-
Mach Speed Technologies T4300HD - page 1
T4300HD Instruction Manual Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If any problems occur during while using your Trio, please feel free to contact Mach Speed technical support at 580-272-0035, or sending an email to mssu ...
-
Mach Speed Technologies T4300HD - page 2
Information in the manual is subject to change without notice and is subject to copyright protection. Copying or otherwise reproducing this material without prior written consent is prohibited. Due to Firmware changes, some of the pictures and functions described in this manual may not be the same as are included with your pla y er. Note: ●The pl ...
-
Mach Speed Technologies T4300HD - page 3
Caution • Do not use the player in exceptionally cold or hot, dusty, damp or dry environments. • Do not drop, strike, or throw your player. Physical damage to y our pl ayer will void ALL warranties. • Please charge your battery when: o Battery power icon shows an empty icon; o The system automatically shuts down and the power is soon off when ...
-
Mach Speed Technologies T4300HD - page 4
To power the player off, slide the power switch to the do wn position and hold it there for 5 seconds or until the Trio Logo is displayed. Once the device has powered off, slide the power switch to the up position until it locks i n place. Please note that if you simply slide the switch to the up position to power off, the player will not save any ...
-
Mach Speed Technologies T4300HD - page 5
We recommend charging the player for 8 hours for the initial two charges. Subsequent charges should only take 3-5 hours. Inserting and removing t he Micro SD card Inserting: Ensure that the pla y er is po wered off, and disconnected from the computer. Hold the Micro SD card face up (side with words aligned in the opposite direction of the display s ...
-
Mach Speed Technologies T4300HD - page 6
2. Once you have named your MP3 player, select Finish, and your Windows Media Player will open to the Sync tab. 3. Drag your music to the sync list (on the right of the screen) from the list on the left. Once you have selected the m usic you wish to add to the pla y er, press Start Sync. ...
-
Mach Speed Technologies T4300HD - page 7
4. Windows Media player will load the songs on to your player. 5. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device. ...
-
Mach Speed Technologies T4300HD - page 8
COPY AND PAS TE Note- This alternate method is used to load v ideos, pictures, and ebook files as well as audio files 1. Connect the MP3 pla y er to a working USB port. 2. When the unit is connected to your computer , it will create a g ray and green icon in the system tra y (lower right hand corner of your desktop). The icon will be called safely ...
-
Mach Speed Technologies T4300HD - page 9
4. Locate the drive created by the unit, generall y ju st called Remo vable Disk, with a letter i n Parenthesis. Drive letters var y depending on your system configuration. 5. Open the drive by either double left clicking on the drive itself, or b y right clicking to open the option menu then left click on the de sired drive. 6. Locate the music st ...
-
Mach Speed Technologies T4300HD - page 10
8. Repeat step 7 for as many songs as you want to cop y on to the unit. NOTE: MAC Computers When connected to your MAC computer, the device will act as a removable drive. Simply drag your files to the device. Main Menu The main menu of the player lets you access the other m odes of the player. On the default screen you will have Video, Music, eBook ...
-
Mach Speed Technologies T4300HD - page 11
Search In addition, you are able to enter the search feature by tapping the Search Bar in the upper right hand corner of the desktop. Below the search bar is the Time and a button which will allow y ou to select what you are searching for. MU is music, VID is video, IMA is images, TXT is text files, ALL is to search for anything. In the search wind ...
-
Mach Speed Technologies T4300HD - page 12
Volume - This icon ma y be w hite or blue, and will display a num ber after the speaker icon. Tapping this icon will bring up a slider which allows you to adjust your volume. Battery - This icon will display how full the battery is. Purple is good! Back - this is the Back icon used in many system settings m odes, and will be located in the upper ri ...
-
Mach Speed Technologies T4300HD - page 13
Only 6 videos are displayed on the screen at once, if you have mo re loaded on the player, touch the screen and slide your finger up to scroll the list. To begin playing a file, simply tap that file. Button Explanation Display Mode - This player has a 16:9 screen ratio, and if y our video file is the same ratio, pressing this icon will do nothing. ...
-
Mach Speed Technologies T4300HD - page 14
Previous - Tapping this icon will skip to the previous track, and if you press y our finger there and hold it, the current video will rewind. Play/Pause - Tapping this icon will alternate between play ing and pausing the file. If you pause a file, and then return to the main menu, or press the back button, the player will remem ber y our place in t ...
-
Mach Speed Technologies T4300HD - page 15
Caption - Selecting this option will enable or disable captions or subtitles for the current video file. If you do not have a subtitle file for the video y ou are watching, this option will be faded out and unselectable. Caption files m ust be in SRT format, must be named identically to the video file (aside from the extension), and loaded in the s ...
-
Mach Speed Technologies T4300HD - page 16
• Note- this player will playback files which are in MP3, W MA (non encrypted), APE, and FLAC formats. If your audio fil es are not in one of these formats, the files will not play. W hen you enter Music Mode, you will be presented with a m usic selection screen, which will allow you to select audio files. Only 6 files are display ed on the scree ...
-
Mach Speed Technologies T4300HD - page 17
Play List - You may have noticed while searching for music, that each audio file has a “Plus Sign” to the right o f it. If y ou tap this “Plus Sign” it will add that particular song to your Playlist. W hen y o u select this icon, it will display all files loaded in your Playlist. Tap a file to begin playing that file. When in the playlist s ...
-
Mach Speed Technologies T4300HD - page 18
Once you have entered the Music Playback mode, your file should begin pla y ing automatically. This screen will display a visualizer, equalizer m ode, bitrate, repeat mode, file name, artist, album, and l y rics (if available). If you have Album art properly loaded, the CD image in the upper right hand corner will change to that album art. EQ - Tap ...
-
Mach Speed Technologies T4300HD - page 19
A - B - This icon controls you’re a-B Repeat Function. While a file is playing, tap this icon to set an A point. Allow the file to proceed and tap the icon again. This will set your B point. At this point, the file will play from points A to B over and over again. Tap this icon a third time to exit A-B Mode. Music Playback Submenu The Music Playb ...
-
Mach Speed Technologies T4300HD - page 20
eBook Mode The eBook mode allows you to view your text, lyric and caption files. Y ou can even listen to your music while reading. • Please note that eBook mode will only access files in TXT, LRC or SRT formats. If your files are not in one of these formats, the y will not be recognized. When you enter eBook Mode, you will be presented with a fil ...
-
Mach Speed Technologies T4300HD - page 21
Page Jump - Tapping this icon will allow you to jump to a specific page in the file. Set a page number from 00001 to 99999 and select yes to jump to that page. Please note that that if you set the number higher than the number of pages that your file actually contains, it will simply jump to the last page of the file. eBook Submenu The eBook Submen ...
-
Mach Speed Technologies T4300HD - page 22
Tap a thumbnail to begin displaying your images. W hen viewing an image, the image will adjust automatically for optimum di splay . To move to the next or previous file, touch the middle of the screen and slide your finger to the left or to the right. Rotate Right - this will rotate the current image 90 degrees clockwise. The image will automatical ...
-
Mach Speed Technologies T4300HD - page 23
Start Slideshow - Tapping this icon will begin display ing y our images as a slideshow. The slideshow timer is set in the Photo Submenu, explained below. Tapping this icon again will stop the slideshow. Optimize Display - Tapping this icon will restore your im age to optimum display. This is generally used after zooming in on an image. Zoom in - Al ...
-
Mach Speed Technologies T4300HD - page 24
The recording screen will display the name of the file being recorded (VREC001.WAV in the example above) as well as the length of the current recording and the maximum amount of recording time left. Begin Recording - Tap this icon to begin recording. The status above will change from “Ready” to “Recording” and the record counter will start ...
-
Mach Speed Technologies T4300HD - page 25
Search Control - Tapping this allows you to toggle betw een search controls and scan for stations. A uto Scan - Automatically scans the available station s and saves any with a strong signal as a preset. This will override any presets you have manually saved. Manual Search - Selecting this will increase or decrease the signal by 0.1MHz when ...
-
Mach Speed Technologies T4300HD - page 26
Begin Recording - This icon is located in the upper right hand corner of the screen, by the volume and time . When y ou tap this icon, it will immediately enter recording mode and begin recording the FM station you are currently receiving. W hen in this mode, follow the instructions listed in Recording mode. Explorer The Explorer mode allows you to ...
-
Mach Speed Technologies T4300HD - page 27
Tap the or icons to swap between months and the Icon to return to the current date. Your Date and tim e is set using the System Time option in the Settings . Time Zone The Time Zone option lists the current time (based on the time you have set in the player) of a number of prominent cities throughout the world. ...
-
Mach Speed Technologies T4300HD - page 28
Tapping the or icons will swap between different cities and tap the city name to bring up a list of cities which will allow you to select one directly . If there is one city you check regularly, tap the icon to set the current city as your default. Stopw atch You can use the player as a stopwatch to time yourself of y our frie nds. Begin - Tap this ...
-
Mach Speed Technologies T4300HD - page 29
Calculator This player comes equipped with a standard calculator. Tap the icons on the screen to perform your calculations. System Settings The system settings menu allows you to adjust m ost facets of y our play er. Whether the desktop picture, screen brightness, s y stem tim e, or power savings settings, it’s all found here. ...
-
Mach Speed Technologies T4300HD - page 30
Remember that in order to save an y settings changes y ou m ake, w hen y ou power off, do so by sliding the power switch to the down position for 5 seconds. Display Settings - Adjust your displa y settings, including brightness, and the light time. • Light Time- If you are not viewing pictures or watching a video, and do not touch the screen, the ...
-
Mach Speed Technologies T4300HD - page 31
A uto Shut Time You can set this option to power the player off when the pla y er i s idle (no music playing, not watching a video, etc) in order to conserve batter y life. TV Out Setting This is the settings change for the HDMI output on the pla y er. • TV switch- Allows you to manually change your displa y to HDMI or back to the player’s scre ...
У вас вопрос, касающийся Mach Speed Technologies T4300HD?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Mach Speed Technologies T4300HD, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Mach Speed Technologies T4300HD со всей вероятностью он захочет поделиться методом ее решения.