-
Magnadyne M1-CD - page 1
Operation and Installation Manual MUTE EQ MODE DISPLAY AS/PS PTY VOLUME PUSH SEL/ MENU DISC/DIR/CA T AUX IN TA W-BAND PUSH ENT/ BND/LOUD S-MOD/ SCH/ IPOD MENU TUNE/TRACK.CH ST 1 2 3 REPEAT 4 SHUFFLE 5 SCAN 6 DIM M1-CD AM / FM / WB Stereo Receiver with CD Player U.S. P A TENT NO.: D561753 ...
-
Magnadyne M1-CD - page 2
Please take the time to read all of the information in this manual. Familiarity with operation and installation procedures will help you obtain the best possible performance from your new AM/FM/WB Stereo Receiver with CD Player . WARNING! T o prevent fire or electrical shock hazard, do not expose this product to moisture, or remove cover or bottom ...
-
Magnadyne M1-CD - page 3
Button Locations and Functions 3 1. Equalizer Button (EQ): Press to choose between preset sound equalization settings. 2. Power On/Off and Display Dimmer: Press to turn the unit On or Off. Press and hold to dim the display . Press and hold again to restore display’ s illumination. 3. Display Button: Radio Mode: Press to display clock then press a ...
-
Magnadyne M1-CD - page 4
4 Button Locations and Functions (Continued) 13. T une/T rack and Loud Knob: Radio Mode: Manual T uning: Rotate the TUNE knob to the left or right and hold until “MANUAL” appears in the display , then release knob. Rotate the TUNE knob again left or right until the desired radio sta- tion appears in the display . Seek T uning: Rotate the TUNE k ...
-
Magnadyne M1-CD - page 5
5 MODE PWR/DIM VOL SEL S-MOD SCH IPOD MENU PTY W-BND DISP LOUD 3 2 1 DISC/CAT/DIR RPT AS/PS 4 SHF 5 SCN 6 INFRARED REMOTE CONTROLLER 15 12 2 11 16 6 1 2 3 4 5 8 7 MENU BND ENT 9 14 10 11 13 1. Power On/Off: Press to turn the unit On or Off. 2. T une/T rack and Loud Knob: Radio Mode: Manual T uning: Press and hold or button until “MANUAL” appear ...
-
Magnadyne M1-CD - page 6
6 General Operations Power On/Off: Press the button to turn the unit On. M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U D I S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D S -M O D / S C H / I P O D M EN U T UNE / T R A C K . C H S T 1 2 3 RE P E A T 4 S HUF F L E 5 S C A N 6 AUX FRT SD-CARD USB-DRIV AUX REAR DIS ...
-
Magnadyne M1-CD - page 7
7 Dimming the Display: Press and hold the button to dim the display . Press and hold it again to restore normal display brightness. M U TE EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U DI S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D S -M O D / S C H / I P O D M EN U T UNE / T RA C K . C H S T 1 2 3 RE P E A T 4 S HUF ...
-
Magnadyne M1-CD - page 8
8 AM/FM Radio Operations Power On/Off: Press the button to turn the unit 0n. Selecting the Play Source: Press the MODE button until AM1, AM2, F1, F2, F3 or radio station call letters appear in the dis- play . M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U D I S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D S -M O ...
-
Magnadyne M1-CD - page 9
9 AM/FM Radio Operation (Continued) Recalling Memorizing Radio Stations: 1. Press the TUNE knob to select either the AM1, AM2, F1, F2 or F3 radio band. 2. Press and release one of the six Radio Station Recall buttons to select the memorized radio station. M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U DI S C / DI R/ C A T A U X I N ...
-
Magnadyne M1-CD - page 10
10 Weather Band Radio Operations T uning in a Weather Band Radio Station: Press the W-BAND button and the tuner will scan for the strongest weather band station and start playing. Notes: 1. The remaining weather bands are stored in the Radio Station Recall Buttons. Rotate TUNE knob clockwise or counterclockwise to select from WB1 to WB7. Depending ...
-
Magnadyne M1-CD - page 11
11 Sound Controls Bass: 1. Select the Bass mode (BAS) by pressing the VOLUME knob. 2. Rotate the VOLUME knob to increase or decrease the bass level. 3. After 5 seconds control will revert back to vol- ume control. Volume: Increase the volume by rotating the VOLUME knob clockwise. Decrease the volume by rotating the VOLUME knob counterclockwise. Bas ...
-
Magnadyne M1-CD - page 12
12 Sound Controls (Continued) Fader: 1. Select the Fader mode (F AD) by pressing the VOLUME button. 2. T o adjust the amount of sound output to the Rear speakers, rotate the VOLUME knob clock- wise. T o adjust the amount of sound output to the Front speakers, rotate the VOLUME knob coun- terclockwise. F AD 00 = Sound to front and rear speakers equa ...
-
Magnadyne M1-CD - page 13
13 Disc Warnings Disc Formats Supported by this Player: CD 12cm disc MP3 12cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from the center toward the outside edge Handling and Cleaning: • Dirt, dust, scratches and warping disc will cause non operation. • Do not place stickers on disc or scratch disc. • D ...
-
Magnadyne M1-CD - page 14
14 M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U D I S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D T UNE / T RA C K . C H 1 2 3 RE P E A T 4 S HUF F L E 5 S C A N 6 Pausing a CD: Press the button to pause the disc. Press it again to resume play . Ejecting a CD: Press the button to eject a disc. M U T E EQ MODE ...
-
Magnadyne M1-CD - page 15
15 CD Operation (Continued) Repeating a CD T rack: Select the desired track to be repeated. Then press the REPEA T button once and “S-RPT” will appear in the display . This track will play repeat- edly . T o cancel this function, press the REPEA T button again and “S-RPT” will disappear from the display . The entire CD will now play continu ...
-
Magnadyne M1-CD - page 16
16 M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U DI S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D T UNE / T RA C K . C H 1 2 3 RE P E A T 4 S HUF F L E 5 S C A N 6 Pausing a MP3 Disc: Press the button to pause the disc. Press it again to resume play . MP3 Operation M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P ...
-
Magnadyne M1-CD - page 17
17 MP3 Operation (Continued) Ejecting a MP3 Disc: Press the button to eject a disc. M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U DI S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D T U NE / T RA C K . C H 1 2 3 RE P E A T 4 S HUF F L E 5 S C A N 6 Repeating a MP3 T rack: Select the desired track to be repeated. ...
-
Magnadyne M1-CD - page 18
18 CD Changer Operation (Option) Load CDs into Changer: Insert the loaded CD magazine into the external CD changer . Power On/Off: Press the button to turn the unit On. Selecting the Play Source: Press the MODE button until “CDC” appears in the display . M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U DI S C / DI R/ C A T A U X ...
-
Magnadyne M1-CD - page 19
19 Sirius Satellite Radio Setup (Option) Note: If your Sirius tuner is not activated, call 1-888-539-7474 to activate. The Sirius T uner ID Number (ESN) is required during the activation process. Follow the steps below to access the Sirius T uner ID Number (ESN): Accessing Y our Sirius T uner ID Number (ESN): 1. Press the MODE button until “SIRIU ...
-
Magnadyne M1-CD - page 20
20 Manual T uning: Rotate the TUNE knob until the desired channel appears in the display . M U TE EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U D I S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D S -M O D / S C H / I P O D M EN U T U NE / T R A C K . C H 1 2 3 RE P E A T 4 S HUF F L E 5 S C A N 6 Channel Number Lower Ch ...
-
Magnadyne M1-CD - page 21
21 Sirius Satellite Radio Operation (Option) (Continued) Category T uning: 1. Press the PTY button until “CA TEGORY” flashes in the display . M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U D I S C / DI R/ C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D S -M O D / S C H / I P O D M EN U T UN E / T R A C K . C H 1 2 3 RE P ...
-
Magnadyne M1-CD - page 22
22 Sirius Satellite Radio Operation (Option) (Continued) Memorizing a Preset Sirius Channel: 1. Press the TUNE knob to select either the SR 1, SR 2 or SR 3 Sirius band. Each band can memorize 6 channels for a total of 18 chan- nels. 2. T une-in the desired Sirius channel. 3. T o memorize the channel press and hold any- one of the six Sirius Channel ...
-
Magnadyne M1-CD - page 23
23 Sirius Satellite Radio Operation (Option) (Continued) Reinstating a Skipping Sirius Channel: 1. T une to a channel that is adjacent a Skipped Channel. (Example: If channel 003 is a "Skipped Channel", tune to channel 002). 2. Press the PTY button until “SKIP” appears in the display . 3. T une-in the skipped channel. (Example: Rotate ...
-
Magnadyne M1-CD - page 24
24 IPOD Operation General Operations: 1. Press the button to turn the unit On. 2. Connect an IPOD to the cable attached to the M1-CD. 3. The unit will automatically switch to the IPOD mode and start playing. Note: The IPOD controls will become inoperable and the M1-CD will now control the IPOD. M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S E ...
-
Magnadyne M1-CD - page 25
25 IPOD Operation (Continued) M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H SEL/ M EN U D I S C / DI R / C A T A U X I N TA W-BAND P U S H EN T/ B N D / LO U D T UNE / T RA C K . C H 1 2 3 RE P E A T 4 S HUF F L E 5 S C A N 6 3. Press the TUNE knob to select the SONGS menu. 4. Rotate the TUNE knob to select the desired song from the menu. The ...
-
Magnadyne M1-CD - page 26
26 IPOD Operation (Continued) Preview T racks: Press the SCAN button until “IPOD SCN” appears in the display . Each track on the IPOD will play for 10 seconds. T o cancel this function, press the SCAN button again and “IPOD SCN” will disappear from the display . M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H SEL/ M EN U DI S C / DI R/ C ...
-
Magnadyne M1-CD - page 27
27 USB Operation General Operations: 1. Press the button to turn the unit On. 2. Connect a MP3 player to the USB socket on the front panel. 3. The unit will automatically switch to the USB mode and start playing. Note: The controls on the MP3 player will become inoperable, and the M1-CD will now control the MP3 player . M U T E EQ MODE DISPLAY AS/P ...
-
Magnadyne M1-CD - page 28
28 SD Card Operation General Operations: 1. Press the button to turn the unit On. 2. Insert the SD Card label side up into the SD card slot on the front panel. 3. The unit will automatically switch to the SD CARD mode and start playing. M U T E EQ MODE DISPLAY AS/PS PTY V OLUM E P U S H S EL/ M EN U DI S C / DI R/ C A T A U X I N TA W-BAND P U S H ...
-
Magnadyne M1-CD - page 29
29 Setup Features (Continued) Display Priority: 1. Press and hold the VOLUME knob approxi- mately 5 seconds until “BEEP ON” appears in the display . Press the VOLUME knob repeated- ly until “PRI SRC” appears in the display . 2. Rotate the VOLUME knob to adjust the display priority: Clock priority (PRI CLK), No priority (PRI NO) or Source pr ...
-
Magnadyne M1-CD - page 30
30 S tep 1: The radio chassis is designed to be “Sleeve Mounted” through a opening in the dashboard panel. The required opening size is 182mm (7-3/16") x 84mm (3-5/16"). Cut or engage an opening in the dashboard to accommodate the mounting sleeve. Step 2: Insert the mounting sleeve into the opening in the dashboard. Bend the metal tab ...
-
Magnadyne M1-CD - page 31
31 _ + White/Black Wire White Wire Left Front Speaker _ + Gray/Black Wire Gray Wire Right Front Speaker _ + Green/Black Wire Green Wire _ + Violet/Black Wire Violet Wire Left Rear Speaker Right Rear Speaker Speaker Connections WARNING! Any wires left unconnected must be taped-off or capped-off to prevent shorting. DO NOT connect speaker ground wire ...
-
Magnadyne M1-CD - page 32
32 Auxiliary Connections Red Wire (+) to 12 Volt Ignition Black Wire Ground This unit for use only with a 12 Volt DC power source with a negative ground. 2-Channel Audio Output Amplifier (Optional) Y ellow Wire (+) to 12 Volt Constant 2-Channel Audio Output Amplifier (Optional) Front Line Out Brown Cable Rear Line Out Gray Cable Blue Wire Amplifier ...
-
Magnadyne M1-CD - page 33
33 Input Connections RCA Connectors TV (Optional) Audio Input (Rear) Y ellow Cable IPOD (Optional) Audio Output ME N U IPOD Cable (Optional) Sirius Antenna (Optional) Sirius Receiver (Optional) ...
-
Magnadyne M1-CD - page 34
34 Input Connections Automotive-T ype External Antenna (Optional) In-Wall Antenna (Optional Model: DP36AXT) Plug Either T ype of Antenna into the Female Antenna Receptacle CD Changer (Optional) Wired Remote Controller (Optional) Infrared Remote Eye (Optional) ...
-
Magnadyne M1-CD - page 35
35 The LCD display may fail to function normally due to the vehicle’ s batter y condition, and could require resetting the radio microprocessor if: • The vehicle has been “jump started” from a dead battery condition. • The vehicle battery becomes ver y low and is quick-charged. • The vehicle battery is removed and replaced. Should any o ...
-
Magnadyne M1-CD - page 36
© Copyright 2007 Magnadyne Corporation M1-CD-UM Rev . B 2-6-08 Warranty ONE (1) YEAR LIMITED W ARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair , replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized ...
У вас вопрос, касающийся Magnadyne M1-CD?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Magnadyne M1-CD, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Magnadyne M1-CD со всей вероятностью он захочет поделиться методом ее решения.