-
Marathon MAGNUM ROUTER - page 1
I MAGNUM ROUTER User’s Guide Release 2.0 marathonstore.com Where Customer Service Comes First ...
-
Marathon MAGNUM ROUTER - page 2
II ...
-
Marathon MAGNUM ROUTER - page 3
III About this Guide The Magnum Router User’s Guide describes how to install and configure the Magnum Router. The Magnum Router is shipped with the Magnum GUI (graphical user interface) Manager , a configuration and management software for Windows 95, 98, 2000, ME, XP and NT Workstation 4.0. The Magnum Router GUI Manager and all its features are ...
-
Marathon MAGNUM ROUTER - page 4
IV Conventions Used in the Manual Throughout this user manual, some information is outlined to inform of important items regarding the section. Text with this icon is to inform of cautionary information Text with this icon is to inform of general information Text with this icon is to inform of information that could cause errors if programmed or us ...
-
Marathon MAGNUM ROUTER - page 5
V Table of Contents CHAPTER 1: INTRODUCTION ................................................................ 1-1 About the Magnum Router ..........................................................................................1-1 CHAPTER 2: MAGNUM ROUTER FEATURES ...................................... 2-1 Magnum Router Specifications ............. ...
-
Marathon MAGNUM ROUTER - page 6
VI CHAPTER 7: MAGNUM ROUT ER GUI MANAGER ................................ 7-1 Magnum Router Manager Main Screen ......................................................................7-2 Toolbar Buttons .......................................................................................................7-2 New Config Button ....................... ...
-
Marathon MAGNUM ROUTER - page 7
VII END USER License Agreement (EULA) END USER LICENSE AGREEMENT FOR MAGNUM ROUTER MANAGER SOFTWARE IMPORTANT READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement betw een you (either an indiv idual person or a single legal entity, who w ill be referred to in this EULA as "You") and the Licensor for the ...
-
Marathon MAGNUM ROUTER - page 8
VIII No rental, leasing or commercial hosting. You may not rent, lease, lend or provide commercial hos ting services to third parti es with the Software. Support Services. Licensor may provide You with s upport services related to the Softw are ("Support Services"). Use of Support Services is governed by the policies and programs describe ...
-
Marathon MAGNUM ROUTER - page 9
IX NON-INFRINGEMENT WITH RE GARD TO THE Software. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLIC ABLE LAW, IN NO EVENT SHALL WESTERN NRG, INC. OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDI NG, BUT NOT LIMITED TO, DAMAGES FOR ...
-
Marathon MAGNUM ROUTER - page 10
X ...
-
Marathon MAGNUM ROUTER - page 11
Chapter 1: Introduction ___________________________________________________________________ 1-1 Chapter 1: Introduction Introduction Congratulations on your purchase of the M agnum Router Module. The Magnum Router Module is a high performance IP Router and Frame Rela y Switch. With the Frame Relay Switch, you can create a private network, access a ...
-
Marathon MAGNUM ROUTER - page 12
Chapter 1: Introduction ___________________________________________________________________ 1-2 ...
-
Marathon MAGNUM ROUTER - page 13
Chapter 2: Magnum Router Features ___________________________________________________________________ 2-1 Chapter 2: Magnum Router Features Scaleable The Magnum Router’s 4 Serial WAN architecture allows enterprise networks to scale from multipoint frame relay networks to multiple dedicated digital networks or a hybrid network of carrier frame rel ...
-
Marathon MAGNUM ROUTER - page 14
Chapter 2: Magnum Router Features ___________________________________________________________________ 2-2 Magnum Router Specifications Microprocessor Motorola MPC-860T, 50Mhz Memory 64 MB SDRAM, 2MB FLASH, 16MB FLASH DISK-ON-CHIP Interface Connections One male DB 25 V.35 (M1), Three male DB25 V.35 WAN ports, One female DB25 RS-232 console port, One ...
-
Marathon MAGNUM ROUTER - page 15
Chapter 2: Magnum Router Features ___________________________________________________________________ 2-3 Installation Requirements The following items will be required to inst all and operate the Magnum Router module: • A Marathon base unit. • The Magnum GUI Manager software (included), running on a PC with Microsoft Windows 95, 98, 2000, ME, ...
-
Marathon MAGNUM ROUTER - page 16
Chapter 2: Magnum Router Features ___________________________________________________________________ 2-4 ...
-
Marathon MAGNUM ROUTER - page 17
Chapter 3: Pre-Installation ___________________________________________________________________ 3-1 Chapter 3: Pre-Installation Planning and Preparation Installing and configuring a Magnum Router module / Marathon system takes some up-front planning. It is advisable to consider a number of configurations before deciding on the one that is best for ...
-
Marathon MAGNUM ROUTER - page 18
Chapter 3: Pre-Installation ___________________________________________________________________ 3-2 The following items are also helpful (if not critical) for the planning phase to be completed: • Determine the Name of your Magnum Router • Determine the WAN Configuration (Port Settings) • Determine the Master WAN IP Address • Determine the ...
-
Marathon MAGNUM ROUTER - page 19
Chapter 4: Installing the Hardware ___________________________________________________________________ 4-1 Chapter 4: Installing the Hardware Installing the Magnum Router Module into the Marathon base unit Follow these steps to install the hardware. 1. Remove the power cord from the Marathon base unit. Remove the top cover. Remove all of the necess ...
-
Marathon MAGNUM ROUTER - page 20
Chapter 4: Installing the Hardware ___________________________________________________________________ 4-2 5. Connect the appropriate M1 to A1 cable from the M1 port of the Magnum Router to the A1 port of the Marathon base unit. Connect the appropriate WAN port cables to their respective CSU/DSU’s Connect the manager console cable. 6. Power on th ...
-
Marathon MAGNUM ROUTER - page 21
Chapter 5: Magnum Router Manager Installation ___________________________________________________________________ 5-1 Chapter 5: Magnum Router Manager Installation About the Manager Software The Magnum Router GUI Manager is a conf iguration and management software for the Magnum Router that runs on Windows. The Manager functions much the same as ot ...
-
Marathon MAGNUM ROUTER - page 22
Chapter 5: Magnum Router Manager Installation ___________________________________________________________________ 5-2 After the pre-installation screen has completed any checking, the main installation screen will be displayed: Figure 2 - Setup Confirmation Screen Click on OK to continue the installation, or click Ex it Setup to abort the installat ...
-
Marathon MAGNUM ROUTER - page 23
Chapter 5: Magnum Router Manager Installation ___________________________________________________________________ 5-3 Click on the Setup button at the top of the screen to continue the installation. Figure 4 - Setup Program, Program Group During the installation, the setup program will request a program group. By default, the program group is Magnu ...
-
Marathon MAGNUM ROUTER - page 24
Chapter 5: Magnum Router Manager Installation ___________________________________________________________________ 5-4 Once the installation process has completed, the setup program will display the following message: Figure 6 - Setup Program, Installation Complete Screen Click on OK to return to the windows desktop. Upgrading the Magnum Router Mana ...
-
Marathon MAGNUM ROUTER - page 25
Chapter 5: Magnum Router Manager Installation ___________________________________________________________________ 5-5 First-Time Startup When the Magnum Router Manager first starts, it looks for setup information. If this is the first time that you’re running the manager, the communication port settings screen will appear. Sav e a ny configur a t ...
-
Marathon MAGNUM ROUTER - page 26
Chapter 5: Magnum Router Manager Installation ___________________________________________________________________ 5-6 ...
-
Marathon MAGNUM ROUTER - page 27
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-1 Chapter 6: Logging Onto a Magnum Router After the initial installation of the Magnum Router Manager software and it’s setup, the main login screen is displayed. This screen is only displayed when the Magnum Router Manager is first start ...
-
Marathon MAGNUM ROUTER - page 28
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-2 Marathon Matrix Cabling It is possible to connect to a Magnum Router through a Marathon Async port either by direct cable connection or by modem connection. In order to perform a Marathon Matrix connection, there must be 2 available Async ...
-
Marathon MAGNUM ROUTER - page 29
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-3 Modem Connection Cabling To connect a Modem to the Magnum Router, some preparation is required to ensure that the Modem and the Magnum Router communicate properly. The external modem must be a Hayes compatible type (responds to the AT com ...
-
Marathon MAGNUM ROUTER - page 30
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-4 Magnum Router Login Screen By pa ss t h e L OGI N Process a nd go dire ctly to the Ma gnu m Rou te r Mana ge r Main Scr e en Conne ct to a Ma gnum Route r using t he se le cte d L OGIN MET H OD Sta rt the TEXT ONLY t er mi n al pr og r am ...
-
Marathon MAGNUM ROUTER - page 31
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-5 Console Login The default for logging onto a Magnum Router is a serial connection from the PC that is running the Magnum Router Manager software to a Magnum Router card. The connection is accomplished by connecting either the supplied DB- ...
-
Marathon MAGNUM ROUTER - page 32
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-6 Telnet This allows Ethernet access to the Magnum Router. Selecting this option will show an additional section to the main login screen. By pa ss t h e L OGI N Process a nd go dire ctly to the Ma gnu m Rou te r Mana ge r Ma in Sc ree n Co ...
-
Marathon MAGNUM ROUTER - page 33
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-7 Micom Marathon Matrix This gives the ability to connect to the Magnum Router’s console port via a Micom Marathon matrix connection. This connection is done by a NODE/CHANNEL connection type. By pa ss t h e L OGI N Process a nd go dire c ...
-
Marathon MAGNUM ROUTER - page 34
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-8 Below is an example of connecting a PC to the Marathon unit, and connecting the Marathon unit to the Magnum Router. PC M5000C/CP M5000C/MATRIX Marat hon Node Name: T OP To use a login method of Marathon Matrix for the above example, fill ...
-
Marathon MAGNUM ROUTER - page 35
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-9 Modem By default, the Magnum Router manager does not send any command strings to the attached modem. In some cases, it is necessary to send special commands to the PC’s modem in order to make it work properly. The Magnum Router Manager ...
-
Marathon MAGNUM ROUTER - page 36
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-10 From this point on, the Magnum Router Manager will send the entered commands before dialing the selected number. If there is a modem change on the PC that is running the Magnum Router Manager, then these commands may be changed or delete ...
-
Marathon MAGNUM ROUTER - page 37
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-11 Magnum Router Manager Phone Directory Figure 11 - Magnum Router Phone Directory Screen Adding Entries in the Phone Directory To add an entry in the Phone Directory, perform the following steps: 1. Click on New Entry or press ATL-N 2. Fil ...
-
Marathon MAGNUM ROUTER - page 38
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-12 Changing a Phone Directory Entry It is possible to change an entry after it has been entered into the table. Follow these steps to change an entry: 1. Double-Click on the entry that needs modification in the table This will cause all of ...
-
Marathon MAGNUM ROUTER - page 39
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-13 Upon a successful connection, the Magnum Router Manager’s status will change and reflect that there is a MODEM connection as shown below. If an error occurs during the modem connection, an error message will appear. One possible error ...
-
Marathon MAGNUM ROUTER - page 40
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-14 Login Messages After selecting the desired login method, select connect by either clicking on C onnect , or pressing ALT-C. If Modem was selected, the dialing directory will appear (see above), but if any other method was selected, the s ...
-
Marathon MAGNUM ROUTER - page 41
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-15 If Y es was selected, the following screen will appear, reporting that the manager is getting the connected Magnum Router’s stored configuration. Other Login Screen Options There are 2 other buttons on the login screen. Select this but ...
-
Marathon MAGNUM ROUTER - page 42
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-16 Magnum Router Manager Terminal This option opens a text-based terminal. This can be used to program optional equipment (such as a Micom Marathon) without having to exit the Magnum Router Manager. It is NOT a VT100 terminal emulator. This ...
-
Marathon MAGNUM ROUTER - page 43
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-17 Selecting Activate Terminal will display the Magnum Router Manager terminal screen. Figure 12 - Magnum Router Manager Terminal Screen The terminal program has an internal scroll back buffer of 4000 bytes, the ability to capture incoming ...
-
Marathon MAGNUM ROUTER - page 44
Chapter 6: Logging Onto a Magnum Router ___________________________________________________________________ 6-18 Magnum Router Manager Terminal Commands As seen in the above screen, the terminal has 3 basic commands: This sends a “break” sequence to the attached device. As an example, it is required to send 3 “break” sequences to terminate ...
-
Marathon MAGNUM ROUTER - page 45
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-1 Chapter 7: Magnum Router GUI Manager The Manager User Interface The Magnum Router GUI Manager uses a graphica l user interface common to most Windows programs. Movement around the manager is done by either clicking the button or menu item, u ...
-
Marathon MAGNUM ROUTER - page 46
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-2 Magnum Router Manager Main Screen Menu B ar Toolb ar Magnum Name . Display 's the na me a ssigned to the Ma gnum Route r tha t the Ma na ge r is currently lo gge d into Re m o te A ccess. This ONLY shows whe n a Ma gnum Route r is being ...
-
Marathon MAGNUM ROUTER - page 47
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-3 New Config Button This button can be accessed by pressing ALT-N, or selecting New Configuration from the Configuration menu. Select this button to create an empty configuration in the Magnum Router Manager customization. Selecting this item ...
-
Marathon MAGNUM ROUTER - page 48
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-4 Port Config Button Select Port Config to configure the physical and logical characteristics of the WAN ports of the Magnum Router (the WAN ports are M1, WAN1, WAN2 and WAN3). Physical characteristics determine whether the port is DTE (accept ...
-
Marathon MAGNUM ROUTER - page 49
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-5 Below is a description of the fields on this screen: Port Selects the port to be configured. Mode Configures the port as physical DCE (supplies clock), DTE (receives clock), or Disable (disables the port altogether). Disable is recommended i ...
-
Marathon MAGNUM ROUTER - page 50
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-6 Baud Rate Sets the baud rate for the selected port. Choose from the baud rates available in the drop down list box. Notes The notes field of the Port Settings screen gives a convenient way to document data that is relevant to the selected po ...
-
Marathon MAGNUM ROUTER - page 51
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-7 WAN Config Button Click the W AN Config button on the Magnum Router Manager main screen, press ALT-W, or select WAN Configuration from the S ettings menu to access the WAN Configuration screen. In a frame relay environment, end-points are co ...
-
Marathon MAGNUM ROUTER - page 52
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-8 The Input and Output port fields of the WAN Configuration screen define the physical ports of the Magnum Router. The Private and Public DLCI fields define the DLCI end-points of a PVC. A PUBLIC DLCI would (in most cases) be the DLCI that is ...
-
Marathon MAGNUM ROUTER - page 53
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-9 Deleting a WAN Configuration Entry In some cases, a WAN entry may need to be deleted. To do this, follow these steps: 1. Select an entry in the table. 2. Either click the D elete Entry button or press ALT-D. 3. A verification question is ask ...
-
Marathon MAGNUM ROUTER - page 54
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-10 Master WAN-IP Address The Master WAN-IP address screen is only available via the WAN Configuration screen. The Magnum Router is a Frame Relay switch and IP router combined into a single product. The Master WAN-IP address screen allows users ...
-
Marathon MAGNUM ROUTER - page 55
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-11 Adding a Master WAN-IP Address Entry To add an entry in the Master WAN-IP screen, perform the following steps: 1. Click on N ew Entry or press ATL-N 2. Type in the Network Address, Subnet Mask and DLCI 3. Click Sav e Edit or press ALT-V 4. ...
-
Marathon MAGNUM ROUTER - page 56
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-12 WAN-IP Route Map The WAN IP Route Map screen is only available via the WAN Configuration screen. The next step will be to fill data into the WAN-IP Route Map screen. The purpose of the WAN- IP Route Map is to set the destination network add ...
-
Marathon MAGNUM ROUTER - page 57
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-13 Adding a WAN IP Route Map Entry To add an entry in the WAN IP Route Map screen, perform the following steps: 1. Click N ew Entry and select the Ethernet 1 port 2. Enter the appropriate private DLCI number, destination network IP address and ...
-
Marathon MAGNUM ROUTER - page 58
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-14 Advanced Routing This function is only available via the WAN-IP Route Map screen. The Advanced Routing section of the Magnum Router Manager allows for additional static routes to be entered. Such routes may include a default route to anothe ...
-
Marathon MAGNUM ROUTER - page 59
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-15 Adding an Advanced Routing Entry To add an entry in the WAN IP Route Map screen, perform the following steps: 1. Click N ew Entry or press ALT-N 2. Enter data in the IP Address, Subnet Mask, and Gateway Address fields 3. Click Sav e Edit or ...
-
Marathon MAGNUM ROUTER - page 60
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-16 RIP Version 1 Routing Enable RIP routing by clicking on the box next to Enable RIP Version 1 Routing . To disable RIP routing, remove the check in the box. The Magnum Router implements the RIP routing protocol in a “hybrid” fashion. It ...
-
Marathon MAGNUM ROUTER - page 61
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-17 Ethernet Config Button Select this button to program IP addresses on the Ethernet port of the Magnum Router. This can be accessed by pressing ALT-E, and is also available as Ethernet Configuration from the Settings menu. This section of the ...
-
Marathon MAGNUM ROUTER - page 62
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-18 Adding an Ethernet IP Entry To add an entry in the Ethernet IP screen, perform the following steps: 1. Click N ew Entry or press ALT-N 2. Enter data in the IP Address and Subnet Mask fields 3. Click Sav e Edit or press ALT-V 4. Click Ex it ...
-
Marathon MAGNUM ROUTER - page 63
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-19 Micro-Band Voice Over IP The MVoIP function of the Magnum Router gives the ability to encapsulate any frame relay data that is supplied on any of the WAN ports into a routable IP packet that can be sent over any IP LAN environment (includin ...
-
Marathon MAGNUM ROUTER - page 64
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-20 MVoIP Requirements The requirements to add an MVoIP entry include an entry in the WAN configuration using a DLCI of 900 thru 989 and an output port of E1; a WAN IP Route Map entry that uses a DLCI from 900 thru 989, and an Ethernet Configur ...
-
Marathon MAGNUM ROUTER - page 65
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-21 DHCP Server The Magnum Router has the ability to act as a lo cal DHCP server in a network environment. It cannot function as an enterprise level DHCP server, pass DHCP traffic across any of its WAN ports, does not support BOOTP processing a ...
-
Marathon MAGNUM ROUTER - page 66
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-22 Programming the Magnum Router as a DHCP server , it will supply to the local IP host device such things as an IP address, WINS addresses (up to 3), DNS addresses (up to 3), Domain Name and default gateway information. Programming the DHCP s ...
-
Marathon MAGNUM ROUTER - page 67
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-23 If all data entered is correct, click on Ex it to close the DHCP screen. If not, correct the data and click on Sav e again. To disable the DHCP server, click on the box next to Enable DHCP Server to remove the check and click on Sav e . Mul ...
-
Marathon MAGNUM ROUTER - page 68
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-24 DHCP IP Scope As with other DHCP servers, the IP scope ( DHCP Range From Address and DHCP Range To Address ) need to be within the same subnet as the host IP address and cannot overlap the host IP address. In the case where there is a DHCP ...
-
Marathon MAGNUM ROUTER - page 69
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-25 DHCP Functions Other buttons on this screen are: Select this button to clear all the fields on the screen. Select this button to see any DHCP leases that have been issued by the Magnum Router ...
-
Marathon MAGNUM ROUTER - page 70
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-26 Save Configuration This option saves the current configuration in the Magnum Router Manager. (See Save Config notes later in this chapter for important information) This can also be accessed by pressing ALT-V, and is also available as Save ...
-
Marathon MAGNUM ROUTER - page 71
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-27 Send Configuration Select this button to send the current configuration in the Magnum Router Manager to the connected Magnum Router. This can also be accessed by pressing ALT-D, and is also available as Send Configuration from the Configura ...
-
Marathon MAGNUM ROUTER - page 72
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-28 It is at this time that the Send Config can be canceled by clicking No and going back to the appropriate section of the Magnum Router M anager and applying any fixes necessary, or this warning can be ignored by pressing Yes . If Y es was se ...
-
Marathon MAGNUM ROUTER - page 73
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-29 Click on the R eboot Router or press ALT-R and the following screen will appear: By clicking Y es , the reboot process will begin. It takes approximately 2 minutes to complete a reboot, and after the reboot is complete, the Magnum Router Ma ...
-
Marathon MAGNUM ROUTER - page 74
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-30 Menu Bar Figure 25 - Main Screen Menu Bar The Menu Bar allows for more detailed access to the Magnum Router GUI Manager commands and functions. Select one of the Menu Bar items by clicking on it, or by pressing it’s shortcut key (shown by ...
-
Marathon MAGNUM ROUTER - page 75
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-31 Remotely Access a Magnum Router This menu item is used to access another Magnum Router within the network. Remotely Access a Magnum Router Select this function to access a remote Magnum Router. It is important to note that remote access is ...
-
Marathon MAGNUM ROUTER - page 76
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-32 If an error occurs during a remote login attempt, the following screen will be displayed: Clicking OK will then re-log the Magnum Router Manager onto the local Magnum Router. Logoff a Remotely Accessed Magnum Router This menu item terminate ...
-
Marathon MAGNUM ROUTER - page 77
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-33 Configuration Menu (ALT-C) Figure 27 - Main Screen Configuration Menu New Configuration File This menu item is the same as clicking on the “New Config” button of the main screen. All settings within the Magnum Router Manager are default ...
-
Marathon MAGNUM ROUTER - page 78
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-34 Saving Configuration Files Saving a configuration is similar to opening a configuration file. After selecting, the following screen will appear: At this time, the configuration file can be saved as the same name as it was loaded, or just ch ...
-
Marathon MAGNUM ROUTER - page 79
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-35 Printing a Configuration Select this option to print or view a copy of the working configuration that is loaded in the Magnum Router Manager. Send Data to the se l e cte d pr i n t e r View the sele cted data on t he s cr een C los e t h is ...
-
Marathon MAGNUM ROUTER - page 80
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-36 Select the fields to print, the printer orientation and the number of copies to print, a report title and select either Print or Preview. Print Preview Is an easy way to see what the configuration looks like before actually making a hard co ...
-
Marathon MAGNUM ROUTER - page 81
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-37 Send Configuration to the Magnum Router This option is the same as clicking on the “Send” button of the main screen. It’s function is to send the configuration that is currently being worked on in the Magnum Router Manager to the Magn ...
-
Marathon MAGNUM ROUTER - page 82
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-38 Remote Magnum Names The Magnum Router Manager gives users the ability to associate a name with an IP address, thus making it an easier task to connect to a remote node, or ping a remote site. Select REMOTE MANGUM NAMES and the following scr ...
-
Marathon MAGNUM ROUTER - page 83
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-39 Changing a Remote Name Entry It is possible to change an entry after it has been entered into the table. Follow these steps to change an entry: 1. Double-Click on the entry that needs modification in the table This will cause all of the ent ...
-
Marathon MAGNUM ROUTER - page 84
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-40 System Menu (ALT-Y) Figure 31 - Main Screen System Menu This menu is concerned with system leve l functions of the Magnum Router. Reboot Router Selecting the Reboot Router menu item is the same as clicking on Reboot Router from the main scr ...
-
Marathon MAGNUM ROUTER - page 85
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-41 The following screen will be displayed: Click Continue to proceed, or click Exit to return to the Magnum Router Main Screen. Clicking on the Continue button will display the following screen: Once the upgrade process has started, it cannot ...
-
Marathon MAGNUM ROUTER - page 86
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-42 As stated in the above screen, the upgrade program needs to use the Microsoft FTP program that is supplied with the Windows operating syst em. If the FTP program on the PC that is running the Magnum Router Manager uses a thir d party FTP cl ...
-
Marathon MAGNUM ROUTER - page 87
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-43 The next step is to inform the Magnum Rout er Manager where to find the update files. Do this by selecting the hard disk and directory where the Update files were de-compressed. The Magnum Router Manager will then verify that the upgrade fi ...
-
Marathon MAGNUM ROUTER - page 88
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-44 After copying the files from the PC to the Magnum Router, the Magnum Router Manager verified that all of the files have been copied correctly. If there is an error, the following will be displayed: If this error appears, click on OK and try ...
-
Marathon MAGNUM ROUTER - page 89
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-45 This display is to let the user know that the file transfer has completed, and the update is proceeding by processing a specific set of commands. Figure 33 - Upgrade Magnum Router, Process Upgrade Commands Screen Once all steps have been co ...
-
Marathon MAGNUM ROUTER - page 90
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-46 Diagnostics The DIAGNOSTIC screen gives a simple set of tools to check connectivity, DLCI status, and IP Routes on a Magnum Router. Below is the overview of the DIAGNOSTIC screen. S how I P R ou tes know n by the Magnum Router List D LCI&ap ...
-
Marathon MAGNUM ROUTER - page 91
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-47 PING The most used test function on a router is the PING command. This command allows for the verification that a specified IP Host device is active. To perform the PING command from the DIAGNOSTICS screen, enter either the IP address of th ...
-
Marathon MAGNUM ROUTER - page 92
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-48 To stop a PING at any time, either click on EXIT or STOP. If STOP is selected, or if the requested number of PING’s has been reached, the following screen will be displayed: Figure 36 - Diagnostics Screen, Ping Completion ...
-
Marathon MAGNUM ROUTER - page 93
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-49 If the IP Host that is being PING’ed does not respond to requests within 10 seconds, the PING command automatically terminates and the following screen is displayed: ...
-
Marathon MAGNUM ROUTER - page 94
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-50 Show IP Routes The Show IP Routes command shows any routes that have been programmed into the Magnum Router. It does not differentiate between static routes or routes that have been dynamically learned. Figure 37 - Diagnostics Screen, Show ...
-
Marathon MAGNUM ROUTER - page 95
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-51 List DLCI’s The List DLCI’s command is used to report the DLCI’s that have been reported on each port. This includes any that have been programmed, and any that have been learned from any other source. This screen just reports the DLC ...
-
Marathon MAGNUM ROUTER - page 96
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-52 Change Access Password In some cases, it may be necessary to change the default access password of a specific Magnum Router. ALTHOUGH IT IS NOT RECOMMENDED , the Magnum Router Manager has the ability to change the default access password to ...
-
Marathon MAGNUM ROUTER - page 97
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-53 Once all fields have been entered, click on Sav e (or press ALT-V) and then click on Ex it (or press ALT-X. The first warning message will be displayed: Selecting Yes will then display a second warning message Selecting Yes again will then ...
-
Marathon MAGNUM ROUTER - page 98
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-54 Statistics Menu (ALT-T) Figure 39 - Main Screen Statistics Menu This menu is used to show the current condition of the Magnum Router. Port status, link information and Magnum Router utilization are just some of the items available for displ ...
-
Marathon MAGNUM ROUTER - page 99
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-55 Display Port Statistics Figure 40 - Port Statistics Screen The Port Statistics screen gives the ability to monitor port status and see how each port is transferring data. Next to each port is a drop-down box that can also give the added abi ...
-
Marathon MAGNUM ROUTER - page 100
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-56 Clearing the Statistics Counter Click on the C lear Counters (or press ALT-C) to perform a clearing of the counters. This action ONLY clear counters on the WAN ports of the Magnum Router, not the Ethernet port. Display Detailed Port Informa ...
-
Marathon MAGNUM ROUTER - page 101
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-57 DLCI State Information As seen in the above screen, the Detailed Port Information screen reports DLCI’s that have been either programmed or reported on the port specified in the Port dropdown box. The possible states for a DLCI are: Confi ...
-
Marathon MAGNUM ROUTER - page 102
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-58 Display Magnum Utilization The Display Magnum Utilization screen gives the ability to show the Magnum Router status in both a text and graphical format. It also has the ability to capture the sampled data to a file (in a comma separated for ...
-
Marathon MAGNUM ROUTER - page 103
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-59 As can be seen in the previous screen shot, this is a very comprehensive data display that requires some time to actually load and compare all data received. In some cases, it may take several seconds when this function is actually selected ...
-
Marathon MAGNUM ROUTER - page 104
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-60 The captured data is saved in a comma-separated format (.CSV) that can easily be imported into another application such as Excel. Using the captured data, it would then be easy to plot such thing as bandwidth usage over a given amount of ti ...
-
Marathon MAGNUM ROUTER - page 105
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-61 Chart Section Overview As stated earlier, there are 2 different types of charts allowed in this display; BAR and LINE. The difference between them is the data that can be displayed. In the case of the BAR chart, all data in the text section ...
-
Marathon MAGNUM ROUTER - page 106
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-62 Data Selection Port Ba nd width Port Utiliza tio n Estimate d Ba nd width in use Rece iv e d By te s R ec eived F ram es Transmitte d By te s T r ans mit t ed F r ames Figure 49 - Magnum Utilization Data Selection Bar Selecting which data t ...
-
Marathon MAGNUM ROUTER - page 107
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-63 Line Chart The LINE chart can show only one column of data for all selected ports. To change the data being displayed on the chart, click on another data column heading. The previous data column will de-select itself and the new selection w ...
-
Marathon MAGNUM ROUTER - page 108
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-64 Port Status Strobe The Port Status Strobe is a convenient way to see each WAN port’s status from the Main screen. It automatically updates every 60 seconds (non changeable) and can supply snapshot information regarding the port status. Wh ...
-
Marathon MAGNUM ROUTER - page 109
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-65 Figure 54 - Port Status Strobe Snapshot Screen Help Menu Item (ALT-H) Selecting this item shows the Magnum Rout er Manager version and miscellaneous information that could be helpful in diagnosing problems. Exit Menu Item (ALT-X) Selecting ...
-
Marathon MAGNUM ROUTER - page 110
Chapter 7: Magnum Router GUI Manager ___________________________________________________________________ 7-66 ...
-
Marathon MAGNUM ROUTER - page 111
Chapter 8: Magnum Router Specialized Functions ___________________________________________________________________ 8-1 Chapter 8: Magnum Router Specialized Functions This chapter covers the specialized functions of the Magnum Router. These functions include Virtual Routing of DLCI’s, MVoIP (Micro-Band Voice Over IP) and Hybrid RIP routing. In the ...
-
Marathon MAGNUM ROUTER - page 112
Chapter 8: Magnum Router Specialized Functions ___________________________________________________________________ 8-2 For Example: Below is a simple diagram that could represent one application that would use a virtual DLCI. Pu b l ic F ram e Rela y M agnum R out er M 1 M agnum R out er M 1 M agnum R out er E1 Magnum R out er E1 M agnum R out er W ...
-
Marathon MAGNUM ROUTER - page 113
Chapter 8: Magnum Router Specialized Functions ___________________________________________________________________ 8-3 The WAN configuration screen would look like this: What has been accomplished in this example is that the PUBLIC DLCI of 100 now has the capability of sending data from the M1 (Marathon) port and the E1 (Ethernet) port to the remot ...
-
Marathon MAGNUM ROUTER - page 114
Chapter 8: Magnum Router Specialized Functions ___________________________________________________________________ 8-4 This utilizes the frame switching capabilities of t he Magnum Router by directing traffic from the PUBLIC DLCI of 100 to the PRIVATE DLCI of 105 and vice versa. Micro-Band Voice Over IP Micro band Voice over IP is the Magnum Router ...
-
Marathon MAGNUM ROUTER - page 115
Chapter 8: Magnum Router Specialized Functions ___________________________________________________________________ 8-5 There is an MVoIP sample in chapter 9 that will assist in clarifying the programming requirements and steps. RIP Routing RIP (Routing Information Protocol) is implem ented on the Magnum Router using a “hybrid” approach. Where m ...
-
Marathon MAGNUM ROUTER - page 116
Chapter 9: Sample Configurations ___________________________________________________________________ 9-1 Chapter 9: Sample Configurations This chapter describes sample configurations available as files on the Magnum Router Manager CD distributed with the Magnum Router Module. The configurations are some of the most common and useful applications fo ...
-
Marathon MAGNUM ROUTER - page 117
Chapter 9: Sample Configurations ___________________________________________________________________ 9-2 Sample 1 - Dedicated Point to Point Network WA N IP A ddress : 192.168.1.2/24 WA N IP A ddress : 192.168.1.1/24 IP Address: 10.1.100.250/24 CSU/DSU Mag num/Ma rat ho n A Ethern et port Network: 10.1.100.0/ 24 CSU/DSU Mag num/Ma rat ho n B Ethern ...
-
Marathon MAGNUM ROUTER - page 118
Chapter 9: Sample Configurations ___________________________________________________________________ 9-3 Below are several screen shots of the Magnum-A and Magnum-B’s configuration. M1 Port Settings for both Magnum A and Magnum B Here, the M1 port is configured to act as a Frame Relay NETWORK port (FR_Dedicated), but to also act as a synchronizin ...
-
Marathon MAGNUM ROUTER - page 119
Chapter 9: Sample Configurations ___________________________________________________________________ 9-4 WAN1 Port Settings for Magnum A Notice that the WAN1 port is set for DTE and the Link Type is set for DEDICATED_MASTER. As described above, this is the Frame Relay NETWORK port side. Also note that the Baud Rate box that was present for the M1 p ...
-
Marathon MAGNUM ROUTER - page 120
Chapter 9: Sample Configurations ___________________________________________________________________ 9-5 WAN1 Port Settings for Magnum B Notice that the WAN1 port is set for DTE and the Link Type is set for DEDICATED_SLAVE. As described above, this is the Frame Relay USER port side. ...
-
Marathon MAGNUM ROUTER - page 121
Chapter 9: Sample Configurations ___________________________________________________________________ 9-6 WAN Configuration for Magnum A and Magnum B In the above diagram, the main connection between the two sites is a standard DDS line supplied by a carrier. The speed of this li ne can be anywhere from 9.6k through 2.048m. However this line only su ...
-
Marathon MAGNUM ROUTER - page 122
Chapter 9: Sample Configurations ___________________________________________________________________ 9-7 Master WAN IP Address for Magnum A The following table shows the Master WAN IP Address screen for Magnum A. Master WAN IP Address for Magnum B The following table shows the Master WAN IP Address screen for Magnum B. ...
-
Marathon MAGNUM ROUTER - page 123
Chapter 9: Sample Configurations ___________________________________________________________________ 9-8 Just like any brand-x router, in order to route IP traffic, there must be an IP address on the WAN port. WAN-IP Route Map Here, the actual routing commands are created to allow Ethernet traffic to flow from Magnum-A to Magnum-B. See Chapter 7 fo ...
-
Marathon MAGNUM ROUTER - page 124
Chapter 9: Sample Configurations ___________________________________________________________________ 9-9 Ethernet Configuration The following window illustrates the Ethernet Configuration associated with this sample configuration. Ethernet Configuration for Magnum-A Ethernet Configuration for Magnum-B ...
-
Marathon MAGNUM ROUTER - page 125
Chapter 9: Sample Configurations ___________________________________________________________________ 9-10 Sample 2 - Point to Point Public Frame Relay Network IP Address: 192.168.1.2/24 IP Address: 192.168.1.1/24 IP Address: 10.1.100.250/24 CSU/DSU Mag num/Ma rat ho n A Ethern et port Network: 10.1.100.0/ 24 CSU/DSU Mag num/Ma rat ho n B Ethernet p ...
-
Marathon MAGNUM ROUTER - page 126
Chapter 9: Sample Configurations ___________________________________________________________________ 9-11 M1 and WAN1 settings on Magnum-A and Magnum-B In this sample, the port settings of Magnum-A and Magnum-B are identical. ...
-
Marathon MAGNUM ROUTER - page 127
Chapter 9: Sample Configurations ___________________________________________________________________ 9-12 WAN Configuration In the diagram for this example, Magnum-A is bei ng supplied with a DLCI of 16 from the carrier, and Magnum-B is being supplied with a DLCI of 17. Once again, a Virtual DLCI is being utilized to split one DLCI into 2 DLCI’s. ...
-
Marathon MAGNUM ROUTER - page 128
Chapter 9: Sample Configurations ___________________________________________________________________ 9-13 Master WAN IP Address As in the previous sample, and IP address needs to be assigned to the WAN port for IP routing to function across the Frame Relay network. Magnum-A’s WAN IP Address Magnum-B’s WAN IP Address ...
-
Marathon MAGNUM ROUTER - page 129
Chapter 9: Sample Configurations ___________________________________________________________________ 9-14 WAN IP Route Map Table Magnum-A’s WAN IP Route Map Magnum-B’s WAN IP Route Map ...
-
Marathon MAGNUM ROUTER - page 130
Chapter 9: Sample Configurations ___________________________________________________________________ 9-15 Ethernet Configuration Magnum-A’s Ethernet IP Address Magnum-B’s Ethernet IP Address ...
-
Marathon MAGNUM ROUTER - page 131
Chapter 9: Sample Configurations ___________________________________________________________________ 9-16 Sample 3 - Multi-Point Public Frame-Relay Network IP Address: 192.168.1.2/24 IP Address: 192.168.1.1/24 IP Address: 10.1.100.250/24 CSU/DSU Mag num/Ma rat ho n A Ethern et port Network: 10.1.100.0/ 24 CSU/DSU Mag num/Ma rat ho n B Ethernet port ...
-
Marathon MAGNUM ROUTER - page 132
Chapter 9: Sample Configurations ___________________________________________________________________ 9-17 Port Settings Once again, the carrier is supplying all clocking and Frame Relay information, so the WAN1 port on all 3 Magnum Routers will be programmed to be Frame Relay USER ports (FR_Public). Further, the M1 port will be supplying clocking a ...
-
Marathon MAGNUM ROUTER - page 133
Chapter 9: Sample Configurations ___________________________________________________________________ 9-18 WAN Configuration As noted earlier, this configuration utilizes multiple Virtual DLCI’s. Notice that the PUBLIC DLCI’s (17 and 18) are assigned to 4 different PRIVATE DLCI’s. Magnum-A WAN Configuration Magnum-B WAN Configuration ...
-
Marathon MAGNUM ROUTER - page 134
Chapter 9: Sample Configurations ___________________________________________________________________ 9-19 Magnum C Master WAN IP Address The following table shows the Master WAN IP Address. Magnum A – using two sub-interfaces ...
-
Marathon MAGNUM ROUTER - page 135
Chapter 9: Sample Configurations ___________________________________________________________________ 9-20 Magnum B Magnum C ...
-
Marathon MAGNUM ROUTER - page 136
Chapter 9: Sample Configurations ___________________________________________________________________ 9-21 WAN-IP Route Map Table The following table shows the WAN-IP Route Map Table Configuration associated with this sample configuration. See chapter 7 for detailed information on using the Magnum Router Manager to change data in the DLCI-IP Map Tab ...
-
Marathon MAGNUM ROUTER - page 137
Chapter 9: Sample Configurations ___________________________________________________________________ 9-22 Magnum C Ethernet Configuration The following window illustrates the Ethernet Configuration associated with this sample configuration. Magnum A ...
-
Marathon MAGNUM ROUTER - page 138
Chapter 9: Sample Configurations ___________________________________________________________________ 9-23 Magnum B Magnum C ...
-
Marathon MAGNUM ROUTER - page 139
Chapter 9: Sample Configurations ___________________________________________________________________ 9-24 Sample 4 - MicroBand VoIP E1 IP Address: 10.1.100 .250/24 M VoIP Source IP Address: 10.1.100.251/24 Magnum/Ma r at hon A Ethernet port Ne tw o rk: 1 0.1 .10 0.0 /2 4 Magnum/Ma r at hon B Ethernet port Network: 172.16. 1.0/ 24 Carrier Cl ass I P ...
-
Marathon MAGNUM ROUTER - page 140
Chapter 9: Sample Configurations ___________________________________________________________________ 9-25 Port Settings Port settings for all ports in the Microband VoIP sample are the same on both Magnum A and Magnum B. Ports WAN1-WAN3 are set for disabled. WAN Configuration The following table shows the WAN Configuration associated with this samp ...
-
Marathon MAGNUM ROUTER - page 141
Chapter 9: Sample Configurations ___________________________________________________________________ 9-26 When DLCI’s within the range of 900 through 989 are specified in the Magnum Router, referencing an output port of E1, the Magnum Rout er will automatically encapsulate any traffic on the referenced input port (such as M1). However, if any of ...
-
Marathon MAGNUM ROUTER - page 142
Chapter 9: Sample Configurations ___________________________________________________________________ 9-27 Magnum B The Gateway is the local router or firewall that will carry the network traffic across the WAN or Internet. See chapter 7 for detailed information on using the Magnum Router Manager to change data in the DLCI-IP Map Table. Advanced Rou ...
-
Marathon MAGNUM ROUTER - page 143
Chapter 9: Sample Configurations ___________________________________________________________________ 9-28 Ethernet Configuration The following window illustrates the Ethernet Configuration associated with this sample configuration. Magnum A Magnum B ...
-
Marathon MAGNUM ROUTER - page 144
Chapter 9: Sample Configurations ___________________________________________________________________ 9-29 Microband VoIP Configuration In order to successfully configure MVoIP, you will need two IP addresses on the same subnet: one is for the Ethernet (E1) interface and one is for MVoIP driver (also referred to as the “source” address). In this ...
-
Marathon MAGNUM ROUTER - page 145
Chapter 9: Sample Configurations ___________________________________________________________________ 9-30 Magnum B The destination IP is the Ethernet Interface of the target Magnum/Marathon unit on the other end of the network. (Please refer to the Microband VoIP diagram at the beginning of this example) See Chapter 7 for detailed information on us ...
-
Marathon MAGNUM ROUTER - page 146
Chapter 9: Sample Configurations ___________________________________________________________________ 9-31 Sample 5 – RIP Routing Point to Point Network IP Address: 192.168.1. 2/24 IP Address: 192.168.1. 1/24 IP Address: 10.1.100.250/ 24 CSU/DSU Magn um /Marath on A Ethernet port Network: 10.1.100. 0/24 CSU/DSU Magn um /Marath on B Ethernet port N ...
-
Marathon MAGNUM ROUTER - page 147
Chapter 9: Sample Configurations ___________________________________________________________________ 9-32 The only additional information needed is to program the route for the remote network into Magnum B’s WAN IP Route Map table as shown below: On Magnum A, RIP routing needs to be enabled. To do this, click on the WAN Config button, then select ...
-
Marathon MAGNUM ROUTER - page 148
Chapter 9: Sample Configurations ___________________________________________________________________ 9-33 Sample 6 – DHCP Server IP Address: 10.1.100.250/24 Magn um /M arath on A Ethernet port Netw ork: 10. 1.100. 0/24 PC PC PC Laser printer The above diagram shows an example of how t he Magnum Router can operate as a local DHCP server. It cannot ...
-
Marathon MAGNUM ROUTER - page 149
Chapter 9: Sample Configurations ___________________________________________________________________ 9-34 Below is an example of the Ethernet Configuration screen for the above diagram. Click on the entry in the table of the Ethernet Configuration screen, highlighting the entry for 10.1.100.250 by clicking once on it and then click on the DH CP but ...
-
Marathon MAGNUM ROUTER - page 150
Chapter 10: Magnum Router Troubleshooting ___________________________________________________________________ 10-1 Chapter 10: Magnum Router T roubleshooting LED Display Indicators The LED display indicators are found on the front of the module and are viewable from the front side of the Marathon base unit chassis. The LED messages are displayed in ...
-
Marathon MAGNUM ROUTER - page 151
Chapter 10: Magnum Router Troubleshooting ___________________________________________________________________ 10-2 Magnum Router Hardware Problems Magnum Router Power-up Self Test Problems Symptom: No red OK LED Indicator Solution: Magnum Router Module is not seated properly in Marathon base unit. Power off Marathon base unit and check for proper i ...
-
Marathon MAGNUM ROUTER - page 152
Chapter 10: Magnum Router Troubleshooting ___________________________________________________________________ 10-3 Symptom: M1 to Marathon Base Unit A1 link is not active. Solution: • Marathon A1 port defective, or Magnum Router Module port defective. • Check configuration of the M1 port (it should remain at the factory default settings as seen ...
-
Marathon MAGNUM ROUTER - page 153
Chapter 10: Magnum Router Troubleshooting ___________________________________________________________________ 10-4 Telnet Login Problems Symptom: Cannot access the Magnum Router using a Telnet Login Method. Solution: Verify that the PC is able to PING the IP address of the Magnum Router. ...
-
Marathon MAGNUM ROUTER - page 154
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-1 Chapter 11: Magnum Router Cable Specifications DB-25 Conne ctor (Mal e) DB-25 Conne ctor (Fem ale) M5000C/M1-A 1 (15") 3 16 2 14 8 3 14 2 6 20 11 20 6 5 4 16 8 7 15 12 9 17 4 7 18 21 23 24 Re cei v e Da ta A (RD A) 1 1 Re cei ...
-
Marathon MAGNUM ROUTER - page 155
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-2 DB-25 Conne ctor (Mal e) DB-25 Conne ctor (Fem ale) M5000C/M1-A 1V35 (18") 3 4 2 1 8 3 14 2 6 20 11 20 6 5 4 16 8 7 12 15 17 9 13 7 18 19 24 23 Re cei v e Da ta A (RD A) Re cei v e Da ta B (RD B) Sen d Da ta A (SD A) Sen d Da ...
-
Marathon MAGNUM ROUTER - page 156
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-3 Magnum Router V.35(DB25) Femal e W AN Port Pins V.35 Ma le In terface Pins M5000C/W123 R P Shield F B E D C H V T S Y AA X Magnum Router CSU/DSU Sheild Tr ansmit Data A (T XD A) Re cei v e Da ta A (RX D A) Reque st T o Se nd (RTS) ...
-
Marathon MAGNUM ROUTER - page 157
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-4 Female DB25 Female V.35 M5000C/FRAD P R C B E D F V T Y S AA X H Tr ansmit Data A (T D A) Re cei v e Da ta A (RD A) Reque st T o Se nd (RTS) Cle a r To Se nd (CTS) Data Se t Re ad y (DSR) Ground Da ta Ca rri e r De te c t (DCD) Se ...
-
Marathon MAGNUM ROUTER - page 158
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-5 Female DB9 Male DB25 M5000C/CP 1 2 3 4 5 8 7 6 9 8 3 2 20 7 5 4 6 22 For use between user P C and Magnum Router console port. Da ta Ca rri e r De t e ct Reque st T o Se nd Data Se t Re a d y Gr o und D at a T erm in al R ead y Tr ...
-
Marathon MAGNUM ROUTER - page 159
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-6 Mal e DB25 M5000C/MODEM Mal e DB25 To Magnum Consol e Port To Di al Modem Gr ound (GND ) Tr a nsmit Da ta (TD) Re ce iv e Dat a (RD) Reque st T o Se nd (RT S ) C l ear T o S en d ( C T S) Da ta Se t Re a dy (DSR) Ca rrie r Dete c ...
-
Marathon MAGNUM ROUTER - page 160
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-7 Male DB25 M5000C/MA TRIX Male DB25 To Magnum Consol e Port To Di al Modem Gr ound (GND ) Tr a nsmit Da ta (TD) Re ce iv e Dat a (RD) Reque st T o Se nd (RT S ) C l ear T o S en d ( C T S) Da ta Se t Re a dy (DSR) Ca rrie r Dete c ...
-
Marathon MAGNUM ROUTER - page 161
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-8 RJ45 Connect or RJ45 Connect or M5000C/CA T5E 10' 1 2 3 4 5 3 2 1 8 7 6 8 7 6 5 4 Rece iv e + Rece iv e - Tr ans m i t + Tr ans m i t - Tr ans m i t + Tr ans m i t - Rece iv e + Rece iv e - To LAN hub or switc h To M agnum Ro ...
-
Marathon MAGNUM ROUTER - page 162
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-9 M5000C/LOC A L DB-25 Fem ale 3 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 3 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 DB-25 Fem ale Used for connecting Magnum W AN Ports together ...
-
Marathon MAGNUM ROUTER - page 163
Chapter 11: Magnum Router Cable Specifications ___________________________________________________________________ 11-10 ...
-
Marathon MAGNUM ROUTER - page 164
Chapter 12: Marathon Port Configuration ___________________________________________________________________ 12-1 Chapter 12: Marathon Port Configuration Frame Relay Port Configuration Example NOTE: Bolded text items are fields that either need to be changed or are recommended that they be changed. PORT CONFIGURATION [FRAME RELAY LINK]: 1. ASYNC 2. ...
-
Marathon MAGNUM ROUTER - page 165
Chapter 12: Marathon Port Configuration ___________________________________________________________________ 12-2 Async Channel Configuration Example NOTE: Bolded text items are fields that need to be changed in order for Marathon Matrix switching to work. ASYNC CHANNEL CHARACTERISTICS [TOP/ A04] 1. DATA RATE [9600] 2. CODE LEVEL [8] 3. PARITY [NONE ...
-
Marathon MAGNUM ROUTER - page 166
Chapter 13: Configuration Worksheets ___________________________________________________________________ 13-1 Chapter 13: Configuration W orksheets Make copies of the worksheets on these pages, and use them to plan your configuration. Once you’ve determined the configuration and completed the worksheets, use the Magnum Router Manager to enter the ...
-
Marathon MAGNUM ROUTER - page 167
Chapter 13: Configuration Worksheets ___________________________________________________________________ 13-2 Magnum Router C onfigurat ion Sheet Sec tion 1 : Por t Conf igura tion Port DT E M1 WAN1 WAN2 WAN3 DCE DIS Link Type Link Ma na gem ent Baud Rate Note s Sec tion 2 : WA N Configur at ion Input Port Output Port Private DLCI Public DLCI CI R ...
-
Marathon MAGNUM ROUTER - page 168
Chapter 13: Configuration Worksheets ___________________________________________________________________ 13-3 Magnum Router Configuration Sheet Secti on 5: Advanced Rou ti ng Secti on 6: Eth ernet Co nf igu rati on Ne twork A ddr ess 1 Subnet Mas k Notes 2 3 4 5 Secti on 7: MVo IP 1 2 3 4 5 DLCI Source A ddre ss Desti nati on Address Notes Magnum N ...
-
Marathon MAGNUM ROUTER - page 169
Chapter 13: Configuration Worksheets ___________________________________________________________________ 13-4 Magnum Router Conf iguration Sheet Sectio n 8: DHCP Mag num N am e: Date: Page: Notes Enabled ? Ether net IP A ddres s DHCP Rang e Start DHCP Rang e En d Default Lease Time Maxi mu m Lease T ime Domai n Name DNS IP Address #1 DNS IP Address ...
-
Marathon MAGNUM ROUTER - page 170
List of figures ___________________________________________________________________ i List of Figures Figure 1 - Setup Pre-Installation Screen .................................................................................... 5-1 Figure 2 - Setup Confirmation Screen ................................................................................. ...
-
Marathon MAGNUM ROUTER - page 171
List of figures ___________________________________________________________________ ii Figure 50 - Magnum Utilization Bar Chart Screen ................................................................... 7-62 Figure 51 - Magnum Utilization Line Chart Screen .................................................................. 7-63 Figure 52 - Port Stat ...
У вас вопрос, касающийся Marathon MAGNUM ROUTER?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Marathon MAGNUM ROUTER, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Marathon MAGNUM ROUTER со всей вероятностью он захочет поделиться методом ее решения.