-
Allnet ALL6600 iSCSI - page 1
ALLNET ALL6600 iSCSI User’s Manual ...
-
Allnet ALL6600 iSCSI - page 2
2 Copyright and T rademark Notice ALLNET and other names of ALLNET prod ucts are registered trademarks of ALLNET Technology Corp. Mi crosoft, Windows, and the Windows logo a re registered trademarks of Microsoft Corporation. Apple, iTunes and A pple OS X are registered trademarks of Apple Computers, Inc. All other trademarks and brand names are the ...
-
Allnet ALL6600 iSCSI - page 3
3 Safety W arnings For your safety, please read and fo l low the foll owing safety warnings: Read this manual t horoughly bef ore attempting to set up your AL L6600 iSCSI. Your ALL6600 iSCSI is a compl icated electronic device. DO NOT attempt to repair it under any circumstances. In the case of malfunction, turn off the power immediately and have i ...
-
Allnet ALL6600 iSCSI - page 4
4 T able of Content s Copyright and Tr ademark Notice ................................................... 2 About This Manual ......................................................................... 2 Limited Warranty........................................................................... 2 Safety Warnings ...................................... ...
-
Allnet ALL6600 iSCSI - page 5
5 Storage Management .......................................................................... 26 Disks Info rmation ............................................................................... 26 S.M.A.R.T. In formation ............................................................................... 26 RAID List ................................ ...
-
Allnet ALL6600 iSCSI - page 6
6 Overview ............................................................................................. 59 Login Page........................................................................................... 59 Using WebDisk .................................................................................... 59 Mapping a Client PC to th e ALL6600 ...
-
Allnet ALL6600 iSCSI - page 7
7 What is Active Directory? .................................................................... 81 ADS Benefits........................................................................................ 81 Appendix E: UPS Compatibility List .............................................. 82 Appendix F: Licensing Information ........................... ...
-
Allnet ALL6600 iSCSI - page 8
8 Chapter 1: Introduction Overview Thank you for choosing the A LLNET A LL6600 iSCSI IP Storage Server. The ALLNET ALL6600 iSCSI is an easy-to-use st orage server that allows a dedicated approach to storing and distri buting data on a network. Data reliability i s ensured with RAID features that provide data se curity and recovery—over one Teraby ...
-
Allnet ALL6600 iSCSI - page 9
9 Multiple RAID ALL6600 iSCSI supports multiple RAID volumes on o ne system. So, you can create RAID 0 for your non-critical data , and create RAID 5 for mission-critical data. Create the RAID levels depending on your needs. To configure RAID modes on the ALL6600 iSCSI, refer to Chapter 4: System Managem ent > Sto rage Mana gement > RAID List ...
-
Allnet ALL6600 iSCSI - page 10
10 Front Panel The ALLNET ALL6600 iSCSI’s front panel ha s the device’s controls, indicators, and hard disk trays: Front Panel Item Description 1. DOM LED • Solid orange: system is being upgraded 2. WAN LED • Solid green: network link • Blinking green: network activity 3. LAN LED • Solid green: network link • Blinking green: network a ...
-
Allnet ALL6600 iSCSI - page 11
11 Hard Disk Trays Each of the ALL6600 iSCSI’s hard disk trays has a lock, a latch, and two LED indicators: Hard Disk Trays Item Description Lock • Use the lock to physically secure the hard disk to the unit Latch • Use to open and remove or close and secure the tray HDD Power LED • Solid blue: hard disk is powered on HDD Access/Error LED ? ...
-
Allnet ALL6600 iSCSI - page 12
12 Chapter 2: Hardware Inst allation Overview Your ALL6600 iSCSI is designed for easy inst allation. To help you get start ed, the following chapter will help you quickly get your ALL6600 iSCSI up and running. Please read it carefully t o prevent damaging you r unit during in stallation. Before You Begin Before you begin, be sure to ta ke the follo ...
-
Allnet ALL6600 iSCSI - page 13
13 Cable Connections To connect the ALL6600 iSCS I to your network, fo llow the steps below: 1. Connect an Ethernet cable from your network to the WAN port on the back panel of the ALL6600 iSCSI. 2. Connect the provided p ower cord into the universal power socket on the back panel. Plug the other end of the cord into a surge protector socket. Press ...
-
Allnet ALL6600 iSCSI - page 14
14 Checking System Status After making connections on the ALL6600 iSCSI and powering up, check whether the system status is no rmal or has trou ble by observing indicators on the front panel and hard disk trays. System Status Normal The system status is normal if: 1. The WAN and LAN L EDs glow green (assuming both are connected). 2. The Power LED o ...
-
Allnet ALL6600 iSCSI - page 15
15 Chapter 3: First T ime Setup Overview Once the hardware is installed, ph ysically connected to your network , and powered on, you can configure the ALL6600 iS CSI so that it is accessible to your network users. There are two ways to set up your ALL660 0 iSCSI: using the ALLNET Setup Wizard or the LCD display . Follow the steps below for initia l ...
-
Allnet ALL6600 iSCSI - page 16
16 5. Login with the admini strato r account and pass word. Username: admin Password: admin 6. Name your ALL6600 iSCSI and configure the network I P address. If your switch or router is configured as a DHCP Server, configuring the ALL6600 iSCSI to automatically obt ain an IP address is recommended. You may also use a static IP address and en ter th ...
-
Allnet ALL6600 iSCSI - page 17
17 8. Finished! Access the ALL6600 iSCSI Web Administrator Interface by pressing the Start Browser button. You can also configure another ALL6600 iSCSI at this point by clicking the Setup Other Device button. Press Exit to ex it the wizard. LCD Operation The ALL6600 iSCSI is equipped with an LC D on the front for easy status display and setup. Ther ...
-
Allnet ALL6600 iSCSI - page 18
18 System Fan Current system fan status. 2006/06/16 12:00 Current system time. The ALL6600 iSCSI will rot ate these messages every tw o seconds on the LCD display. USB Copy The USB Copy function enables you to copy files stored on USB devices such as USB disks and digital cameras to the ALL 6600 iSCSI with a press of a button. To use USB copy, foll ...
-
Allnet ALL6600 iSCSI - page 19
19 For details on how to c onfigure yo ur network settings, refe r to Chapter 4: System Management > Network Management . Step 2: RAID Creation Next, administrators can con figure their preferred RAID setting and build their RAID volume. You can access RAID settings from the me nu bar of the Web Administration Interface by navi gating to Stor ag ...
-
Allnet ALL6600 iSCSI - page 20
20 Printer Server ...
-
Allnet ALL6600 iSCSI - page 21
21 Chapter 4: System Management Overview The ALL6600 iSCSI provides an easily accessible Web Administration Int erface . With it, you can configure and monito r the ALL6600 iSCSI anywhere on the network. Web Administration Interface Make sure your network is connected to the Internet. To access the ALL6600 iSCSI Web Administration Interface : 1. Ty ...
-
Allnet ALL6600 iSCSI - page 22
22 Storage Information and settings for storage devices installed into the ALL6600 iSCS I. Network Information and settings for network connections, as well as various services of the ALL6600 iSCS I. Accounts Allows configuration of users and groups. System Various ALL6600 iSCS I system settings and informati on. Language Choose your preferred lang ...
-
Allnet ALL6600 iSCSI - page 23
23 Status Menu The Status Menu o n the menu bar all ows yo u to see various aspects of the ALL6600 iSCSI. From here, you can discove r the status of the ALL6600 iSCSI, and even find out othe r details like firmware version and up time. Product Information Once you login, you will first see the basi c Product Information screen providing Manufacture ...
-
Allnet ALL6600 iSCSI - page 24
24 System Fan Speed Displays the current status of the system fan. Memory Size Shows the system memory capacity. Up Time Shows how long the system has been running. Service Status Item Description AFP Status The status of Apple Filing Protocol server. NFS Status The status of Network File Service Server. SMB/CIFS Status The status of SMB/CIFS serve ...
-
Allnet ALL6600 iSCSI - page 25
25 Printer Status Item Description Manufacturer Displays the name of the USB printer manufacturer. Model Displays t he mode l of the USB p rinter. Status Displays the status of the USB printer. Printer Queue Click to remove all documents from printer queue If a corrupt print job is sent to a printer, printing may su ddenly fail. If your print jobs ...
-
Allnet ALL6600 iSCSI - page 26
26 Storage Management The Storage Menu displays the status of storage dev ices installed in th e ALL6600 iSCSI, and includes storage config uration options such as R AID and disk settings, folder configuration, and Nsync settings. Disks Information From the Storage menu, choose the Disks item and the Dis ks Information screen appears. From here, yo ...
-
Allnet ALL6600 iSCSI - page 27
27 Reallocated Sector Count Count of reallocated sectors. When the hard drive finds a read/w rite/ver ificatio n erro r, it mark s this s ector a s "reallo cated " and transfers data to a special reserved area (spare area). This process is also known as remappi ng and "reallocated" sectors are called remaps. This is why, on a mo ...
-
Allnet ALL6600 iSCSI - page 28
28 RAID Configuration On the RAID List screen, press the RAID Config button to go to the RAID Configuration screen. In addition to RAID disk information an d status, this screen lets you make RAID configuration settings. For more information on RAID, see Appendix C: RAID Basics . RAID Level You can set the storage volume as JBOD , RAID 0 , RAID 1 , ...
-
Allnet ALL6600 iSCSI - page 29
29 RAID Settings Using RAID Settings , you can select stri pe size, choose which disks are RAID disks or the Spare Disk, as well as enter a name for each di sk. RAID Settings Item Description RAID Check the boxes of the hard drives you wish to add to the storage volume. Master RAID Check a box to designate the replacement HDD for the storage volume ...
-
Allnet ALL6600 iSCSI - page 30
30 With a RAID 1, 5, 6, or 10 volume, you can also add a spare disk after the RAID is created. See Chapter 7: Tips and Tricks > Adding a Spare Disk for details. Expanding a RAID To expand a RAID 1, 5, 6, or 10 volume, f ollow the st eps below: 1. Replace one of the hard drives in t he RAID volume and allow it to automatically rebuild. 2. Once re ...
-
Allnet ALL6600 iSCSI - page 31
31 Capacity Capacity of the allocated space. Target USB Click to allocate space to Target USB volume. iSCSI Targ et Click to al locate space t o iSCSI volu me. Allocating Space for Target USB Volume To allocate space for a Target USB volume on the current RAID volume, f ollow the steps below: 1. Under the Volume Allocation List , click Target USB . ...
-
Allnet ALL6600 iSCSI - page 32
32 The Create iSCSI Volume screen appears. Create iSCSI Volume Item Description RAID ID ID of current RAID vo lume. Unused Percenta ge and amount of unused space on current RAID volume. Allocation Percentage and amount of space all ocated to Target USB volume. iSCSI Target Service Enable or Disable the iSCSI Target service. Authentication You may c ...
-
Allnet ALL6600 iSCSI - page 33
33 Folder Management From the Storage menu, choose Folder , and the Folder screen appears. This screen allows you to create and configure folders on the ALL6600 iSCSI volume. Folder Item Description Folder name Displays the name of the folder. Description Provides a description of the folder. NFS Share Press NFS Share to configure which hosts on th ...
-
Allnet ALL6600 iSCSI - page 34
34 Add Folder Item Description RAID ID RAID volu me where the new folder will reside. Folder Name Enter the name of the folder. Descrip tion Provid e a desc ription the f older. Browseable Enable or disable users from browsing the folder contents. If Yes is selected, then the share folder will be browseable. Public Admit or de ny pub lic acce ss to ...
-
Allnet ALL6600 iSCSI - page 35
35 NFS Share To allow NFS access to the share folder, enable the NFS Service , a nd then set up hosts with access rights. NFS Share Item Description Hostname Enter the name of the Host or IP address Privilege Host has either read only or writeable access to the folder. Root Access Access the data on root directory of the RAID. Folder Access Control ...
-
Allnet ALL6600 iSCSI - page 36
36 3. Continue selectin g groups and user s and assigning them access levels using the column buttons. 4. To remove a group or user from a n access level column, press the Remove button in that column. 5. When you are finished, press Sub mit to submit and confirm your ACL settings. File System Check The File System Check allows you to perform a che ...
-
Allnet ALL6600 iSCSI - page 37
37 Network Management Use the Netwo rk menu to make network configuration settings as well as service support settings. WAN Configuration From the Netwo rk menu, choose WAN , and the WAN Configuration scree n appears. This screen displays the network parameters of the WAN connection. You may change any of th ese items and press Apply to confir m yo ...
-
Allnet ALL6600 iSCSI - page 38
38 LAN Configuration The ALL6600 iSCSI supports two Gigabit Ethernet ports for higher service availability. To configure these ports, choose LAN from the Networ k menu, and the LAN Configuration screen appears. Press Appl y to save your changes. LAN Configuration Item Description MAC Address Displays the MAC address of the LAN interface. IP Specifi ...
-
Allnet ALL6600 iSCSI - page 39
39 Web Services Configuration From the Netwo rk menu, choose the Service item, and the Web Servi ce screen appears. This screen displays the service support parameters of the system. You can change any of these items and press Apply to confirm your settings. A description of each item follow s: Web Service Item Description HTTP (WebDisk) Support En ...
-
Allnet ALL6600 iSCSI - page 40
40 NFS Setup From the Netwo rk menu, choose the NFS item, and the NFS Server Set ting screen appears. The ALL6600 iSCSI can act as an NFS server, enabling users to download and upload files w ith the favorite NFS clients. Press A pply to confirm your settings. A description of each item follows: NFS Server Sett ing Item Description NFS Server If yo ...
-
Allnet ALL6600 iSCSI - page 41
41 User and Group Management The ALL6600 iSCSI has bu ilt-in user dat abase that allows admin istrators to manage user access using differe nt group policies. From the Accounts menu, you can create, modify, and delete users, and assign them to groups that you designate. Local User Configuration From the Accounts me nu, choose the Users item, and th ...
-
Allnet ALL6600 iSCSI - page 42
42 Modifying Users 1. Select an existing user from the Local User Configuration screen. 2. Click on the Modify bu tton, and Local User Setting screen appears. 3. From here, you can enter a new password and re-enter to confirm, or use the << or >> buttons to have this user join or le ave a group. Click the Apply button to save your chang ...
-
Allnet ALL6600 iSCSI - page 43
43 Adding Groups 1. On the Local Group Configuration screen, click on the Add button. 2. The Local Group Setting screen appears. 3. Enter a Group Name , and select users to be in this group from the Users List by adding them to the Members List using the << b utton. 4. Click the Apply button to save yo ur changes. Modifying Groups 1. On the L ...
-
Allnet ALL6600 iSCSI - page 44
44 ADS/NT Configuration If you have a Windows Active Directory Server (ADS) or Windows NT server to handle th e domain security in your network, you can si mply enable the ADS/NT support feature; the ALL6600 iSCSI will con nect with th e ADS/NT server and get all the info rmation of the domain users and groups auto matically. From the Accounts menu ...
-
Allnet ALL6600 iSCSI - page 45
45 System Settings The System menu give s you a wealth of set tings that you ca n use to configure your ALL6600 iSCSI’s system administrati on functions. You can set up sys tem notifications, view s ystem logs, and even upgrade firmware from this menu. System Notifications From the System menu, choose the Notification item, and the Notific ation ...
-
Allnet ALL6600 iSCSI - page 46
46 System Logs Item Description Trunc ate All Log F ile Clear a ll log files . |<< < > >>| Use the forward ( > >>| ) and backward ( |<< < ) buttons to browse the log pages. INFO Provides all log information incl uding warning messages and error messages. WARN Shows all warning messages and error messages. ERROR S ...
-
Allnet ALL6600 iSCSI - page 47
47 System Configuration Backup and Restore From the System menu, choose the Config Mgmt item and the System Configuration Download/Upload screen appears. From here, you can download or upload stored system configurations. See the following table for a detailed description of each item. System Configuration Download/Upload Item Description Download ...
-
Allnet ALL6600 iSCSI - page 48
48 Upgrading System Firmware From the System menu, choose the Firmware Upgrade item and the Firmware Upgrade screen appears. Follow the steps below to upgrade your firmware: 1. Use the Browse button to find the firmware file . 2. Press Apply . 3. The beeper beeps and the Busy LED blinks unt il the upgrade is complete. Change Administrator Password ...
-
Allnet ALL6600 iSCSI - page 49
49 Reboot and Shutdown System From the System menu, choose Reboot & Shut down item, and the Shutdown/Reboot System screen appears. Press Reboot to restart the system or Shutdown to turn the system off. ...
-
Allnet ALL6600 iSCSI - page 50
50 Scheduled Power On/Off You may also designate a schedule for the ALL6600 iSCSI to turn on and of f. To do this, first enable the feature by checking the Enable Timer checkbox. Then, simply choose an on and off ti me for each day of the week that you would like to designate a schedule by using the various dropdowns. Finally, click Apply to save y ...
-
Allnet ALL6600 iSCSI - page 51
51 Chapter 5: Additional Feature Setup Overview The ALL6600 iSCSI can also act as an FT P Server, allowing employees and clients to transfer files using thei r favorite FT P programs. The integrated Print Server allows you to share a single USB printe r with all users on the network. The following section shows you how. FTP Server ALL6600 iSCSI can ...
-
Allnet ALL6600 iSCSI - page 52
52 Media Server With the built-in Media Server capability, the ALL6600 iSCSI provides media streaming service to stand-alone networked home media adapters that support the UPnP AV protocol or are Digital Living Network Alliance (DLNA) standard compliant. With the ALL6600 iSCSI’s built-in media server capability, you can share digital media such a ...
-
Allnet ALL6600 iSCSI - page 53
53 Connecting DMAs to the Media Server Next, it’s time to con nect your Dig ital Media Adapter (DMA) to the m edia server: 1. Connect your DMA to your Medi a Server a. Configure your DMA to use a Dynami c IP address. The IP address will be assigned by the router. b. Some DMAs are wireless enabled. You can connect the DM A to a wireless router. Fo ...
-
Allnet ALL6600 iSCSI - page 54
54 Printer Server You can configure the ALL6600 iSCSI to act as a printer server. That way, all PCs connected to the network can utilize the same printer. Windows XP SP2 To set up the Printer Server in Wi ndows XP SP2, follow the steps below : 1. Connect the USB printe r to one of the USB ports (preferably the rear USB ports; front USB ports can be ...
-
Allnet ALL6600 iSCSI - page 55
55 Windows Vista To set up the Printer Server in Win dows Vista, follow th e steps below: 1. Open Printer Folder from the Control Panel . 2. Click the right mouse b utton in anywhere on t he Printers folder and then select Add Printer . 3. Select Add a network, wireless o r Bluetooth printer . ...
-
Allnet ALL6600 iSCSI - page 56
56 4. Select The printer that I want isn’t listed . You can press Th e printer that I want isn’t listed to go into nex t page without waiti ng for Searching for available printers to fi nish. 5. Click Select a shared printer by name . Type http://<ALLNET_NAS>:631/printers/usb-printer in the box, where <ALLNET_NAS_IP> is the IP addre ...
-
Allnet ALL6600 iSCSI - page 57
57 6. Select or install a printer and then press OK . If your printer model is not list ed, please contact your print er manufacturer for help. 7. Windows will attempt t o connect to th e printer. 8. You can choose to set this printer as the defaul t printer by checking the Set as the default printer box. Cli ck Next to contin ue. ...
-
Allnet ALL6600 iSCSI - page 58
58 9. Done! Click Finish . ...
-
Allnet ALL6600 iSCSI - page 59
59 Chapter 6: Using the ALL6600 iSCSI Overview Once the ALL6600 iSCSI is setup and op erating, users on the network may manage all varieties of digital music, photos, or f iles by simply using their w eb browsers. To manage your personal file s or access public files on the ALL6600 iSCSI, just enter its IP address into you r browser (default IP add ...
-
Allnet ALL6600 iSCSI - page 60
60 7. To upload a fil e from your computer to the c urrent folder, press the Ne w file (upload) button. When the scree n appears, press Browse and locate the file to upload. P ress OK and the file is uploaded t o the current folder. 8. To delete a file or folde r, select t he file or folder’ s check box. Pr ess the Delete selected it ems button. ...
-
Allnet ALL6600 iSCSI - page 61
61 4. When MAC OS X has co nnected to the ALL6600 iSCSI successfully, an icon representing the f older will appear on th e MAC OS X desktop. You can access the folder by double clickin g on the icon. Mapping the ALL6600 iSCSI as an iSCSI Drive With the ALL6600 iSCSI, you are able to ma p it as an iSCSI drive. With iSCSI, you can remotely access the ...
-
Allnet ALL6600 iSCSI - page 62
62 4. Leave the default selection s and click Next . 5. Read the license agreement. To continue with the installation, click I Agree and then click Next . 6. The iSCSI Init iator will now in stall automat ically. Click Finish once completed. 7. Start the iSCSI Init iator by double-click ing its icon on the desktop. T he iSCSI Initiator propert ies ...
-
Allnet ALL6600 iSCSI - page 63
63 8. Select the Discovery tab. Under Target Po rtal s , click Add . 9. Enter the IP address of the ALL660 0 iSCSI. Click OK . 10. On the iSCSI Initiator Properties window, s elect the Targets tab. With the iSCSI target highlighted, click Log On . The Log On to Target dialogue will appear. ...
-
Allnet ALL6600 iSCSI - page 64
64 11. If you have not enabled CHAP, click OK to continue. If you have enable d CHAP, click Advanced . Under Advanced Settings, check the CHAP lo gin inf ormat ion checkbox and enter your username and password. Click OK . 12. Right click My Computer on the desktop and select Manage . ...
-
Allnet ALL6600 iSCSI - page 65
65 13. Click on Disk Management and you will see a new hard disk listed. 14. Initialize t he new hard disk and you will th en be able to use the iSCSI target as a local drive. Windows Vista Because Windows Vista has th e Microsoft iSCSI Initiator pre- installed, you will not have to install th is piece of software. In stead, start the iSCSI In itia ...
-
Allnet ALL6600 iSCSI - page 66
66 Adding an Nsync Task From the Nsync Inform atio n screen, click Add to display the Add Nsync Task screen. Add Nsync Task Item Description Task Name The name of your Nsync ta sk. Manufacturer Select whether the target is an ALLNET Product (e.g. ALL6600 iSCSI) or FTP server. Target Server IP Address The IP address of your target server. Source Fol ...
-
Allnet ALL6600 iSCSI - page 67
67 From the Netwo rk menu, choose the Nsync Target item, and the Nsync Targe t Se rver S ett ing screen appears. Nsync Target Server Setting Item Description Nsync Target Server Enable or Disable Nsync Target support. ALLNET Backup Utility The ALLNET Backu p Utility is on your In stallation CD. Wh en you click on the CD, the Backup Utility will be ...
-
Allnet ALL6600 iSCSI - page 68
68 Windows XP Data Backup If you use Windows XP Prof essional, you can also use the Window s Backup Utility (Ntbackup.exe) to backup your files. If you use Windows XP Home Ed ition, follow th ese steps to install th e utility: 1. Insert the Windows XP CD into a drive and dou ble-click the CD icon in My Computer . 2. When the Welcome to Microsoft Wi ...
-
Allnet ALL6600 iSCSI - page 69
69 Chapter 7: T ip s and T ricks USB and eSATA Storage Expansion The ALL6600 iSCSI supports external USB har d disks through its three USB ports. Once a USB hard disk has successfully mounted, the ent ire volume will be copied automatically to the default USB HDD fold er. The ALL6600 iSCSI supports up to 6 USB external storage devices. All file nam ...
-
Allnet ALL6600 iSCSI - page 70
70 Remote Administration You can set up your ALL6600 iSCS I for remote administrati on. With remote administration, you can access your ALL 6600 iSCSI over the Inter net, even if your ALL6600 iSCSI is behind a router. Thi s is especially useful i f you are traveling and suddenly need a f ile from your ALL6600 iSCSI. Setting up remote administrat io ...
-
Allnet ALL6600 iSCSI - page 71
71 Part III - Setting up Firewall Rules 1. Navigate to Firewall Rules 2. Click on the butt on Add 3. Select the service HTTPS 4. Enter the IP-address of the ALL660 0 iSCSI 5. Click Save 6. Test the HTTPS connection from anoth er computer on the Internet Firewall Software Configuration If you are using a software firewall (i .e. Norton Internet Secu ...
-
Allnet ALL6600 iSCSI - page 72
72 2. Unscrew the damaged hard disk and remove it from the tray. 3. Slide a new hard disk into the tray and fasten the screws. 4. Insert the hard disk tray back into the ALL6600 iSCS I until it snaps into place. You can also lo ck it with a ke y if desired. 5. The LED blinks green when the HDD is accessed. If the Error LED flashes red, it signals a ...
-
Allnet ALL6600 iSCSI - page 73
73 Chapter 8: T roubleshooting Forgot My Password If you forget your pass word, you can re set the unit to use the default password. To do this, press the reset bu tton on the fro nt panel after system i s booted, and ALL6600 iSCSI will be reset. LAN IP address will become 192.168.1.100 and admin password will be admin . Forgot My Network IP Addres ...
-
Allnet ALL6600 iSCSI - page 74
74 Restoring Factory Defaults From the System menu, choose the Factory Default item and the R ese t to Factory De fault screen appears. Press A pply to reset the ALL6600 iSCSI to factory default setti ngs. Problems with Time and Date Settings The administrator is able to select an NTP Server to keep the ALL6600 iSCSI’s time synchronized. However, ...
-
Allnet ALL6600 iSCSI - page 75
75 Appendix A: Product S pecifications Hardware Specifications Product Model ALL6600 iSCSI Core Processors / Memory Processor Ultra Low Voltage Intel® 1.5GHz Celeron® M Memory 512MB DDR Network Interfaces WAN Gigabit RJ-45 connector LAN Gigabit RJ-45 connector Storage HDD Bays 5 x 3.5” SATA II HDD, hot-swappa ble HDD Support SATA II HDDs up to ...
-
Allnet ALL6600 iSCSI - page 76
76 RAID RAID 0, 1, 5, 6, 10, and JBOD Supports multiple RAID modes – users can create multiple RAID volu mes with different RAID levels in one system Auto rebuild Hot swappable Hot spare Disk roaming RAID level migration RAID expansion iSCSI Target Supports Microsoft iSCSI Initiator Folder Management Share folder level perm ission File level perm ...
-
Allnet ALL6600 iSCSI - page 77
77 Appendix B: Customer Support If your ALL6600 iSCSI is not working pr operly, we encourage you to check out Chapter 8: Troublesh ooting , located in this manual. You can also try to ensure that you are using the latest firmware ve rsion for your ALL6600 iSCSI. ALLNET is committed to providing free firmware upgr ades to our customers. Our newest f ...
-
Allnet ALL6600 iSCSI - page 78
78 Appendix C: RAID Basics Overview A Redundant Array of Independent Disks (RAID) is a n array of several hard di sks that provide data security and high perf ormance. A RAI D system accesses several hard disks simultaneously, which improves I/O performance over a single h ard disk. Data securi ty is enhanced by a RA ID, since data loss due to a ha ...
-
Allnet ALL6600 iSCSI - page 79
79 This is excellent for complet e data security. RAID 5 RAID 5 offers data secu rity and good perf ormance. It is best s uited for networks that perform many small I/O transact ions at the same time, as well as applications that require data secu rity such as office auto mation and online customer service. Use it also for applicat ions with h igh ...
-
Allnet ALL6600 iSCSI - page 80
80 RAID Level Percentage Used RAID 0 100% RAID 1 20% RAID 5 80% RAID 6 60% RAID 10 40% JBOD 100% NOTE RAID 10 allows onl y 4 disks and one as spare disk. ...
-
Allnet ALL6600 iSCSI - page 81
81 Appendix D: Active Directory Basics Overview With Windows 2000, Microsoft intro duced Ac tive Directory (ADS), which is a large database/information store. Prior to Active Directory the Wi ndows OS could not store additional information in its domain database. Active Directory also solved the problem of locating resources; wh ich previously reli ...
-
Allnet ALL6600 iSCSI - page 82
82 Appendix E: UPS Comp atibility List Brand Series Model Notes Ablerex MS-RT ActivePower 1400VA AEC MiniGuard UPS 700 M2501 cable Back-UPS Pro Matrix-UPS Smart-UPS Back-UPS 940-0095A/C cables, 940-0020B/C cables, 940-0023A cable Back-UPS Office 940-0119A cable Masterswitch Not a UPS - 940- 0020 cable APC Back-UPS RS 500 custom non- USB cable Regul ...
-
Allnet ALL6600 iSCSI - page 83
83 Brand Series Model Notes PowerRite MAX Fiskars PowerServer 10, 30 All models with alarm interface MP110/210 MS-T MS Gamatronic µPS3/1 Gemini UPS625/UPS1000 R3000 XR HP R5500 XR INELT Monolith 1000LT Infosec iPEL 350, 500, 750, 1000 Ippon (various) Liebert UPStation GXT2 contact-closure cable Masterguard (various) HF Line 1..4 boards, /2 5..8 bo ...
-
Allnet ALL6600 iSCSI - page 84
84 Brand Series Model Notes TrustTrust 425/625 BNT-1000AP Advice Partner/King Pr750 Powercom BNT-2000AP PowerGuard PG-600 PowerKinetics 9001 PowerTech Comp1000 DTR cable power Power Walker Line-Interactive VI1000 Powerware 3110, 3115, 5119, 5125, 5119 RM, PW5115 PW5125PW9120, PW9125, 9120, 9150, 9305 Powerwell PM525A/-625A/-800A/-1000A/ - 1250A RPF ...
-
Allnet ALL6600 iSCSI - page 85
85 Appendix F: Licensing Information Overview This product included copyrighted third- party software licensed under the terms of GNU General Public License. Please see THE GNU General Public License for extra terms and conditions of this license. Source Code Availability ALLNET GmbH. has exposed the full source code of the GPL licensed software. F ...
-
Allnet ALL6600 iSCSI - page 86
86 CGIC License Terms Basic License CGIC, copyright 1996, 1997, 1998, 1999, 200 0, 2001, 2002, 2003, 2004 by Thomas Boutell and Boutell.Com, Inc. Permission is grant ed to use CGIC in any application, commercial or noncommercial, at no cost. HOW EVER, th is copyright paragraph must appear on a "credits" page accessible in t he public onli ...
-
Allnet ALL6600 iSCSI - page 87
87 Also, for each author's protection and our s, we want to make certain that everyone understands that there is no warran ty for this free software . If the software is modified by someone else an d passed on, we want its recipients to know that what th ey have is not the orig in al, so that any problems in troduced by others will not reflect ...
-
Allnet ALL6600 iSCSI - page 88
88 c) If the modified program normally re ads commands interactively when run, you must cause i t, when started runni ng for such interacti ve use in the most ordinary way, to p rint or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that user ...
-
Allnet ALL6600 iSCSI - page 89
89 operating system on which the executable runs, unle ss that compo nent itself accompanies the executable. If distribution of executable or object co de is made by offering access to copy from a designated place, the n offering equivalent access to copy the source code from the same place counts as di stribution of the source code, e ven though t ...
-
Allnet ALL6600 iSCSI - page 90
90 This section is inten ded to make thoroughly clear w hat is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restri cted in certain countries either by patents or by copyrighted in terfaces, the original copyright holder who places the Program under this License m ay add an explicit ge ...
-
Allnet ALL6600 iSCSI - page 91
91 Germering, 7.12.07 EC – Declaration of c onformity for ALL6600 iSCSI This equipment conforms with th e requirements of the Coun cil Directive 89/336/EEC on the a pproximation of the laws of the member states relating to Radio an d Telecommunication Terminal Equipment and the mutual recogn ition of their conf ormity. The safety advice in the do ...
У вас вопрос, касающийся Allnet ALL6600 iSCSI?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Allnet ALL6600 iSCSI, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Allnet ALL6600 iSCSI со всей вероятностью он захочет поделиться методом ее решения.