-
JVC KV-C10 - page 1
ENGLISH 3351396B01-0 [J] ESP AÑOL FRANÇAIS MOBILE TV TUNER SYSTEM KV -C10 For customer Use: Enter below the Model No . and Serial No . which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. INSTR UCTIONS MANU AL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS For installation and connect ...
-
JVC KV-C10 - page 2
2 ENGLISH Safety points (Be sure to follow these points) CAUTIONS • DO NOT USE THE TV TUNER SYSTEM WHEN THERE IS A PROBLEM OR MALFUNCTION. IF THE TV TUNER SYSTEM IS USED IN AN ABNORMAL CONDITION SUCH AS WHEN THE TV TUNER SYSTEM IS EMITTING SMOKE OR AN UNUSUAL SMELL, IT MA Y CAUSE A FIRE OR SOME OTHER PROBLEM. * IMMEDIA TEL Y ST OP USING THE TUNER ...
-
JVC KV-C10 - page 3
3 ENGLISH Cautions for the liquid crystal panel (sold separately) • There are red spots, b lue spots and green spots on the panel surf ace. This is a characteristic of liquid cr ystal panels and is not a problem. Spots The liquid cr ystal panel is b uilt with v ery high precision technology and has at least 99.99% eff ective image pix els. Be aw ...
-
JVC KV-C10 - page 4
4 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS CONTROLS AND FEA TURES ......................................... 5 TV tuner unit ........................................................ ...
-
JVC KV-C10 - page 5
5 ENGLISH CONTROLS AND FEA TURES TV tuner unit Back F ront 1 3 2 4 ANTENNA INPUT 1234 INPUT 2 VIDEO L AUDIO R VIDEO CONT INPUT 1 VIDEO L AUDIO R See pages in the parentheses f or details. Front 1 ANTENNA INPUT jacks (f or connecting the diversity antenna) 2 INPUT 2 jacks • VIDEO • AUDIO L • A UDIO R 3 VIDEO CONT (Control) jack 4 INPUT 1 jacks ...
-
JVC KV-C10 - page 6
6 ENGLISH F ront Bac k To p 5 4 6 9 8 p 7 DOWN UP MODE POWER AUTO/MANU 1 2 3 Color monitor (KV -M700, sold separately) See pages in the parentheses f or details. Front 1 ST ANDBY lamp 2 Remote sensor (8) 3 Screen (Liquid crystal panel) Back 4 System connection cab le 5 Monitor stand guide slot • When you use the monitor stand to install JVC mobil ...
-
JVC KV-C10 - page 7
7 ENGLISH Remote controller (supplied with KV -M700) 1 2 4 5 7 8 3 6 9 y t e p w q r CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MODE SKIP A.MEMO CALL VOCAL R F MONI VCR RM-RK37 RM-RK37 VCR section VCR ; o u i a VCR section t RF (Radio frequency) button (15) y CALL button (14) VCR section The buttons in this section ar e used for operating JVC mobile ...
-
JVC KV-C10 - page 8
8 ENGLISH Installing the batteries When the controllable range or eff ectiveness of the remote controller decreases, replace the batteries. 1. Remove the back cover . While pushing on the bac k cover , slide it in the direction of the arrow . 2. Install the batteries. Place the two batteries R03(UM-4)/AAA(24F) supplied into the remote controller as ...
-
JVC KV-C10 - page 9
9 ENGLISH CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MONI MODE BASIC OPERA TIONS Preparation Before operating the system, make sure that all external components are correctly connected and installed. F or connecting the external components, ref er to the instructions and the installations supplied with the external components. W atching television 1 ...
-
JVC KV-C10 - page 10
10 ENGLISH 3 Select TV as the input source. Press the MODE button on the monitor or the remote controller repeatedly to select TV . 4 Select the channel y ou want to watch. Press the UP or DO WN button on the monitor or the 5 CH or ∞ CH on the remote controller to change the channels. If the channel selection is set to “AUTO” (See page 12.) Y ...
-
JVC KV-C10 - page 11
11 ENGLISH Storing channels in memory (A uto memory) The auto memory function picks up the TV broadcast signals in the area where you are and stores them automatically in memory . 1 Select TV as the input source. Press the MODE button on the monitor or the remote controller repeatedly to select TV . 2 Star t scanning TV broadcast signals . Press an ...
-
JVC KV-C10 - page 12
12 ENGLISH Setting the channel selection Y ou can set the channel selection method either to select only the receivab le channels in memor y or to select all the channels . Remember that if you w ant to select only the receivab le channels, y ou must store the channels first. T o store them, see page 11. CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MO ...
-
JVC KV-C10 - page 13
13 ENGLISH W atching playback of external component Y ou can connect up to 2 external video components to the TV tuner unit. T o watch the pla ybac k, first f ollow steps 1 and 2 on page 9, then perf or m the follo wing steps . 1 Select the input source . Press the MODE button on the monitor or the remote controller to select the input source you w ...
-
JVC KV-C10 - page 14
14 ENGLISH T o check the current input source Press the CALL button on the remote controller . The current input source name appears on the screen f or 3 seconds. T o turn off the power Press the POWER b utton on the monitor or the (power) b utton on the remote controller . • T urning off the engine will also tur n off the TV tuner system. Notes: ...
-
JVC KV-C10 - page 15
15 ENGLISH OTHER FUNCTIONS Setting the RF input This system provides RF input selector . When you use JVC FM modulator KS-IF200, y ou can listen to the sounds from the system through the receiv er equipped with no line input. F or connecting and setting KS-IF200, ref er to the instr uctions of KS-IF200. Press the RF button on the remote controller ...
-
JVC KV-C10 - page 16
16 ENGLISH ADJUSTMENTS Adjusting the color Y ou can adjust the color of the monitor system of KV -M700. This function can be operated only by using the remote controller supplied with KV -M700. CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MODE SKIP A.MEMO CALL VOCAL R F MONI VCR RM-RK37 RM-RK37 1 Press the COLOR button. The color level appears on the ...
-
JVC KV-C10 - page 17
17 ENGLISH Adjusting the brightness Y ou can adjust the brightness of the monitor system of KV -M700. This function can be operated only by using the remote controller supplied with KV -M700. 1 Press the BRIGHT button. The brightness level appears on the screen. 2 Press the 3 (up) or 2 (down) button to adjust the brightness. Y ou can adjust the br ...
-
JVC KV-C10 - page 18
18 ENGLISH Adjusting the contrast Y ou can adjust the contrast of the monitor system of KV -M700. This function can be operated only by using the remote controller supplied with KV -M700. 1 Press the CONTRA button. The contrast level appears on the screen. 2 Press the 3 (up) or 2 (down) button to adjust the contrast. Y ou can adjust the contrast le ...
-
JVC KV-C10 - page 19
19 ENGLISH Adjusting the headphone volume Y ou can connect two pairs of headphones. When adjusting the headphone v olume, the adjustment applies to both connected headphones at the same time. • Y ou cannot adjust the headphone volume separately f or the HEADPHONE 1 and 2 jacks . This function can be operated only by using the remote controller su ...
-
JVC KV-C10 - page 20
20 ENGLISH MAINTENANCE T o prevent damage to the system exterior • Do not apply pesticides, benzine , thinner or other volatile substances to the unit. The cabinet surface primarily consists of plastic materials. • Do not wipe with benzine, thinner or similar substances because this will result in discoloration or removal of the paint. • When ...
-
JVC KV-C10 - page 21
21 ENGLISH Remedies See page 3. Engage the parking break. Check the connection and correct it. Select the correct input mode. Install new batteries. Do not expose the remote sensor to strong light. P erform the auto memor y function again. Symptoms • Colored spots (red, blue and green) appear on the screen. • Sound can be heard but no picture a ...
-
JVC KV-C10 - page 22
22 ENGLISH In the f ollowing environments , the image quality may be impaired. Mov ement Doubling and tripling of images (ghosts) Image quality gradually worsens and color instability (displa yed and then disappear) Spots appear on the screen Color patterns appear on the screen; colors are lost Interf erence occurs Normal sound Normal sound Interfe ...
-
JVC KV-C10 - page 23
23 ENGLISH SPECIFICA TIONS TV TUNER UNIT Input Antenna: Mini-jack × 4 Video: RCA pin × 2 circuits 1 V(p-p), 75 Ω Audio: RCA pin × 2 circuits 0.5 V(rms) V ocal: Mono mini-jack × 1 Video Control: Mono mini-jack × 1 Output Displa y: 8-pin DIN connector Video: RCA pin × 1 circuit 1 V(p-p), 75 Ω Audio: RCA pin × 1 circuit 0.5 V(rms) Headphone ...
-
JVC KV-C10 - page 24
1100MNMMD WT AI EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED COVER.KV-C10[J] 00.11.28, 4:29 PM 2 ...
У вас вопрос, касающийся JVC KV-C10?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с JVC KV-C10, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с JVC KV-C10 со всей вероятностью он захочет поделиться методом ее решения.