-
Marantz SR6200 - page 1
Model SR6200 User Guide AV Surround Receiver R ...
-
Marantz SR6200 - page 2
vii CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “ danger ...
-
Marantz SR6200 - page 3
i IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1 . Read Instructions - All the safety and operating instructions should be read before the ...
-
Marantz SR6200 - page 4
ii 19. Servicing-Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service-Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the follow ...
-
Marantz SR6200 - page 5
iii AV SURROUND RECEIVER SR6200 UP SURROUND VOLUME DOWN MEMORY TUNING/PRESET MODE F/P CLEAR NIGHT ATT DISPLAY OFF SLEEP S-DIRECT DIMMER MUTE A/D 7CH INPUT POWER ON/OFF PHONES STANDBY AUX INPUT MUTE S-VIDEO VIDEO L AUDIO R A SLEEP MUTE ANALOG DIGITAL MLP PCM RF AUTO LOCK CIRCLE SURROUND EX MPEG DIRECT MEMORY PRESET SW LFE SR SC SL RT TA PTY AUTO TUN ...
-
Marantz SR6200 - page 6
iv (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. L R SPEAKER SYSTEMS CENTER SURR.CENTER SURROUND FRONT OUT VCR1 OUT VCR2 DSS / TOR MONI S - VIDEO VIDEO OUT OUT OUT VCR2 DSS / OUT VCR1 MONITOR VCR2 DSS / TV DVD VCR1 IN TV VCR1 DVD VCR2 DSS / IN IN TV DVD VCR1 VCR2 DSS / OUT TAPE TAPE / MD CDR CD R L IN VCR2 DSS / VCR1 ...
-
Marantz SR6200 - page 7
v (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. L R SPEAKER SYSTEMS CENTER SURR.CENTER SURROUND FRONT OUT VCR1 OUT VCR2 DSS / TOR MONI S - VIDEO VIDEO OUT OUT OUT VCR2 DSS / OUT VCR1 MONITOR VCR2 DSS / TV DVD VCR1 IN TV VCR1 DVD VCR2 DSS / IN IN TV DVD VCR1 VCR2 DSS / OUT TAPE TAPE / MD CDR CD R L IN VCR2 DSS / VCR1 ...
-
Marantz SR6200 - page 8
1 ENGLISH TABLE OF CONTENTS INTRODUCTION .............................................................................................................................................................. 2 DESCRIPTION ........................................................................................................................................ ...
-
Marantz SR6200 - page 9
2 ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR6200 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR6200. As there are a number of connection and co ...
-
Marantz SR6200 - page 10
3 ENGLISH FRONT PANEL FEATURES (SEE PAGE iii.) q POWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights. When this unit is in the standby mode, pressing one of the FUNCTION SELECTOR buttons also allows to ...
-
Marantz SR6200 - page 11
4 ENGLISH REAR PANEL CONNECTIONS (SEE PAGE iii.) All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components. a FM antenna terminal (75 ohms) Connect an external FM antenna with a coaxial cable, or a cable network FM source. AM an ...
-
Marantz SR6200 - page 12
5 ENGLISH - IN OUTPUT INPUT 5-13VDC + INVERT OUT VIDEO/ EXT.CONT.IN 8 OHMS REMOTE CONT. SPEAKER SYSTEM (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. VID O U I N IN TV DVD VCR1 VCR2 DSS / OUT TAPE TAPE / MD CDR CD R L IN VCR2 DSS / VCR1 OUT R L IN / OUT DIGITAL DIG.OUT OPT DIG - 1 IN DIG - 2 IN DIG.OUT COAX DIG - 3 IN ...
-
Marantz SR6200 - page 13
6 ENGLISH REMOTE CONTROL OPERATION • The remote control unit (RC6200SR) provided with the SR6200 is a “ learning ” -type, programmable unit capable of controlling almost any component in your system, as well as the Marantz D-BUS components (RC-5). The components to be controlled can be selected with one slide switch x and nine buttons ¤6 , e ...
-
Marantz SR6200 - page 14
7 ENGLISH n P.SCAN (preset scan) This button is used to start preset scan when SR6200 is selected TUNER mode. m MEMO button Memory enable button for various preset functions. , CONTROL buttons These buttons are used when operating the CD player, TAPE deck, etc. The functions of these buttons are dependent on the function button selected. For the co ...
-
Marantz SR6200 - page 15
8 ENGLISH ¤6 Input system selector buttons/ FUNCTION SELECTOR buttons (AUDIO/ VIDEO INPUT) Press one of these buttons once or twice to select a particular source component. For example, to set the amplifier or receiver to the DVD input, press the DVD button ¤6 twice within 2 seconds. Note: CDR/MD button is set CDR function at initial. To switch M ...
-
Marantz SR6200 - page 16
9 ENGLISH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 TOTAL SYSTEM KEY NO. SYSTEM NAME S1 AMP 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 MAIN POWER ON MAIN POWER OFF SOURCE POWER SLEEP AUTO ...
-
Marantz SR6200 - page 17
10 ENGLISH OPERATION OF REMOTE CONTROL UNIT 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR6200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control ma y not be possible . Remote- ...
-
Marantz SR6200 - page 18
11 ENGLISH SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY (OSD) MENU SYSTEM The SR6200 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller. The settings made with these buttons are also shown in the on-scre ...
-
Marantz SR6200 - page 19
12 ENGLISH OSD MAIN MENU 1. Press the AMP button ¤6 . 2. Press the MENU button ¤0 to display the “ MAIN MENU ” of the on- screen display menu. Choose a desired item in the contents with or button, and press the OK button to select. Display will change to menu for each item. SYSTEM SETUP SYSTEM SETUP 1/2 7CH-INPUT : The 7 channel input of the ...
-
Marantz SR6200 - page 20
13 ENGLISH SPEAKERS SETUP The home theater system you already have installed should function provided that there are left, center and right front speakers, left and right rear/surround speakers and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth ...
-
Marantz SR6200 - page 21
14 ENGLISH SURROUND MODE SOURCE DIRECT : Switch the source direct ON or OFF with or button. This bypasses the surround processing and crossover for the main speakers (front left and right will be full range and the subwoofer will be ON) Note: Surround mode cannot be changed in Source Direct mode. SURR-MODE : Select the surround mode with or button. ...
-
Marantz SR6200 - page 22
15 ENGLISH BASIC OPERATION LISTENING TO THE TUNER MANUAL TUNING 1. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button ¤6 on the remote. 2. Press the TUNER button t on the front panel or press the TUNER button ¤6 on the remote to select the desired frequency band if required. 3. Press the F/P b ...
-
Marantz SR6200 - page 23
16 ENGLISH STATION NAME PRESET (On PRESET display mode) The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation. 1. Press the MEMORY button !3 on ...
-
Marantz SR6200 - page 24
17 ENGLISH SETTING THE SLEEP TIMER Set the sleep timer while the power is turned on. 1. Turn the power ON and press the SLEEP button o / c . 2. Press the SLEEP button o / c the number of times to set the desired sleep time in minutes. Each press of the SLEEP button o / c or changes the display in the following order: The unit will shut off in the n ...
-
Marantz SR6200 - page 25
18 ENGLISH 2. FUCTION SELECT & SURROUND MODE When a function selector button or surround mode button is pressed VIDEO: Displays the current video source. When TV,DSS, DVD, VCR1 or AUX is selected with the function selector, both AUDIO and VIDEO shows the same name. AUDIO: Displays the current analog audio input source. DIGITAL: Displays the cur ...
-
Marantz SR6200 - page 26
19 ENGLISH SURROUND MODES The SR6200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. Surroud mode 1. AUTO 2. STER ...
-
Marantz SR6200 - page 27
20 ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector knob of the SR6200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows; Note: • Dolby D ...
-
Marantz SR6200 - page 28
21 ENGLISH CAUSE The power plug is not connected. Mute is on. The input cable is not connected correctly. The master volume control is turned all the way down. The function selector position is wrong. The headphones are connected to the headphone jack. Input cable connected incorrectly. Speaker cable connected incorrectly. The center speaker cable ...
-
Marantz SR6200 - page 29
22 ENGLISH GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: - disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to ...
-
Marantz SR6200 - page 30
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................................................................................................................................. 87.5 - 108.0 MHz Usable Sensitivity .............................................................................................................. ...
-
Marantz SR6200 - page 31
R is a registered trademark. Printed in China 01/05 MITi 321W851250 COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd., 24 Lionel Road, Mt. Waverley, VIC 3149, Australia AUSTRIA Huber & Prohaska GmbH Taborstra ß ...
У вас вопрос, касающийся Marantz SR6200?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Marantz SR6200, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Marantz SR6200 со всей вероятностью он захочет поделиться методом ее решения.