Русский dropdown-ico

Инструкция обслуживания Asus P4SP-MX SE

64 страниц 2.89 mb
Скачать

Перейти на страницу of 64

Summary
  • Asus P4SP-MX SE - page 1

    Motherboard P4SP-MX SE User Guide ...

  • Asus P4SP-MX SE - page 2

    ii Checklist Copyright © 2004 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes ...

  • Asus P4SP-MX SE - page 3

    iii Contents Notices ............................................................................................ v Safety information .......................................................................... vi P4SP-MX SE specification summary ............................................ vii About this guide ...................................... ...

  • Asus P4SP-MX SE - page 4

    iv Safeguards Contents Chapter 2: BIOS information 2.1 Managing and updating your BIOS .................................... 2-2 2.1.1 Creating a bootable floppy disk ............................. 2-2 2.1.2 Using ASUS EZ Flash to update the BIOS ............ 2-3 2.1.3 Using the AFLASH utility ........................................ 2-4 2.1.4 Recove ...

  • Asus P4SP-MX SE - page 5

    v Notices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been test ...

  • Asus P4SP-MX SE - page 6

    vi Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all ...

  • Asus P4SP-MX SE - page 7

    vii P4SP-MX SE specification summar y* CPU Chipset Front Side Bus (FSB) Memory Expansion slots VGA Storage Audio LAN Special features Rear panel I/O Internal I/O BIOS features (Continued on the next page.) Socket 478 for Intel ® Pentium ® 4/Celeron processor Intel ® Hyper-Threading technology ready New power design for next generation Intel ® P ...

  • Asus P4SP-MX SE - page 8

    viii P4SP-MX SE specification summar y PCI 2.2, USB 2.0/1.1 WOL/WOR by PME, DMI 2.0, WfM 2.0 Micro-A TX form factor: 9.6 in x 9.6 in (24.5 cm x 24.5 cm) Device drivers ASUS PC Probe ASUS LiveUpdate ASUS Screensaver Adobe Acrobat Reader T rend Micro™ PC-cillin 2002 anti-virus software Microsoft ® DirectX 9.0 Industry standard Manageability Form F ...

  • Asus P4SP-MX SE - page 9

    Chapter 1 This chapter describes the features of the motherboard. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors. Product introduction ...

  • Asus P4SP-MX SE - page 10

    1-2 Chapter 1: Product introduction 1 . 1 W elcome! Thank you for buying the ASUS ® P4SP-MX SE motherboard! The ASUS P4SP-MX SE motherboard delivers a host of new features and latest technologies making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check ...

  • Asus P4SP-MX SE - page 11

    ASUS P4SP-MX SE motherboard user guide 1-3 The SiS651 Northbridge chip is a high performance Host Memory Controller for the Intel ® Pentium ® 4 processor , and supports a 2D/3D graphic engine, memory controller , AGP 4X, and 533MHz front side bus. The SiS651 interconnects with the SiS962L Southbridge chip at speeds of up to 533MB/s using the prop ...

  • Asus P4SP-MX SE - page 12

    1-4 Chapter 1: Product introduction 1.3.2 ASUS unique features ASUS CrashFree BIOS CrashFree BIOS allows users to restore BIOS data from a floppy diskette even when BIOS code and data are corrupted during upgrade or invaded by a virus. Unlike other competing vendors’ products, ASUS motherboards now enable users to enjoy this protection feature wi ...

  • Asus P4SP-MX SE - page 13

    ASUS P4SP-MX SE motherboard user guide 1-5 1 .4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or to a metal object, ...

  • Asus P4SP-MX SE - page 14

    1-6 Chapter 1: Product introduction 1 .5 Motherboard over view 1.5.1 Motherboard layout FLOPPY1 P ANEL1 CD1 CHA_F AN1 SiS651 HOST/ Memory Controller AUX1 P4SP-MX SE ® GAME1 FP_AUDIO1 Super I/O 2Mbit Flash BIOS PCI Slot 1 SEC_IDE1 Accelerated Graphics Port (AGP) USBPWR_34 SiS962L MuTLOL Media I/0 A TX12V1 CPU_F AN1 24.4cm (9.6in) PRI_IDE1 SB_PWR1 U ...

  • Asus P4SP-MX SE - page 15

    ASUS P4SP-MX SE motherboard user guide 1-7 Do not overtighten the screws! Doing so may damage the motherboard. 1.5.2 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below . 1.5.3 S ...

  • Asus P4SP-MX SE - page 16

    1-8 Chapter 1: Product introduction 1 .6 Central Pr ocessing Unit (CPU) 1.6.1 Overview The Intel ® Pentium ® 4 processor has a gold triangular mark on one corner . This mark indicates the processor Pin 1 that should match a specific corner of the CPU socket. Incorrect installation of the CPU into the socket may bend the pins and severely damage t ...

  • Asus P4SP-MX SE - page 17

    ASUS P4SP-MX SE motherboard user guide 1-9 1.6.2 Installing the CPU Follow these steps to install a CPU. 1. Locate the 478-pin ZIF socket on the motherboard. 2. Unlock the socket by pressing the lever sideways, then lift it up to a 90°- 100° angle. Make sure that the socket lever is lifted up to 90°-100° angle, otherwise the CPU does not fit in ...

  • Asus P4SP-MX SE - page 18

    1-10 Chapter 1: Product introduction 1 .7 System memor y 1.7.1 DIMM sockets location The following figure illustrates the location of the DDR DIMM sockets. • Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. • When ...

  • Asus P4SP-MX SE - page 19

    ASUS P4SP-MX SE motherboard user guide 1-11 1.7.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. Follow these steps to install a DIMM. 1. Unlock a DIMM socket by pressing the retaining clips outwar ...

  • Asus P4SP-MX SE - page 20

    1-12 Chapter 1: Product introduction 1.8.1 Installing an expansion card Follow these steps to install an expansion card. 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. 2. Remove the system unit cover (if your motherboard is already installed in a chassis). 3. ...

  • Asus P4SP-MX SE - page 21

    ASUS P4SP-MX SE motherboard user guide 1-13 Standard interrupt assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 N/A Programmable Interrupt 3* 1 1 Communications Port (COM2) 4* 12 Communications Port (COM1) 5* 13 IRQ holder for PCI steering 6 14 Floppy Disk Controller 7* 15 Printer Port (LPT1) 8 3 System CMOS/Re ...

  • Asus P4SP-MX SE - page 22

    1-14 Chapter 1: Product introduction 1.8.4 AGP slot The Accelerated Graphics Port (AGP) slot that supports AGP 4X (+1.5V) cards. When you buy an AGP card, make sure that you ask for one with +1.5V specification. Note the notches on the card golden fingers to ensure that they fit the AGP slot on the motherboard. This motherboard does not support 3.3 ...

  • Asus P4SP-MX SE - page 23

    ASUS P4SP-MX SE motherboard user guide 1-15 1 .9 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, i ...

  • Asus P4SP-MX SE - page 24

    1-16 Chapter 1: Product introduction 2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no power to CPU, DRAM in slow refresh, power sup ...

  • Asus P4SP-MX SE - page 25

    ASUS P4SP-MX SE motherboard user guide 1-17 1 . 10 Connectors This section describes and illustrates the motherboard rear panel and internal connectors. 1.10.1 Rear panel connectors 1. PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse. 2 . Parallel port. This 25-pin port connects a parallel printer , scanner , or other devices. 3. RJ- ...

  • Asus P4SP-MX SE - page 26

    1-18 Chapter 1: Product introduction 2. Floppy disk drive connector (34-1 pin FLOPPY1) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). 1.10.2 Internal con ...

  • Asus P4SP-MX SE - page 27

    ASUS P4SP-MX SE motherboard user guide 1-19 3. A TX power connectors (20-pin A TXPWR1, 4-pin A TX12V1) These connectors connect to an A TX 12V power supply . The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition ...

  • Asus P4SP-MX SE - page 28

    1-20 Chapter 1: Product introduction 6. USB header (10-1 pin USB56) If the USB ports on the rear panel are inadequate, a USB header is available for additional USB ports. Connect the USB cable of an optional USB 2.0 module to this header . Y ou may install the USB module in the chassis front panel. The module has two USB 2.0 ports for connecting ne ...

  • Asus P4SP-MX SE - page 29

    ASUS P4SP-MX SE motherboard user guide 1-21 7. Internal audio connectors (4-pin AUX1, CD1) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , or MPEG card. 8. GAME/MIDI connector (16-1 pin GAME1) This connector supports a GAME/MIDI module. Connect the GAME/MIDI cable with yellow connector to the ...

  • Asus P4SP-MX SE - page 30

    1-22 Chapter 1: Product introduction 9. Serial port connector (10-1 pin COM1) This connector accommodates the bundled serial port module. Use the COM cable to connect the serial port module to this connector , then install the module into a slot opening at the front or back of the system chassis. 10. System panel connector (10-1 pin P ANEL1) This c ...

  • Asus P4SP-MX SE - page 31

    ASUS P4SP-MX SE motherboard user guide 1-23 • A TX Power Switch / Soft-Off Switch Lead (2-pin PWRBTN) This connector connects a switch that controls the system power . Pressing the power switch turns the system between ON and SLEEP , or ON and SOFT OFF , depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more ...

  • Asus P4SP-MX SE - page 32

    1-24 Chapter 1: Product introduction ...

  • Asus P4SP-MX SE - page 33

    Chapter 2 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS information ...

  • Asus P4SP-MX SE - page 34

    2-2 Chapter 2: BIOS information 2. 1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS EZ Flash (Updates the BIOS using a floppy disk during POST .) 2. ASUS AFlash (Updates the BIOS using a floppy disk in DOS mode.) 3. ASUS CrashFree BIOS (Updates t ...

  • Asus P4SP-MX SE - page 35

    ASUS P4SP-MX SE motherboard user guide 2-3 2.1.2 Using ASUS EZ Flash to update the BIOS The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility . The EZ Flash is built-in the BIOS LPC chip so it is accessible by simply pressing <Alt&g ...

  • Asus P4SP-MX SE - page 36

    2-4 Chapter 2: BIOS information 2.1.3 Using the AFLASH utility AFLASH is a Flash Memory Writer utility that allows you to update the BIOS using a bootable floppy disk, or copy the original motherboard BIOS. This utility only works in DOS mode. Copying the original motherboard BIOS T o copy the original motherboard BIOS file: 1. Copy the AFLASH util ...

  • Asus P4SP-MX SE - page 37

    ASUS P4SP-MX SE motherboard user guide 2-5 T o update the BIOS: 1. Download an updated BIOS file from the ASUS website (www .asus.com) and save the file to the bootable floppy disk you earlier . 2. Reboot the computer from the floppy disk. 3. In DOS prompt, type AFLASH, then press <Enter> to run AFLASH. Updating the BIOS 6. When prompted, pre ...

  • Asus P4SP-MX SE - page 38

    2-6 Chapter 2: BIOS information 2.1.4 Recovering the BIOS with CrashFree BIOS The CrashFree BIOS auto recovery tool allows you to restore BIOS from a floppy disk that contains the BIOS file, in case the current BIOS on the motherboard fails or gets corrupted. • T o use the CrashFree BIOS feature on this motherboard, install a VGA card in one of t ...

  • Asus P4SP-MX SE - page 39

    ASUS P4SP-MX SE motherboard user guide 2-7 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file “P4SPMXSE.BIN”. Completed. Start flashing... DO NOT shutdown or reset the system while updating the BIOS! Doing so may cause system boot failure! 4. When the BIOS update process is complete, reboot the system ...

  • Asus P4SP-MX SE - page 40

    2-8 Chapter 2: BIOS information 4. From the FTP site, select the BIOS version that you wish to download. Click Next . 5. Follow the instructions on the succeeding screens to complete the update process. If you selected the option to update the BIOS from a file, a window pops up prompting you to locate the file. Select the file, click Save , then fo ...

  • Asus P4SP-MX SE - page 41

    ASUS P4SP-MX SE motherboard user guide 2-9 2.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features. POWER Use this menu to configure and enable Power Management features. B ...

  • Asus P4SP-MX SE - page 42

    2-10 Chapter 2: BIOS information 2.2.2 Legend bar At the bottom of the Setup screen is a legend bar . The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions. Navigation Key(s) Function Description <F1> or <Alt + H> Di ...

  • Asus P4SP-MX SE - page 43

    ASUS P4SP-MX SE motherboard user guide 2-11 2.3 Main menu When you enter the Setup program, the following screen appears. Sub-menu Note that a right pointer symbol (as shown on the left) appears to the left of certain fields. This pointer indicates that you can display a sub-menu from this field. A sub- menu contains additional options for a field ...

  • Asus P4SP-MX SE - page 44

    2-12 Chapter 2: BIOS information Legacy Diskette A [1.44M, 3.5 in.] Sets the type of floppy drive installed. Configuration options: [None] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] Floppy 3 Mode Support [Disabled] This is required to support older Japanese floppy drives. The Floppy 3 Mode feature allows r ...

  • Asus P4SP-MX SE - page 45

    ASUS P4SP-MX SE motherboard user guide 2-13 2.3.1 Primary and Secondary Master/Slave T ype [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard di ...

  • Asus P4SP-MX SE - page 46

    2-14 Chapter 2: BIOS information If no drive is installed or if you are removing a drive and not replacing it, select [None]. Other options for the T ype field are: [CD-ROM] - for IDE CD-ROM drives [LS-120] - for LS-120 compatible floppy disk drives [ZIP] - for ZIP-compatible disk drives [MO] - for IDE magneto optical disk drives [Other A T API Dev ...

  • Asus P4SP-MX SE - page 47

    ASUS P4SP-MX SE motherboard user guide 2-15 Multi-Sector T ransfers [Maximum] This option automatically sets the number of sectors per block to the highest number that the drive supports. Note that when this field is automatically configured, the set value may not always be the fastest value for the drive. Y ou may also manually configure this fiel ...

  • Asus P4SP-MX SE - page 48

    2-16 Chapter 2: BIOS information CPU External Frequency (XXX/XX) This item is configurable only when you set the CPU Speed item to [Manual]. This feature tells the clock generator what frequency to send to the system bus and PCI bus. The bus frequency (external frequency) multiplied by the bus multiple equals the CPU speed. Keyboard Auto-Repeat Rat ...

  • Asus P4SP-MX SE - page 49

    ASUS P4SP-MX SE motherboard user guide 2-17 Memory Frequency [Auto] This field determines whether the memory clock frequency is set to be in synchronous or asynchronous mode with respect to the system frequency . The options that appear in the popup menu vary according to the CPU Frequency (MHz). Configuration options: [Auto] [266MHz] [333MHz] [400 ...

  • Asus P4SP-MX SE - page 50

    2-18 Chapter 2: BIOS information 2.4.1 Chip Configuration SDRAM Configuration [By SPD] This parameter allows you to set the optimal timings for items 2–5, depending on the memory modules you are using. The default setting is [By SPD], which configures items 2 ~ 5 by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on th ...

  • Asus P4SP-MX SE - page 51

    ASUS P4SP-MX SE motherboard user guide 2-19 Graphics Aperture Size [64MB] This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB] AGP Fast Write Capability [Enabled] This field enables or disables the AGP 4x Fast W rite Capability feature. Configuratio ...

  • Asus P4SP-MX SE - page 52

    2-20 Chapter 2: BIOS information 2.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] Setting this item to [Read Only] allows the floppy disk drive to only read data from a floppy disk. The default setting [R/W] allows both reading and writing data to a floppy disk. Configuration options: [R/W] [Read Only] Onboard Serial Port 1 [3F8H/IRQ ...

  • Asus P4SP-MX SE - page 53

    ASUS P4SP-MX SE motherboard user guide 2-21 2.4.3 PCI Configuration Slot 1, Slot 2, Slot 3 IRQ [Auto] These fields automatically assign the IRQ for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ assignments. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [1 1] [12] [14] [15] PC ...

  • Asus P4SP-MX SE - page 54

    2-22 Chapter 2: BIOS information Onboard PCI Devices Control Onboard LAN [Enabled] This field allows you enable or disable the onboard LAN. Configuration options: [Disabled] [Enabled] Onboard LAN Boot ROM [Disabled] This field allows you enable or disable the onboard LAN Boot ROM feature. Configuration options: [Disabled] [Enabled] Onboard AC97 Aud ...

  • Asus P4SP-MX SE - page 55

    ASUS P4SP-MX SE motherboard user guide 2-23 IRQ XX Reserved [No/ICU] These fields indicate whether or not the displayed IRQ for each field is being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that you are using the ISA Configuration Utility (ICU), and that this particular IRQ is NOT required by a legacy ISA ...

  • Asus P4SP-MX SE - page 56

    2-24 Chapter 2: BIOS information 2.5.1 Power Up Control Y our screen saver does not display when you select [Blank Screen] as your video-off method. [V/H SYNC+Blank] blanks the screen and turns off vertical and horizontal scanning. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS Standby] [DPMS Suspend] [DPMS OFF] [DPMS Reduce ON] HDD P ...

  • Asus P4SP-MX SE - page 57

    ASUS P4SP-MX SE motherboard user guide 2-25 W ake/Power Up On Ext. Modem [Disabled] This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled] The computer cannot receive or transmit data until the com ...

  • Asus P4SP-MX SE - page 58

    2-26 Chapter 2: BIOS information 2.6 Boot menu CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU, chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the specific field shows N/A. VCORE V oltag ...

  • Asus P4SP-MX SE - page 59

    ASUS P4SP-MX SE motherboard user guide 2-27 A T API CD-ROM This field allows you to select which A T API CD-ROM drive to use in the boot sequence. Pressing [Enter] will show the product IDs of all your connected A T API CD-ROM drives. Other Boot Device Select [INT18 Device (Network)] Configuration options: [Disabled] [SCSI Boot Device] [INT18 Devic ...

  • Asus P4SP-MX SE - page 60

    2-28 Chapter 2: BIOS information 2.7 Exit menu After configuring the BIOS save your changes and exit Setup. Select Exit from the menu bar to display the following menu. Exit & Save Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM ...

  • Asus P4SP-MX SE - page 61

    Chapter 3 This chapter describes the contents of the support CD that comes with the motherboard package. Software support ...

  • Asus P4SP-MX SE - page 62

    3-2 Chapter 3: Software support 3. 1 Install an oper ating system This motherboard supports Windows ® 98SE/ME/2000/XP operating system (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. Because motherboard settings and hardware options vary , use the setup procedures presented in ...

  • Asus P4SP-MX SE - page 63

    ASUS P4SP-MX SE motherboard user guide 3-3 3.2.2 Installation items The Installation Items window displays the available device drivers and applications that this motherboard supports. Install the necessary drivers to activate the devices on your motherboard. SiS Mini IDE Driver Click this item to install the SiS Mini IDE driver . SiS 650/651 Displ ...

  • Asus P4SP-MX SE - page 64

    3-4 Chapter 3: Software support Screen display and utilities option may not be the same for other operating system version. ASUS Screen Saver This item installs the ASUS screen saver . Show Motherboard Information Click this item to display the general specifications for the P4SP-MX SE motherboard. Browse Support CD Click this item to display the s ...

Производитель Asus Категория Computer Hardware

Документы, которые мы получаем от производителя устройства Asus P4SP-MX SE мы можем разделить на несколько групп. Это в частности:
- технические чертежи Asus
- инструкции обслуживания P4SP-MX SE
- паспорта изделия Asus
- информационные брошюры
- энергетические этикетки Asus P4SP-MX SE
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Asus P4SP-MX SE.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Asus P4SP-MX SE, инструкции обслуживания, короткие инструкции или инструкции пользователя Asus P4SP-MX SE. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Asus P4SP-MX SE.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Asus P4SP-MX SE, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Asus P4SP-MX SE пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Asus P4SP-MX SE.

Полная инструкция обслуживания Asus, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Asus P4SP-MX SE - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Asus P4SP-MX SE, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Asus P4SP-MX SE, которое найдем в данном документе
3. Советы по использованию основных функций устройства Asus P4SP-MX SE - которые должны облегчить нам первые шаги во время использования Asus P4SP-MX SE
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Asus P4SP-MX SE
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Asus P4SP-MX SE в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Asus P4SP-MX SE?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Asus P4SP-MX SE, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Asus P4SP-MX SE со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)