-
Phoenix Gold pm700 - page 1
DECLARATION OF CONFORMITY CARVER PROFESSIONAL INTERNATIONAL (supplier ’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm700/950 (name, type or model, lot, batch or serial number, possibly sources and numbers of items) to which this declaration relates is in conformity with the fol ...
-
Phoenix Gold pm700 - page 2
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound applications. Their rugged construction and low profil ...
-
Phoenix Gold pm700 - page 3
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound applications. Their rugged construction and low profil ...
-
Phoenix Gold pm700 - page 4
pm7 00 • 225W per channel into 8 ohms 350W per channel into 4 ohms 700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post output connectors • Independent 11 detent level controls for CH1 and CH2 • External Level Control Defeat Switch • Dual Mono mode for operating bo ...
-
Phoenix Gold pm700 - page 5
pm7 00 • 225W per channel into 8 ohms 350W per channel into 4 ohms 700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post output connectors • Independent 11 detent level controls for CH1 and CH2 • External Level Control Defeat Switch • Dual Mono mode for operating bo ...
-
Phoenix Gold pm700 - page 6
Power Output: (20 Hz to 20kHz, with no more than 0.1%) 325 watts per channel into 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohms at 1kHz, with no more than 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz (±0.75dB) Channel Separation: >65 dB @ 1kHz Damping Factor: <400 Input Impedance: 25 ...
-
Phoenix Gold pm700 - page 7
Power Output: (20 Hz to 20kHz, with no more than 0.1%) 325 watts per channel into 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohms at 1kHz, with no more than 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz (±0.75dB) Channel Separation: >65 dB @ 1kHz Damping Factor: <400 Input Impedance: 25 ...
-
Phoenix Gold pm700 - page 8
6 7 8 9 10 11 12 6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMAL STEREO operation, use CH 1 and CH 2 inputs. For DUAL MONO or BRIDGED MONO operation, use CH 2 input only (see page 14 for instr ...
-
Phoenix Gold pm700 - page 9
6 7 8 9 10 11 12 6. BRIDGED OPERATION The STEREO/MONO switch is located just behind the input panel. This switch is used to select between NORMAL STEREO operation, DUAL MONO operation, or BRIDGED MONO operation. For NORMAL STEREO operation, use CH 1 and CH 2 inputs. For DUAL MONO or BRIDGED MONO operation, use CH 2 input only (see page 14 for instr ...
-
Phoenix Gold pm700 - page 10
model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, the output level of the amplifier, and the crest factor and duty cycle of the program material. Under typical conditions reproducing rock musi ...
-
Phoenix Gold pm700 - page 11
model and enough current to allow full-power operation of all the amplifiers plugged into it. The current demand of a power amplifier varies depending on several factors, including the impedance of the load, the output level of the amplifier, and the crest factor and duty cycle of the program material. Under typical conditions reproducing rock musi ...
-
Phoenix Gold pm700 - page 12
Output Wiring Use heavy gauge wire for speaker connections. The greater the distance between the amplifier and the speakers, the larger the diameter the wire should be to minimize power losses across the wire and improve the damping of the speaker . W ire thickness specifications (or gauges) get larger as the wire gets thinner; thus 14-gauge wire i ...
-
Phoenix Gold pm700 - page 13
Output Wiring Use heavy gauge wire for speaker connections. The greater the distance between the amplifier and the speakers, the larger the diameter the wire should be to minimize power losses across the wire and improve the damping of the speaker . W ire thickness specifications (or gauges) get larger as the wire gets thinner; thus 14-gauge wire i ...
-
Phoenix Gold pm700 - page 14
Oper a ting Tips Using the pm700 / pm950 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want. • When you power the system up for the ...
-
Phoenix Gold pm700 - page 15
Oper a ting Tips Using the pm700 / pm950 Once the amplifier has been installed and wired into the system, you are ready to use it. Here are some tips to help you get the most from it. • V erify that the switches (Stereo / Mono, Clipping Eliminator and Level Defeat) have been set to the mode that you want. • When you power the system up for the ...
-
Phoenix Gold pm700 - page 16
Figure 9 Input Polarity The XLR input connectors on the pm700 / pm950 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board. Cross-wire JP3 and JP4 to change the input polarity of CH 1 and cross-wire JP1 and JP2 to chan ...
-
Phoenix Gold pm700 - page 17
Figure 9 Input Polarity The XLR input connectors on the pm700 / pm950 are shipped from the factory with pin 2 hot (+), as indicated on the rear panel. The polarity of the balanced inputs can be reversed by changing four jumpers located on the Input Board. Cross-wire JP3 and JP4 to change the input polarity of CH 1 and cross-wire JP1 and JP2 to chan ...
-
Phoenix Gold pm700 - page 18
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIAL AND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage caused by shipment, 2) damage caused by accident, misuse, abuse, failure to perform owner maintenance, or operation contrary to the instructions in the ...
-
Phoenix Gold pm700 - page 19
W arranty Informa tion Professional Power Amplifiers: 5 years WHA T IS COVERED: THIS W ARRANTY COVERS DEFECTS IN MATERIAL AND WORKMANSHIP ONL Y. This limited W arranty DOES NOT extend to: 1) Damage caused by shipment, 2) damage caused by accident, misuse, abuse, failure to perform owner maintenance, or operation contrary to the instructions in the ...
-
Phoenix Gold pm700 - page 20
DECLARATION OF CONFORMITY CARVER PROFESSIONAL INTERNATIONAL (supplier ’ s name) 9300 N. DECATUR, PORTLAND, OR 97203 USA (address) declare under our sole responsibility that the product pm700/950 (name, type or model, lot, batch or serial number, possibly sources and numbers of items) to which this declaration relates is in conformity with the fol ...
У вас вопрос, касающийся Phoenix Gold pm700?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Phoenix Gold pm700, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Phoenix Gold pm700 со всей вероятностью он захочет поделиться методом ее решения.