-
Graco 24M499 - page 1
Instructions Diesel Exhaust Fluid (DEF) System 3A1189G EN For pumping diesel exhaust fluid. Not approved for use in European explosive atmosp here locations. For professional use only. 50 psi (0.3 MPa, 3.4 bar) Maximum Fluid Working Pressu re 50 psi (0.3 MPa, 3.4 bar) Maximum Air Input Pre ssure Model No. 24F531 Wall mounted with mete r Model No. 2 ...
-
Graco 24M499 - page 2
Warnings 2 3A1189G Warnings The following general warn ings are for the setup, use, ground ing, maintenance, and repair of this equipme nt. Addi- tional, more specific warnings may be found th ro ughout the body of this manual where applicable. Symbols appea r- ing in the body of the manual re fer to these general warnin gs. When these symbols appe ...
-
Graco 24M499 - page 3
Warnings 3A1189G 3 Pressure Relief Procedure Follow this Pressure Relief Procedure whenever you: • Are instructe d to relieve pressure. • Stop dispensin g. • Check, clean or service any system eq uipment. • Install or clean fluid nozzles. 1. Turn OFF air sup ply to pump ( F IG . 1). 2. Open the nozzle. 3. Be sure you have a container r eady ...
-
Graco 24M499 - page 4
Installation 4 3A1189G Installation Typical Installations Model 24F531 - Wall Mounted, with Meter Model 24F878 - Wall Mounted, no Meter Key AP u m p B Bleed-type master air valve (required for pump) C Air supply line D Pump air regulator E Fluid supply hose F Suction kit G Wall mounting bracket H Fluid nozzle JM e t e r K Nozzle bracket and bath L ...
-
Graco 24M499 - page 5
Installation 3A1189G 5 Model 24F947 - Drum Mo unted without Meter Model 24M499 - Drum Mounted with Meter Key AP u m p B Bleed-type master air valve (required for pump) C Air supply li ne D Pump air regulator E Fluid supply hose F Suction kit G Fluid n ozzle J Nozzle tray and bath K Drum bracket L Safety valve - set to 50 psi (3.4 bar, 0.34 MPa) M M ...
-
Graco 24M499 - page 6
Installation 6 3A1189G General Installation Information • The Typical Installation illustrations provided on pages 4 - 5 are only guide lines for installing system components. Contact your Graco distri butor for assistance in planning a system to suit your needs. • To ensure your system is compatible with fluids being pumped, always use genuin ...
-
Graco 24M499 - page 7
Installation 3A1189G 7 Pump For complete pump instruct ions refer to the pump instruction m anual includ ed with your system. • If necessary, change the orienta tion of the fluid inlet and outlet ports on th e pump. See pump instru ction manual for this proced ure. • Retorque bolts per specifications. Air Line Alpha letters included in th e fol ...
-
Graco 24M499 - page 8
Installation 8 3A1189G The suction line is designed to allow for full evacuation of the container so it will b end slightly when installed. 1. Connect suction tube (6c) to drum inser t (6b) to pump. 2. Insert suction lin e (6c) into drum. 3. Install drum coupler (6a) into drum insert (6b) 4. Connect hose (E) to pump fitting. Use a flat-blade screw ...
-
Graco 24M499 - page 9
Operation 3A1189G 9 Drum Mounting Bracket (2): Model 24F947 or 24M499 Drum moun ted DEF Sys tem Models 24 F947 or 2 4M499 include a M ounting Bracke t Kit containing the following parts - Scre ws (2a), Screws (2b), Washe rs (2d), Hex Nuts (2e), Mounting Pl ate (2f), Nozzle Bath Holde r (2g), Nozzle Holder Br acket (2h) an d screws (2j) . The Mount- ...
-
Graco 24M499 - page 10
Parts 10 3A1189G Parts Wall Mounted with Meter: Model 24F531 Wall Mounted without Meter: Model 24F878 Ref Part No. Description Qty 1 24G745 PUMP, diaphragm, 515, plastic, bsp 1 2 24F870 KIT, pump bracket, 3 in 1 (See Kits, page 12) 1 3 24F529 NOZZLE, w/swivel (model 24F878) 1 4 110147 REGULATOR, air, 1/4”npt & gauge (not shown ) 1 5 110223 VA ...
-
Graco 24M499 - page 11
Parts 3A1189G 11 Drum Mounted withou t Meter: Model 24F947 Drum Mounted with Meter: Model 24M499 Ref Part No. Description Qty 1 24G745 PUMP, diaphrag m, 515,plastic, bsp 1 2 24F679 KIT, pump bracket, drum moun t (See Kits, page 12) 1 3a 125078 NOZZLE, manual (model 24 F947) 1 3b 24F529 NOZZLE , w/swivel (mod el 24F499) 4 110147 REGULATOR, air,1/4? ...
-
Graco 24M499 - page 12
Technica l Data 12 3A1189G Bracket (2) Kits 2 - Bracket 24F870: Models 24F531 / 24F878 2 - Bracket 24F 679: Model 24F947 / 24M499 Technical Data 2a SCREW, cap, hex head (not shown) 4 2b SCREW, cap, hex head 4 2c WASHER (not sho wn) 4 2d WASHER, plain 14 2e NUT, h ex 7 2f PLATE, pump mount 1 2g HOLDER, nozzle bath 1 2h BRACKET, nozzle holder 1 2j SC ...
-
Graco 24M499 - page 13
Technical Data 3A1189G 13 Meter US Metric Flow range 0.5 to 15 gpm 1.9 to 57 lpm Maximum working pressure 50 psi 0.3 MPa, 3.4 bar Minimum workin g pressure 5 psi 34 MPa, 0.3 bar Weight 1.8 lb 0.82 kg Unit of meas urement ( Display shows quantity in 0.01 increments up to 999.99 gallons, quarts, pints or liters. To talizes in gallons or liters up to ...
-
Graco 24M499 - page 14
All written and visual data con tained in th is document reflects the latest product info rmation available at the time of publica tion. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM3A1189 For patent information, see www.graco.com/pate nts. Graco Headquarter s: Minneapol ...
У вас вопрос, касающийся Graco 24M499?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Graco 24M499, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Graco 24M499 со всей вероятностью он захочет поделиться методом ее решения.