - page 24

    24 CrossFire Bridge Step 3. Co nnect the DVI monitor cable to the DVI connector on the Radeon graph- ics card on PCIE1 slot. (Y ou may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter .) Step 2. Connect two Radeon graphics cards by installing a CrossFi ...

  • Asrock Z77 Pro4-M - page 25

    25 The Catalyst Uninstaller is an optional download. We recommend using this utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD’s website for AMD driver updates. Step 3. Install the required drivers to your system. For Windows ® XP OS: A. AMD recommends Windows ® XP Service Pack 2 or higher to ...

  • Asrock Z77 Pro4-M - page 26

    26 Although you have selected the option “Enable CrossFire TM ”, the CrossFireX TM function may not work actually . Y our computer will automatically reboot. After restarting your computer , please conrm whether the option “Enable CrossFire TM ” in “A TI Catalyst Control Cent er” is selected or not; if not, please select it again, an ...

  • Asrock Z77 Pro4-M - page 27

    27 2. If you have already installed the onboard VGA driver from our support CD to your system, you can freely enjoy the benets of dual monitor function after your system boots. If you haven’t installed the onboard VGA driver yet, please install the onboard VGA driver from our support CD to your system and restart your computer . 2.8 Dual Monit ...

  • Asrock Z77 Pro4-M - page 28

    28 Surround Display Feature This motherboard supports surround display upgrade. With the internal VGA output support (DVI-D, D-Sub and HDMI) and external add-on PCI Express VGA cards, you can easily enjoy the benets of surround display feature. Please refer to the following steps to set up a surround display environment: 1. Install the PCI Expre ...

  • Asrock Z77 Pro4-M - page 29

    29 For Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS: Right click the desktop, choose “Personalize”, and select the “Display Settings” tab so that you can adjust the parameters of the multi-monitors according to the steps below . A. Click the number ”2” icon. B. Click the items “This is my main monitor” and “Extend the d ...

  • Asrock Z77 Pro4-M - page 30

    30 * ASRock Smart Remote is only supported by some of ASRock's motherboards. Please refer to ASRock's website for the motherboard support list: http://www .asrock.com USB 2.0 header (9-pin, black) CIR header (4-pin, gray) 2.9 ASRock Smart Remote Installation Guide ASR ock S mart R emot e is o nly u sed f or ASRo ck mo therb oard s with C ...

  • Asrock Z77 Pro4-M - page 31

    31 2.10 Jumpers Setup T h e i l l u s t r a t io n s h o w s h o w j u m p e r s a r e setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The i l lu s t r at i o n s h ow s a 3 - pi n j u m p er w h os e pin1 and pin2 are “Short” when jumper cap is placed on the ...

  • Asrock Z77 Pro4-M - page 32

    32 2.11 Onboard Headers and Connectors Onboar d headers and con nectors a re NOT jum pers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial A T A2 Connectors These four Serial A T A2 (SA T A2) (SA T A2_2_3: see p.13, No. 14) connect ...

  • Asrock Z77 Pro4-M - page 33

    33 USB 2.0 Headers Besides four default USB 2.0 (9-pin USB_6_7) ports on the I/O panel, there are (see p.13, No. 25) three USB 2.0 headers on this motherboard. Each USB 2.0 head er ca n supp ort tw o USB 2.0 ports. (9-pin USB_8_9) (see p.13, No. 24) (9-pin USB_10_1 1) (see p.13, No. 23) USB 3.0 Header Besides two default USB 3.0 (19-pin USB3_12_13) ...

  • Asrock Z77 Pro4-M - page 34

    34 Front Panel Audio Header This is an interface for front (9-pin HD_AUDIO1) panel audio cable that allows (see p.13, No. 33) convenient connection and control of audio devices. J _ S EN SE O U T 2_ L 1 M I C _R ET P R E SE NC E# G ND O U T 2_ R M I C 2_ R M I C 2_ L O UT _R ET 1. High Denition Audio supports Jack Sensing, but the panel wire on ...

  • Asrock Z77 Pro4-M - page 35

    35 PLED (System Power LED): Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the sys- tem is in S1/S3 sleep state. The LED is of f when the system is in S4 sleep state or powered off (S5). HDLED (Hard Drive Activity LED): Connect to the hard drive activity LED ...

  • Asrock Z77 Pro4-M - page 36

    36 CPU Fan Connectors Please connect the CPU fan (4-pin CPU_F AN1) cable to the connector and (see p.13, No. 3) match the black wire to the ground pin. (3-pin CPU_F AN2) (see p.13, No. 1) A TX Power Connector Please connect an A TX power (24-pin A TXPWR1) supply to this connector . (see p.13, No. 8) 20-Pin A TX Power Supply Installation Though this ...

  • Asrock Z77 Pro4-M - page 37

    37 Serial port Header This COM1 header supports a (9-pin COM1) serial port module. (see p.13, No. 27) HDMI_SPDIF Header HDMI_SPDIF header , providing (2-pin HDMI_SPDIF1) SPDIF audio output to HDMI (see p.13, No. 34) VGA card, allows the system to connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA car ...

  • Asrock Z77 Pro4-M - page 38

    38 2.12 Serial A T A (SA T A) / Serial A T A2 (SA T A2) Hard Disks Installation This motherboard adopts Intel ® Z77 chipset that supports Serial A T A (SA T A) / Serial A T A2 (SA T A2) hard disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and Intel Smart Response T echnology) functions. Y ou may install SA T A / SA T A2 hard d ...

  • Asrock Z77 Pro4-M - page 39

    39 2.14 Hot Plug and Hot Swap F unctions for SA T A / SA T A2 HDDs This motherboard supports Hot Plug and Hot Swap functions for SA T A / SA T A2 in RAID / AHCI mode. Intel ® Z77 chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming interface for SA T A host controllers developed through a joint industr ...

  • Asrock Z77 Pro4-M - page 40

    40 Caution 1. Without SA T A 15-pin power connector interface, the SA T A / SA T A2 / SA T A3 Hot Plug cannot be processed. 2. Even some SA T A / SA T A2 / SA T A3 HDDs provide both SA T A 15-pin power connector and IDE 1x4-pin conventional power connector interfaces, the IDE 1x4-pin conventional power connector interface is denitely not able to ...

  • Asrock Z77 Pro4-M - page 41

    41 How to Hot Plug a SA T A / SA T A2 / SA T A3 HDD: Points of attention, before you process the Hot Plug: Please do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SA T A / SA T A2 / SA T A3 HDD damage and data loss. Connect SA T A data cable to the motherboard’s SA T A2 / SA T A3 connector . Connect ...

  • Asrock Z77 Pro4-M - page 42

    42 2.17 Driver Installation Guide T o install the drivers to your system, please insert the support CD to your optical drive rst. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from top to bottom to install those required drivers. Therefore, the drivers you insta ...

  • Asrock Z77 Pro4-M - page 43

    43 2.19 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit Without RAID Functions If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit OS on your SA T A / SA T A2 / SA T A3 HDDs without RAID functions, please follow the procedures below according to the OS you install. 2.19.1 Ins ...

  • Asrock Z77 Pro4-M - page 44

    44 2.19.2 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit Without RAID Functions If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your SA T A / SA T A2 / SA T A3 HDDs without RAID functions, please follow the steps below . Using SA T A / SA T A2 / SA T A3 HDDs with NCQ function STEP 1: Set Up UEFI. A ...

  • Asrock Z77 Pro4-M - page 45

    45 Chapter 3: UEFI SETUP UTILITY 3.1 Introduction This section explains how to use the UEFI SETUP UTILITY to congure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY . Y ou may run the UEFI SETUP UTILITY when you start up the computer. Please press <F2> o r <De l> d uring the Power- On-Self- T e st (P OST) ...

  • Asrock Z77 Pro4-M - page 46

    46 3.1.2 Navigation K eys Please check the following table for the function description of each navigation key . Navigation Key(s) Function Description / Moves cursor left or right to select Screens / Moves cursor up or down to select items + / - T o change option for the selected items <T ab> Switch to next function <Enter> T o bring u ...

  • Asrock Z77 Pro4-M - page 47

    47 3.3 OC T weak er Screen In the OC T weaker screen, you can set up overclocking features. CPU Conguration CPU T urbo Ratio Use this item to change the ratio value of this motherboard. Host Clock Override (BCLK) Use this to adjust the host clock (BCLK) frequency . The default value is [Auto]. Spread Spectrum This item should always be [Auto] fo ...

  • Asrock Z77 Pro4-M - page 48

    48 Internal PLL Overvoltage Use this item to enable/disable CPU Internal PLL Overvoltage Function. Long Duration Power Limit Use this item to congure long duration power limit in watts. The default value is [Auto]. Long Duration Maintained Use this item to congure time window which the long duration power is maintained. The default value is [ ...

  • Asrock Z77 Pro4-M - page 49

    49 DRAM tCL Use this item to change CAS# Latency (tCL) Auto/Manual setting. The default is [Auto]. DRAM tRCD Use this item to change RAS# to CAS# Delay (tRCD) Auto/Manual setting. The default is [Auto]. DRAM tRP Use this item to change Row Precharge T ime (tRP) Auto/Manual setting. The default is [Auto]. DRAM tRAS Use thi s item to chang e RAS# Act ...

  • Asrock Z77 Pro4-M - page 50

    50 ODT WR (CH B) Use this item to change ODT WR (CH B) setting. The default is [Auto]. ODT NOM (CH A) Use this item to change ODT NOM (CH A) setting. The default is [Auto]. ODT NOM (CH B) Use this item to change ODT NOM (CH B) setting. The default is [Auto]. MRC Fast Boot Use this ite m to ena ble or d isable M RC Fast Boot. The def ault is [Enable ...

  • Asrock Z77 Pro4-M - page 51

    51 Setting wrong values in this section may cause the system to malfunction. 3.4 Advanced Screen In this section, you may set the congurations for the following items: CPU Congu- ration, North Bridge Conguration, South Bridge Conguration, Intel(R) Rapid Start T echno logy , Intel( R) Smar t Conn ect T echno logy , Stora ge Con gurati ...

  • Asrock Z77 Pro4-M - page 52

    52 3.4.1 CPU Configuration Intel Hyper Threading T echnology T o enable this feature, a computer system with an Intel processor that sup- ports Hyper-Threading technology and an operating system that includes optimization for this technology , such as Microsoft ® Windows ® XP / Vista TM / 7 is required. Set to [Enabled] if using Microsoft ® Wind ...

  • Asrock Z77 Pro4-M - page 53

    53 to the IA-32 Intel Architecture. An IA-32 processor with “No Execute (NX) Memory Protection” can prevent data pages from being used by malicious software to execute codes. This option will be hidden if the current CPU does not support No-Excute Memory Protection. Intel Virtualization T echnology When this option is s et to [Enabled], a VMM ( ...

  • Asrock Z77 Pro4-M - page 54

    54 3.4.2 North Bridge Configuration Primary Graphics Adapter This allows you to select [Onboard] or [PCI Express] as the boot graphic adapter priority . The default value is [PCI Express]. VT -d Use this to enable or disable Intel ® VT -d technology (Intel ® Virtualization T echnology for Directed I/O). The default value of this feature is [Disab ...

  • Asrock Z77 Pro4-M - page 55

    55 3.4.3 South Bridge Configuration Onboard HD Audio Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is plugged. Front Panel Select [Auto] or [Disabled] for the onboard HD Audio Front Panel. On/Off Play U se t his item to en able or d isable O n ...

  • Asrock Z77 Pro4-M - page 56

    56 3.4.4 Intel(R) Rapid Start T echnology Intel(R) Rapid Start T echnology Use this item to enable or disable Intel(R) Rapid Start T echnology . Intel(R) Rapid Start T echnology is a new zero power hibernation mode which al- lows users to resume in just 5-6 seconds. The default is [Disabled]. ...

  • Asrock Z77 Pro4-M - page 57

    57 3.4.5 Intel(R) Smart Connect T echnology Intel(R) Smart Connect T echnology Use thi s i tem t o e nabl e o r d isab le In tel( R) Sm art C onne ct T echn olog y . Intel(R) Smart Connect T echnology keeps your e-mail and social ne tworks, such as T witter , Facebook, etc. updated automatically while the computer is in sleep mode. The default is [ ...

  • Asrock Z77 Pro4-M - page 58

    58 3.4.6 Storage Configuration SA T A Controller(s) Use this item to enable or disable the SA T A Controller feature. SA T A Mode Selection This item is for SA T A3_0, SA T A3_1 and SA T A2_2 to SA T A2_5 ports. Use this to select SA T A mode. Conguration options: [IDE Mode], [AHCI Mode] and [RAID Mode]. The default value is [AHCI Mode]. AHC I ( ...

  • Asrock Z77 Pro4-M - page 59

    59 3.4.7 Super IO Configuration Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Conguration options: [3F8h / IRQ4] and [3E8h / IRQ4]. Infrared Port Use this item to enable or disable the onboard infrared port. Parallel Port Use this item to ...

  • Asrock Z77 Pro4-M - page 60

    60 3.4.8 ACPI Configuration Suspend to RAM Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Selecting [Auto] will enable this feature if the OS supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. ACPI HPET T able Use this item to enable or disable ACPI HPET T able. The d ...

  • Asrock Z77 Pro4-M - page 61

    61 OMG (Online Management Guard) Administrators are able to establish an internet curfew or restrict internet access at spec ied times via OMG. Y ou may choose from [Every day], [Day of the week] or [Weekdays and weekends], then schedule the starting and ending hours of internet access granted to other users. In order to prevent users from bypas ...

  • Asrock Z77 Pro4-M - page 62

    62 3.5 Hardware Health Event Monitoring Screen In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan 1 & 2 Setting This allows you to set CPU fan 1 & 2’ s speed. Con? ...

  • Asrock Z77 Pro4-M - page 63

    63 3.6 Boot Screen In this section, it will display the available devices on your system for you to cong- ure the boot settings and the boot priority . Setup Prompt Timeout T hi s s h ow s t he n um b er o f s e co n ds t o w a it f o r s et u p a c ti v a ti o n k e y . 65535(0XFFFF) means indenite waiting. Bootup Num-Lock If this item is se ...

  • Asrock Z77 Pro4-M - page 64

    64 3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. ...

  • Asrock Z77 Pro4-M - page 65

    65 3.8 Exit Screen Save Changes and Exit When you select this option, the following message “Save conguration changes and exit setup?” will pop-out. Select [Y es] to save the changes and exit the UEFI SETUP UTILITY . Discard Changes and Exit When you select this option, the following message “Discard changes and exit setup?” will pop-out ...

  • Asrock Z77 Pro4-M - page 66

    66 Chapter 4: Sof tware Support 4.1 Install Operating System This motherboard supports various Microsoft ® Windows ® operating systems: 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit. Because motherboard settings and hardware options vary , use the setup procedures in this chapter for general refer- ence only . Refer to your OS docume ...

  • Asrock Z77 Pro4-M - page 67

    67 Installing OS on a HDD Larger Than 2TB in AHCI Mode This motherboard adopts UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP2 or above) or Windows ® 7 64-bit (with SP1 or above) . 2 ...

  • Asrock Z77 Pro4-M - page 68

    68 Installing OS on a HDD Larger Than 2TB in RAID Mode This motherboard adopts UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP2 or above) or Windows ® 7 64-bit (with SP1 or above) . 2 ...

  • Asrock Z77 Pro4-M - page 69

    69 If you i nsta ll Win dows ® 7 6 4-bit / Vi sta TM 64 -bit o n a l arge har d dis k (ex . Disk volume > 2TB), it may take more time to boot into Windows ® or install dr iver /ut ili ties . I f yo u en cou nte r th is p rob lem, yo u wi ll n eed t o f ollo w t he instructions below to x this problem. Windows ® Vista TM 64-bit: Microsoft ? ...

  • Asrock Z77 Pro4-M - page 70

    70 B. Disable “V olume Shadow Copy” service. a. T ype “computer management” in the Start Menu, then press “Enter”. b. Go to “Ser vices and A pplications >Services”; Then d ouble click “V olume Shadow Copy”. ...

  • Asrock Z77 Pro4-M - page 71

    71 c. Set “Startup type” to “Disable” then Click “OK”. C. Reboot your system. D. After reboot, please start to install motherboard drivers and utilities. Windows ® 7 64-bit: A. Please request the hotx KB2505454 through this link: http://support.microsoft.com/kb/2505454/ B. After installing Windows ® 7 64-bit, install the hotx kb ...

Производитель Asrock Категория Motherboard

Документы, которые мы получаем от производителя устройства Asrock Z77 Pro4-M мы можем разделить на несколько групп. Это в частности:
- технические чертежи Asrock
- инструкции обслуживания Z77 Pro4-M
- паспорта изделия Asrock
- информационные брошюры
- энергетические этикетки Asrock Z77 Pro4-M
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Asrock Z77 Pro4-M.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Asrock Z77 Pro4-M, инструкции обслуживания, короткие инструкции или инструкции пользователя Asrock Z77 Pro4-M. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Asrock Z77 Pro4-M.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Asrock Z77 Pro4-M, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Asrock Z77 Pro4-M пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Asrock Z77 Pro4-M.

Полная инструкция обслуживания Asrock, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Asrock Z77 Pro4-M - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Asrock Z77 Pro4-M, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Asrock Z77 Pro4-M, которое найдем в данном документе
3. Советы по использованию основных функций устройства Asrock Z77 Pro4-M - которые должны облегчить нам первые шаги во время использования Asrock Z77 Pro4-M
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Asrock Z77 Pro4-M
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Asrock Z77 Pro4-M в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Asrock Z77 Pro4-M?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Asrock Z77 Pro4-M, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Asrock Z77 Pro4-M со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)