Инструкция обслуживания HP (Hewlett-Packard) 6-Port SATA RAID

25 страниц 0.66 mb
Скачать

Перейти на страницу of 25

Summary
  • HP (Hewlett-Packard) 6-Port SATA RAID - page 1

    6 -P or t S A T A R AI D Co ntr oller User G u ide Part number: 377602-003 Third edition: May 2006 ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 2

    2 Legal notices © Copyright 2004, 2006 Hewlett- Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and servi c es. Nothing herein should be construed as constit uting an a ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 3

    Contents 3 Contents 1 Board components and features Controller specificatio ns and attributes ....................................................................................... ................. 4 2 Installation and configuration procedures Overview of the inst allation process .................................................................. ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 4

    Board compone nts and features 4 1 Boar d co mponents and f eatur es Figure 1-1 6-Port SATA RAID Controller 1 Internal SATA port 0 3 Flash jumper 2 Internal SATA port 5 4 I2C connector C ontr oller spec ifi cati ons and attribu te s Table 1-1 Controller specifications and attributes Ambient temperature 0°C to 50°C (forced airflow is recommended, ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 5

    Installation and config uration procedures 5 2 Inst allati on and co nf i gur ation pr ocedur e s Ov erv i e w of the ins tallati on pr ocess 1. Install and configure the controller and hard drives. Fo r details, see “Installing the controller and drives” on page 5. The maximum supported size of the logical drive on this controller is 2 TB . NO ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 6

    Installation and config uration procedures 6 7. Attach the other end of the I2C able to the connector on the internal drive cage backplane board (2). Figure 2-1 8. Install drives in the internal SATA dr ive bay of the server, if necessary. The 6-Port SATA RAID Controller can support logical drives of up to 2 TB capacity. NOTE: To determine the numb ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 7

    Installation and config uration procedures 7 Assi gning the boot contr oller NOTE: If the server will contain two or more bootable controllers, read this section. Otherwise, omit this section. The 6-Port SATA RAID controller supports bootable drives and arrays. The default setting of the controller and system setup usually allows you to install and ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 8

    Installation and config uration procedures 8 13. On the next screen, respond as follows: Table 2-1 Entries for array properties Property line disp layed Entry or selection Array type Select the RAID level, and the press the Enter key. Array label Type a name, and then press the Enter key. Array size Press the Enter key, and then press the Enter key ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 9

    Appendix A: Electrostati c discharge 9 Appe ndi x A: Electr os tati c dis c har ge Pr e ven ting elec tr o s tati c dis c har ge To prevent damaging the system, be aw are of the precautions you must follo w when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor ma y damage system boards or o ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 10

    Appendix B: Regulatory compliance notices 10 Appe ndi x B: R egulato r y compliance n oti ce s F eder al C omm uni cati ons C ommis si on noti ce Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to prov ide an interference-free r adio frequency spectrum. Many electroni ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 11

    Appendix B: Regulatory compliance notices 11 For questions regarding this FCC declaratio n, contact us by mail or telephone: • Hewlett-Packard Company P. O. Box 692000, Ma il Stop 510101 Houston, Texas 77269-2000 • 1-281-514-333 3 To identify this product, refer to the part, series, or model nu mber found on the product. Modifications The FCC r ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 12

    Appendix B: Regulatory compliance notices 12 Japanes e noti ce K or ean noti ces Class A Equipment Class B Equipment ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 13

    Appe ndix C: Using t he RAI D Confi gura tion U tility 1 3 Appe ndi x C: Using the RAI D Co nf i gur atio n Utility The RAID Configuration Utility is loaded on the controlle r ROM. The utility is used to create, configure, and manage arrays, and make arrays bootable. It is also used to initialize and rescan drives. To run the utility, press Ctrl+A ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 14

    Appe ndix C: Using t he RAI D Confi gura tion U tility 1 4 14. Select the method by which you wa nt the array to be created. • Build/Verify conducts a background initialization on the array. The array is available immediately, although performance is degraded. • Quick Init also enables the array to be available i mmediately, without any ongoing ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 15

    Appe ndix C: Using t he RAI D Confi gura tion U tility 1 5 4. Press the Enter key. The following message appears: Warning!! Deleting will erase all the data from the array. Do you still want to continue? (Yes/No): 5. Select Yes to delete the array, or No to return to the previous menu. 6. In the Array Properties dialog box, select Delete again, and ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 16

    Appe ndix C: Using t he RAI D Confi gura tion U tility 1 6 Re sc a n n i n g d rive s 1. Restart the computer. 2. When the appropriate prompt appears, press Ctrl+A to access the RAID Configuration Utility. 3. From the RAID Configuration Utility menu, select Array Configuration Utility. 4. Select Rescan Drives. ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 17

    Appendix D: About RAID 17 Appe ndi x D: Abou t RAI D A Redundant Array of Independent Disk (RAID) provides better performance and reliability from combinations of drives than is possible with the same total storage space without RAID. This Appendix describes the various RAID levels supported by the 6-Port SATA RAID controller. The following table s ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 18

    Appendix D: About RAID 18 RAID 1 A RAID 1 array is created by copying, or mirroring, a ll data from one drive onto a second drive. This mirroring provides redundancy, ensuring that if one drive fails no data is lost. Howeve r, redundancy also means that only half the total capacity is available. Figure 4 A RAID 1 array A RAID 1 array has no write p ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 19

    Appendix D: About RAID 19 RAID 10 This dual-level RAID type is created by using two or mo re equal-sized RAID 1 arrays to create a RAID 0 array. Both read and write performance are improved becaus e array striping occurs. However, the performance improvement requires that additional storage s pace be used because the arrays are mirrored. Figure 6 A ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 20

    Appendix D: About RAID 20 RAID 50 This dual-level RAID type is created by using two or mo re equal-sized RAID 5 arrays to create a RAID 0 array. The top level RAID 0 array shares the load among the second-level RAID 5 a rrays, improving both read and write performance. Parity (Pa n or Pb n ), used in the second level RAID 5 a rrays, provides effici ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 21

    Glossary 2 1 Glo ss ar y activity See task. array A logical disk created from avai lable space a nd made up of one or more partitions on one or more physical disks. Arrays are typically used to provide data redundancy or enhanced I/O performance. See also container , volume , spanned volume , and RAID signature . Also know n as a container. array i ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 22

    Glossary 2 2 degraded A redundant array (for example, a RAID 1 array) in which one or more members have failed. The data is intact, but redundancy has been co mpromised. Any further failure would cause the array to fail and result in data loss. dirty data Data that has been written to a cache, but which has not been flushed out to its final destina ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 23

    Glossary 2 3 impacted An impacted array is one which has been crea ted, but for some reason the initial build operation did not complete. All member driv es are present and operational, and all data written to the array is protected. To opti mize the array, run a Verify with Fix task. initialize Process of preparing a disk for use by the controller ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 24

    Glossary 2 4 redundant The ability of an array to main tain operability when one or more hardware failures occur. RAID 1 array is an example of a redundant arra y. In the event of a drive failure, redundant arrays can be restored to normal operation by replacing the failed drive and rebuilding the array. rescan Process of updating the current scree ...

  • HP (Hewlett-Packard) 6-Port SATA RAID - page 25

    Index 25 Inde x B board components, 4 boot controller, ass igning, 7 bootable a rray, crea ting, 7 BSMI notice, 11 C cables, 11 Canadian notice, 11 controller attribu tes, 4 controller feat ures, 4 controller specification s, 4 D declaration of conformity, 10 driver, installation of , 8 drives, number of, for a given RAID level, 17 E electrostatic ...

Производитель HP (Hewlett-Packard) Категория Network Card

Документы, которые мы получаем от производителя устройства HP (Hewlett-Packard) 6-Port SATA RAID мы можем разделить на несколько групп. Это в частности:
- технические чертежи HP (Hewlett-Packard)
- инструкции обслуживания 6-Port SATA RAID
- паспорта изделия HP (Hewlett-Packard)
- информационные брошюры
- энергетические этикетки HP (Hewlett-Packard) 6-Port SATA RAID
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания HP (Hewlett-Packard) 6-Port SATA RAID.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа HP (Hewlett-Packard) 6-Port SATA RAID, инструкции обслуживания, короткие инструкции или инструкции пользователя HP (Hewlett-Packard) 6-Port SATA RAID. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия HP (Hewlett-Packard) 6-Port SATA RAID.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства HP (Hewlett-Packard) 6-Port SATA RAID, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании HP (Hewlett-Packard) 6-Port SATA RAID пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей HP (Hewlett-Packard) 6-Port SATA RAID.

Полная инструкция обслуживания HP (Hewlett-Packard), должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией HP (Hewlett-Packard) 6-Port SATA RAID - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания HP (Hewlett-Packard) 6-Port SATA RAID, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся HP (Hewlett-Packard) 6-Port SATA RAID, которое найдем в данном документе
3. Советы по использованию основных функций устройства HP (Hewlett-Packard) 6-Port SATA RAID - которые должны облегчить нам первые шаги во время использования HP (Hewlett-Packard) 6-Port SATA RAID
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем HP (Hewlett-Packard) 6-Port SATA RAID
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра HP (Hewlett-Packard) 6-Port SATA RAID в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся HP (Hewlett-Packard) 6-Port SATA RAID?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с HP (Hewlett-Packard) 6-Port SATA RAID, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с HP (Hewlett-Packard) 6-Port SATA RAID со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)