Русский dropdown-ico

Инструкция обслуживания ADC Soneplex Broadband System

342 страниц 3.53 mb
Скачать

Перейти на страницу of 342

Summary
  • ADC Soneplex Broadband System - page 1

    Soneplex ® Broadband System Operation and Maintenance Manual (V5.3) ADCP-61-471 Issue 4 June 2000 1037961 Rev A ...

  • ADC Soneplex Broadband System - page 2

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page ii COPYRIGHT  2000, ADC Telecommunications, Inc. All Rights Reserved Printed in the U.S.A. REVISION HISTORY ISSUE DATE REASON FOR CHANGE 1st Edition, Issue 1 10/1995 Original. 1st Edition, Issue 2 03/1996 Added Version 5.1 software update and corrected typographical errors. 1st Edition, Issu ...

  • ADC Soneplex Broadband System - page 3

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page iii  2000, ADC Telecommunications, Inc. LIST OF CHANGES The technical changes incorporated into this issue are listed below. SECTION IDENTIFIER DESCRIPTION OF CHANGE — Cover/Title page Removed list of contents. FM Related Publications Added new publications. FM List of Acronyms Added new a ...

  • ADC Soneplex Broadband System - page 4

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page iv  2000, ADC Telecommunications, Inc. ...

  • ADC Soneplex Broadband System - page 5

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page v  2000, ADC Telecommunications, Inc. TABLE OF CONTENTS Content Page FRONT MATTER ABOUT THIS MANUAL ...................................................................... ix RELATED PUBLICATIONS .................................................................... ix ADMONISHMENTS ........... ...

  • ADC Soneplex Broadband System - page 6

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page vi  2000, ADC Telecommunications, Inc. TABLE OF CONTENTS Content Page SECTION 2 OPERATION AND MAINTENANCE (continued) ALARMS PROCEDURES .............................................................. NTP-006 APU INSTALLATION AND TESTING ....................................................... ...

  • ADC Soneplex Broadband System - page 7

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page vii  2000, ADC Telecommunications, Inc. TABLE OF CONTENTS Content Page SECTION 2 OPERATION AND MAINTENANCE (continued) LOOPBACK PROCESS DESCRIPTION ..................................................... TAD-102 LOOPBACK STATUS/COMMANDS ....................................................... D ...

  • ADC Soneplex Broadband System - page 8

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page viii  2000, ADC Telecommunications, Inc. TABLE OF CONTENTS Content Page SECTION 2 OPERATION AND MAINTENANCE (continued) SHELF STATUS DISPLAY ............................................................. DLP-545 SPECIFICATIONS .................................................................. ...

  • ADC Soneplex Broadband System - page 9

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page ix  2000, ADC Telecommunications, Inc. ABOUT THIS MANUAL This manual describes how to operate and maintain the ADC Soneplex Broadband system (V5), which is a D S1-based multiplexer with an interface that is compatible with DS3 networks. It is specifically designed for use as a hub to distrib ...

  • ADC Soneplex Broadband System - page 10

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page x  2000, ADC Telecommunications, Inc. ADMONISHMENTS Important safety admonishments are used throughout this manual to warn of possible hazards to persons or equipment. An admonishment identifies a possible hazard and then explains what may happen if the hazard is not avoided. The admonishmen ...

  • ADC Soneplex Broadband System - page 11

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page xi  2000, ADC Telecommunications, Inc. FCC COMPLIANCE STATEMENT Class A The Soneplex Broadband system has been certified to comply with the requirements for class A computing devices per part 15 of the FCC regulations. Warning : This equipment generates, uses, and can radiate radio frequency ...

  • ADC Soneplex Broadband System - page 12

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page xii  2000, ADC Telecommunications, Inc. TA-NWT-001210 Generic Requirements for High Bit Rate Digital Subscriber Lines (HDSL), Issue 1, October 1991. TR-TSY-000827 OTGR: Generic Operations Interfaces: Non-OSI Communications Architecture, Sections 11.1 and 11.3 (Issue 1). LIST OF ACRONYMS AND ...

  • ADC Soneplex Broadband System - page 13

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page xiii  2000, ADC Telecommunications, Inc. DFMS Digital Facility Maintenance System DLP Detailed Level Procedure (TOP term) DLX DS1 Loop Extender module (BB system only) DS1 Digital Signal - Level 1 DS2 Digital Signal - Level 2 DS3 Digital Signal - Level 3 DS3 MUX DS3 Multiplexer module DSX Di ...

  • ADC Soneplex Broadband System - page 14

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page xiv  2000, ADC Telecommunications, Inc. MON Monitor MPU Main Processor Unit MUX Multiplexer MXP DS3 MUX Protect slot MXW DS3 MUX Working slot NE Near End NE Network Element NEND Near End NID Network Interface Device NMA Bell Network Monitoring and Analysis System NRZ Non-Return-to-Zero NTP N ...

  • ADC Soneplex Broadband System - page 15

    ADCP-61-471 • Issue 4 • June 2000 • Preface Page xv  2000, ADC Telecommunications, Inc. SNR Signal-to-Noise Ratio SONET Synchronous Optical Network SPX Soneplex St Status STAT Status STK Streaker module SVC Switched Virtual Circuit T Tip TAD Trouble Analysis Data (TOP term) TAP Trouble Analysis Procedure (TOP term) TASC Telecommunications ...

  • ADC Soneplex Broadband System - page 16

    INTRODUCTION ...

  • ADC Soneplex Broadband System - page 17

    ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction Page 1-1  2000, ADC Telecommunications, Inc. SECTION 1: INTRODUCTION Content Page 1 GENERAL ......................................................................... 1-1 2 USING THE CRAFT INTERFACE .......................................................... 1-1 3 EDITING FIELDS ... ...

  • ADC Soneplex Broadband System - page 18

    ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction Page 1-2  2000, ADC Telecommunications, Inc. ACTIVE ALARMS ALARMS ALARM SUMMARY ALARM HISTORY CLEAR ALARM HISTORY ALARM/EVENT NOTIF . LEVEL ALARM LEVELS MPU ALARM LEVELS ODS2 ALARM LEVELS QLX ALARM LEVELS HLX ALARM LEVELS DLX ALARM LEVELS RLX ALARM LEVELS DS3 MUX ALARM LEVELS SYST ...

  • ADC Soneplex Broadband System - page 19

    ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction Page 1-3  2000, ADC Telecommunications, Inc. A logon is required to gain access to the Craft Interface. The logon remains active until either the operator logs off or a user-selectable period of keyboard inactivity is exceeded. The default time-out period is 30 minutes. Passw ords ...

  • ADC Soneplex Broadband System - page 20

    ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction Page 1-4  2000, ADC Telecommunications, Inc. 3.4 Space Bar Pressing the space bar w hen the cursor is in a toggle field changes the item at the cursor. If the item is selected from a list of options, pressing the space bar brings up the next choice. 3.5 “R” Key If you press th ...

  • ADC Soneplex Broadband System - page 21

    ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction Page 1-5  2000, ADC Telecommunications, Inc. 3.9 Data Entry T a b l e 1 - 2 s ho w s the different field types in the C r aft Interface, and how to enter data in them. A "toggle" field type means the user can press the space bar and "R" key to view and select d ...

  • ADC Soneplex Broadband System - page 22

    ADCP-61-471 • Issue 4 • June 2000 • Section 1: Introduction Page 1-6  2000, ADC Telecommunications, Inc. 2. Locate the specified director level, detail level, or trouble-clearing procedure. All procedures are in numerical order, regardless of type. The TOP procedures in this manual are of the following four types: • Non Trouble Clearing ...

  • ADC Soneplex Broadband System - page 23

    OPERATION AND MAINTENANCE ...

  • ADC Soneplex Broadband System - page 24

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-1 © 2000, ADC Telecommunications, Inc. SECTION 2: OPERATION AND MAINTENANCE Content Page 1 GENERAL ............................................................... 2-1 ALPHABETICAL TASK LIST ........................................................ 2-1 TASK INDEX LIST . ...

  • ADC Soneplex Broadband System - page 25

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-2 © 2000, ADC Telecommunications, Inc. ALPHABETICAL TASK LIST (continued) DS3 MUX ALARM LEVEL SETTING ............................................................ DLP-560 DS3 MUX APS TEST ...................................................................... DLP-512 D ...

  • ADC Soneplex Broadband System - page 26

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-3 © 2000, ADC Telecommunications, Inc. ALPHABETICAL TASK LIST (continued) RESET/LED TEST COMMANDS .............................................................. DLP-538 RLX ALARM LEVEL SETTING ............................................................... DLP-518 RLX ...

  • ADC Soneplex Broadband System - page 27

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-4 © 2000, ADC Telecommunications, Inc. ...

  • ADC Soneplex Broadband System - page 28

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-5 © 2000, ADC Telecommunications, Inc. IXL-001 Page 1 of 4 TASK INDEX LIST Find Your Job in the List Below Then Go To MODULE INSTALLATION AND TESTING PROCEDURES .............................................. NTP-002 System Components Inspection ....................... ...

  • ADC Soneplex Broadband System - page 29

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-6 © 2000, ADC Telecommunications, Inc. IXL-001 Page 2 of 4 TASK INDEX LIST, continued Find Your Job in the List Below Then Go To SYSTEM OR CIRCUIT PROVISIONING, continued ................................................... NTP-004 User Account Editing ................ ...

  • ADC Soneplex Broadband System - page 30

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-7 © 2000, ADC Telecommunications, Inc. IXL-001 Page 3 of 4 TASK INDEX LIST, continued Find Your Job in the List Below Then Go To MAINTENANCE PROCEDURES, continued ....................................................... NTP-005 Shelf Status Display .................... ...

  • ADC Soneplex Broadband System - page 31

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-8 © 2000, ADC Telecommunications, Inc. IXL-001 Page 4 of 4 TASK INDEX LIST, continued Find Your Job in the List Below Then Go To DLX AND REMOTE SYSTEM END-TO-END TEST PROCEDURES ......................................... NTP-010 Local Craft Interface Connection ....... ...

  • ADC Soneplex Broadband System - page 32

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-9 © 2000, ADC Telecommunications, Inc. NTP-002 Page 1 of 3 MODULE INSTALLATION AND TESTING PROCEDURES Summary : This procedure provides instructions for installing the various modules in the installed chassis and verifying operation. Installation includes inspecting t ...

  • ADC Soneplex Broadband System - page 33

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-10 © 2000, ADC Telecommunications, Inc. NTP-002 Page 2 of 3 Do Items Below in the Order Listed For Details Go To 5. Familiarize yourself with the Soneplex Broadband chassis, module l o ca ti o n s , a n d w i r i n g po i n t s . DLP-501 6. Verify that –48 VDC is pr ...

  • ADC Soneplex Broadband System - page 34

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-11 © 2000, ADC Telecommunications, Inc. NTP-002 Page 3 of 3 Do Items Below in the Order Listed For Details Go To Note: For information about installing and testing the Remote Test Access Unit (RTAU), which is used with MPU Software Version 5.3, refer to the Soneplex R ...

  • ADC Soneplex Broadband System - page 35

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-12 © 2000, ADC Telecommunications, Inc. NTP-003 Page 1 of 2 ODS2 MODULE AND REMOTE SYSTEM END-TO-END TEST PROCEDURES Summary : This procedure tells how to connect a Craft Interface device to the Soneplex equipment and configure ODS2 modules. It also tells how to conne ...

  • ADC Soneplex Broadband System - page 36

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-13 © 2000, ADC Telecommunications, Inc. NTP-003 Page 2 of 2 Do Items Below in the Order Listed For Details Go To 5. Momentarily press the LMPTST switch on the APU front panel and verify that all indicators light. 6. C o nn ec t t e r mi n a l e q u i p m e n t t o C r ...

  • ADC Soneplex Broadband System - page 37

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-14 © 2000, ADC Telecommunications, Inc. NTP-004 Page 1 of 2 SYSTEM OR CIRCUIT PROVISIONING PROCEDURES Summary : This procedure tells how to provision (turn-up) a new Soneplex system or circuit using the C raft Interface. The procedure assumes the equipment in the Sone ...

  • ADC Soneplex Broadband System - page 38

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-15 © 2000, ADC Telecommunications, Inc. NTP-004 Page 2 of 2 Do Items Below For Details Go To 14. If equipped, assign performance monitoring thresholds for each HDSL facility in the system. DLP-557 15. Set alarm/event notification level. DLP-552 16. Set MPU alarm level ...

  • ADC Soneplex Broadband System - page 39

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-16 © 2000, ADC Telecommunications, Inc. NTP-005 Page 1 of 2 MAINTENANCE PROCEDURES Summary: The following procedures can be used for maintenance for a Soneplex Broadband system. These procedures use the Craft Interface. They do not have to be performed in any particul ...

  • ADC Soneplex Broadband System - page 40

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-17 © 2000, ADC Telecommunications, Inc. NTP-005 Page 2 of 2 Do Items Below As Required For Details Go To Note: For information about installing, testing, and operating the Remote Test Access Unit (RTAU), which is used with MPU Software Version 5.3, refer to the Sonepl ...

  • ADC Soneplex Broadband System - page 41

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-18 © 2000, ADC Telecommunications, Inc. NTP-006 Page 1 of 1 ALARMS PROCEDURES Summary: The following procedures can be used to display alarms and locate trouble in a Soneplex system using the Craft Interface device. They may be performed in any order. Do Items Below A ...

  • ADC Soneplex Broadband System - page 42

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-19 © 2000, ADC Telecommunications, Inc. NTP-007 Page 1 of 1 MPU VERSION 5.3 SOFTWARE INSTALLATION AND TESTING PROCEDURES Summary : This procedure is used to install MPU Version 5.3 software on an MPU. To perform this procedure, a host computer with VT -100 emulation a ...

  • ADC Soneplex Broadband System - page 43

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-20 © 2000, ADC Telecommunications, Inc. NTP-008 Page 1 of 1 MPU CONFIGURATION DATA SAVE AND TRANSFER PROCEDURES Summary: This procedure is used to save the configuration data from an installed MPU and then transfer it to another MPU. A host computer containing softwar ...

  • ADC Soneplex Broadband System - page 44

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-21 © 2000, ADC Telecommunications, Inc. NTP-009 Page 1 of 2 HLXC AND REMOTE SYSTEM END-TO-END TEST PROCEDURES Summary: This procedure provides instructions for performing end-to-end tests between a central office Version C, D, E, or G HLXC module and a remote Version ...

  • ADC Soneplex Broadband System - page 45

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-22 © 2000, ADC Telecommunications, Inc. NTP-009 Page 2 of 2 Do Items Below in The Order Listed For Details Go To 4. Momentarily press the LMPTST switch on the APU front panel and verify that all indicators light. 5. Connect terminal equipment to Craft port on the fron ...

  • ADC Soneplex Broadband System - page 46

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-23 © 2000, ADC Telecommunications, Inc. NTP-010 Page 1 of 2 DLX AND REMOTE SYSTEM END-TO-END TEST PROCEDURES Summary: This procedure provides instructions for performing end-to-end tests between the DLX modules and the remote system. Performing an end-to-end test incl ...

  • ADC Soneplex Broadband System - page 47

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-24 © 2000, ADC Telecommunications, Inc. NTP-010 Page 2 of 2 Do Items Below in The Order Listed For Details Go To 7. Clear Alarm History. DLP-527 8. Enter Target Identifier and set date and time now or during provisioning (the turn-up process). D LP-528 9. Configure DS ...

  • ADC Soneplex Broadband System - page 48

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-25 © 2000, ADC Telecommunications, Inc. NTP-011 Page 1 of 2 RLX (OR RLXIOR) AND REMOTE SYSTEM END-TO-END TEST PROCEDURES Summary: This procedure provides instructions for performing end-to-end tests between the Version A or Version B RLX modules, or RLXIOR modules, an ...

  • ADC Soneplex Broadband System - page 49

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-26 © 2000, ADC Telecommunications, Inc. NTP-011 Page 2 of 2 Do Items Below in The Order Listed For Details Go To 7. Clear Alarm History. DLP-527 8. Enter Target Identifier and set date and time now or during provisioning (the turn-up process). D LP-528 9. Configure DS ...

  • ADC Soneplex Broadband System - page 50

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-27 © 2000, ADC Telecommunications, Inc. DLP-500 Page 1 of 1 SYSTEM COMPONENTS INSPECTION Summary: This procedure provides instructions for opening the shipping cartons, verifying that the correct components and quantities were received, and checking for damages. Cauti ...

  • ADC Soneplex Broadband System - page 51

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-28 © 2000, ADC Telecommunications, Inc. DLP-501 Page 1 of 2 CHASSIS INSPECTION Summary: This procedure provides instructions for identifying the Soneplex Broadband chassis and module locations. The chassis front and locations for modules are shown in Figure 501-1 . Th ...

  • ADC Soneplex Broadband System - page 52

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-29 © 2000, ADC Telecommunications, Inc. DLP-501 Page 2 of 2 1782-C SHIELD GROUND (6 PLACES) 2 - 4 RX TX NO -------| |---- C -----|/|----- NC ALARM CR VIS CR AUD MJ VIS MJ AUD MN VIS MN AUD RMT ACO RX TX PORT 4 RS-422 + - + - PORT 1 RS-422 + - + - ACO IN PORT 3 RS-232 ...

  • ADC Soneplex Broadband System - page 53

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-30 © 2000, ADC Telecommunications, Inc. DLP-502 Page 1 of 2 MPU INSTALLATION AND TESTING Summary: This procedure provides instructions on unpacking and installing a new MPU in a non-provisioned chassis, and then verifying that it is functioning properly. Caution: Modu ...

  • ADC Soneplex Broadband System - page 54

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-31 © 2000, ADC Telecommunications, Inc. DLP-502 Page 2 of 2 7. If there is power at both of the connections (A and B), remove and replace the MPU w ith a new one. 8. If STATUS indicator is red, this indicates an MPU hardware failure. Remove and replace the MPU with a ...

  • ADC Soneplex Broadband System - page 55

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-32 © 2000, ADC Telecommunications, Inc. DLP-503 Page 1 of 1 APU INSTALLATION AND TESTING Summary: This procedure provides guidelines for installing and testing the APU. Caution: Modules can be damaged by electrostatic discharge (ESD). Before handling any modules, ESD ...

  • ADC Soneplex Broadband System - page 56

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-33 © 2000, ADC Telecommunications, Inc. DLP-504 Page 1 of 2 LOCAL CRAFT INTERFACE CONNECTION Summary: This procedure provides instructions for accessing the Craft Interface. It can be accessed locally from a V T-100 compatible terminal or a host computer connected to ...

  • ADC Soneplex Broadband System - page 57

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-34 © 2000, ADC Telecommunications, Inc. DLP-504 Page 2 of 2 Table 504-1. MPU Craft Port Wiring PIN NAME SOURCE CIRCUIT CCITT CIRCUIT EIA FUNCTION 1 FG – 101 AA Frame Ground 2 TD DTE 103 BA Transmitted Data 3 RD DCE 104 BB Received Data 7 SG – 102 AB Signal Ground ...

  • ADC Soneplex Broadband System - page 58

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-35 © 2000, ADC Telecommunications, Inc. DLP-505 Page 1 of 2 DS3 MUX INSTALLATION AND TESTING Summary: This procedure describes how to install working and protect D1 DS3 MUX modules in the Soneplex Broadband chassis, as well as how to troubleshoot the installation. Cau ...

  • ADC Soneplex Broadband System - page 59

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-36 © 2000, ADC Telecommunications, Inc. DLP-505 Page 2 of 2 9. Repeat Steps 3 through 5, then Stop! You have completed this procedure . DS3 MUX UNITS HSW HSP TAU APU MPU MXP MXW CR MJ MN APU ACO PWR HSKP RMT ALM LMPTST DISP RMT STATUS RESET C R A F T DS3 FAIL RESET LM ...

  • ADC Soneplex Broadband System - page 60

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-37 © 2000, ADC Telecommunications, Inc. DLP-506 Page 1 of 5 ODS2 MODULE INSTALLATION AND TESTING Summary: This procedure describes how to install working and protect ODS2 modules in the Soneplex Broadband chassis, as well as how to troubleshoot the installation. The w ...

  • ADC Soneplex Broadband System - page 61

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-38 © 2000, ADC Telecommunications, Inc. DLP-506 Page 2 of 5 1. The fibers should have been placed in the rack when the chassis was installed. Route the fibers through the fiber management baffle into the top of the chassis to the ODS2 module locations. Protective cove ...

  • ADC Soneplex Broadband System - page 62

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-39 © 2000, ADC Telecommunications, Inc. DLP-506 Page 3 of 5 12. Is the OPT FAIL indicator lighted red? • If Yes , check the patch cord connection. If indicator remains lighted, replace the ODS2 module and go to Step 4. • If No , go to Step 13. 13. Pull the ODS2 mo ...

  • ADC Soneplex Broadband System - page 63

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-40 © 2000, ADC Telecommunications, Inc. DLP-506 Page 4 of 5 22. Repeat Steps 5 through 17 for the protection ODS2 module, then go to Step 23. 23. Repeat the entire procedure for each ODS2 module to be installed. Stop! You have completed this procedure. 6184-B RTAU MOD ...

  • ADC Soneplex Broadband System - page 64

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-41 © 2000, ADC Telecommunications, Inc. DLP-506 Page 5 of 5 RECEIVE CONNECTOR TRANSMIT CONNECTOR 2170-A Figure 506-2. ODS2 Transmit and Receive Connector Locations ...

  • ADC Soneplex Broadband System - page 65

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-42 © 2000, ADC Telecommunications, Inc. DLP-507 Page 1 of 2 FIBER OPTIC CONNECTOR AND ADAPTER CLEANING AND MATING INSTRUCTIONS Summary: The performance of an optical fiber system is largely dependent on the fiber connector cleaning procedures performed before installa ...

  • ADC Soneplex Broadband System - page 66

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-43 © 2000, ADC Telecommunications, Inc. DLP-507 Page 2 of 2 9. On FC connectors, push the connector into the adapter and screw the threaded cap clockwise onto the adapter to complete the connection. 10. Connect SC connector by aligning the housing key with the slot in ...

  • ADC Soneplex Broadband System - page 67

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-44 © 2000, ADC Telecommunications, Inc. DLP-508 Page 1 of 1 –48 VDC POWER SUPPLY TEST Summary: This procedure provides instructions for testing the voltage at the power terminal block located on the Soneplex Broadband chassis backplane. The multimeter should indicat ...

  • ADC Soneplex Broadband System - page 68

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-45 © 2000, ADC Telecommunications, Inc. DLP-509 Page 1 of 1 RLX AND RLXIOR STATUS DISPLAY Summary: This procedure provides instructions for displaying the status of the RLX or RLXIOR modules installed in the selected chassis. Note: The RLXIOR is displayed as “RLX” ...

  • ADC Soneplex Broadband System - page 69

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-46 © 2000, ADC Telecommunications, Inc. DLP-510 Page 1 of 2 ODS2 DISTRIBUTION SYSTEM AND QFLC/QLX CHASSIS END-TO-END TESTS Summary: This procedure provides instructions for performing end-to-end system tests on the equipment in a Soneplex ODS2 distribution system to a ...

  • ADC Soneplex Broadband System - page 70

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-47 © 2000, ADC Telecommunications, Inc. DLP-510 Page 2 of 2 9. At the chassis location, insert a test signal into the DS1 to be tested using the DS3 test set with DS1 option. 10. Verify that all alarm indicators on the chassis are off and the DS1 test set at the QFLC ...

  • ADC Soneplex Broadband System - page 71

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-48 © 2000, ADC Telecommunications, Inc. DLP-511 Page 1 of 1 DS3 MUX FORCED SWITCH TEST Summary: This procedure provides instructions for testing the forced-switch capability of the DS3 MUX in the Soneplex Broadband system. An end-to-end data path test is also performe ...

  • ADC Soneplex Broadband System - page 72

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-49 © 2000, ADC Telecommunications, Inc. DLP-512 Page 1 of 2 DS3 MUX APS TEST Summary: This procedure provides instructions for verifying that the APS (Automatic Protection Switching) feature of the DS3 MUX module is working. Both working (online) and protect (offline) ...

  • ADC Soneplex Broadband System - page 73

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-50 © 2000, ADC Telecommunications, Inc. DLP-512 Page 2 of 2 11. Perform the end-to-end test and verify error-free data. R eference: DLP-510 ODS2 Distribution System and QFLC/QLX Chassis End-to-End Tests Reference: DLP-520 HLXC and HLXR End-to-End Tests Reference: DLP- ...

  • ADC Soneplex Broadband System - page 74

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-51 © 2000, ADC Telecommunications, Inc. DLP-513 Page 1 of 2 ODS2 MODULE FORCED SWITCH TEST THROUGH THE CRAFT INTERFACE Summary: This procedure provides instructions for verifying that the force-to-protect feature of the ODS2 module is working. Both working (online) an ...

  • ADC Soneplex Broadband System - page 75

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-52 © 2000, ADC Telecommunications, Inc. DLP-513 Page 2 of 2 7. Hold ENABLED button down and momentarily press LMPTST/APS on the offline ODS2 module. 8. Verify that the ODS2 module that was offline is now online (its ONLINE indicator is green) and ODS2 module that was ...

  • ADC Soneplex Broadband System - page 76

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-53 © 2000, ADC Telecommunications, Inc. DLP-514 Page 1 of 2 ODS2 MODULE APS TEST Summary: This procedure provides instructions for verifying that the APS (Automatic Protection Switching) feature of the ODS2 module is working. Both working (online) and protect (offline ...

  • ADC Soneplex Broadband System - page 77

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-54 © 2000, ADC Telecommunications, Inc. DLP-514 Page 2 of 2 7. Verify that the STATUS indicator on the online ODS2 module is green, and that its ONLINE indicator is green. 8. If the online ODS2 module APS indicator is red, hold the ENABLED button down and momentarily ...

  • ADC Soneplex Broadband System - page 78

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-55 © 2000, ADC Telecommunications, Inc. DLP-515 Page 1 of 1 HDSL-EQUIPPED CIRCUIT CROSS-CONNECTS Summary: This procedure provides instructions for making any necessary cross-connects on HDSL loops, and then re-install the HLXC modules. Danger: To avoid electric shock, ...

  • ADC Soneplex Broadband System - page 79

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-56 © 2000, ADC Telecommunications, Inc. DLP-516 Page 1 of 6 HLXC INSTALLATION AND TESTING Summary: This procedure provides instructions for installing the Version C, D, E, or G HLXC module, which mounts in the half-height slots located in the middle of the chassis. A ...

  • ADC Soneplex Broadband System - page 80

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-57 © 2000, ADC Telecommunications, Inc. DLP-516 Page 2 of 6 5. Align the edges of the printed circuit card with the card guides in the chassis. Use the injector at the bottom of the front panel to press the HLXC module into the chassis. If there is excessive resistanc ...

  • ADC Soneplex Broadband System - page 81

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-58 © 2000, ADC Telecommunications, Inc. DLP-516 Page 3 of 6 5170-C CONFIGURATION SWITCHES (COMPONENT SIDE VIEW) DEFAULT SWITCH SETTINGS : 6, 5, 4 - ON, 3, 2, 1 - OFF 654321 ON 654321 ON SWITCH 6 5 4 3,2,1 FUNCTION LOOP POWER UNUSED LOOP 2 LINE LENGTH 3 2 1 0 - 133 FT ...

  • ADC Soneplex Broadband System - page 82

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-59 © 2000, ADC Telecommunications, Inc. DLP-516 Page 4 of 6 6181-B RTAU MODULE 1 to 28 HLXC UNITS HSW HSP TAU APU MPU MXP MXW DS3 FAIL RESET LMPTST/ APS LPBK ENABLE ONLINE STATUS APS LOCKOUT FORCE DS3 FAIL RESET LMPTST/ APS LPBK ENABLE ONLINE STATUS APS LOCKOUT FORCE ...

  • ADC Soneplex Broadband System - page 83

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-60 © 2000, ADC Telecommunications, Inc. DLP-516 Page 5 of 6 INITIAL START-UP TEST AND STAND ALONE OPERATION After the HLXC is installed in the chassis, its STATUS indicator will initially turn red to indicate the start of self-test diagnostics. While the self-test is ...

  • ADC Soneplex Broadband System - page 84

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-61 © 2000, ADC Telecommunications, Inc. DLP-516 Page 6 of 6 LPBK STAT H L X V - I- I+ V+ L1 L2 HDSL RMT/ HSKP LOSW BER LOSW BER DS1 LOS BER CONT SNR 6770-A 11395-A LPBK STAT H L X V- I- I+ V+ L1 L2 HDSL RMT/ HSKP LOSW BER LOSW BER DS1 LOS BER CONT SNR 2X STAT H L X LP ...

  • ADC Soneplex Broadband System - page 85

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-62 © 2000, ADC Telecommunications, Inc. DLP-517 Page 1 of 1 RTAU INSTALLATION AND TESTING Summary: This procedure provides instructions for installing the Remote Test Access Unit (RTAU) in the chassis and verifying that it is functioning properly. The RTAU requires no ...

  • ADC Soneplex Broadband System - page 86

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-63 © 2000, ADC Telecommunications, Inc. DLP-518 Page 1 of 2 RLX ALARM LEVEL SETTING Summary: This procedure provides instructions for assigning RLX alarm levels to each field. Note: A “ toggle ” field type means the user can press the space bar to view and select ...

  • ADC Soneplex Broadband System - page 87

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-64 © 2000, ADC Telecommunications, Inc. DLP-518 Page 2 of 2 7. Move to the DS1 Facility Alarms toggle fields. Select CRITICAL, MAJOR, MINOR, EVENT, or NOT RPTD for each field that you wish to change. Reference: TAP-101 Alarm Troubleshooting 8. Assign the selections by ...

  • ADC Soneplex Broadband System - page 88

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-65 © 2000, ADC Telecommunications, Inc. DLP-519 Page 1 of 3 MPU REPLACEMENT AND TESTING Summary This procedure provides instructions for installing a previously configured MPU in a chassis (whether provisioned or not) and verifying that the MPU is functioning. When an ...

  • ADC Soneplex Broadband System - page 89

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-66 © 2000, ADC Telecommunications, Inc. DLP-519 Page 2 of 3 1. To save the replacement MPU ’ s current configuration data, upload configuration data to the host computer. Contact the Technical A ssistance Center at ADC Telecommunications, described in the General In ...

  • ADC Soneplex Broadband System - page 90

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2- 67 © 2000, ADC Telecommunications, Inc. DLP-519 Page 3 of 3 10. Re-enter the MPU configuration data manually or follow this procedure: Reference: DLP-555 Configuration Data Download Command Stop! You have completed this procedure. 8025-A LOW SPEED UNITS HSW HSP TAU A ...

  • ADC Soneplex Broadband System - page 91

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-68 © 2000, ADC Telecommunications, Inc. DLP-520 Page 1 of 2 HLXC AND HLXR END-TO-END TESTS Summary: This procedure provides instructions for using a DS3 test set (with DS1 option) to verify that error-free data is received from the HLXC module at the HLXR module. Caut ...

  • ADC Soneplex Broadband System - page 92

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-69 © 2000, ADC Telecommunications, Inc. DLP-520 Page 2 of 2 DSX-3 CROSS-CONNECT DS3 TEST SET SONEPLEX BROADBAND CHASSIS DS3 TX RX MON OUT IN DS1 TEST SET TX RX TX RX HLXC HLXR SONEPLEX BROADBAND CHASSIS DS1 TEST SET TX RX OUT IN NET L1 L2 6187-D Figure 520-1. Test Set ...

  • ADC Soneplex Broadband System - page 93

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-70 © 2000, ADC Telecommunications, Inc. DLP-521 Page 1 of 2 DLX INSTALLATION AND TESTING Summary: This procedure provides instructions for mounting DLX modules in the half-height slots located in the middle of the chassis. A typical D LX installation consists of a DL ...

  • ADC Soneplex Broadband System - page 94

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-71 © 2000, ADC Telecommunications, Inc. DLP-521 Page 2 of 2 6182-B RTAU MODULE 1 to 28 DLX UNITS HSW HSP TAU APU MPU MXP MXW DS3 FAIL RESET LMPTST/ APS LPBK ENABLE ONLINE STATUS APS LOCKOUT FORCE DS3 FAIL RESET LMPTST/ APS LPBK ENABLE ONLINE STATUS APS LOCKOUT FORCE C ...

  • ADC Soneplex Broadband System - page 95

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-72 © 2000, ADC Telecommunications, Inc. DLP-522 Page 1 of 2 DLX- OR RLX-EQUIPPED CIRCUIT END-TO-END TESTS Summary: This procedure provides instructions for performing end-to-end system tests on Soneplex circuits equipped with DLX or RLX plug-ins. Two telephone technic ...

  • ADC Soneplex Broadband System - page 96

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-73 © 2000, ADC Telecommunications, Inc. DLP-522 Page 2 of 2 10. At the far end of the circuit, insert a DS1 test signal into the DS1 input using the DS1 test set. 11. Verify that all alarm indicators on the chassis are off and the DS3 test set with DS1 option is recei ...

  • ADC Soneplex Broadband System - page 97

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-74 © 2000, ADC Telecommunications, Inc. DLP-523 Page 1 of 2 ASSIGNMENT RECORDS Summary: This procedure provides instructions for recording circuit and facility names, along with the associated group-slot numbers. Each circuit in the Soneplex Broadband system is identi ...

  • ADC Soneplex Broadband System - page 98

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-75 © 2000, ADC Telecommunications, Inc. DLP-523 Page 2 of 2 GROUP-SLOT SYSTEM (CIRCUIT) NAME HSW/HSP MXW/MXP 1-1 1-2 1-3 1-4 2-1 2-2 2-3 2-4 3-1 3-2 3-3 3-4 4-1 4-2 4-3 4-4 5-1 5-2 5-3 5-4 6-1 6-2 6-3 6-4 7-1 7-2 7-3 7-4 Figure 523-2. Assignment Record Form ...

  • ADC Soneplex Broadband System - page 99

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-76 © 2000, ADC Telecommunications, Inc. DLP-524 Page 1 of 5 RLXIOR INSTALLATION AND TESTING Summary: This procedure provides instructions for installing the Repeater Loop Extender Intelligent Office Repeater (RLXIOR ) module in the chassis. A typical deployment consis ...

  • ADC Soneplex Broadband System - page 100

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-77 © 2000, ADC Telecommunications, Inc. DLP-524 Page 2 of 5 11680-A L P B K S T A T R L X V - I- I+ V + L O S B E R L O S B E R N E T L IN E I O R Figure 524-1. Repeater Loop Extender Intelligent Office Repeater (RLXIOR) Module (With Configuration Switches Shown) ...

  • ADC Soneplex Broadband System - page 101

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-78 © 2000, ADC Telecommunications, Inc. DLP-524 Page 3 of 5 11657-B ± 130 FF –130V 7F SPARE SPAN VOLTAGE BLOCK CODE Figure 524-2. RLXIOR Configuration Switches (With Default Settings) rlxior.slots.eps RTAU MODULE HSW HSP TAU APU MPU MXP MXW DS3 FAIL RESET LMPTST/ A ...

  • ADC Soneplex Broadband System - page 102

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-79 © 2000, ADC Telecommunications, Inc. DLP-524 Page 4 of 5 4. Observe the front panel LED indicators as shown in Figure 524-4 . Following insertion of the RLXIOR module into the chassis (assuming power is available), the STATUS LED turns red indicating the start of s ...

  • ADC Soneplex Broadband System - page 103

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-80 © 2000, ADC Telecommunications, Inc. DLP-524 Page 5 of 5 5. If the LED indicators respond as described, proceed to Step 6; otherwise, refer to the following to isolate the problem: STATUS is re d — The RLXIOR module has failed self-test diagnostics. Remove and re ...

  • ADC Soneplex Broadband System - page 104

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-81 © 2000, ADC Telecommunications, Inc. DLP-525 Page 1 of 6 RLX INSTALLATION AND TESTING Summary: This procedure provides instructions for installing Version A RLX or Version B RLX (B1 RLX and B2 RLX +) modules in the chassis and verifying that each unit is functionin ...

  • ADC Soneplex Broadband System - page 105

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-82 © 2000, ADC Telecommunications, Inc. DLP-525 Page 2 of 6 Note: The Version B RLX switches can be enabled or disabled by the MPU if the jumpers are in place. But the switches' jumper settings themselves (FFhex or 7Fhex for the Channel Blocking Idle switch; –1 ...

  • ADC Soneplex Broadband System - page 106

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-83 © 2000, ADC Telecommunications, Inc. DLP-525 Page 3 of 6 8. Repeat entire procedure for each RLX module. Stop! You have completed this procedure. 6262-A SA2 SA3 SA3-1 CONFIGURATION SWITCH PLACEMENT = 22.5 DB = 15 DB = 7.5 DB = 0 DB OPEN 123 OPEN 123 OPEN 123 NOT US ...

  • ADC Soneplex Broadband System - page 107

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-84 © 2000, ADC Telecommunications, Inc. DLP-525 Page 4 of 6 7428-B OR FF 7F CHANNEL BLOCKING IDLE CODE – 130V LINE POWER Figure 525-2. Placement of B1 RLX Jumpers 7035-A OR FF 7F CHANNEL BLOCKING IDLE CODE OR ± 130V – 130V LINE POWER Figure 525-3. Placement of B2 ...

  • ADC Soneplex Broadband System - page 108

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-85 © 2000, ADC Telecommunications, Inc. DLP-525 Page 5 of 6 6183-B RTAU MODULE 1 to 28 RLX UNITS HSW HSP TAU APU MPU MXP MXW DS3 FAIL RESET LMPTST/ APS LPBK ENABLE ONLINE STATUS APS LOCKOUT FORCE DS3 FAIL RESET LMPTST/ APS LPBK ENABLE ONLINE STATUS APS LOCKOUT FORCE C ...

  • ADC Soneplex Broadband System - page 109

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-86 © 2000, ADC Telecommunications, Inc. DLP-525 Page 6 of 6 7392-B LPBK STAT V - I- I+ V+ LOS BER R L X LOS BER NET LINE + LPBK STAT V - I- I+ V+ LOSW BER R L X ENBL LOS BER NET RESET LINE A2 RLX Version B RLX INITIAL START-UP TEST AND STAND ALONE OPERATION Following ...

  • ADC Soneplex Broadband System - page 110

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-87 © 2000, ADC Telecommunications, Inc. DLP-526 Page 1 of 2 CRAFT INTERFACE SYSTEM LOGON Summary: This procedure provides instructions for logon to the Craft Interface system. Logging on consists of connecting the control terminal or host computer to the Soneplex Broa ...

  • ADC Soneplex Broadband System - page 111

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-88 © 2000, ADC Telecommunications, Inc. DLP-526 Page 2 of 2 10454-A Welcome to ADC: SONEPLEX Shelf Interface Version 5.1.2 (C) Copyright 1997 ADC Telecommunications, Inc. Enter User Name: Figure 526-1. Craft Interface Logon Screen Welcome to ADC: SONEPLEX Shelf Interf ...

  • ADC Soneplex Broadband System - page 112

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-89 © 2000, ADC Telecommunications, Inc. DLP-527 Page 1 of 1 ALARM HISTORY CLEARANCE COMMAND Summary: This procedure provides instructions for clearing alarm history and all active alarms for the entire system. 1. Use the arrow keys to select Clear Alarm History from t ...

  • ADC Soneplex Broadband System - page 113

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-90 © 2000, ADC Telecommunications, Inc. DLP-528 Page 1 of 2 SYSTEM TID/DATE/TIME SETTING Summary: This procedure provides instructions for setting the Craft Interface system internal time and date clock; and entering the Target Identifier (TID). Time and date must be ...

  • ADC Soneplex Broadband System - page 114

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-91 © 2000, ADC Telecommunications, Inc. DLP-528 Page 2 of 2 5. Move the cursor to the Time field. Enter 00 to 23 for the hour and press the right arrow key. Enter 00 to 59 for the minutes. The Time field is updated each time the screen is refreshed. 6. Assign the sele ...

  • ADC Soneplex Broadband System - page 115

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-92 © 2000, ADC Telecommunications, Inc. DLP-529 Page 1 of 4 DS3 MUX CONFIGURATION Summary: This procedure provides instructions for equipping each DS3 MUX as required, set its service state, and set its protect status. Note: A “ toggle ” field type means the user ...

  • ADC Soneplex Broadband System - page 116

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-93 © 2000, ADC Telecommunications, Inc. DLP-529 Page 2 of 4 4. Starting at the top of Table 529-2 and working your way to the bottom, configure the DS3 MUX fields. 5. Assign the selections by pressing Enter or Return. Stop! You have completed this procedure. Table 529 ...

  • ADC Soneplex Broadband System - page 117

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-94 © 2000, ADC Telecommunications, Inc. DLP-529 Page 3 of 4 8105-B UNIT CONFIGURATION 1. MUX Configuration 2. ODS2 Configuration 3. QLX Configuration 4. HLX Configuration 5. DLX Configuration 6. RLX Configuration Display/Edit All MUX Configuration Parameters Press CON ...

  • ADC Soneplex Broadband System - page 118

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-95 © 2000, ADC Telecommunications, Inc. DLP-529 Page 4 of 4 Table 529-2. DS3 MUX Configuration Fields FIELD TYPE OPTIONS DESCRIPTION DEFAULT Unit Equipment State Toggle Equipped Sets all other fields to default values, establishes communication with the MPU, and allow ...

  • ADC Soneplex Broadband System - page 119

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-96 © 2000, ADC Telecommunications, Inc. DLP-530 Page 1 of 3 ODS2 MODULE CONFIGURATION Summary: This procedure provides instructions for establishing initial ODS2 configurations, viewing, and/or editing existing ODS2 configurations for each O DS2 module in the Soneplex ...

  • ADC Soneplex Broadband System - page 120

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-97 © 2000, ADC Telecommunications, Inc. DLP-530 Page 2 of 3 8110-C ODS2 CONFIGURATION Group: 3 Unit Equip State : EQUIPPED T2 Service State : IS Unit Service State: IS BER Alarm Thresh: 1E-8 Unit Protect State: UNPROTECTED BER Switch Thresh: 1E-6 T1 Service Line PARAM ...

  • ADC Soneplex Broadband System - page 121

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-98 © 2000, ADC Telecommunications, Inc. DLP-530 Page 3 of 3 Table 530-1. ODS2 Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT T2 Service State Toggle Leave this field at OOS at this time to avoid undesirable reporting of alarms. Select IS after ...

  • ADC Soneplex Broadband System - page 122

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-99 © 2000, ADC Telecommunications, Inc. DLP-531 Page 1 of 7 HLX CONFIGURATION Summary: This procedure provides instructions for using this menu to view or edit the configuration for each H LX module in the chassis. This menu can also be used to equip, provision, assig ...

  • ADC Soneplex Broadband System - page 123

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-100 © 2000, ADC Telecommunications, Inc. DLP-531 Page 2 of 7 HLX CONFIGURATION 1. HLX Unit Configuration 2. Loopback Configuration Press CONTROL-A For Assistance 6661-A Figure 531-1. HLX Configuration Menu 9818-A HLX UNIT CONFIGURATION Group: 6 Slot: 1 Circuit ID: Uni ...

  • ADC Soneplex Broadband System - page 124

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-101 © 2000, ADC Telecommunications, Inc. DLP-531 Page 3 of 7 Table 531-1. HLXC Configuration Fields FIELD TYPE OPTIONS DESCRIPTION DEFAULT Group Toggle 1, 2, 3, 4, 5, 6, or 7 Specifies the module ’ s group number designated on the chassis. 1 Slot Toggle 1, 2, 3, or ...

  • ADC Soneplex Broadband System - page 125

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-102 © 2000, ADC Telecommunications, Inc. DLP-531 Page 4 of 7 Table 531-1. HLXC Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT HLXR T1 Line Code Toggle AMI Alternate Mark Inversion AMI B8ZS Bipolar Eight-Zero Substitution AUTO Specifies that the ...

  • ADC Soneplex Broadband System - page 126

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-103 © 2000, ADC Telecommunications, Inc. DLP-531 Page 5 of 7 Table 531-1. HLXC Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT Half AIS Feature Toggle ENABLED This selection activates the Half AIS mode. An Alarm Indication Signal (all 1s) is gen ...

  • ADC Soneplex Broadband System - page 127

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-104 © 2000, ADC Telecommunications, Inc. DLP-531 Page 6 of 7 Table 531-1. HLXC Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT Network Keep Alive Toggle D2 HLXR only: AIS If the system detects a LOS (Loss of Signal) from the customer, an AIS or ...

  • ADC Soneplex Broadband System - page 128

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-105 © 2000, ADC Telecommunications, Inc. DLP-531 Page 7 of 7 Table 531-1. HLXC Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT Unit Service State Toggle IS (In-Service) Places the unit in service and allows equipment alarm reporting by the MPU. ...

  • ADC Soneplex Broadband System - page 129

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-106 © 2000, ADC Telecommunications, Inc. DLP-532 Page 1 of 3 DLX CONFIGURATION Summary: Th is procedure provides instructions for establishing initial configuration of D LX module(s) or view and/or edit the configurations for each DLX module in the Soneplex Broadband ...

  • ADC Soneplex Broadband System - page 130

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-107 © 2000, ADC Telecommunications, Inc. DLP-532 Page 2 of 3 6126-C DLX CONFIGURATION Group: 5 Slot: 1 Unit Equip State: EQUIPPED Unit Service State: IS T1 Provision: YES T1 Service State: OOS T1 Line Code: AMI Pulse Equalization: 0-133 FT. T1 BER Threshold: 1E-7 Loop ...

  • ADC Soneplex Broadband System - page 131

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-108 © 2000, ADC Telecommunications, Inc. DLP-532 Page 3 of 3 Table 533-1. DLX Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT T1 Provision Toggle YES Brings up T1 default settings and allows configuration changes. NO NO Prevents configuration se ...

  • ADC Soneplex Broadband System - page 132

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-109 © 2000, ADC Telecommunications, Inc. DLP-533 Page 1 of 5 RLXIOR CONFIGURATION Summary: This procedure provides instructions for configuring the RLXIOR module. The RLXIOR configuration process assumes that the MPU is installed and the Craft Interface is operating. ...

  • ADC Soneplex Broadband System - page 133

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-110 © 2000, ADC Telecommunications, Inc. DLP-533 Page 2 of 5 11783-A RLX CONFIGURATION Group: 1 Slot: 1 Circuit ID: Unit Equip State : EQUIPPED Pulse Equalization : NOT APPL Unit Service State: OOS LBO Setting : UNIT SWITCH T1 Provision : YES Programmable Loopback : D ...

  • ADC Soneplex Broadband System - page 134

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-111 © 2000, ADC Telecommunications, Inc. DLP-533 Page 3 of 5 Table 533-1. RLXIOR Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT* Unit Service State Toggle Leave this field at OOS at this time to avoid undesirable reporting of alarms. Set this f ...

  • ADC Soneplex Broadband System - page 135

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-112 © 2000, ADC Telecommunications, Inc. DLP-533 Page 4 of 5 Table 533-1. RLXIOR Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT* Span Power Setting** Toggle UNIT SWITCH Stops span power on the RLXIOR. ENABLED ENABLED Enables span power using th ...

  • ADC Soneplex Broadband System - page 136

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-113 © 2000, ADC Telecommunications, Inc. DLP-533 Page 5 of 5 Table 533-1. RLXIOR Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT* Loopback Activation Code Input 16 binary characters (0 ’ s and 1 ’ s) must be entered. These codes can be set t ...

  • ADC Soneplex Broadband System - page 137

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-114 © 2000, ADC Telecommunications, Inc. DLP-534 Page 1 of 6 RLX CONFIGURATION Summary: This procedure provides instructions for establishing initial configuration of Version A R LX and Version B R LX (B 1 RL X and B2 RL X+) modules, viewing, and/or editing the config ...

  • ADC Soneplex Broadband System - page 138

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-115 © 2000, ADC Telecommunications, Inc. DLP-534 Page 2 of 6 6127-C RLX CONFIGURATION Group: 1 Slot: 1 Circuit ID: Unit Equip State : EQUIPPED Pulse Equalization : NOT APPL Unit Service State: OOS LBO Setting : UNIT SWITCH T1 Provision : YES Programmable Loopback : DI ...

  • ADC Soneplex Broadband System - page 139

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-116 © 2000, ADC Telecommunications, Inc. DLP-534 Page 3 of 6 Table 534-1. RLX Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT Unit Service State Toggle IS (In-Service) Places the unit in service and allows equipment alarm reporting by the MPU. M ...

  • ADC Soneplex Broadband System - page 140

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-117 © 2000, ADC Telecommunications, Inc. DLP-534 Page 4 of 6 Table 534-1. RLX Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT BER Threshold Toggle Range of 10 -3 to 10 -9 The average Bit Error Ratios of both the incoming DS1 signals are monitore ...

  • ADC Soneplex Broadband System - page 141

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-118 © 2000, ADC Telecommunications, Inc. DLP-534 Page 5 of 6 Table 534-1. RLX Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT NID Loopback* † Toggle UNIT SWITCH Selects NID setting (either enabled [default] or disabled) on the Version A RLX. W ...

  • ADC Soneplex Broadband System - page 142

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-119 © 2000, ADC Telecommunications, Inc. DLP-534 Page 6 of 6 Table 534-1. RLX Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT DS0 Channel Toggle “ B ” (for DS0 Channel blocking) or blank (for normal operation) for each of the 24 DS0 channels ...

  • ADC Soneplex Broadband System - page 143

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-120 © 2000, ADC Telecommunications, Inc. DLP-535 Page 1 of 2 USER ACCOUNT EDITING Summary: This procedure provides instructions to system administrators for editing user account names and passwords, and for establishing privilege levels to regulate user access to vari ...

  • ADC Soneplex Broadband System - page 144

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-121 © 2000, ADC Telecommunications, Inc. DLP-535 Page 2 of 2 6. Use the arrow keys to move the cursor to the Privilege Level field. U se the space bar to select the privilege level. The lowest security level is 1, and the highest level is 5. • Users assigned Level 5 ...

  • ADC Soneplex Broadband System - page 145

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-122 © 2000, ADC Telecommunications, Inc. DLP-536 Page 1 of 2 MENU SECURITY EDITING Summary: This procedure provides instructions to system administrators for assigning or changing access user privilege levels to the Craft Interface menus. Note: A “ toggle ” field ...

  • ADC Soneplex Broadband System - page 146

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-123 © 2000, ADC Telecommunications, Inc. DLP-536 Page 2 of 2 14854-A EDIT MENU SECURITY Menu or Command Privilege Menu or Command Privilege ========================== ========= ============================== ========= Press CONTROL-A For Assistance Clear Alarm History ...

  • ADC Soneplex Broadband System - page 147

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-124 © 2000, ADC Telecommunications, Inc. DLP-537 Page 1 of 2 FORCE/APS COMMANDS Summary: This procedure provides instructions for using manual (forced switching) and automatic protection switching commands with the DS3 MUX and ODS2 modules. Executing one of the Force ...

  • ADC Soneplex Broadband System - page 148

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-125 © 2000, ADC Telecommunications, Inc. DLP-537 Page 2 of 2 FORCE / APS COMMANDS Online Unit APS / Lockout Status Command =========== ==================== ======================== MUX (MXW/MXP) : DS2 Group 1 : WORKING ENABLED / UNLOCKED DS2 Group 2 : DS2 Group 3 : DS ...

  • ADC Soneplex Broadband System - page 149

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-126 © 2000, ADC Telecommunications, Inc. DLP-538 Page 1 of 2 RESET/LED TEST COMMANDS Summary: This procedure provides instructions for performing a software reset and reinitialization, or to test the indicators on selected modules. R esets and LED Tests cannot be perf ...

  • ADC Soneplex Broadband System - page 150

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-127 © 2000, ADC Telecommunications, Inc. DLP-538 Page 2 of 2 4. Assign the selections by pressing Enter or Return. If Reset is selected, a pop-up appears as shown below: Press Y for yes or N for no. Stop! You have completed this procedure. RESET / LED TEST Low Speed U ...

  • ADC Soneplex Broadband System - page 151

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-128 © 2000, ADC Telecommunications, Inc. DLP-539 Page 1 of 1 ACO (ALARM CUT-OFF) COMMAND Summary: This procedure provides instructions for silencing currently active audible alarms. Any new alarms will cause the audible alarm relay to be activated again and the ACO st ...

  • ADC Soneplex Broadband System - page 152

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-129 © 2000, ADC Telecommunications, Inc. DLP-540 Page 1 of 1 INVENTORY DISPLAY Summary: This procedure provides instructions for displaying inventory information for the modules installed in the Soneplex Broadband chassis and modules installed at the remote locations. ...

  • ADC Soneplex Broadband System - page 153

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-130 © 2000, ADC Telecommunications, Inc. DLP-541 Page 1 of 16 LOOPBACK STATUS/COMMANDS Summary: This procedure provides instructions for displaying the currently active loopbacks for all circuits in the system, and for enabling/disabling loopbacks. Caution: Do not per ...

  • ADC Soneplex Broadband System - page 154

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-131 © 2000, ADC Telecommunications, Inc. DLP-541 Page 2 of 16 Note: The ACT CUST and ACT NET options create customer and network loopbacks on the HLXC and HLXR cards. The SEND LPBK option does not apply to loopbacks on the local HLXC or HLXR cards. Instead, the SEND L ...

  • ADC Soneplex Broadband System - page 155

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-132 © 2000, ADC Telecommunications, Inc. DLP-541 Page 3 of 16 • the HRX1 and the HRX2 (two repeaters) • the HXR2 and the HLXR (two repeaters) For example, if an HDSL loop failure occurs on both loops between the HRX and the HLXR (one repeater), the REMOTE column w ...

  • ADC Soneplex Broadband System - page 156

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-133 © 2000, ADC Telecommunications, Inc. DLP-541 Page 4 of 16 5323-A SYSTEM MAINTENANCE 1. Force/APS Commands 2. Reset/LED Test Commands 3. Execute ACO (Alarm Cut-Off) 4. Loopback Status/Commands 5. Display Inventory 6. Display Circuit IDs 7. Upload/Download Commands ...

  • ADC Soneplex Broadband System - page 157

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-134 © 2000, ADC Telecommunications, Inc. DLP-541 Page 5 of 16 High Speed Loopback Status/Commands Unit Location - LOCAL =========== COMMANDS: Loopback : STATUS: Unit Type: DS3MUX +---------+ | | ----------------->|-------->|-----------------> | | NETWORK DS3 ...

  • ADC Soneplex Broadband System - page 158

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-135 © 2000, ADC Telecommunications, Inc. DLP-541 Page 6 of 16 Table 541-1. Loopback Selection Field Options FIELD UNIT TYPE LOOPBACK TYPE OPTION SHOWN IN… DS3 MUX (HIGH SPEED) Local DS3 MUX Network Loopback at the DS3 MUX ACT NET Figure 541-5 HDSL SYSTEMS (LOW SPEED ...

  • ADC Soneplex Broadband System - page 159

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-136 © 2000, ADC Telecommunications, Inc. DLP-541 Page 7 of 16 High Speed Loopback Status/Commands Unit Location - LOCAL =========== COMMANDS: Loopback : ACT NET STATUS: Unit Type: DS3MUX +---------+ | | ----------------->|----+ |-----------------> | | | NETWORK ...

  • ADC Soneplex Broadband System - page 160

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-137 © 2000, ADC Telecommunications, Inc. DLP-541 Page 8 of 16 11382-A Low Speed Loopback Status/Commands Group: 4 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ========== ========== ========== COMMANDS: Loopback: N/A STATUS: Unit Type: HLXC NONE HLXR +---------+ +---- ...

  • ADC Soneplex Broadband System - page 161

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-138 © 2000, ADC Telecommunications, Inc. DLP-541 Page 9 of 16 11383-A Low Speed Loopback Status/Commands Group: 4 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ========== ========== ========== COMMANDS: N/A Loopback: STATUS: Unit Type: HLXC NONE HLXR +---------+ +---- ...

  • ADC Soneplex Broadband System - page 162

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-139 © 2000, ADC Telecommunications, Inc. DLP-541 Page 10 of 16 9499-D Low Speed Loopback Status/Commands Group: 4 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ========== ========== ========== COMMANDS: Loopback: STATUS: Unit Type: HLXC HRX HLXR +---------+ +--------- ...

  • ADC Soneplex Broadband System - page 163

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-140 © 2000, ADC Telecommunications, Inc. DLP-541 Page 11 of 16 Low Speed Loopback Status/Commands Group: 1 DS1#: 4 Location - LOCAL REPEATER1 REPEATER2 REMOTE ========== ========== ========== ========== COMMANDS: Loopback: STATUS: Unit Type: HLXC HRX1 HRX2 HLXR +----- ...

  • ADC Soneplex Broadband System - page 164

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-141 © 2000, ADC Telecommunications, Inc. DLP-541 Page 12 of 16 9698-A Low Speed Loopback Status/Commands Group: 2 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ======== ========= ======== COMMANDS: Loopback: N/A STATUS: Unit Type: ODS2 NONE QLX +---------+ +---------+ ...

  • ADC Soneplex Broadband System - page 165

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-142 © 2000, ADC Telecommunications, Inc. DLP-541 Page 13 of 16 14849-A Low Speed Loopback Status/Commands Group: 2 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ======== ========= ======== COMMANDS: Loopback: N/A STATUS: Unit Type: ODS2 NONE QLX +---------+ +--------- ...

  • ADC Soneplex Broadband System - page 166

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-143 © 2000, ADC Telecommunications, Inc. DLP-541 Page 14 of 16 9700-A Low Speed Loopback Status/Commands Group: 5 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ======== ========= ======== COMMANDS: Loopback: N/A N/A STATUS: Unit Type: DLX NONE NONE +---------+ | |AIS ...

  • ADC Soneplex Broadband System - page 167

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-144 © 2000, ADC Telecommunications, Inc. DLP-541 Page 15 of 16 Low Speed Loopback Status/Commands Group: 1 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ========== ========== ========== COMMANDS: Loopback: N/A N/A STATUS: Unit Type: RLX NONE NONE +---------+ | | ----- ...

  • ADC Soneplex Broadband System - page 168

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-145 © 2000, ADC Telecommunications, Inc. DLP-541 Page 16 of 16 14850-A Low Speed Loopback Status/Commands Group: 5 DS1#: 1 Unit Location - LOCAL REPEATER REMOTE ======== ========= ======== COMMANDS: Loopback: N/A N/A STATUS: Unit Type: RLX NONE NONE +---------+ LPBK R ...

  • ADC Soneplex Broadband System - page 169

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-146 © 2000, ADC Telecommunications, Inc. DLP-542 Page 1 of 4 ACTIVE ALARMS DISPLAY Summary: This procedure provides instructions for displaying only the currently active alarms for all circuits in the system. Note: Press CONTROL-A for help information about moving aro ...

  • ADC Soneplex Broadband System - page 170

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-147 © 2000, ADC Telecommunications, Inc. DLP-542 Page 2 of 4 6675-A ACTIVE ALARMS Legend: Access ID=Identifier[-]Shelf-Grp-Slot[-Site(1=Lcl,2=Rmt) | -Loop(1=Lp 1,2=Lp 2)] Access ID Locn Circuit ID Condition Status ACO ---------------- ---- -------------------- ------- ...

  • ADC Soneplex Broadband System - page 171

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-148 © 2000, ADC Telecommunications, Inc. DLP-542 Page 3 of 4 11375-B NEND NEND FEND HLXC HLXR FEND T O NETWORK/MUX T O CUST OMER LOOP 2 LOOP 1 LOOP 2 LOOP 1 LOOP 1 LOOP 2 HRX1 XCVR CRP1 CRP1 XCVR XCVR RRP1 RRP1 XCVR HRX2 XCVR CRP2 CRP2 XCVR XCVR RRP2 RRP2 XCVR KEY NEN ...

  • ADC Soneplex Broadband System - page 172

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-149 © 2000, ADC Telecommunications, Inc. DLP-542 Page 4 of 4 KEY NEND means "PM information collected directly from incoming T1 signals, both at local and remote sites". 10456-A NEND NEND ODS2 QLX OR QFLC OPTICAL DS2 OPTICAL DS2 TO NETWORK TO CUST OMER DS1 D ...

  • ADC Soneplex Broadband System - page 173

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-150 © 2000, ADC Telecommunications, Inc. DLP-543 Page 1 of 1 ALARM SUMMARY DISPLAY Summary: Use this command to display a summary of the current alarms for the Soneplex Broadband chassis selected. Note: Press CONTROL-A for help information about moving around and edit ...

  • ADC Soneplex Broadband System - page 174

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-151 © 2000, ADC Telecommunications, Inc. DLP-544 Page 1 of 4 ALARM HISTORY DISPLAY Summary: This procedure provides instructions for displaying both active and cleared alarms stored in the alarm history. Each alarm declaration or alarm clearing creates a separate mess ...

  • ADC Soneplex Broadband System - page 175

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-152 © 2000, ADC Telecommunications, Inc. DLP-544 Page 2 of 4 ALARM HISTORY Legend: Access ID=Identifier[-]Shelf-Grp-Slot[-Site(1=Lcl,2=Rmt) | -Loop(1=Lp 1,2=Lp 2)] Date Time Access ID Locn Circuit ID Condition St -------- -------- ---------------- ---- --------------- ...

  • ADC Soneplex Broadband System - page 176

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-153 © 2000, ADC Telecommunications, Inc. DLP-544 Page 3 of 4 11375-B NEND NEND FEND HLXC HLXR FEND T O NETWORK/MUX T O CUST OMER LOOP 2 LOOP 1 LOOP 2 LOOP 1 LOOP 1 LOOP 2 HRX1 XCVR CRP1 CRP1 XCVR XCVR RRP1 RRP1 XCVR HRX2 XCVR CRP2 CRP2 XCVR XCVR RRP2 RRP2 XCVR KEY NEN ...

  • ADC Soneplex Broadband System - page 177

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-154 © 2000, ADC Telecommunications, Inc. DLP-544 Page 4 of 4 KEY NEND means "PM information collected directly from incoming T1 signals, both at local and remote sites". 10456-A NEND NEND ODS2 QLX OR QFLC OPTICAL DS2 OPTICAL DS2 TO NETWORK TO CUST OMER DS1 D ...

  • ADC Soneplex Broadband System - page 178

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-155 © 2000, ADC Telecommunications, Inc. DLP-545 Page 1 of 2 SHELF STATUS DISPLAY Summary: This procedure provides instructions for viewing the status of all the modules installed in the selected Soneplex Broadband chassis. Note: Press CONTROL-A for help information a ...

  • ADC Soneplex Broadband System - page 179

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-156 © 2000, ADC Telecommunications, Inc. DLP-545 Page 2 of 2 HELP SCREEN - press any key to return to MENU On MENU: Unit Type: M - MUX + - MUX-PLUS X - MUX-ENHANCED O - ODS2 H - HLX R - RLX TAU Unit Type D - DLX T - TAU Q - QLX R - RTAU Control-P - Jump to previous me ...

  • ADC Soneplex Broadband System - page 180

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-157 © 2000, ADC Telecommunications, Inc. DLP-546 Page 1 of 2 DS3 MUX STATUS DISPLAY Summary: This procedure provides instructions for displaying the status of the working and protect Soneplex DS3 MUX modules installed in the chassis. Note: Press CONTROL-A for help inf ...

  • ADC Soneplex Broadband System - page 181

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-158 © 2000, ADC Telecommunications, Inc. DLP-546 Page 2 of 2 DS3MUX STATUS Working Protect ------- ------- Unit Online : YES NO Board Fail : NO NO Mate Comm Fail : NO NO RX DS3 Lpbk : NO NO DS3 RX Status : OK OK APS Status : ENABLED APS Lockout : NO Splitter Present : ...

  • ADC Soneplex Broadband System - page 182

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-159 © 2000, ADC Telecommunications, Inc. DLP-547 Page 1 of 1 ODS2 MODULE STATUS DISPLAY Summary: Use this command to display the status of the working and protect Soneplex ODS2 modules installed in the selected chassis. Note: Press CONTROL-A for help information about ...

  • ADC Soneplex Broadband System - page 183

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-160 © 2000, ADC Telecommunications, Inc. DLP-548 Page 1 of 5 HLX AND HRX STATUS DISPLAY Summary: This procedure provides instructions for displaying the status of the HLX modules installed in the central office chassis, the associated HLX modules at the remote end of ...

  • ADC Soneplex Broadband System - page 184

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-161 © 2000, ADC Telecommunications, Inc. DLP-548 Page 2 of 5 Table 548-2. HLX and HRX Status Field Displays STATUS FIELD: MODULE DISPLAY DESCRIPTION DS1 Loopback ACTIVE, INACTIVE A loopback is active or has been deactivated at the HLXC, HRX, or HLXR. DS1 LOS YES, NO A ...

  • ADC Soneplex Broadband System - page 185

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-162 © 2000, ADC Telecommunications, Inc. DLP-548 Page 3 of 5 HLX/HRX STATUS Group: 1 Slot: 2 Circuit ID: HLXC HRX1 HRX2 HLXR =========== =========== =========== =========== DS1 Loopback : INACTIVE N/A N/A INACTIVE DS1 LOS : YES N/A N/A YES DS1 Line Code : AMI N/A N/A ...

  • ADC Soneplex Broadband System - page 186

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-163 © 2000, ADC Telecommunications, Inc. DLP-548 Page 4 of 5 11374-B HLX/HRX STATUS Group: 1 Slot: 4 Circuit ID: HLXC HRX1 HRX2 HLXR =========== =========== =========== =========== DS1 Loopback : INACTIVE INACTIVE INACTIVE INACTIVE DS1 LOS : YES N/A N/A YES DS1 Line C ...

  • ADC Soneplex Broadband System - page 187

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-164 © 2000, ADC Telecommunications, Inc. DLP-548 Page 5 of 5 1 1375-A NEND NEND FEND HLXC HLXR FEND TO NETWORK TO CUSTOMER LOOP 2 LOOP 1 LOOP 2 LOOP 1 LOOP 1 LOOP 2 HRX1 XCVR CRP1 CRP1 XCVR XCVR RRP1 RRP1 XCVR HRX2 XCVR CRP2 CRP2 XCVR XCVR RRP2 RRP2 XCVR KEY NEND mean ...

  • ADC Soneplex Broadband System - page 188

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-165 © 2000, ADC Telecommunications, Inc. DLP-549 Page 1 of 3 SERIAL PORT CONFIGURATION Summary: This procedure provides instructions for changing serial port configurations on the chassis to match the communications device parameters. Note: A “toggle” field type m ...

  • ADC Soneplex Broadband System - page 189

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-166 © 2000, ADC Telecommunications, Inc. DLP-549 Page 2 of 3 Note: The Craft port defaults to 9600 Baud. When AUTO is selected, pressing Enter or Return before logon will determine the communication speed (1200 – 19200 bps) for the session. 7. Move the cursor to the ...

  • ADC Soneplex Broadband System - page 190

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-167 © 2000, ADC Telecommunications, Inc. DLP-549 Page 3 of 3 18. If you made changes to port configurations, log off and then log back on to the system to implement the changes. Reference: DLP-564 Craft Interface System Logoff Reference: DLP-526 Craft Interface System ...

  • ADC Soneplex Broadband System - page 191

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-168 © 2000, ADC Telecommunications, Inc. DLP-550 Page 1 of 2 SHELF HOUSEKEEPING ALARM LABELS Summary: Use this selection to assign names to the housekeeping input alarm contacts. When a housekeeping alarm (door ajar, water on floor, fire alarm, etc.) occurs, the assig ...

  • ADC Soneplex Broadband System - page 192

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-169 © 2000, ADC Telecommunications, Inc. DLP-550 Page 2 of 2 6143-A SHELF HOUSEKEEPING LABELS # Condition Label = ================ 1 HSKP1 2 HSKP2 3 HSKP3 4 HSKP4 5 HSKP5 6 HSKP6 7 HSKP7 8 HSKP8 Press CONTROL-A For Assistance Figure 550-1. Shelf Housekeeping Labels Sc ...

  • ADC Soneplex Broadband System - page 193

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-170 © 2000, ADC Telecommunications, Inc. DLP-551 Page 1 of 3 MPU SOFTWARE DOWNLOAD COMMAND Summary: This procedure is used to download the MPU software into an MPU module. This involves the transfer of two files. It requires 12 to 17 minutes to transfer both files, de ...

  • ADC Soneplex Broadband System - page 194

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-171 © 2000, ADC Telecommunications, Inc. DLP-551 Page 2 of 3 8. Enter "v50_dlp" source file name from the host computer and start the file transfer process. 9. Enter the Version 5.3 MPU software source file name (mpu_5xxx.bin) from the host computer. Then st ...

  • ADC Soneplex Broadband System - page 195

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-172 © 2000, ADC Telecommunications, Inc. DLP-551 Page 3 of 3 5323-A SYSTEM MAINTENANCE 1. Force/APS Commands 2. Reset/LED Test Commands 3. Execute ACO (Alarm Cut-Off) 4. Loopback Status/Commands 5. Display Inventory 6. Display Circuit IDs 7. Upload/Download Commands 8 ...

  • ADC Soneplex Broadband System - page 196

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-173 © 2000, ADC Telecommunications, Inc. DLP-552 Page 1 of 2 ALARM/EVENT NOTIFICATION LEVEL SETTING Summary: This procedure provides instructions for filtering the alarm notification pop-up, based on the criticality of the alarm or event. When this feature is used, a ...

  • ADC Soneplex Broadband System - page 197

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-174 © 2000, ADC Telecommunications, Inc. DLP-552 Page 2 of 2 6144-A SET ALARM/EVENT NOTIFICATION LEVEL Level: MAJOR Press CONTROL-A For Assistance Figure 552-1. Alarm/Event Notification Level ...

  • ADC Soneplex Broadband System - page 198

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-175 © 2000, ADC Telecommunications, Inc. DLP-553 Page 1 of 1 DLX STATUS DISPLAY Summary: This procedure provides instructions for displaying the status of the DLX modules installed in the selected chassis. Note: Press CONTROL-A for help information about moving around ...

  • ADC Soneplex Broadband System - page 199

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-176 © 2000, ADC Telecommunications, Inc. DLP-554 Page 1 of 2 CONFIGURATION DATA UPLOAD COMMAND Summary: This procedure provides instructions for copying the current MPU configuration data to an external device (host computer) for transfer to another MPU. A host comput ...

  • ADC Soneplex Broadband System - page 200

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-177 © 2000, ADC Telecommunications, Inc. DLP-554 Page 2 of 2 5323-A SYSTEM MAINTENANCE 1. Force/APS Commands 2. Reset/LED Test Commands 3. Execute ACO (Alarm Cut-Off) 4. Loopback Status/Commands 5. Display Inventory 6. Display Circuit IDs 7. Upload/Download Commands 8 ...

  • ADC Soneplex Broadband System - page 201

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-178 © 2000, ADC Telecommunications, Inc. DLP-555 Page 1 of 2 CONFIGURATION DATA DOWNLOAD COMMAND Summary: This procedure provides instructions for transferring MPU configuration data that was saved on an external device (host computer) back to an MPU. A host computer ...

  • ADC Soneplex Broadband System - page 202

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-179 © 2000, ADC Telecommunications, Inc. DLP-555 Page 2 of 2 7. After a download is finished, a message appears to indicate whether the download was successful or unsuccessful. • If successful , the MPU will reboot automatically to ensure that the configuration data ...

  • ADC Soneplex Broadband System - page 203

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-180 © 2000, ADC Telecommunications, Inc. DLP-556 Page 1 of 3 DS1 PM CONFIGURATION Summary: This procedure provides instructions for assigning thresholds for each DS1 in the Soneplex Broadband system. You can also view or edit the DS1 Performance Monitoring configurati ...

  • ADC Soneplex Broadband System - page 204

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-181 © 2000, ADC Telecommunications, Inc. DLP-556 Page 2 of 3 6. Move to the Mon Type Alarms toggle fields. The following selections are possible: • Critical Allows notification of all Critical, Major, Minor, and Ev ent alarms as they occur. • Major Allows notifica ...

  • ADC Soneplex Broadband System - page 205

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-182 © 2000, ADC Telecommunications, Inc. DLP-556 Page 3 of 3 Table 556-1. DS1 Threshold-Crossing Defaults and Range Values LINE/PATH (NEND) THRESHOLDS MON TYPE 15-MINUTE DEFAULT 15-MINUTE VALID RANGE DAILY DEFAULT DAILY VALID RANGE FCP 5 1 to 5 480 1 to 480 CVL 13340 ...

  • ADC Soneplex Broadband System - page 206

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-183 © 2000, ADC Telecommunications, Inc. DLP-557 Page 1 of 3 HDSL PM CONFIGURATION Summary: This procedure provides instructions for assigning thresholds for each H DSL facility in the Soneplex Broadband system. You can also view or edit the HDSL Performance Monitorin ...

  • ADC Soneplex Broadband System - page 207

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-184 © 2000, ADC Telecommunications, Inc. DLP-557 Page 2 of 3 6. Move to the Mon Type Alarms toggle fields. The following selections are possible: • Critical – Allows notification of all Critical alarms as they occur. • Major – Allows notification of all Major ...

  • ADC Soneplex Broadband System - page 208

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-185 © 2000, ADC Telecommunications, Inc. DLP-557 Page 3 of 3 Table 557-1. HDSL Threshold-Crossing Default and Range Values PATH THRESHOLDS (ALL LOCATIONS) MON TYPE 15-MINUTE DEFAULT 15-MINUTE VALID RANGE DAILY DEFAULT DAILY VALID RANGE FCP 5 1 to 5 480 1 to 480 CVP 68 ...

  • ADC Soneplex Broadband System - page 209

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2- 186 © 2000, ADC Telecommunications, Inc. DLP-558 Page 1 of 3 X.25 PORT CONFIGURATION Su mm ary: Use this procedure to set several parameters that must be set before using the X.25 interface. Table 558-1 , Table 558-2 , and Table 558-3 outline the X .25 interface para ...

  • ADC Soneplex Broadband System - page 210

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-187 © 2000, ADC Telecommunications, Inc. DLP-558 Page 2 of 3 4. Repeat Step 3 for each field that you wish to change. 5. Assign the selections by pressing Enter or Return. 6. Momentarily press RESET on the MPU front panel, or perform a soft reset, in order to re- init ...

  • ADC Soneplex Broadband System - page 211

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-188 © 2000, ADC Telecommunications, Inc. DLP-558 Page 3 of 3 Table 558-3. Network Layer X.25 Packet Parameters NETWORK PARAMETER SET VALUE RANGE CONFIGURABLE DEFAULT PVC Logical Channel # * 1 - 255 See Table 558-2 Modulo 8 Packet Size * 128, 256 octets 128 Window Size ...

  • ADC Soneplex Broadband System - page 212

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-189 © 2000, ADC Telecommunications, Inc. DLP-559 Page 1 of 2 MPU ALARM LEVEL SETTING Summary: This procedure provides instructions for setting MPU Alarm Levels. Note: A “toggle” field type means the user can press the space bar to view and select the next option t ...

  • ADC Soneplex Broadband System - page 213

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-190 © 2000, ADC Telecommunications, Inc. DLP-559 Page 2 of 2 6149-C MPU ALARM LEVELS Equipment/Shelf Alarms =============================================== CGA : CRITICAL GRP MISMATCH: MINOR APU FAIL : MAJOR POWER : MAJOR External Alarms ============================== ...

  • ADC Soneplex Broadband System - page 214

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-191 © 2000, ADC Telecommunications, Inc. DLP-560 Page 1 of 2 DS3 MUX ALARM LEVEL SETTING Summary: This procedure provides instructions for setting DS3 MUX Alarm Levels. Note: A “toggle” field type means the user can press the space bar to view and select the next ...

  • ADC Soneplex Broadband System - page 215

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-192 © 2000, ADC Telecommunications, Inc. DLP-560 Page 2 of 2 DS3MUX ALARM LEVELS Equipment Alarms =========================== BOARD FAIL : MAJOR COMM FAIL : MAJOR PROTECT COMM FAIL: MINOR MUX Facility Alarms =========================== FORCE TO WORKING : MINOR FORCE T ...

  • ADC Soneplex Broadband System - page 216

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-193 © 2000, ADC Telecommunications, Inc. DLP-561 Page 1 of 3 ODS2 MODULE ALARM LEVEL SETTING Summary: This procedure provides instructions for setting ODS2 Alarm Levels. Note: A “toggle” field type means the user can press the space bar to view and select the next ...

  • ADC Soneplex Broadband System - page 217

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-194 © 2000, ADC Telecommunications, Inc. DLP-561 Page 2 of 3 7. Move to the DS1 Facility A larms toggle fields. Select CRITI CAL, MAJOR, M INOR, EVENT, or NOT RPTD for each field that you wish to change. Referenc e : TAP-101 Alarm Troubleshooting Note: Default values ...

  • ADC Soneplex Broadband System - page 218

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-195 © 2000, ADC Telecommunications, Inc. DLP-561 Page 3 of 3 Table 561-1. ODS2 Alarm Level Defaults EQUIPMENT ALARMS ALARM TYPE DEFAULT CONDITION ONLINE OFFLINE BOARD FAIL Major Minor COMM FAIL Major Minor CONFIG MISMATCH Minor Event HSKP1 Minor Event PROTECT COMM FAI ...

  • ADC Soneplex Broadband System - page 219

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-196 © 2000, ADC Telecommunications, Inc. DLP-562 Page 1 of 3 HLX ALARM LEVEL SETTING Summary: This procedure provides instructions for setting HLX Alarm Levels. Note: A “toggle” field type means the user can press the space bar to view and select the next option t ...

  • ADC Soneplex Broadband System - page 220

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-197 © 2000, ADC Telecommunications, Inc. DLP-562 Page 2 of 3 8. Move to the HDSL F acility Alarms toggle fields. Select CRITICAL, MAJ OR, MINOR, EVENT, or NOT RPTD for each field that you wish to change. Referenc e : TAP-101 Alarm Troubleshooting 9. Assign the selecti ...

  • ADC Soneplex Broadband System - page 221

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-198 © 2000, ADC Telecommunications, Inc. DLP-562 Page 3 of 3 Table 562-1. HLX Alarm Level Defaults EQUIPMENT ALARMS CONDITION ALARM TYPE DEFAULT COMM FAIL Major HSKP1 Minor HSKP2 Minor LOOP REVERSAL Event TP/RNG REVERSAL Event PRIMARY POWER Major SECONDARY POWER Major ...

  • ADC Soneplex Broadband System - page 222

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-199 © 2000, ADC Telecommunications, Inc. DLP-563 Page 1 of 2 DLX ALARM LEVEL SETTING Summary: This procedure provides instructions for setting DLX Alarm Levels. Note: A “toggle” field type means the user can press the space bar to view and select the next option t ...

  • ADC Soneplex Broadband System - page 223

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-200 © 2000, ADC Telecommunications, Inc. DLP-563 Page 2 of 2 7. Move to the DS1 Facility A larms toggle fields. Select CRITI CAL, MAJOR, M INOR, EVENT, or NOT RPTD for each field that you wish to change. Referenc e : TAP-101 Alarm Troubleshooting 8. Assign the selecti ...

  • ADC Soneplex Broadband System - page 224

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-201 © 2000, ADC Telecommunications, Inc. DLP-564 Page 1 of 1 CRAFT INTERFACE SYSTEM LOGOFF Summary: This procedure provides instructions for logging off the Craft Interface system. 1. Press CONTROL-D to log off. Note: You will be logged off automatically if a period o ...

  • ADC Soneplex Broadband System - page 225

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-202 © 2000, ADC Telecommunications, Inc. DLP-565 Page 1 of 3 PERFORMANCE MONITORING REPORTS RETRIEVAL Summary: This procedure provides instructions for retrieving DS1 and HDSL 15-Minute PM, Daily PM, and Summary PM reports. Performance Monitoring reports are based on ...

  • ADC Soneplex Broadband System - page 226

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-203 © 2000, ADC Telecommunications, Inc. DLP-565 Page 2 of 3 9448-A PERFORMANCE MONITORING 1. PM Configuration 2. PM Reports Press CONTROL-A For Assistance Figure 565-1. Performance Monitoring Menu 10389-A PERFORMANCE MONITORING REPORTS 1. DS1 PM Reports 2. HDSL PM Re ...

  • ADC Soneplex Broadband System - page 227

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-204 © 2000, ADC Telecommunications, Inc. DLP-565 Page 3 of 3 10391-A DS1 PERFORMANCE MONITORING REPORTS Group: 6 Circuit: 1 Site: LOCAL Report Type: 15-MINUTE Circuit ID: Modify Fields Above To Select Desired Report, Then Press RETURN Figure 565-3. Sample DS1 Performa ...

  • ADC Soneplex Broadband System - page 228

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-205 © 2000, ADC Telecommunications, Inc. DLP-566 Page 1 of 1 CIRCUIT ID DISPLAY Summary: This procedure provides instructions for displaying the Access ID (AID), Circuit ID, and the Unit Type for each module installed in the Soneplex Broadband chassis. Note: Press CON ...

  • ADC Soneplex Broadband System - page 229

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-206 © 2000, ADC Telecommunications, Inc. DLP-567 Page 1 of 2 RLX (OR RXLIOR) TO REPEATER VOLTAGE AND CURRENT TEST Summary: This procedure provides instructions for measuring DC voltage and DC current being supplied by the RLX or RLXIOR module to the T1 span repeater. ...

  • ADC Soneplex Broadband System - page 230

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-207 © 2000, ADC Telecommunications, Inc. DLP-567 Page 2 of 2 14864-A LPBK STAT V - I- I+ V+ LOS BER R L X LOS BER NET LINE + LPBK STAT V - I- I+ V+ LOSW BER R L X ENBL LOS BER NET RESET LINE 11784-A LPBK STAT V - I- I+ V+ LOS BER R L X LOS BER NET LINE I O R Version A ...

  • ADC Soneplex Broadband System - page 231

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-208 © 2000, ADC Telecommunications, Inc. DLP-568 Page 1 of 2 VERSION C HLXC VOLTAGE TO HLXR TEST Summary: This procedure provides instructions for measuring DC voltage and DC current being supplied by the Version C HLXC to the HLXR. The V+, V–, I+, and I– jacks pr ...

  • ADC Soneplex Broadband System - page 232

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-209 © 2000, ADC Telecommunications, Inc. DLP-568 Page 2 of 2 LPBK STAT H L X V - I- I+ V+ L1 L2 HDSL RMT/ HSKP LOSW BER LOSW BER DS1 LOS BER CONT SNR 6769-A Figure 568-1. Version C HLXC Module Front Panel ...

  • ADC Soneplex Broadband System - page 233

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-210 © 2000, ADC Telecommunications, Inc. DLP-569 Page 1 of 1 RLX-EQUIPPED CIRCUIT CROSS-CONNECTS Summary: RLX modules can be configured to supply span power over the DS1 pairs to power the repeater modules. To remove current from the pairs before making cross-connects ...

  • ADC Soneplex Broadband System - page 234

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-211 © 2000, ADC Telecommunications, Inc. DLP-570 Page 1 of 18 RTAU OPERATION Summary: This procedure provides instructions for operating the Remote Test Access Unit (RTAU). The RTAU can be used to drop or insert DS1 signals either toward the network (DS3 interface) or ...

  • ADC Soneplex Broadband System - page 235

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-212 © 2000, ADC Telecommunications, Inc. DLP-570 Page 2 of 18 RTAU STATUS LINE CODE INTRUSIVE TEST D S 1 RX TX 12693-A BIPOLAR ACCESS B8ZS AMI Figure 570-1. RTAU Front Panel 5323-A SYSTEM MAINTENANCE 1. Force/APS Commands 2. Reset/LED Test Commands 3. Execute ACO (Ala ...

  • ADC Soneplex Broadband System - page 236

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-213 © 2000, ADC Telecommunications, Inc. DLP-570 Page 3 of 18 4. Use the arrow or number keys to select Test Access Unit Commands. Press Enter or Return. The RTAU Configuration screen appears, as shown in Figure 570-3 . 14868-A RTAU CONFIGURATION 1. RTAU Unit Configur ...

  • ADC Soneplex Broadband System - page 237

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-214 © 2000, ADC Telecommunications, Inc. DLP-570 Page 4 of 18 7. To start a test, set the Measurement field to ST ART. T he RTAU waits for pattern sync or frame sync (for framed patterns) before beginning measurement (see Figure 570-15 ). After syncing, the test begin ...

  • ADC Soneplex Broadband System - page 238

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-215 © 2000, ADC Telecommunications, Inc. DLP-570 Page 5 of 18 14851-A TEST ACCESS UNIT STATUS/COMMANDS Group: 1 DS1#: 2 Drop Direction Insert Direction ============== ================ Status : NONE NONE Command : TAU Present Status: NO Press CONTROL-A For Assistance F ...

  • ADC Soneplex Broadband System - page 239

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-216 © 2000, ADC Telecommunications, Inc. DLP-570 Page 6 of 18 Table 570-1. RTAU Configuration Fields FIELD TYPE OPTIONS DESCRIPTION DEFAULT EQUIPMENT SETUP FIELDS Current User Toggle O V E R V I E W : T he Cur re n t U s e r f i e l d c an o nly b e s e t to NONE or C ...

  • ADC Soneplex Broadband System - page 240

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-217 © 2000, ADC Telecommunications, Inc. DLP-570 Page 7 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT EQUIPMENT SETUP FIELDS, continued Mode Toggle O V E R V IE W : V a l i d access modes and the resulting configur atio ...

  • ADC Soneplex Broadband System - page 241

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-218 © 2000, ADC Telecommunications, Inc. DLP-570 Page 8 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT EQUIPMENT SETUP FIELDS, continued Mode, continued Toggle SPLTFL SPLTFL indicates a split in both the A and B paths an ...

  • ADC Soneplex Broadband System - page 242

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-219 © 2000, ADC Telecommunications, Inc. DLP-570 Page 9 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT SIGNAL GENERATOR SETUP FIELDS, continued Pattern Type, continued Toggle 2^15-1 2 15 -1 is a 32,767-bit, pseudo-random ...

  • ADC Soneplex Broadband System - page 243

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-220 © 2000, ADC Telecommunications, Inc. DLP-570 Page 10 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT SIGNAL GENERATOR SETUP FIELDS, continued Pattern Type, continued Toggle 1 in 8 Containing strings of 7 sequential 0? ...

  • ADC Soneplex Broadband System - page 244

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-221 © 2000, ADC Telecommunications, Inc. DLP-570 Page 11 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT SIGNAL GENERATOR SETUP FIELDS, continued Loop Code Toggle O VE R V IE W : T h e Mo de f i e l d m u s t b e s e t t ...

  • ADC Soneplex Broadband System - page 245

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-222 © 2000, ADC Telecommunications, Inc. DLP-570 Page 12 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT BIT ERROR SETUP FIELDS OVERV IEW: Bit er rors can be injected by the RTA U using the Bit Error S et Up fields. These ...

  • ADC Soneplex Broadband System - page 246

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-223 © 2000, ADC Telecommunications, Inc. DLP-570 Page 13 of 18 Table 570-1. RTAU Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT BIT ERROR SETUP FIELDS, continued Elapsed Time – ES Display only None Six-digit counter or blank. Blank Elapsed Ti ...

  • ADC Soneplex Broadband System - page 247

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-224 © 2000, ADC Telecommunications, Inc. DLP-570 Page 14 of 18 DS3 MUX RT AU P A TTERN GEN DETECTOR CONTROLLER A B MPU or SCU LINE CARD DS1 TEST SET RX TX BIPOLAR ACCESS RT AU FRONT P ANEL DS3 EQUIPMENT MONITOR SPLIT DS1 F ACILITY 14869-A (OPTIONAL) Figure 570-6. RTAU ...

  • ADC Soneplex Broadband System - page 248

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-225 © 2000, ADC Telecommunications, Inc. DLP-570 Page 15 of 18 DS3 MUX RT AU AB EQUIPMENT (E) [NETWORK] F ACILITY (F) [CUST OMER] CIRCUIT UNDER TEST TEST SIGNAL GENERA TOR TEST SIGNAL GENERA TOR DS3 MUX RT AU AB EQUIPMENT (E) [NETWORK] F ACILITY (F) [CUST OMER] CIRCUI ...

  • ADC Soneplex Broadband System - page 249

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-226 © 2000, ADC Telecommunications, Inc. DLP-570 Page 16 of 18 A END INTEROFFICE F ACILITY CPE INSERT : NETWORK DROP: NETWORK FE 11868-B Z END CPE SPL TE RT AU QRS B = "B" TRANSMISSION P A TH = SIGNAL PRESENCE DETECT OR = TEST SIGNAL GENERA TOR OR UNFRAMED ( ...

  • ADC Soneplex Broadband System - page 250

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-227 © 2000, ADC Telecommunications, Inc. DLP-570 Page 17 of 18 SPL TF INSERT : NETWORK DROP: CUST OMER INSERT : CUST OMER FE QRS A END CPE RT AU INTEROFFICE F ACILITY Z END CPE DROP: NETWORK INSERT : NETWORK INSERT : CUST OMER F E 11870-B SPL TE QRS RT AU OFFICE A OFF ...

  • ADC Soneplex Broadband System - page 251

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-228 © 2000, ADC Telecommunications, Inc. DLP-570 Page 18 of 18 DS3 MUX RT AU A B A B EQUIPMENT (E) [NETWORK] F ACILITY (F) [CUST OMER] CIRCUIT UNDER TEST SIGNAL PRESENCE DETECT OR DS3 MUX RT AU EQUIPMENT (E) [NETWORK] F ACILITY (F) [CUST OMER] CIRCUIT UNDER TEST SIGNA ...

  • ADC Soneplex Broadband System - page 252

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-229 © 2000, ADC Telecommunications, Inc. DLP-571 Page 1 of 2 STREAKER INSTALLATION AND TESTING Summary: This procedure provides instructions for installation and testing of the Streaker module. Note: For a detailed description of Streaker (STK) module use, refer to So ...

  • ADC Soneplex Broadband System - page 253

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-230 © 2000, ADC Telecommunications, Inc. DLP-571 Page 2 of 2 5858-B BATTERY HOLDERS BATT → –48V → VOLTAGE SWITCH S T K 1 1 1 1 I O I O I D S I O I O O M I O M D S O O S M P 4 D Figure 571-1. Streaker Module 5852-D S T K IN OUT IN OUT OUT IN OUT IN -48 GRD LMP TE ...

  • ADC Soneplex Broadband System - page 254

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-231 © 2000, ADC Telecommunications, Inc. DLP-572 Page 1 of 1 VERSION D (OR LATER) HLXC VOLTAGE TO HLXR TEST Summary: This procedure provides instructions for measuring DC voltage and DC current being supplied by the Version D (or later) HLXC to the Version D (or later ...

  • ADC Soneplex Broadband System - page 255

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-232 © 2000, ADC Telecommunications, Inc. DLP-573 Page 1 of 6 HLX LOOPBACK CONFIGURATION Summary: This procedure provides instructions for viewing or editing the loopback configuration for HLXC modules. Note: A “toggle” field type means the user can press the space ...

  • ADC Soneplex Broadband System - page 256

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-233 © 2000, ADC Telecommunications, Inc. DLP-573 Page 2 of 6 HLX CONFIGURATION 1. HLX Unit Configuration 2. Loopback Configuration Press CONTROL-A For Assistance 6765-A Figure 573-1. HLX Configuration Menu HLX LOOPBACK CONFIGURATION Group: 6 Slot: 1 Circuit ID: HLXC A ...

  • ADC Soneplex Broadband System - page 257

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-234 © 2000, ADC Telecommunications, Inc. DLP-573 Page 3 of 6 8113-A HLX LOOPBACK CONFIGURATION Group: 6 Slot: 1 Circuit ID: HLXC Activation Code : 1101001111010011 HLXC Programmable Lpbk : DISABLED HLXR NID Loopback : UNIT SWITCH HLXR Activation Code : 110001110100001 ...

  • ADC Soneplex Broadband System - page 258

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-235 © 2000, ADC Telecommunications, Inc. DLP-573 Page 4 of 6 Table 573-1. HLX Loopback Configuration Fields FIELD TYPE OPTIONS DESCRIPTION DEFAULT Group Toggle 1, 2, 3, 4, 5, 6, or 7 Specifies the module’s group number designated on the chassis. Blank Slot Toggle 1, ...

  • ADC Soneplex Broadband System - page 259

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-236 © 2000, ADC Telecommunications, Inc. DLP-573 Page 5 of 6 Table 573-1. HLX Loopback Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT HLXR NID Loopback Toggle UNIT SWITCH Version E HLXR only: Selects NID setting (enabled) for the HLXR. Version ...

  • ADC Soneplex Broadband System - page 260

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-237 © 2000, ADC Telecommunications, Inc. DLP-573 Page 6 of 6 Table 573-1. HLX Loopback Configuration Fields, continued FIELD TYPE OPTIONS DESCRIPTION DEFAULT Second HRX in system only: HRX2 Activation Code (“Activation Code” is equivalent to “Programmable Code.? ...

  • ADC Soneplex Broadband System - page 261

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-238 © 2000, ADC Telecommunications, Inc. DLP-574 Page 1 of 1 TAU INSTALLATION AND TESTING Summary: This procedure provides instructions for installing the Test A ccess Unit (TAU ) in the chassis and verifying that it is functioning properly. The TAU requires no provis ...

  • ADC Soneplex Broadband System - page 262

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-239 © 2000, ADC Telecommunications, Inc. DLP-575 Page 1 of 5 TAU OPERATION Summary: This procedure provides instructions for Summary: This procedure provides instructions for operating the Test Access Unit (TAU). The TAU can be used to drop or insert DS 1 signals eith ...

  • ADC Soneplex Broadband System - page 263

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-240 © 2000, ADC Telecommunications, Inc. DLP-575 Page 2 of 5 5. Determine the Group number (1, 2, 3, 4, 5, 6, or 7) for the DS1 signal you wish to drop/monitor. At the Group prompt, select the group number. 6. Determine the DS1 number (1 through 4) for the DS1 signal ...

  • ADC Soneplex Broadband System - page 264

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-241 © 2000, ADC Telecommunications, Inc. DLP-575 Page 3 of 5 TAU B8ZS STATUS LINE CODE INTRUSIVE TEST D S 1 RX TX 5842-B Figure 575-1. TAU Module Front Panel 6188-B TEST ACCESS UNIT STATUS/COMMANDS Group: 1 DS1#: 1 Drop Direction Insert Direction ============== ====== ...

  • ADC Soneplex Broadband System - page 265

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-242 © 2000, ADC Telecommunications, Inc. DLP-575 Page 4 of 5 6177-A DS3MUX DS3 NETWORK DS1s CUSTOMER (LOW SPEED MODULES) RX TX TAU : : : : 6178-A DS3MUX DS3 NETWORK DS1s CUSTOMER (LOW SPEED MODULES) RX TX TAU : : : : Figure 575-3a. Drop: None/Insert: Network Figure 57 ...

  • ADC Soneplex Broadband System - page 266

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-243 © 2000, ADC Telecommunications, Inc. DLP-575 Page 5 of 5 6174-A DS3MUX DS3 NETWORK DS1s CUSTOMER (LOW SPEED MODULES) RX TX TAU : : : : 6173-A CUSTOMER (LOW SPEED MODULES) DS3MUX DS3 NETWORK DS1s RX TX TAU : : : : Figure 575-3e. Drop: Network / Insert: Customer Fig ...

  • ADC Soneplex Broadband System - page 267

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-244 © 2000, ADC Telecommunications, Inc. DLP-576 Page 1 of 2 TBOS CHASSIS DAISY-CHAINING Summary: This procedure provides instructions for daisy-chaining one TBOS link to several chassis configured for compressed TBOS. Up to four chassis can be connected in this manne ...

  • ADC Soneplex Broadband System - page 268

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-245 © 2000, ADC Telecommunications, Inc. DLP-576 Page 2 of 2 10387-A ALL OTHER CHASSIS (NO STRAP) LAST CHASSIS IN CHAIN BERG JUMPER JD 13 Note: The default setting is “strapped”. Figure 576-1. Berg Jumper Configuration on MPU for TBOS Linking CHASSIS #1 CHASSIS #4 ...

  • ADC Soneplex Broadband System - page 269

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-246 © 2000, ADC Telecommunications, Inc. ...

  • ADC Soneplex Broadband System - page 270

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-247 © 2000, ADC Telecommunications, Inc. TAD-100 Page 1 of 2 MAINTENANCE PHILOSOPHY Summary: Soneplex maintenance philosophy is built on the collection of system information through inspection of the Soneplex modules themselves, and through software interfaces. Centra ...

  • ADC Soneplex Broadband System - page 271

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-248 © 2000, ADC Telecommunications, Inc. TAD-100 Page 2 of 2 All personnel handling modules should take the following precautions. 1. Keep materials that tend to generate static electricity such as plastics, nylon clothing, and Styrofoam containers away from all modul ...

  • ADC Soneplex Broadband System - page 272

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-249 © 2000, ADC Telecommunications, Inc. TAD-101 Page 1 of 9 SPECIFICATIONS Summary: This TAD shows technical specifications for the Soneplex Broadband system with MPU Version 5 software in Table 101-1 (System Specifications), Table 101-2 (DS3 MUX Power), Table 101-3 ...

  • ADC Soneplex Broadband System - page 273

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-250 © 2000, ADC Telecommunications, Inc. TAD-101 Page 2 of 9 Table 101-1. Soneplex Broadband System (V5) Specifications, continued PARAMETER SPECIFICATION REMARKS DS3 Interface (DS3 MUX) DS3 Input Level +5.7 dBm to –7.3 dBm DS3 Transmit Power Level –1.8 to +5.7 dB ...

  • ADC Soneplex Broadband System - page 274

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-251 © 2000, ADC Telecommunications, Inc. TAD-101 Page 3 of 9 Table 101-1. Soneplex Broadband System (V5) Specifications, continued PARAMETER SPECIFICATION REMARKS Version D and later HLXC Modules Loop Loss < 35 dB @ 196 kHz 135 ohm termination Loop Types Two-pair, ...

  • ADC Soneplex Broadband System - page 275

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-252 © 2000, ADC Telecommunications, Inc. TAD-101 Page 4 of 9 Table 101-1. Soneplex Broadband System (V5) Specifications, continued PARAMETER SPECIFICATION REMARKS Version D and later HLXRs; HLXR 3192 DS1 Interface: Input / Output Signals Per ANSI T1-403 Frequency 1.54 ...

  • ADC Soneplex Broadband System - page 276

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-253 © 2000, ADC Telecommunications, Inc. TAD-101 Page 5 of 9 Table 101-1. Soneplex Broadband System (V5) Specifications, continued PARAMETER SPECIFICATION REMARKS A2 RLX Module Frame Format SF, ESF, SLC96, and unframed Frequency 1.544 Mbps ± 200 bps (130 ppm) Input S ...

  • ADC Soneplex Broadband System - page 277

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-254 © 2000, ADC Telecommunications, Inc. TAD-101 Page 6 of 9 Table 101-1. Soneplex Broadband System (V5) Specifications, continued PARAMETER SPECIFICATION REMARKS RTAU Module DS1 Jack Access Jack Type Bantam Electrical Interface Bipolar Impedance 100 ohms nominal ± 5 ...

  • ADC Soneplex Broadband System - page 278

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-255 © 2000, ADC Telecommunications, Inc. TAD-101 Page 7 of 9 Table 101-2. DS3 MUX Power Characteristics MAX. POWER CONSUMPTION/DISSIPATION MAX. CURRENT DRAIN (AT –48 VDC) 8 watts 166 mA Note: Two DS3 MUXs (one working and one protect) are used per chassis in Broadba ...

  • ADC Soneplex Broadband System - page 279

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-256 © 2000, ADC Telecommunications, Inc. TAD-101 Page 8 of 9 Table 101-5. Broadband Power Characteristics Version D and later HLXCs HLXR CONFIGURATION # OF HRXS IN SYSTEM # OF HLXCS IN CHASSIS MAX. POWER CONSUMPTION MAX. POWER DISSIPATION MAX. CURRENT DRAIN (AT –48 ...

  • ADC Soneplex Broadband System - page 280

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-257 © 2000, ADC Telecommunications, Inc. TAD-101 Page 9 of 9 Table 101-6. Broadband (V5) Power Characteristics with ODS2 Modules NO. OF ODS2S IN CHASSIS MAX. POWER CONSUMPTION/DISSIPATION MAX. CURRENT DRAIN (AT –48 VDC) 1 4 watts 83 mA 14 84 watts 1.8 amps Note: Pow ...

  • ADC Soneplex Broadband System - page 281

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-258 © 2000, ADC Telecommunications, Inc. TAD-102 Page 1 of 5 LOOPBACK PROCESS DESCRIPTION Summary: The HDSL loopback process is similar to other T1 intelligent repeater methods. For Version D and later HLX modules, the HLX C loopback is like an intelligent office repe ...

  • ADC Soneplex Broadband System - page 282

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-259 © 2000, ADC Telecommunications, Inc. TAD-102 Page 2 of 5 The inband control code sequences will be recognized either in DS1 framed format (SF or ESF framing) or in unframed format. Table 102-1 contains a summary of loopback time-out and control codes. N o tice tha ...

  • ADC Soneplex Broadband System - page 283

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-260 © 2000, ADC Telecommunications, Inc. TAD-102 Page 3 of 5 Disarmed State The normal operation mode is the disarmed state. Although each HDS L unit is transparent to the data flow, each monitors the inband data flow and the ESF data link for the arming sequence. The ...

  • ADC Soneplex Broadband System - page 284

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2- 261 © 2000, ADC Telecommunications, Inc. TAD-102 Page 4 of 5 Transition from Armed to Loopup State A sp ecific HDSL unit moves from the armed state into the loopup state when commanded by an inband control code sequence. There is a unique 16-bit activation control co ...

  • ADC Soneplex Broadband System - page 285

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-262 © 2000, ADC Telecommunications, Inc. TAD-102 Page 5 of 5 Loopup State The selected HDSL unit provides continuous loopup of the DS1 signal in the loopup state. At the same time, the data flow is monitored for the inband deactivation sequence, the inband disarming s ...

  • ADC Soneplex Broadband System - page 286

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-263 © 2000, ADC Telecommunications, Inc. TAD-103 Page 1 of 3 PERFORMANCE MONITORING REPORTING LOCATIONS Summary: Performance Monitoring (PM) information for both DS1 and HDSL is found on the MPU’s main menu under Performance Monitoring. The following information is ...

  • ADC Soneplex Broadband System - page 287

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-264 © 2000, ADC Telecommunications, Inc. TAD-103 Page 2 of 3 G = D S1 errors at HL XR are reported as T1-1-X -X-2 NEND PM and alarms. Report measures the actual D S1 performance as received on transmission from CSU H . - OR - DS1 errors at HLX R are reported as T1-1-X ...

  • ADC Soneplex Broadband System - page 288

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-265 © 2000, ADC Telecommunications, Inc. TAD-103 Page 3 of 3 Soneplex Optical DS2 (QLX) System A 1 H 1 CSU CSU QLX B 1 G 1 14862-A NETWORK DS2 DS1 QLX DS1 Figure 103-3. Location of Critical Alarm Points on Soneplex QLX System A 1 = External CSU that will inject P RM ( ...

  • ADC Soneplex Broadband System - page 289

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-266 © 2000, ADC Telecommunications, Inc. TAD-104 Page 1 of 11 TBOS INTERFACE DESCRIPTION Summary: This section provides information for operating the Soneplex Broadband system using a Telemetry Byte Oriented Serial (TBOS) remote interface. The TB OS interface provides ...

  • ADC Soneplex Broadband System - page 290

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-267 © 2000, ADC Telecommunications, Inc. TAD-104 Page 2 of 11 Table 104-2 (TBOS Abbreviations and Acronyms) and Table 104-3 (Expanded Scan Displays 2 Through 8 Definitions ) list the definitions of the abbreviations used in the TBOS displays shown in Figure 104-1 (Exp ...

  • ADC Soneplex Broadband System - page 291

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-268 © 2000, ADC Telecommunications, Inc. TAD-104 Page 3 of 11 Table 104-1. DS1 Signal Routing DS1 SIGNAL GROUP- SLOT NUMBER DS1 SIGNAL GROUP- SLOT NUMBER DS1 SIGNAL GROUP- SLOT NUMBER DS1 SIGNAL GROUP- SLOT NUMBER 1 1-1 8 2-4 15 4-3 22 6-2 2 1-2 9 3-1 16 4-4 23 6-3 3 ...

  • ADC Soneplex Broadband System - page 292

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-269 © 2000, ADC Telecommunications, Inc. TAD-104 Page 4 of 11 Table 104-3. Expanded Scan Displays 2 Through 8 Definitions DISPLAY MODULE TYPE DESCRIPTION Lx 1 EQPT Fail QLX Module Fail, MPU COMM Fail, Laser Degrade, DS1 TX LOS or (SISTER COMM Fail and not SISTER MPU C ...

  • ADC Soneplex Broadband System - page 293

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-270 © 2000, ADC Telecommunications, Inc. TAD-104 Page 5 of 11 CRITICAL ALARM MAJOR ALARM MINOR ALARM REMOTE ALARM POWER ALARM MPU FAIL 12345678 HSKP 1 ALARM HSKP 2 ALARM HSKP 3 ALARM HSKP 4 ALARM HSKP 5 ALARM HSKP 6 ALARM HSKP 7 ALARM HSKP 8 ALARM 91 01 11 21 31 41 51 ...

  • ADC Soneplex Broadband System - page 294

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-271 © 2000, ADC Telecommunications, Inc. TAD-104 Page 6 of 11 L1 EQPT FAIL L2 EQPT FAIL L3 EQPT FAIL L4 EQPT FAIL L1 EQPT FAIL RMT L2 EQPT FAIL RMT L3 EQPT FAIL RMT L4 EQPT FAIL RMT 12345678 L1 LINK ALM L2 LINK ALM L3 LINK ALM L4 LINK ALM L1 RMT LINK ALM L2 RMT LINK A ...

  • ADC Soneplex Broadband System - page 295

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-272 © 2000, ADC Telecommunications, Inc. TAD-104 Page 7 of 11 HS EQ HS UNEQ HS IS HS OSS HS PROT HS UNPROT HSW RESET HSP RESET 12345678 SW TO HSW SW TO HSP HS NET LPBK ON HS NET LPBK OF F HS A NET LPBK ON HS A NET LPBK OF F HS B NET LPBK ON HS B NET LPBK OF F 91 01 11 ...

  • ADC Soneplex Broadband System - page 296

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-273 © 2000, ADC Telecommunications, Inc. TAD-104 Page 8 of 11 L1 EQ ON L1 EQ OFF L2 EQ ON L2 EQ OFF L3 EQ ON L3 EQ OFF L4 EQ ON L4 EQ OFF 12345678 D1 IS D1 OOS D2 IS D2 OOS D3 IS D3 OOS D4 IS D4 OOS 91 01 11 21 31 41 51 6 D1 LCL LPBK ON D1 LCL LPBK OFF D2 LCL LPBK ON ...

  • ADC Soneplex Broadband System - page 297

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-274 © 2000, ADC Telecommunications, Inc. TAD-104 Page 9 of 11 Table 104-4. Compressed TBOS Scan Display Definitions DISPLAY UNIT TYPE DESCRIPTION Critical Alarm Shelf Critical Alarm shelf summary Major Alarm Shelf Major Alarm shelf summary Minor Alarm Shelf Minor Alar ...

  • ADC Soneplex Broadband System - page 298

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-275 © 2000, ADC Telecommunications, Inc. TAD-104 Page 10 of 11 CRITICAL ALARM MAJOR ALARM MINOR ALARM REMOTE FAILURE POWER ALARM MPU ALARM HSW EQPT ALM HSP EQPT ALM 12345678 HSW FAC ALM HSP FAC ALM MXW EQPT ALM MXP EQPT ALM MXW FAC ALM MXP FAC ALM D1-1 L/R ALARM D1-2 ...

  • ADC Soneplex Broadband System - page 299

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-276 © 2000, ADC Telecommunications, Inc. TAD-104 Page 11 of 11 HSKP 6-2 RMT ALM HSKP 6-3 RMT ALM HSKP 6-4 RMT ALM HSKP 7-1 RMT ALM HSKP 7-2 RMT ALM HSKP 7-3 RMT ALM HSKP 7-4 RMT ALM L1-1 LCL ALARM 12345678 L1-2 LC L ALARM L1-3 LC L ALARM L1-4 LC L ALARM L2-1 LC L ALAR ...

  • ADC Soneplex Broadband System - page 300

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-277 © 2000, ADC Telecommunications, Inc. TAD-105 Page 1 of 8 TRANSACTION LANGUAGE 1 (TL1) INTERFACE DESCRIPTION Summary: This TAD describes the commands used to operate the Soneplex Loop Extender through a terminal using Transaction Language 1 (TL1). All operations ar ...

  • ADC Soneplex Broadband System - page 301

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-278 © 2000, ADC Telecommunications, Inc. TAD-105 Page 2 of 8 The routing block contains a target identifier parameter with parameter name Target Identification (TID). The TID may be any valid simple or compound TL1 identifier or text string, and is limited to 20 A SCI ...

  • ADC Soneplex Broadband System - page 302

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-279 © 2000, ADC Telecommunications, Inc. TAD-105 Page 3 of 8 It should be noted that if no data block parameters are required for a command, the colon separating the correlation block from the data block may be omitted. Trailing commas in the data block (that is, comm ...

  • ADC Soneplex Broadband System - page 303

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-280 © 2000, ADC Telecommunications, Inc. TAD-105 Page 4 of 8 The text block contains additional information that is specific to the input command. No parameter grouping is allowed in output. No null defaults unless specified in response syntax description. The end of ...

  • ADC Soneplex Broadband System - page 304

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-281 © 2000, ADC Telecommunications, Inc. TAD-105 Page 5 of 8 Autonomous Message Syntax Autonomous messages are used to report alarms, events, and reports. The format is the same as the full response except the identification of output is replaced by: <ALMCDE>^&l ...

  • ADC Soneplex Broadband System - page 305

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-282 © 2000, ADC Telecommunications, Inc. TAD-105 Page 6 of 8 Table 105-1. TL1 Commands COMMAND DESCRIPTION General System Commands REPT-INITZN Report Initialization REPT-STAT Report Status RTRV-HDR Retrieve header SET-DAT Set system time and date SET-SID Set system ID ...

  • ADC Soneplex Broadband System - page 306

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-283 © 2000, ADC Telecommunications, Inc. TAD-105 Page 7 of 8 Table 105-1. TL1 Commands, continued COMMAND DESCRIPTION TL1 Security Commands ACT-USER Logon a user to port CANC-USER Logoff a user from port DLT-SECU-USER Remove user ID from system ED-SECU-CMD Change the ...

  • ADC Soneplex Broadband System - page 307

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-284 © 2000, ADC Telecommunications, Inc. TAD-105 Page 8 of 8 Table 105-1. TL1 Commands, continued COMMAND DESCRIPTION TEST ACCESS COMMANDS CONN-TACC-T1 Connect Test Access T1 DISC-TACC Disconnect Test Access CHG-ACCMD-T1 Change Access Mode T1 CHG-TSTSIG-T1 Change Test ...

  • ADC Soneplex Broadband System - page 308

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-285 © 2000, ADC Telecommunications, Inc. TAD-106 Page 1 of 2 ACCESS IDENTIFIER Summary: Circuits displayed in the Craft Interface are identified by the Access Identifier (AID). Figure 106-1 sho w s an example of a circuit w ith descriptions of each part of the A I D . ...

  • ADC Soneplex Broadband System - page 309

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-286 © 2000, ADC Telecommunications, Inc. TAD-106 Page 2 of 2 Table 106-1. DS1 Signal Routing DS1 SIGNAL GROUP- SLOT NUMBER DS1 SIGNAL GROUP- SLOT NUMBER DS1 SIGNAL GROUP- SLOT NUMBER DS1 SIGNAL GROUP- SLOT NUMBER 1 1-1 8 2-4 15 4-3 22 6-2 2 1-2 9 3-1 16 4-4 23 6-3 3 1 ...

  • ADC Soneplex Broadband System - page 310

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-287 © 2000, ADC Telecommunications, Inc. TAP-101 Page 1 of 13 ALARM TROUBLESHOOTING Summary: This TAP describes the various alarm screens in the Craft Interface. An accurate diagnosis of the Active Alarms or Alarm History screens allows you to determine where the trou ...

  • ADC Soneplex Broadband System - page 311

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-288 © 2000, ADC Telecommunications, Inc. TAP-101 Page 2 of 13 Identifier • “EQPT-XXXY” identifi es modules within the chassis where XXX represents the t ype of module (MPU, LIU, MXW, MXP, or EXT), and “#” represents the number of the Soneplex chassis in the ...

  • ADC Soneplex Broadband System - page 312

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-289 © 2000, ADC Telecommunications, Inc. TAP-101 Page 3 of 13 The Circuit ID column displays the circuit identifier or facility name of the circuit in trouble. Reference: DLP-532 DLX Configuration Reference: DLP-531 HLX Configuration Reference: DLP-530 ODS2 Module Con ...

  • ADC Soneplex Broadband System - page 313

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-290 © 2000, ADC Telecommunications, Inc. TAP-101 Page 4 of 13 6675-B ACTIVE ALARMS Legend: Access ID=Identifier[-]Shelf-Grp-Slot[-Site(1=Lcl,2=Rmt) | -Loop(1=Lp 1,2=Lp 2)] Access ID Locn Circuit ID Condition Status ACO ---------------- ---- -------------------- ------ ...

  • ADC Soneplex Broadband System - page 314

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-291 © 2000, ADC Telecommunications, Inc. TAP-101 Page 5 of 13 ALARM HISTORY Legend: Access ID=Identifier[-]Shelf-Grp-Slot[-Site(1=Lcl,2=Rmt) | -Loop(1=Lp 1,2=Lp 2)] Date Time Access ID Locn Circuit ID Condition St -------- -------- ---------------- ---- -------------- ...

  • ADC Soneplex Broadband System - page 315

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-292 © 2000, ADC Telecommunications, Inc. TAP-101 Page 6 of 13 T1-1-7-2-1 Shelf Number Group Number: 1, 2, 3, 4, 5, 6, or 7 Site or Loop Number: 1 (Local or HDSL Loop 1) or 2 (Remote or HDSL Loop 2) Slot Number: 1, 2, 3, or 4 Circuit Identifier: (T1, T2, T3 or HDSL) CI ...

  • ADC Soneplex Broadband System - page 316

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-293 © 2000, ADC Telecommunications, Inc. TAP-101 Page 7 of 13 Table 101-1. Alarm Descriptions/Conditions MPU ALARMS, AID = EQPT-MPU# CONDITION DESCRIPTION GRP 1 MISMATCH Invalid card type combination in group 1 GRP 2 MISMATCH Invalid card type combination in group 2 G ...

  • ADC Soneplex Broadband System - page 317

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-294 © 2000, ADC Telecommunications, Inc. TAP-101 Page 8 of 13 Table 101-1. Alarm Descriptions/Conditions, continued DS3 MUX ALARMS, AID = EQPT-MXW#, EQPT-MXP# CONDITION DESCRIPTION BOARD FAIL Fatal hardware or software error COMM FAIL MPU unable to communicate with DS ...

  • ADC Soneplex Broadband System - page 318

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-295 © 2000, ADC Telecommunications, Inc. TAP-101 Page 9 of 13 Table 101-1. Alarm Descriptions/Conditions, continued HLXC ALARMS, AID = EQPT-LIU# CONDITION DESCRIPTION BOARD FAIL Fatal hardware or software error COMM FAIL MPU unable to communicate with HLXC HLXR INCOMP ...

  • ADC Soneplex Broadband System - page 319

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-296 © 2000, ADC Telecommunications, Inc. TAP-101 Page 10 of 13 Table 101-1. Alarm Descriptions/Conditions, continued DLX ALARMS, AID = EQPT-LIU# CONDITION DESCRIPTION COMM FAIL MPU unable to communicate with DLX DLX ALARMS, AID = T1 CONDITION DESCRIPTION LOOPED BACK S ...

  • ADC Soneplex Broadband System - page 320

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-297 © 2000, ADC Telecommunications, Inc. TAP-101 Page 11 of 13 KEY NEND means "at the HLXC, looking towar d the customer (HLXR)." FEND means "at the HLXR, looking towar d the network (HLXC)." REPC means "at the HRX, looking towar d the custome ...

  • ADC Soneplex Broadband System - page 321

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-298 © 2000, ADC Telecommunications, Inc. TAP-101 Page 12 of 13 KEY NEND means "PM information collected directly from incoming T1 signals, both at local and remote sites". 10455-A NEND T1 T1 DLX DSX DS1 DS1 DS1 DS1 NEND TO NETWORK TO CUST OMER LOCAL (SITE = ...

  • ADC Soneplex Broadband System - page 322

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-299 © 2000, ADC Telecommunications, Inc. TAP-101 Page 13 of 13 KEY NEND means "PM information collected directly fr om incoming T1 signals, both at local and remote sites". FEND means "ESF PM information collected at the opposite end of spans fr om the ...

  • ADC Soneplex Broadband System - page 323

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-300 © 2000, ADC Telecommunications, Inc. TAP-102 Page 1 of 11 PERFORMANCE MONITORING REPORTS DESCRIPTION The Craft Interface provides 15-Minute Performance Monitoring (PM), Daily PM, and Summary PM reports when you select Performance Monitoring at the Main Menu. Perfo ...

  • ADC Soneplex Broadband System - page 324

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-301 © 2000, ADC Telecommunications, Inc. TAP-102 Page 2 of 11 No t e : In the DS1 Performance Reports screens, Figure 102-1 (DS1 15-Minute), Figure 102-2 (DS1 Daily), Figure 102-3 (DS1 Summary), NE (Near End) and FE (Far End) apply to the entire time period (e.g., 00: ...

  • ADC Soneplex Broadband System - page 325

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-302 © 2000, ADC Telecommunications, Inc. TAP-102 Page 3 of 11 Table 102-1. DS1 Mon Type Descriptions MON TYPE MEANING LOCATION DESCRIPTION CVL Code Violation Line NEND Count of Bipolar Violations (BPV) and excessive zeros (EXZ) in the DS1 signal. Note: The maximum rat ...

  • ADC Soneplex Broadband System - page 326

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-303 © 2000, ADC Telecommunications, Inc. TAP-102 Page 4 of 11 Table 102-1. DS1 Mon Type Descriptions, continued MON TYPE MEANING LOCATION DESCRIPTION UASP Unavailable Second Path NEND A count of second(s) in which the DS1 signal is not available. A signal becomes unav ...

  • ADC Soneplex Broadband System - page 327

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-304 © 2000, ADC Telecommunications, Inc. TAP-102 Page 5 of 11 Table 102-2. HDSL Mon Type Descriptions MON TYPE MEANING LOCATION DESCRIPTION FCP Failure Count Path NEND, FEND, REPC, REPR, CRP, RRP* Count of Loss Of Sync Word (LOSW) failures on the HDSL loop. CVP Code V ...

  • ADC Soneplex Broadband System - page 328

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-305 © 2000, ADC Telecommunications, Inc. TAP-102 Page 6 of 11 6651-B DS1 PERFORMANCE MONITORING REPORTS Group: 6 Circuit: 1 Site: LOCAL Report Type: 15-MINUTE Circuit ID: FCP SESL ESP SASP FCP-FE ESP-FE CSSP-FE CVL LOSS SESP AISSP ESL-FE SESP-FE SEFSP-FE PERIOD STATUS ...

  • ADC Soneplex Broadband System - page 329

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-306 © 2000, ADC Telecommunications, Inc. TAP-102 Page 7 of 11 6653-B FCP SESL ESP SASP FCP-FE ESP-FE CSSP-FE CVL LOSS SESP AISSP ESL-FE SESP-FE SEFSP-FE PERIOD STATUS ESL CVP UASP CVP-FE UASP-FE ======== =========== ======= ======= ======= ======= ======== ======= === ...

  • ADC Soneplex Broadband System - page 330

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-307 © 2000, ADC Telecommunications, Inc. TAP-102 Page 8 of 11 HDSL PERFORMANCE MONITORING REPORTS Group: 1 Circuit: 2 Loop: 1 Report Type: DAILY Circuit ID: Page 2 of 9 Press CONTROL-A for Assistance 11391-A ======== ==== ===== ======== ======= ======= ======= ======= ...

  • ADC Soneplex Broadband System - page 331

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-308 © 2000, ADC Telecommunications, Inc. TAP-102 Page 9 of 11 KEY NEND means "PM information collected directly from incoming T1 signals, both at local and remote sites." FEND means "ESF PRM information collected at the opposite ends of spans from the a ...

  • ADC Soneplex Broadband System - page 332

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-309 © 2000, ADC Telecommunications, Inc. TAP-102 Page 10 of 11 KEY NEND means "PM information collected directly from incoming T1 signals, both at local and remote sites". 10455-A NEND T1 T1 DLX DSX DS1 DS1 DS1 DS1 NEND TO NETWORK TO CUST OMER LOCAL (SITE = ...

  • ADC Soneplex Broadband System - page 333

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-310 © 2000, ADC Telecommunications, Inc. TAP-102 Page 11 of 11 KEY NEND means "PM information collected directly fr om incoming T1 signals, both at local and remote sites". FEND means "ESF PM information collected at the opposite end of spans fr om the ...

  • ADC Soneplex Broadband System - page 334

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-311 © 2000, ADC Telecommunications, Inc. TAP-103 Page 1 of 1 LOCAL CRAFT INTERFACE CONNECTION TROUBLESHOOTING This TAP describes how to troubleshoot local Craft Interface connections. 1. Verify that you have the correct cable and connectors for the port you intend to ...

  • ADC Soneplex Broadband System - page 335

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-312 © 2000, ADC Telecommunications, Inc. TAP-104 Page 1 of 3 DUAL REPEATER INCOMPATIBILITY DIAGNOSIS Summary: This TAP describes how to diagnose dual repeater software (MPU V5.2) incompatibilities for HLXC s, HLXR s, and HRXs; and also describes how they are reported. ...

  • ADC Soneplex Broadband System - page 336

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-313 © 2000, ADC Telecommunications, Inc. TAP-104 Page 2 of 3 HRX2 An incompatible HRX 2 is a Version A H RX that has another H RX between it and the HLXC. This is diagnosed by the HRX1. As a result, systems with two incompatible HRXs cannot be diagnosed. The H LXC wil ...

  • ADC Soneplex Broadband System - page 337

    ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance 2-314 © 2000, ADC Telecommunications, Inc. TAP-104 Page 3 of 3 Table 104-1. Dual Repeater Compatibility Indicators UNIT TYPE INCOMPATIBILITY CORRUPTED HLXC* HRX1** HRX2** HRX3 HLXR*** INDICATOR SERIAL NUMBER NO INCOMPATIBILITIES New -- -- -- New None None New -- -- -- O ...

  • ADC Soneplex Broadband System - page 338

    GENERAL INFORMATION ...

  • ADC Soneplex Broadband System - page 339

    ADCP-61-471 • Issue 4 • June 2000 • Section 3: General Information Page 3-1  2000, ADC Telecommunications, Inc. SECTION 3: GENERAL INFORMATION Content Page 1 WARRANTY/SOFTWARE ............................................................... 3-1 2 REPAIR/ADVANCE REPLACEMENT POLICY ................................................... 3-1 3 REP ...

  • ADC Soneplex Broadband System - page 340

    ADCP-61-471 • Issue 4 • June 2000 • Section 3: General Information Page 3-2  2000, ADC Telecommunications, Inc. 3 REPAIR CHARGES If the defect and the necessary repairs are covered by warranty, Buyer’s only obligation is the payment of all transportation and associated costs in returning the defective Product to the location designated b ...

  • ADC Soneplex Broadband System - page 341

    ADCP-61-471 • Issue 4 • June 2000 • Section 3: General Information Page 3-3 6 CUSTOMER INFORMATION AND ASSISTANCE For customers wanting information on ADC products or help in using them, ADC offers the services listed below. To obtain any of these services by telephone, first dial the central ADC telephone number, then dial the extension prov ...

  • ADC Soneplex Broadband System - page 342

    www .adc.com ...

Производитель ADC Категория Network Router

Документы, которые мы получаем от производителя устройства ADC Soneplex Broadband System мы можем разделить на несколько групп. Это в частности:
- технические чертежи ADC
- инструкции обслуживания Soneplex Broadband System
- паспорта изделия ADC
- информационные брошюры
- энергетические этикетки ADC Soneplex Broadband System
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания ADC Soneplex Broadband System.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа ADC Soneplex Broadband System, инструкции обслуживания, короткие инструкции или инструкции пользователя ADC Soneplex Broadband System. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия ADC Soneplex Broadband System.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства ADC Soneplex Broadband System, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании ADC Soneplex Broadband System пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей ADC Soneplex Broadband System.

Полная инструкция обслуживания ADC, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией ADC Soneplex Broadband System - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания ADC Soneplex Broadband System, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся ADC Soneplex Broadband System, которое найдем в данном документе
3. Советы по использованию основных функций устройства ADC Soneplex Broadband System - которые должны облегчить нам первые шаги во время использования ADC Soneplex Broadband System
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем ADC Soneplex Broadband System
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра ADC Soneplex Broadband System в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся ADC Soneplex Broadband System?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с ADC Soneplex Broadband System, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с ADC Soneplex Broadband System со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)