-
NEC LCD4000 - page 1
L CD4 000 TM ...
-
NEC LCD4000 - page 2
Impor t ant Information .......................................................................................................................... 1 Safety Precautions, Maint enance, & Recommended Use ................................................................. 2 Content s ................................................................... ...
-
NEC LCD4000 - page 3
1 Imp or t ant Inf ormat ion Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 950. FCC Information 1. Use the ...
-
NEC LCD4000 - page 4
2 Recommended Use CAUTION CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Rest your eyes periodically by focusing on an object at least 20 feet away . Blink often. • Position the monitor at ...
-
NEC LCD4000 - page 5
3 REMOTE CONTROLLER RU-M104 LCD4000 TM C ontent s * Install an attached stand at the time of unpacking when it uses with the stand. * Remember to save your original box and packing material to transport or ship the monitor . Your new LCD4000 ™ monitor box* should contain the following: • LCD monitor • Power Cord (3m) • Video Signal Cable ? ...
-
NEC LCD4000 - page 6
4 Y ou can attach mounting accessories to the LCD monitor in one of the following two ways: 1. In the upright position V entilation Requirements for enclosure mounting T o allow heat to disperse, leave space between surrounding objects as shown in the diagram to the right. At t aching LCD Opt ions 2. Lay the screen face down T o avoid damaging the ...
-
NEC LCD4000 - page 7
5 DOWN ( ) button Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. EXIT button Activates the OSM menu when the OSM menu is turned-off. Acts as EXIT button to move to previous menu with OSM menu. Remote control sensor and Power indicator Receives the sign ...
-
NEC LCD4000 - page 8
6 AUDIO IN 1,2,3 T o input audio signal from external equipment such as a computer , VCR or DVD player . AUDIO OUT T o output the audio signal from the AUDIO IN 3 jack. VIDEO VIDEO IN connector (BNC and RCA): T o input a composite video signal. BNC and RCA are not available at the same time. (Use only one input). VIDEO OUT connector (BNC): T o outp ...
-
NEC LCD4000 - page 9
7 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/ HD], [VIDEO]. AUDIO INPUT button Selects from input audio signal, [AUDIO1], [AUDIO2], [AUDIO3] SIZE button Selects picture size, [FULL], [NORMAL], [WIDE]. See page 18. PICTU ...
-
NEC LCD4000 - page 10
8 Point the top of the remote control toward the LCD monitor's re- mote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor's remote control sensor and at a hori- zontal and vertical angle of within 30 ° within a distance of about 3 m/10 ft. * Other than to instal ...
-
NEC LCD4000 - page 11
9 1. Determine the installation location CAUTION Installing your LCD display must be done by a qualified techni- cian. Contact your dealer for more information. CAUTION MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injur y if the LCD monitor falls. IMPORT ANT Lay the protectiv ...
-
NEC LCD4000 - page 12
10 C onne c tions Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Equipment with di g ital interface Personal computer LCD monitor (second monitor) DVD player Personal computer HD or laser disc player V ...
-
NEC LCD4000 - page 13
11 Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly . • T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • T o connect the RGB 3 DVD/ ...
-
NEC LCD4000 - page 14
12 Connecting your Macintosh ® computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers may not display images correctly . • T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). For olde ...
-
NEC LCD4000 - page 15
13 Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector DVI-D connector To DVI output To audio output LCD monitor Connecting to a Computer with a Digital Output ...
-
NEC LCD4000 - page 16
14 Connecting your VCR or laser disc player to your LCD monitor will enable you to display your VCR or laser disc player video. Refer to your VCR or laser disc player owner's manual for more information. RCA RCA BNC BNC T o VIDEO IN DIN 4 pin DIN 4 pin VCR or Laser disc player To VIDEO OUT To S-VIDEO OUT To audio right output To audio left out ...
-
NEC LCD4000 - page 17
15 Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player owner ’ s manual for more information. T o RGB3 DVD/HD IN BNC x 3 T o D VD Component video output T o audio right output BNC-to-RCA adapter To audio left output DVD player LCD monitor LCD monitor (second monitor) Connecting to a D ...
-
NEC LCD4000 - page 18
16 Y ou can connect your stereo amplifier to your LCD monitor . Refer to your amplifier owner's manual for more information. T o audio right output T o audio left output VCR or Laser disc player T o audio right input T o audio left input Amplifie External s p eaker External s p eaker LCD monitor Connecting to a Stereo Amplifier • T urn on th ...
-
NEC LCD4000 - page 19
17 B as ic Op er at ion –Power ON and OFF Modes 1. Pressing the power button. NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor . 2. Using the remote control NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor . 3. Pressing the Main Power Switc ...
-
NEC LCD4000 - page 20
18 The LCD monitor follows the VESA approved DPMS Power Man- agement function. The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period of time. T o view a video source: Use the input button to set [VIDEO]. Use the C ...
-
NEC LCD4000 - page 21
19 OSM (On- S cr e en Manager) Contr ols –Computer PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR CONTROL COLOR TEMPERATURE PICTURE RESET BRIGHTNESS SET SET SET Press UP or DOWN button to select sub-menu Press UP or DOWN button to select UP or DOWN button INPUT button Press UP or DOWN button to select Press INPUT button to decide Press I ...
-
NEC LCD4000 - page 22
20 OSM Contr ols –Computer continued H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN RESET H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN RESET H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN RESET H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN R ...
-
NEC LCD4000 - page 23
21 OSM Contr ols –Computer continued PIP SIZE PIP AUDIO PIP RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE LARGE MIDDLE SMALL REMOTE-PIP Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode. 'Large', 'Middle', 'Small' and 'REMOTE-PIP' are available. PIP SIZ ...
-
NEC LCD4000 - page 24
22 OSM C ontr ols –Computer continued OSM TIME OFF TIMER SCREEN SA VER F ACTOR Y PRESET OSM TIME In the OFF TIMER menu, you can preset the monitor to automatically power down. A time between 1 to 24 hours is available. In the OSM Time menu, you can select how long the OSM information appears, when pressing the Display key. Time from 3 to 30 secon ...
-
NEC LCD4000 - page 25
23 OSM C ontr o ls –DVD & HD BRIGHTNESS CONTRAST SHARPNESS COLOR BLACK LEVEL PICTURE RESET PICTURE Sub-Menu Main-Menu Adjusts the overall image and background screen brightness. Press + button to increase sharpness. Press - button to decrease sharpness. TREBLE AUDIO Sub-Menu Main-Menu COLOR BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL PICTURE RE ...
-
NEC LCD4000 - page 26
24 OSM C ontr ols –DVD & HD continued LANGUAGE OSM TIME OFF TIMER SCREEN SA VER CONFIGURA TION RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE LARGE MIDDLE SMALL Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode. 'Large', 'Middle', and ' ...
-
NEC LCD4000 - page 27
25 OSM C ontr o ls –A V Input BRIGHTNESS CONTRAST SHARPNESS TINT COLOR BLACK LEVEL NOISE REDUCTION PICTURE RESET PICTURE Sub-Menu Main-Menu Adjusts the overall image and background screen brightness. Press + button to increase brightness. Press - button to decrease brightness. TREBLE AUDIO Sub-Menu Main-Menu TINT BRIGHTNESS CONTRAST SHARPNESS COL ...
-
NEC LCD4000 - page 28
26 OSM Contr ols –AV Input continued PIP SIZE PIP AUDIO PIP RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE LARGE MIDDLE SMALL Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode. 'Large', 'Middle', and 'Small' are available. PIP SIZE PIP AUDIO PIP RESET PIP AUDIO MA ...
-
NEC LCD4000 - page 29
27 OSM Contr ols –AV Input continued COLOR SYSTEM CONFIGURA TION RESET CONFIGURATION RESET NO YES : SEL EXIT :PRE MENU :END Selecting the Configuration Reset allows you to reset all configuration settings. Select 'Yes' and press 'SET' button to decide to restore to factory preset. Selecting the Color System depends on your inp ...
-
NEC LCD4000 - page 30
28 Using the LCD w ith a Pers onal Computer (P C) This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC Note: If your PC (IBM or IBM compatible) is equipped only wit ...
-
NEC LCD4000 - page 31
29 3) Control sequence (1) The command from a personal computer to the LCD monitor will be sent in 400ms. (2) The LCD monitor will send a return command 400ms* after it has received an encode. If the command isn't received correctly , the LCD monitor will not send the retur n command. (3) The personal computer checks the command and confirms i ...
-
NEC LCD4000 - page 32
30 40” diagonal screen size adds a new option to information display visual offerings. 1280 x 768 resolution allows for crisp text and precise images. No permanent phosphor image burn-in contributes to optimal screen performance and longer monitor life. XtraView ® technology allows for wide-angle viewing. DDC/CI capabilities allow control comman ...
-
NEC LCD4000 - page 33
31 T r oub le sho ot ing No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or syst ...
-
NEC LCD4000 - page 34
32 R efer e nce s NEC-Mitsubishi Monitor Customer Ser vice & Suppor t Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Customer Service Policies & Processes: http://www.necmitsubishi.com/ css/ ServicePolicies/ServicePolicies.htm Online Tec ...
-
NEC LCD4000 - page 35
33 S p e c if ic at ions LCD Module External speaker output inpedance Frequency Pixel Clock Viewable Size Input Signal Power Supply Operational Environment Storage Environment Dimension Weight VESA compatible arm mounting interface Complied Regulatory and Guidelines Power Management Plug & Play Resolutions Supported Accessories Pixel Pitch Reso ...
-
NEC LCD4000 - page 36
34 Limite d W ar r ant y NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “ NMD-A ” ) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A ’ s sole option) any part of the enclosed unit which proves defective for a period ...
-
NEC LCD4000 - page 37
Declaration of the Manufacturer W e hereby certify that the color monitors LCD4000 is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: — EN 55022 — EN 61000-3-2 — EN 61000-3-3 — EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 4-13-23, Shibaura, Minato-Ku T okyo 108-0023, ...
-
NEC LCD4000 - page 38
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC-Mitsubishi Electronics Display of America and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufa ...
У вас вопрос, касающийся NEC LCD4000?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с NEC LCD4000, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с NEC LCD4000 со всей вероятностью он захочет поделиться методом ее решения.