-
Niles Audio OS-10 - page 1
MODEL OS - 1 0 MODEL OS - 1 0 Indoor/ Ou t door Loudspeaker . B LENDING H IGH F IDELITY AND A R CHITE CTURE ® INST ALLA TION & OPERA TION GUIDE ® ...
-
Niles Audio OS-10 - page 2
CO N G RA TU LA TI ONS Thank you for choosing the OS - 1 0 Indoor/Outdoor Loudspeaker from Niles. With proper installation and operation, you'll enjoy years of trouble-free use. Niles manufactures the industry's most complete line of custom installation components and accessories for audio/video systems. For a free full line catalog write ...
-
Niles Audio OS-10 - page 3
I NTR O DUCTIO N The OS - 1 0 marries unparalleled listening satisfaction with the freedom to listen to music anywhere! You can use them indoors and outdoors (even on a boat). The extraordinary sonic performance of the OS - 1 0 was achieved by harmoniz- ing unique and proprietary technology with the most advanced manufacturing methods and materials ...
-
Niles Audio OS-10 - page 4
FEA TURES & BENEFITS Precision Crossover An electronic dividing network inside the cabinet precisely distributes the music to the woofer and the tweeter. The two-way design of the OS - 1 0’ s crossover provides excellent stereo imaging and low distortion. ElastoDynamic ™ Hybrid Dome Tweeter In the past, every weather-resistant speaker has d ...
-
Niles Audio OS-10 - page 5
Rigid, Acoustically Inert Enclosure The cabinet of the OS - 1 0 is composed of mineral filled polypropylene. This material is extremely non-resonant. All you hear is the music. Low Diffraction Grill and Front Baffle The grill of the OS - 1 0 has hundreds of precisely sized perforations, creating an acoustically transparent grill. The front baffle i ...
-
Niles Audio OS-10 - page 6
Premium Gold-Plated Five-Way Binding Posts Gold plating gives you a corrosion-free high quality speaker wire connection. The connectors' five-way design allows you to use any of the most popular wire terminating methods. Easy Finger-Sized Access The binding posts are mounted upside down in a molded recess on the back of the OS - 1 0 . This pre ...
-
Niles Audio OS-10 - page 7
P ARTS GUIDE a. Bracket b. Nail Hole c. Wire Hole d. Screw Hole e. Rubber Insert f. Bracket Knob g. Grill h. Cabinet i. Binding Posts j. Threaded Inserts a c e b b f i j d d h h g f P ART S GUIDE 6 Figure 1 OS- 1 0 Parts Guide ...
-
Niles Audio OS-10 - page 8
IN ST ALL A TION C ONSID ER A TI O N S Tools and Materials Required • A wire stripper • A pencil • A level (optional) • Three screws or bolts suitable for the mounting surface • The proper screwdriver for your mounting hardware • A drill bit of the right size and type • An electric drill Wiring The OS - 1 0 connects to your receiver o ...
-
Niles Audio OS-10 - page 9
Incorporating a Volume Control It ’ s possible to control the volume of the sound at the speaker location. Plan to wire the system so that each pair of speakers has it ’ s own volume control. Niles makes a wide range of indoor and outdoor volume controls. Consult your local Niles dealer for more information. Volume controls are connected in lin ...
-
Niles Audio OS-10 - page 10
Placing the OS - 1 0 for the Best Sound Quality The OS - 1 0 ’ s dispersion patter n is very broad. The speaker is very sensitive and will handle a lot of amplifier power. This allows good sound quality over an extremely large listening area. However, if a single pair is positioned to provide coverage of a very large room or patio, you will have ...
-
Niles Audio OS-10 - page 11
Make sure you are not blocking or reflecting the sound off of furniture or other objects. You should have a direct line of sight with the front of the speaker. T o determine the best position, measure the distance between the ideal listening position and the wall you plan to mount the speakers on. Try to place the speak- ers so that they are at lea ...
-
Niles Audio OS-10 - page 12
1. If the speaker is never going to be exposed to sudden accidental impacts, wind, waves or earthquakes you can simply hang it on a nail using the nail hole(s) of the bracket (See Figure 7) . 2. The safest and most secure way to mount the speaker is by screwing it to the mounting surface using your own hardware (suitable for the surface you are mou ...
-
Niles Audio OS-10 - page 13
P AIN TIN G THE OS- 1 0 The enclosure, the brackets, and the grills of the OS- 1 0 can all be painted to match the surroundings. Because we want you to preserve the acoustic quali- ties of the grill, please paint the grill according to the grill painting instructions. Make sure you pick a paint that is appropriate for the mounting location. There a ...
-
Niles Audio OS-10 - page 14
2. Wipe off the other sides of the cabinet, the bracket, bracket knobs, and grill with a damp cloth. Do not touch or rub the speakers on the front baffle. Make sure everything is dry before masking. 3. Mask off the binding posts and the brass threaded inserts on the back panel with masking tape. 4. Mask off the threaded inserts on the top and botto ...
-
Niles Audio OS-10 - page 15
If you are using an applicator or brush and a can of paint, thin the paint first. Thick paint will tend to clog the grill holes. Replacing the Grill Carefully fit the grill into its recess so that it is barely in place. Starting with one corner, go around the speaker, pushing the grill in a little bit each time. You should be gentle, the aluminum g ...
-
Niles Audio OS-10 - page 16
INST ALLA TION Mounting the Bracket 1. Remove the bracket knobs and the bracket from the speaker. 2. Hold the bracket up to the mounting surface. The speaker can be mounted either horizontally or vertically. Hold the bracket so that the speaker wire fits through the large, circular wire hole in the bracket. Align the bracket to be square with the s ...
-
Niles Audio OS-10 - page 17
Connecting the Speaker 1. Separate the two conductors of the speaker wire so that at least two inches of each conductor are free. 2. Strip one half inch of insulation from the end of each conductor of the speaker wire. 3. If you have any connectors (gold pins or bananas) which you prefer to use, affix them to the stripped wire ends now. Only gold p ...
-
Niles Audio OS-10 - page 18
3. Stand so you are the same distance from each speaker and listen to the rich- ness of the bass and the loudness of the sound. 4. Turn off the amplifier and reverse the connections on one speaker only. 5. Repeat the listening test with the same setting of the volume control. When the sound has a richer bass and is slightly louder the speakers are ...
-
Niles Audio OS-10 - page 19
OP ERA TION Listening at Higher Volumes Outdoors there are no walls to reflect and contain the sound. It requires more power to achieve a reasonable volume of sound outside than it does when you are indoors. You also frequently find yourself very far from the speaker. It is possible to turn the volume so high that the amplifier runs out of power. T ...
-
Niles Audio OS-10 - page 20
S PE C IF IC A T IONS Recommended Amplifier Power Five to one hundred watts per channel Nominal Impedance 8 Ohms Frequency Response 65 Hz to 21 kHz, plus or minus 3 dB (on axis) Sensitivity 89 decibels for 1 .83 volts of Pink Noise, measured at 1 meter on axis Wiring Requirements Sixteen to eighteen gauge 2-conductor (unshielded or shielded) wire f ...
-
Niles Audio OS-10 - page 21
PLEASE FILL OUT THE W ARRANTY REGISTRA TION CARD ON THE REVERSE SIDE, DET ACH, AND MAIL T O: Niles Audio Corporation W arranty Registration Dept. P .O. Box 1 608 1 8 Miami, Florida 33 1 1 6- 08 1 8 DETACH HERE ...
-
Niles Audio OS-10 - page 22
DETACH HERE AND RETURN TO: Niles Audio Corporation Warranty Registration Dept. P .O. Box 160818 Miami, Florida 33 1 16-0818 Model Purchased __________________ ____________ _____ ________________ _______ _________________ Serial Number _____________ _____________ _______ _________________________ _________________ Date Purchased (month/day/year) ___ ...
-
Niles Audio OS-10 - page 23
LIMITED W ARRANTY Niles Audio Corporation ("NILES") warrants its outdoor loudspeaker products to the original purchaser to be free of manufacturing defects in material and workmanship for a period of two years from date of purchase. This Warranty is subject to the following additional conditions and limitations. The Warranty is void and i ...
-
Niles Audio OS-10 - page 24
Niles Audio Corporation 1 233 1 S. W . 1 30 Street Miami, Florida 33 1 86 T el: (305) 238-43 73 Fax: (305) 238-0 1 85 © 1 999 Niles Audio Corporation. DS00122A Printed in Taiwan ...
У вас вопрос, касающийся Niles Audio OS-10?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Niles Audio OS-10, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Niles Audio OS-10 со всей вероятностью он захочет поделиться методом ее решения.