-
POS-X XR510 - page 1
...
-
POS-X XR510 - page 2
3-Y ear Limited W arranty POS-X Inc. provides this three (3)-Y ear W arranty for this product. For terms and conditions please go to: WWW .POS-X.COM All specifications are subject to change without notice ...
-
POS-X XR510 - page 3
T ABLE OF CONTENTS 1. Parts Identifications 3 2. Setting up the printer 4 2.1 Unpacking 4 2.2 Connecting the cables 5 2.3 Loading the roll paper 9 2.4 Dip switch setting 1 1 3. Control panel and other functions 18 3.1 Control panel 18 3.2 Error Indicating 18 4. Self T est 19 5. Hexadecimal Dump 20 6. Specifications 21 6.1. General Specifications ...
-
POS-X XR510 - page 4
3 1. Parts Identifications ...
-
POS-X XR510 - page 5
4 2. Setting Up the Printer 2-1. Unpacking Y our printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. The Printer User's Manual Roll Paper Adaptor(Option) Interface Cable(optional) ...
-
POS-X XR510 - page 6
5 2-2. Connecting the Cables Y ou can connect up the cables required for printing to the printer . They all connect to the connector panel on the back of the printer , which is shown below : Before connecting any of the cables, make sure that both the printer and the computer are turned off. ...
-
POS-X XR510 - page 7
6 2-2-1. Interface Connector <D-SUB 25 Female Serial> <Centronics Parallel> <USB “B” T ype> <Ethernet> <USB COMBO> <Wi-fi> Serial Interface PIN SIGNAL I/O DESCRIPTION 2 TXD Output Printer transmit data line RS-232C level 3 RXD Input Printer receive data line RS-232C level 4, 20 DTR Output Printer handshake t ...
-
POS-X XR510 - page 8
7 Centronics Parallel Interface PIN SIGNAL I/O DESCRIPTION 1 STROBE- Input Synchronize signal Data received 2~9 DA T A0~7 Input/Output Data bit T ransmitted 0~7 10 ACK- Output Data receiving completed. 1 1 BUSY Output Impossible to print of data receiving. 12 PE Output Paper empty 13 SELECT Output Printer status for ON/OFF line 14 AUTO FEED- Input ...
-
POS-X XR510 - page 9
8 2-2-2. Cash Drawer Connector The printer can operate two cash drawers with a 6 pin RJ-1 1 modular connector . The driver is capable of supplying a maximum current of 1.0A/24VDC for 510ms or less when not printing. PIN SIGNAL DESCRIPTION 1 Signal GND - 2 Drawer kick-out drive signal 1 Output 3 Drawer open/close signal Input 4 +24V - 5 Drawer kick- ...
-
POS-X XR510 - page 10
9 2-3. Loading the Roll Paper Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly . (T urn off power switch) 1. Make sure that the printer is not receiving data; Otherwise, data may be lost. 2. Open the paper roll cove ...
-
POS-X XR510 - page 11
10 5. Be sure to note the correct direction that the paper comes off the roll. 6. Pull out a small amount of paper , as shown. Then, close the cover . 7. T ear off the paper as shown. ...
-
POS-X XR510 - page 12
1 1 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements. It has DIP switches that allow you to change communication setting, such as handshaking and parity check, as well as print density . Y our printer has two sets of ...
-
POS-X XR510 - page 13
12 2-4-2. Parallel Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW-1 SW -2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-3. USB COMBO Interface Specification DIP Switch Set 1 Function SW F ...
-
POS-X XR510 - page 14
13 2-4-4. USB Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW -2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF ------------------------------------------------- old USB -------------------------------------------------------- DI ...
-
POS-X XR510 - page 15
14 2-4-5. Wi-fi Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW -2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-6. Ethernet Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEF AUL T 2 Hexadecimal HEXDUMP NORMAL ...
-
POS-X XR510 - page 16
15 DIP Switch Set 2 Functions Cutter SW FUNCTION ON OFF Remarks 3 Cutter FULL CUT P ARTIAL CUT Only Epson mode Emulation FUNCTION SW-4 SW-5 Epson (TM-88) OFF OFF Paper low detect (*1) SW FUNCTION ON OFF 6 Paper Low Detect Do not Detect (*1) The detecting function of [Paper Low] is an option. Please set Dip Switch (2-6) [OFF] if you don't need ...
-
POS-X XR510 - page 17
16 ♣CAUTION: T urn off the printer while removing the DIP switch cover to prevent an electric short, which can damage the printer . 1. Make sure the printer is turned off. 2. Remove the screw from the DIP switch cover . Then, take off the DIP switch cover as shown in the illustration below . 3. Set the switches using a pointed tool, such as tweez ...
-
POS-X XR510 - page 18
17 ♣CAUTION: When the paper is jammed with cutter , the top cover might be stuck. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the papers from jamming. 1. Make sure the printer is turned off. 2. T ake out cutter cover as shown. 3. T urn screw with drivers to a direction u ...
-
POS-X XR510 - page 19
18 3. Control panel and other functions. 3-1. Control panel Y ou can control the basic paper feeding operations of the printer with the button on the control panel. The indicator lights help you to monitor the printer ’ s status. Control Panel Button The button can be disabled by the ESC c 5 command. Press the FEED button once to advance paper on ...
-
POS-X XR510 - page 20
19 4. Self T est The self-test lets you know if your printer is operating properly . It checks the control circuits, printer mechanisms, print quality , ROM version and DIP switch settings. This test is independent of any other equipment or software. Running the self test 1. Make sure the printer is turned off and the printer cover is closed proper ...
-
POS-X XR510 - page 21
20 5. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer . This can be useful in finding software problems. When you turn on the hex dump function, the printer prints all commands and other data in hexadecimal format along with a guide section to help you find specific commands. T o use the h ...
-
POS-X XR510 - page 22
21 6. Specifications Appendix A : Specifications 6-1. General Specifications (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (Approx 35.4LPS) (3) Dot density 180 DPI (Hor / V er) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180 DPI Max 72mm (512 dots) (5) Number of print columns. No. of columns Font “A” F ...
-
POS-X XR510 - page 23
22 (8) Overall dimension ...
-
POS-X XR510 - page 24
23 6-2. Auto Cutter Specifications (1) Cutting Frequency Max. 30 cuts per minute (2) Thickness of paper 0.065 ~ 0.1 mm (3) Cutter Life 1.0 million cuttings (if the paper thickness is between 65 and100µm) 6-3. Interface RS232C Serial Interface, Centronics Parallel Interface(IEEE1284), USB Interface USB COMBO Interface, Ethernet Interface(10Mbps), ...
-
POS-X XR510 - page 25
24 ♣Important! When connecting or disconnecting the power supply from the printer , be sure that the following cautions are observed. (1) Use a power supply (Limited Power Supply) of DC 24V±10% and more than 2.5A. (2) Be careful about installing the printer in an area where there is noise. (3) T ake the appropriate measure to protect against ele ...
-
POS-X XR510 - page 26
25 7. Command List No. Command Function REMARKS 1 HT Horizontal tab 2 LF Print and line feed 3 CR Print and carriage return 4 FF Print and return to standard mode(in page mode) 5 CAN Cancel print data in page mode 6 DLE EOT Real-time status transmission 7 DLE ENQ Real-time request to printer 8 DLE DC4 Generate pulse at real-time 9 ESC FF Print data ...
-
POS-X XR510 - page 27
26 No. Command Function REMARKS 41 ESC { Turn upside-down printing mode on/of f 42 FS p Print NV bit image 43 FS q Define NV bit image 44 GS ! Select character size 45 GS $ Set absolute vertical print position in page mode 46 GS * Define downloaded bit image 47 GS / Print downloaded bit image 48 GS B T urn white/black reverse printing mode on/off ...
-
POS-X XR510 - page 28
27 ...
-
POS-X XR510 - page 29
POS-X, lnc. 2130 Grant Steet Bellingham, W A 98225 360-738-8433 support@pos-x.com ...
У вас вопрос, касающийся POS-X XR510?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с POS-X XR510, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с POS-X XR510 со всей вероятностью он захочет поделиться методом ее решения.