-
Edimax Technology ES-3124RE+ - page 1
24-Port Fast/Gigabit Ethernet Smart Switch (VLAN, T runking, QoS) ES-5224R+ ES-5224RF+ ES-5224RE+ ES-3124RE+ User ’ s Manual ...
-
Edimax Technology ES-3124RE+ - page 2
1 FCC COMPLIANCE ST A TEMENT This equipment has been tested and found to comply with the limits of a Class A computing devi ces, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful inte rference. This equipment generates, uses and can radiate radio frequency ener gy and, if not installed ...
-
Edimax Technology ES-3124RE+ - page 3
2 Content 1. Intr oduction ......................................... 3 2. Featur es & Specifications ................... 4 3. Package Contents................................. 6 4. Hardwar e Description ......................... 7 5. Advance Smart Function Setting ..... 9 5.1 Main Manu....................................... 11 5.2 Switch S t at ...
-
Edimax Technology ES-3124RE+ - page 4
3 1. Intr oduction Congratulations on your purch ase of this Fast/Gigabit Ethernet Smart Switch. This high performance smart switch provides Ethernet ports to segment network traf fics, extend Ethernet connection distance, and convert data packets between dif ferent transmission speeds. This switch utilizes stored-and-f orward switching architectur ...
-
Edimax Technology ES-3124RE+ - page 5
4 2. Featur es & Specifications Features Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet (IEEE802.3z, IEEE802.3ab for Gigabit switch) Provides S tore-and-Forward architecture and full wire speed filtering and forwarding rates 10/100Mbps Ports support full/half duplex modes and auto-negotiation Provides two Fast Et ...
-
Edimax Technology ES-3124RE+ - page 6
5 Specifications S t andards: IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.1Q, IEEE802.1p 10/100Mbps Ports: RJ-45 × 24 Expansion Slot Option (Fast Ethernet Switch): ♦ 10/100Mbps UTP connector (RJ-45) ♦ 100M Fiber SC/ST connector (multi/single m ode) Expansion Slot Option (Gigabit Ethernet Switch only): ♦ 1000/100/1 ...
-
Edimax Technology ES-3124RE+ - page 7
6 3. Package Contents Packing list Check the contents of your package for following parts: One Fast/Gigabit Ethernet Smart Switch One User's manual One Power cord One RS-232 Cable If any of the items are missing or damaged, please contact your local dealer . CONSOLE 24-port Fast Ethernet Smart Sw itch power ...
-
Edimax Technology ES-3124RE+ - page 8
7 4. Hardwar e Description This section describes the h ardware features of this Fast/Gigabit Ethernet Sm art Switch. For easier management and control of the switch, familiari ze yourself with its display indicators and ports. All LEDs ar e located on the front panel of the switch. They serve the purpos e of monitoring the operation and performanc ...
-
Edimax Technology ES-3124RE+ - page 9
8 Operating Environment This smart switch must be insta lled and operated within the limits of the specified operating temperature and hum idity (see previous section on Specifications ). Do not place objects on top of the unit or obstruct any vents at the sides of the unit. Do not position the unit near any heating source such as heaters, radiator ...
-
Edimax Technology ES-3124RE+ - page 10
9 5. Advance Smart-Function Setting This smart switch provides a dvance features, which of fers you more flexibility in setting up your network. The following section explains how to set up the VLAN, T runking, Port speed, Full/Half duplex modes and QoS. Before using advance Configuration Connect to PC Attach a RS-232 serial cable 9-pin male connec ...
-
Edimax Technology ES-3124RE+ - page 11
10 4. Adjust the settings of the communication port. 4.1 Select the using by connect interface such as COM1,COM2 4.2 Select the Bits per second at “9600 ” 4.3 Set the flow control value as “None”. ...
-
Edimax Technology ES-3124RE+ - page 12
11 5.1 Main Manu Once you have powered on th e swtich, it will boot up automatically and the welcome window will ask you to enter user name and password. If this is your first time to log into the configuration program, then the default user name is “admin” with default password “123”. ...
-
Edimax Technology ES-3124RE+ - page 13
12 After you have entered the correct user name and password, you will have access to the system configuration program. The console port will display the Main Menu as follows. Switch S tatic Configuration : Configure the switch. Such as port speed and duplex, trunk configure, VLAN, MISC and QoS. Reboot Switch : Restart the system or configure the s ...
-
Edimax Technology ES-3124RE+ - page 14
13 5.2 Switch S tatic Configuration There are six items to select: Port Configuration: Configure the port stat e, auto negotiation, speed/duplex and flow control. T runk Configuration: Configure the trunk group. VLAN Configuration: Configure the VLAN group. Misc Configuration: Display the firmware version, change user name and password. Priority Co ...
-
Edimax Technology ES-3124RE+ - page 15
14 5.2.1 Port Configuration In this configuration, you can set the status of each port. Enable : Press Space key to enable or disable this port. “Y es” means the port is enable “No” means the port is disable Auto : Y ou can enable or disable the auto-negotiation of each port. Press Space key to choose items as follows: AUTO : enable auto-ne ...
-
Edimax Technology ES-3124RE+ - page 16
15 Note: If the trunk group exists, you ca n see it (ex: TRK1, TRK2 etc.) after port 26, and you can configure all of the items as above. Action-> <Quit>: Exit this menu and return to the previous menu. <Edit>: Configure all items. After finished configure, press Ctrl+A to go back action menu line. <Save>: Save all configure va ...
-
Edimax Technology ES-3124RE+ - page 17
16 5.2.2 Trunk Configuration There are seven trunk groups to c onfigure. Y ou can arbitrarily select up to four ports from port 1 ~ port 24 or port 25 ~ port 26 to build a trunk group. Configure a trunk group as the following steps: 1. Select < Edit > on actions menu and then press Space key to configure the member ports of each trunk group. ...
-
Edimax Technology ES-3124RE+ - page 18
17 5.2.3 VLAN Configuration A V irtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traf fic so that only members of the VLAN receive traf fic from the same VLAN members. Basi cally , creating a VLAN from a switch is logically equivalent of reconnecting a group of network devices to ano ...
-
Edimax Technology ES-3124RE+ - page 19
18 5.2.3.1 VLAN Configure In this menu, you can set VLAN mode as port-based VLAN or 802.1Q VLAN or just disable this function. ...
-
Edimax Technology ES-3124RE+ - page 20
19 If the VLAN mode is 802.1Q VLAN, you can set PVID (port VID) in the same menu, too. PVID (Port VID) : Set the port VLAN ID that will be assigned to untagged traf fic on a given port. This feature is useful for accommodating devices that you wa nt to participate in the VLAN but that don’t support taggin g. This sm art switch allows you to set o ...
-
Edimax Technology ES-3124RE+ - page 21
20 5.2.3.2 Cr eate a VLAN Gr oup Create a VLAN group and confi gure tagged/untagged member ports to it. Create Port-Based VLAN 1. VLAN Name: T ype a name for the new VLAN (ex: V1). 2. Grp ID: In port-based VLAN mode , this item means VLAN group ID. The group ID range is 1 ~ 26. 3. Member: Press Space key to choose VLAN members. There are two ty ...
-
Edimax Technology ES-3124RE+ - page 22
21 Create 802.1Q VLAN 1. VLAN NAME : T ype a name for the new VLAN (ex: V2). 2. VLAN ID : The VLAN ID range is 1 ~ 4094, and it’ s default VLAN group is 1.Y ou can set up to 256 VLAN groups. 3. Member : Press Space key to c hoose VLAN member . There are three types to selected in 802.1Q VLAN m ode: a. NO : this port is NOT the m ember of this ...
-
Edimax Technology ES-3124RE+ - page 23
22 5.2.3.3 Edit / Delete a VLAN Gr oup In this menu, you can see all the VLAN groups and edit or delete a VLAN group as following steps: 1. Press <Edit> or <Delete> item. 2. Choose the VLAN group that you want to edit or delete and then press Enter . 3. Y ou can modify the mem ber port as tagged or un-tagged and remove some m ember port ...
-
Edimax Technology ES-3124RE+ - page 24
23 5.2.4 Misc Configuration Display the firmware version, change user name and password. 5.2.4.1 SW version This menu shows the firmware version. Press ESC key to return to the previous menu. ...
-
Edimax Technology ES-3124RE+ - page 25
24 5.2.4.2 Change Username 1. Press <Edit> 2. T ype a new username. 3. Press Ctrl+A to go back to actions menu line. 4. Press <Save> to save configure. 5.2.4.3 Change User Passwor d In this menu, you can change login password. ...
-
Edimax Technology ES-3124RE+ - page 26
25 5.2.5 Priority Configuration In this menu, you can choose to set the priority queues of each port. Select the Port S tatic Priority option and you will see the following menu. Y ou can set the priority as High or Low for each port. When packets are buf fered in th is switch, the ports with high priority will have precedence over the ports with l ...
-
Edimax Technology ES-3124RE+ - page 27
26 5.3 Reboot Switch Restart the system or configure the switch to default value. 5.3.1 Default Press “y” to reset this switch to default configuration. ...
-
Edimax Technology ES-3124RE+ - page 28
27 5.3.2 Restart Reboot the switch in software reset. ...
-
Edimax Technology ES-3124RE+ - page 29
28 6. T roubleshooting 1. Power LED is not lit Check if the power cord is properly connected to the power outlet and the switch. Make sure the power switch at the rear panel is turned ON. 2. Link LED is not lit when connected to the network device (1) Make sure the power switch of the network device is turned on (2) Check if the network cable is pr ...
У вас вопрос, касающийся Edimax Technology ES-3124RE+?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Edimax Technology ES-3124RE+, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Edimax Technology ES-3124RE+ со всей вероятностью он захочет поделиться методом ее решения.