Русский dropdown-ico

Инструкция обслуживания American Dish Service Vision C3

78 страниц 1.38 mb
Скачать

Перейти на страницу of 78

Summary
  • American Dish Service Vision C3 - page 1

    Satellite T elevision KVH T racV ision ® C3 owner’ s manual • Installation Instructions • User’ s Guide • T echnical Manual A Guide to T racV ision C3 ...

  • American Dish Service Vision C3 - page 2

    54-0159 Addendum to Re v . G T racVision C3 Owner’ s Manual Addendum (ECO #s 6138, 6356, 6580, 6643) The following information applies to Revision G of the T racV ision C3 Owner ’s Manual (KVH Part Number 54-0159). 1.3 Materials Provided with T racVision C3 The data/power cable supplied with the system is 28 ft (8.5 m) in length. The RF cable s ...

  • American Dish Service Vision C3 - page 3

    5.3 Replaceable Parts T able 5-1 has been updated to show the new part numbers for the data/power cable, RF cable, and the RF PCB. P art Name P art Number Baseplate Assembly 02-1245-01* 02-1245-03** Radome Assembly 02-0953-04 Data/P ower Cable 32-0730-28 RF Cable 32-0417-50 PC Cable 32-0628-06 CPU PCB 02-1043-02 RF PCB 02-1342 Antenna Gyro 02-1035 ...

  • American Dish Service Vision C3 - page 4

    54-0159 Addendum to Re v . G T racVision C3 Owner’ s Manual Addendum (ECO #6138) The following information applies to Revision G of the T racV ision C3 Owner ’s Manual (KVH Part Number 54-0159). T able 5-1 has been updated to show the new part number for the RF PCB. 5.3 Replaceable Parts Pa r t N a me P ar t Number Baseplate Assembly 02-1245-01 ...

  • American Dish Service Vision C3 - page 5

    Congratulations! Y ou have selected one of the most advanced satellite tracking systems available today . KVH ® Industries’ T racV ision ® C3 i s designed for use with European and North American DVB- compatible satellite services as well as DIRECTV ® . This manual provides detailed instr uctions on the proper installation, use, and maintenanc ...

  • American Dish Service Vision C3 - page 6

    Tr acVision ® , KVH ® , and T racNet™ are trademarks of KVH Industries, Inc. DIRECTV ® is an official trademark of DIRECTV , Inc., a unit of GM Hughes Electronics. DISH Network ™ is an official trademark of EchoStar Communications Corporation. ExpressV u is a proper ty of Bell ExpressV u, a wholly owned subsidiar y of Bell Satellite Ser vice ...

  • American Dish Service Vision C3 - page 7

    T able of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 1.1 Digital Satellite T elevision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 1.2 T racVision C3 System Overview . . . . . . . . . . . . . . . . . . . . . . . . .1-2 1.2.1 T racVision C3 Components . . . . . . . . . . . . . . . . . ...

  • American Dish Service Vision C3 - page 8

    ii 3.1 T urning on the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1 3.2 Changing Channels and Switching Between Satellites . . . . . . .3-2 3.2.1 Using the IRD Remote Control to Switch Between Satellites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 3.2.2 Using the TV/SA T Switch to Switch Between Sat ...

  • American Dish Service Vision C3 - page 9

    5.4.2 RF Detector/D VB Decoder . . . . . . . . . . . . . . . . . . . . . . . . .5-6 5.4.3 Antenna Gyro Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 5.4.4 Antenna LNB Replacement . . . . . . . . . . . . . . . . . . . . . . . .5-8 5.5 Preparation for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9 Appendix ...

  • American Dish Service Vision C3 - page 10

    1 Introduction 1.1 Digital Satellite T elevision Y our new T racV ision C3 satellite antenna is fully compatible with the Digital V ideo Broadcasting (DVB) satellites, which use the international standard for digital TV transmission, as well as Digital Satellite Service (DSS) services, such as DIRECTV . As a r esult, you will be able to r eceive an ...

  • American Dish Service Vision C3 - page 11

    1.2 T racVision C3 System Over view Y our KVH T racV ision C3 employs a state-of-the-art actively stabilized antenna system. Once the satellite is acquired, the antenna gyro continuously measur es your vessel’s motion and position, and transmits commands to the antenna motors to keep the antenna pointed at the satellite at all times. A complete s ...

  • American Dish Service Vision C3 - page 12

    1.2.1 T racVision C3 Components The antenna unit includes the antenna positioning mechanism, signal front end, power supply , and control elements. These elements include antenna drive controls and mechanisms, the cable wrap subassembly , antenna gyro sensor , power conditioning and regulating cir cuits, and the RF detector . The antenna is a parab ...

  • American Dish Service Vision C3 - page 13

    1.2.2 Integrated Receiver Decoder (IRD) The IRD (purchased separately) r eceives satellite signals from the antenna unit for signal processing and channel selection, and sends the signals to the TV set for viewing. The IRD also provides the interface for the user to activate authorization for r eception. Please r efer to the User ’s Manual provid ...

  • American Dish Service Vision C3 - page 14

    1.3.1 Additional Materials Required for T racVision C3 Use To make full use of your new T racV ision C3 and receive satellite TV aboard your vessel, you will need to pr ovide/purchase the following: • T elevision • Appropriate IRD for your selected satellite TV service 1-5 Introduction 54-0159 Re v . G In Nor th Amer ica, you can purchase and a ...

  • American Dish Service Vision C3 - page 15

    2-1 Installation 54-0159 Re v . G 2 Installation T racV ision C3 is designed for simple installation and setup. Just follow these easy steps: Step Refer to Section... 1. Choose the hardware locations 2.1 2. Mount the antenna unit 2.2 3. Connect system components 2.3 4. Activate the IRD 2.4 5. Select the active satellite 2.5 6. Set the ske w angle ( ...

  • American Dish Service Vision C3 - page 16

    2-2 A Guide to T racVision C3 Kitpack Contents T able 2-2 lists the materials provided in the kitpack. Pa rt Qty . KVH Part No. Tie-wraps 5 22-0013 1 ⁄ 4 "-20 x 3" hex head cap scre ws 6 14-0250-48 1 ⁄ 4 "-20 x 5 ⁄ 8 " hex scre ws 4 14-0250-0010 1 ⁄ 4 " flat washers 10 14-0251 Switchplate bulb assemb ly (spare) 1 19 ...

  • American Dish Service Vision C3 - page 17

    2-3 Installation 54-0159 Re v . G • The antenna unit should not be too high off the water (a height above the waterline no more than half the vessel length). • Make sure that the mounting surface is rigid so that it cannot flex when the vessel vibrates. If necessary , add a strength member to the mounting site to stiffen it. Radar Concerns The ...

  • American Dish Service Vision C3 - page 18

    2-4 A Guide to T racVision C3 2.2 Mounting the Antenna Unit The following instructions will r esult in a secure, ef fective installation and trouble-fr ee operation of your T racV ision C3. Antenna Mounting Procedure 1. Make sure that you have chosen a suitable mounting location based upon the guidelines in Section 2.1, “Choosing the Best Locatio ...

  • American Dish Service Vision C3 - page 19

    2-5 Installation 54-0159 Re v . G 5. While the antenna unit is in place, mark a location on the deck for the 3 ⁄ 4 " (19 mm) cable access hole to permit convenient cable access to the antenna’s baseplate connectors. 6. Cut the tie-wraps holding the antenna unit to the forward shipping r estraint (see Figure 2-4). 7. Remove the nuts and was ...

  • American Dish Service Vision C3 - page 20

    2-6 A Guide to T racVision C3 11 .R eposition the mounting plate over the drilled mounting holes, lining up the the mounting plate holes with the holes in the mounting surface. Apply a bead of silicone sealant around each of the six mounting holes on the top surface of the mounting plate. 12. Place the antenna unit on top of the mounting plate, mak ...

  • American Dish Service Vision C3 - page 21

    2-7 Installation 54-0159 Re v . G 14. At each hole, place a 1 ⁄ 4 " flat washer on a 1 ⁄ 4 " -20 x 3" bolt (from the kitpack) and insert it into the mounting hole from above (see Figur e 2-9). 15. Apply a flat washer , lock washer , and nut (removed in Step 7 ) to each mounting bolt fr om below decks and tighten securely . 16. Wh ...

  • American Dish Service Vision C3 - page 22

    2-8 A Guide to T racVision C3 17. Place the radome onto the baseplate (labels facing the sides of the vessel) and secure in place using the 8 pan head screws and flat washers r emoved in Step 3 . 18. Drill the cable access hole (marked in Step 5 ). Recommended 3/16" (5 mm) Drain Hole P ositions Drain Hole Angle (relative to baseplate) Bow Angl ...

  • American Dish Service Vision C3 - page 23

    2-9 Installation 54-0159 Re v . G 2.3 Connecting System Components The following sections provide instr uctions for properly wiring the antenna unit to belowdecks components. Locating the Switchplate A switchplate has been provided to serve as the hub of the T racV ision C3 wiring (with the exception of the RF cable, which will be connected to the ...

  • American Dish Service Vision C3 - page 24

    2-10 A Guide to T racVision C3 2.3.1 Connecting the Antenna Data/Power Cable 1. Connect one end of the antenna data/power cable to the antenna’s data/power connector and lock in place (see Figure 2-13). 2. Route the other end of the data/power cable down through the cable access hole in the deck and out through the switchplate panel cutout. 3. Co ...

  • American Dish Service Vision C3 - page 25

    2-11 Installation 54-0159 Re v . G 2.3.2 Connecting to V essel Power Recommended Power Wiring Short circuits may r esult in severe electrical shock or burns. T urn off vessel power and test the cir cuit to ensure that no power is present befor e connecting the power cable. The switchplate requir es an 1 1-16 VDC power input. A quick- tripping circu ...

  • American Dish Service Vision C3 - page 26

    2-12 A Guide to T racVision C3 2.3.3 Connecting the IRD Ground Wire Ag r ounding wir e (Cable #32-0583-50) has been provided to connect your IRD to a suitable ground and pr otect the system. Attach the grounding wir e to any suitable screw on the rear panel of the IRD with a good contact with the IRD chassis. The other end should be connected to a ...

  • American Dish Service Vision C3 - page 27

    2-13 Installation 54-0159 Re v . G 2.3.5 Connecting the Antenna RF Signal Cable to the IRD 1. Route an RF cable up through the deck’s cable access hole. 2. Connect the RF cable to the antenna’s RF1 connector (see Figure 2-17). Once the cable is securely connected, loosen the sealing nut at the base of the RF1 connector and tighten it onto the e ...

  • American Dish Service Vision C3 - page 28

    2.3.5.2 Connecting Three or More IRDs and TVs (North American Systems Only) To install thr ee or mor e IRD/TV pairs, an active multiswitch (Channel Master model 6214IFD or equivalent) must be placed between the antenna unit and the IRDs. Figure 2-18 illustrates typical wiring arrangements for multiple IRDs. Mount the multiswitch unit in accordance ...

  • American Dish Service Vision C3 - page 29

    Installing More than One Multiswitch If there is a need for mor e than four IRDs, it is possible to carry out a multiple multiswitch installation, as illustrated in Figure 2-19. 2.4 Activating the IRD DIRECTV and DISH Network IRD Activation KVH makes it easy to activate your DIRECTV or EchoStar (DISH Network) IRD. Just call KVH at 1-888-584-4163 an ...

  • American Dish Service Vision C3 - page 30

    2.5 Selecting the Active Satellite As noted previously , T racV ision C3 can track a variety of DVB- compatible and DSS (DIRECTV) satellites. The system contains a prepr ogrammed library of European and North American satellites. It also has two open slots that you may use to program two additional satellites of your choice. T ables 2-3 and 2-4 pro ...

  • American Dish Service Vision C3 - page 31

    The satellites listed in T racV ision C3’s pr epr ogrammed satellite library will be sufficient for most users. However , if you wish to install one or two user-defined satellites, pr oceed to Section 2.5.2, “Programming User-defined Satellites.” After configuring the user- defined satellites, return to the satellite installation pr ocess in ...

  • American Dish Service Vision C3 - page 32

    3. Apply power to the T racV ision C3 system and allow the system to complete full initialization. Data should be scrolling on the PC display to identify any system problems detected. If no data is seen, recheck your connections and the terminal software setup. Installing the Satellite of Choice Once the data connection has been made between the PC ...

  • American Dish Service Vision C3 - page 33

    For example, to assign Astra 2S and Hotbird for your satellite pair , and to track Astra 2S, you would enter the following data: SA TINST ALL,ASTRA2S,HOTBIRD<cr> @L,A<cr> ZAP<cr> 2.5.2 Programming User -defined Satellites The T racV ision C3 satellite library has two open slots that you may use to program two user -defined satelli ...

  • American Dish Service Vision C3 - page 34

    Entering User -defined Satellite Data Once the link between the PC and the T racV ision C3 is established as described in Section 2.5, “Selecting the Active Satellite,” it is necessary to provide initial longitude data r egar ding the user-defined satellite. T o do so, enter the SA TCONFIG parser command via PC as follows: Command: SA TCONFIG,U ...

  • American Dish Service Vision C3 - page 35

    This information has to be entered for each of the four transponder categories: • vertical high • vertical low • horizontal high • horizontal low or • right • left T racV ision C3 requires that the data fields for all four transponder categories be provided. If the selected satellite does not have information for one or more of the tran ...

  • American Dish Service Vision C3 - page 36

    An Example of Configuring a User -defined Satellite (Europe) The following is an example of configuring the fictional YOURSA T 101 as the USER1 configured satellite. Prior to configuring this satellite or any others, be certain to get the most up-to-date information from one of the sour ces previously discussed. Y OURSA T 101 at 7 W est, D VB decod ...

  • American Dish Service Vision C3 - page 37

    An Example of Configuring a User -defined Satellite (N. America) The following is an example of configuring the fictional YOURSA T 101 as the USER1 configured satellite. Prior to configuring this satellite or any others, be certain to get the most up-to-date information from one of the sour ces previously discussed. Y OURSA T 101 at 71 W est, D VB ...

  • American Dish Service Vision C3 - page 38

    2.6 Setting the Skew Angle (European Systems Only) The Antenna LNB skew angle must be adjusted to optimize channel reception. Refer to your satellite service pr ovider for the proper skew angle for the selected satellite service and geographical location. The skew angle for KVH predefined satellites can also be obtained by using a PC connected to t ...

  • American Dish Service Vision C3 - page 39

    2. Open the terminal emulation software and establish the following settings: •9 6 0 0 baud • no parity •8 data bits •1 start bit •1 stop bit • no flow control 3. Apply power to the T racV ision C3 system and the IRD and allow the system to complete full initialization. Data should be scrolling on the PC display to identify any system p ...

  • American Dish Service Vision C3 - page 40

    2.8 Changing Geographic Location If you move from Eur ope to the U.S., or from the U.S. to Europe, you will need to modify your T racV ision C3 system to receive satellite TV signals in the new geographic area. To begin r eceiving satellite signals in the new ar ea, perform the following steps. Swap LNBs To r eceive the proper satellite signals in ...

  • American Dish Service Vision C3 - page 41

    3 Using Y our T racVision C3 For T racV ision C3 to receive the satellite signals, the antenna must have a clear line of sight to the satellite. If you only receive intermittent signals or the antenna cannot find the satellite, check around your vessel for any objects that could be blocking the signal, such as other vessels, trees, buildings, other ...

  • American Dish Service Vision C3 - page 42

    3. A void turning the vessel for 60 seconds after turning on the antenna to allow the antenna gyro to initialize properly . 3.2 Changing Channels and Switching Between Satellites If you have followed the installation instructions, your system should be set to the active satellite pair of your choice and the system should have downloaded the appropr ...

  • American Dish Service Vision C3 - page 43

    3.2.2 Using the TV/SA T Switch to Switch Between Satellites - Optional If you are a DISH 500 customer , or you’re unable to switch between satellites using the IRD remote contr ol, you can use the optional TV/SA T Switch (see Figure 3-3) to easily select between Satellite A and Satellite B. TV/SA T Switch Controls and Indicators The Select button ...

  • American Dish Service Vision C3 - page 44

    Using the TV/SA T Switch The TV/SA T Switch is very easy to use. All operations ar e controlled thr ough the single Select button. To select the second satellite, perform the following steps: 1. Press the Select button on the TV/SA T Switch. 2. The indicator for the current satellite (Sat A or Sat B) extinguishes, while the indicator for the other ...

  • American Dish Service Vision C3 - page 45

    2. Open the terminal emulation software and establish the following settings: •9 6 0 0 baud • no parity •8 data bits •1 start bit •1 stop bit • no flow control 3. Once the data connection is made, enter the Satellite Selection command as follows: Command: @L,x<cr> (<cr> indicates a carriage return/ENTER key) Where: x = A or ...

  • American Dish Service Vision C3 - page 46

    KVH recognizes that some customers may not want to take advantage of this convenient feature. In this case, it is possible to disable Sleep Mode using a simple software command as follows: 1. Connect a laptop computer to the system using the maintenance port and a terminal emulation program, as described in Section 2.5.1, “Installing Y our Select ...

  • American Dish Service Vision C3 - page 47

    4T roubleshooting The troubleshooting matrix shown in T able 4-1 identifies some trouble symptoms, their possible causes, and r eferences to troubleshooting solutions. 4.1 Causes and Remedies for Common Operational Issues There ar e a number of common issues that can affect the signal r eception quality or the operation of the T racV ision C3. The ...

  • American Dish Service Vision C3 - page 48

    4.1.1 Blown Fuse or Improper Wiring If the antenna unit is installed but entirely non-r esponsive, there are two key factors to check as part of the tr oubleshooting process: 1. Blown Fuse – The antenna unit is equipped with two fuses mounted on its CPU Board. If either of these fuses has blown or been broken, the antenna unit will not operate. R ...

  • American Dish Service Vision C3 - page 49

    4.1.4 Satellite Signal Blocked Satellite signals can be blocked or degraded by building, trees, other vessels, or equipment on the vessel itself. Refer to Section 2.1, “Choosing the Best Location,” to make certain that the T racV ision C3 unit is in the optimal location. Simply moving the vessel to clear an external obstruction will also r esto ...

  • American Dish Service Vision C3 - page 50

    4.1.8 Incorrect or Loose RF Connectors As part of preventive maintenance (described in Section 5, “Maintenance” ) KVH recommends checking the antenna unit cable connections. A loose RF connector can reduce the signal quality . In addition, if you are unable to switch to the other programmed satellite, make sur e that you have connected your RF ...

  • American Dish Service Vision C3 - page 51

    4.3 Antenna Gyro and LNB Faults Section 5, “Maintenance,” provides detailed instructions for authorized service personnel who may be requir ed to replace the T racV ision C3 antenna gyro or the LNB. 4.4 Computer Diagnostics T racV ision C3 has been designed to provide diagnostic readouts viewed on a personal computer having an RS-232 serial com ...

  • American Dish Service Vision C3 - page 52

    4.5 Maintenance Port Parser Commands T racV ision C3 system parser commands are detailed in Appendix E . 4-6 A Guide to T racVision C3 ...

  • American Dish Service Vision C3 - page 53

    5-1 Maintenance 54-0159 Re v . G 5 Maintenance 5.1 W arranty/Ser vice Information For information on KVH warranty , repair , and liability policies, please refer to the complete warranty statement provided at the conclusion of this manual. If you have any questions, please call your local authorized dealer/installer or distributor , or contact KVH ...

  • American Dish Service Vision C3 - page 54

    5-2 A Guide to T racVision C3 5.3 Replaceable Parts T racV ision C3 has been designed with durability and low maintenance in mind. If you experience an operating problem or otherwise requir e technical assistance, contact your local authorized T racV ision C3 dealer/distributor first. Have the antenna unit serial number ready with a list of the tr ...

  • American Dish Service Vision C3 - page 55

    5-3 Maintenance 54-0159 Re v . G 5.4 Field Replaceable Unit Procedures The following subsections provide detailed pr ocedures for r epairing or swapping out field r eplaceable units. The procedures r efer to labeled items pr esented on the following diagrams. PCB PCB Cover Pan Head Screws Rotating Plate RF Board Standoffs RF Board Cover RF Cover Sc ...

  • American Dish Service Vision C3 - page 56

    5-4 A Guide to T racVision C3 Locking Nuts and W ashers Antenna Gyro Antenna Gyro Cable Reflector Bracket Wing Screw and W asher LNB Clamp European Antenna Gyro Gasket N. American LNB Styles Antenna Reflector PCB Cable Clamp RF Board Cable Clamp Screw Rotating Plate Antenna Gyro Cable Figure 5-4 Close-up of RF Detector and PCB Figure 5-3 Antenna As ...

  • American Dish Service Vision C3 - page 57

    5-5 Maintenance 54-0159 Re v . G 5.4.1 PCB Removal and Replacement Estimated Time to Repair: 1 ⁄ 2 hour The micropr ocessor PCB assembly is protected by a cover fastened to the rotating plate – Fig. 5-1 . The cover must be r emoved to gain access to the main power fuses and the PCB assembly . 1. Using needle-nose pliers, remove the E-ring fr om ...

  • American Dish Service Vision C3 - page 58

    5-6 A Guide to T racVision C3 7. The PCB is mounted to the rotating plate with 9 pan head screws. Remove the scr ews and PCB. 8. Reverse this process to install the r eplacement PCB. Reinstall all cable connectors removed in Step 6 . 9. Carry out all calibration procedur es for the antenna gyro ( Section 5.4.3 ) . 10. Reinstall your preferr ed sate ...

  • American Dish Service Vision C3 - page 59

    5-7 Maintenance 54-0159 Re v . G 5. Remove the 4 standoffs – Fig. 5-1 . Remove the RF Detector PCB from the r otating plate. 6. Installation of the replacement RF Detector is the r everse of this pr ocedure. Be sure that the RF cables are r estored to their original positions. Be sure that the center conductor pin is center ed in the connector be ...

  • American Dish Service Vision C3 - page 60

    5-8 A Guide to T racVision C3 Antenna Gyro Calibration 1. Connect a PC to the communications port as described in Section 4.4, “Computer Diagnostics.” 2. T ype HALT<cr> (<cr> indicates a carriage r eturn/ ENTER key) while the system is performing the limit switch initialization routine. The system will complete the initialization fu ...

  • American Dish Service Vision C3 - page 61

    5.5 Preparation for Shipment If it is necessary to repack the antenna unit for shipment, the shipping restraints r emoved during installation must be r eplaced. Follow these steps to r einstall the restraints. 1. Rotate the antenna unit so that the LNB is facing away from the baseplate connectors. 2. Attach the three r estraints to the baseplate us ...

  • American Dish Service Vision C3 - page 62

    Appendix A System Specifications Physical Characteristics Po wer 11-16 v olts DC @ 2.5 amps nominal, 3.5 amps peak Dimensions/W eight 32" (81 cm) wide x 14.8" (38 cm) high, 33 lbs (15 kg) LNB European System: Single output N. American System: Dual output Tr acking Better than 30 º /sec Maintenance P or t 9600 bps, 8,N,1,EIA, RS232 Po int ...

  • American Dish Service Vision C3 - page 63

    Appendix B Comprehensive T racVision C3 System Wiring Diagram The wiring diagram is presented on the following page. B-1 Comprehensive T racVision C3 System Wiring Diagram 54-0159 Re v . G ...

  • American Dish Service Vision C3 - page 64

    ...

  • American Dish Service Vision C3 - page 65

    Appendix C Switchplate T emplate C-1 Switchplate T emplate 54-0159 Re v . G 3.82" (97 mm) .32" (8 mm) 2.36" (60 mm) .16" (4 mm) 3.19" (81 mm) 2.05" (52 mm) P anel Cutout 3 / 32 " (2.5 mm) dia ...

  • American Dish Service Vision C3 - page 66

    Appendix D Startup Data Sequence The data on the following pages presents a standar d startup data sequence register ed by the T racV ision C3. This sequence can be r ecor ded using the data port and a PC. ?PGM KVH TracVision C3 Rev X - Version X.XX - Serial Number XXXXXXXX RF: ZAP *** Initializing RF Controller *** RF: S,A,V,U,V RF: SATINSTALL,55, ...

  • American Dish Service Vision C3 - page 67

    *** Limit Switch Search *** RATE BIAS: PASS------------------------------------PASS is expected Searching for DSS_101, Threshold = 1000 RF: S,A,H,U,V +POS: 220.2 33.4 356 +POS: 155.5 33.4 333 RF: S,A,V,U,V +POS: 85.0 33.4 429 RF: S,A,H,U,V +POS: 14.4 33.4 274 *** Cable Unwrap *** Cable Unwrap: AZ = -360.00 +POS: 9.8 33.4 466 RF: S,A,V,U,V +POS: 180 ...

  • American Dish Service Vision C3 - page 68

    Appendix E Maintenance Port Parser Commands T racV ision C3 system parser commands are parsed when the system receives an ASCII carriage return (Hex 0D). An ASCII line feed (Hex 0A) is permitted but is ignored in any transmitted command. All system responses are terminated with an ASCII carriage return followed by a line feed and ending with either ...

  • American Dish Service Vision C3 - page 69

    Calibrate Gyro Function: perf orms azimuth and elev ation calibration Command: CALGYRO Argument: none Response: echoes command and calibrates gyro Find Skew Angle f or Currently Selected Satellite Function: calculates necessar y LNB ske w based on latitude, longitude, and selected satellite Command: SKEW ANGLE* Argument: none Response: displa ys sk ...

  • American Dish Service Vision C3 - page 70

    Elev ation Angle Function: commands a manual ele vation angle that the mechanism mov es to Command: EL,xxx (range is 100-850) Argument: desired elev ation angle of the mechanism relative to up , 10.0°-85.0° Response: echoes the command; mechanism moves at a fix ed v elocity Azimuth CW Step Function: commands a 0.1 deg CW manual step in azimuth an ...

  • American Dish Service Vision C3 - page 71

    E.3 Operational Commands To execute the following commands, first put the antenna unit in idle mode by typing HAL T and pressing “ENTER.” After the system comes to a halt, type DEBUGON and pr ess “ENTER” to enter programming mode. T racking Mode Function: star ts active trac king of the satellite Command: TRA CK Argument: none Response: ech ...

  • American Dish Service Vision C3 - page 72

    Analog Signal Strength Report Function: repor ts signal strength from RF detector circuit in A/D counts (000-FFF He x) Command: SIGLEVEL Argument: none Response: Signal Strength = xxxx E.5 RF Board Commands Serial Communications, Status/P olarization Report, T one Changes Function: star t ser ial communications, reports status & polarization/to ...

  • American Dish Service Vision C3 - page 73

    Report RF T racking P arameters Function: repor ts all RF tracking par ameters f or primar y & secondar y satellites* Command: @SA TCONFIG Response: F ,x,fffff ,S,C ,ID ,P ,B ,D <cr> Where: x = Satellite (a = Primar y , b = Secondar y) fffff = F requency in MHz (00000 and 10700 to 12700) S = Symbol rate in Mbit/Sec (1000 to 29999) C = FEC ...

  • American Dish Service Vision C3 - page 74

    ID Match/Decoded Network ID Function: repor t ID match and decoded network ID Command: @CHECKID Response: Y ,0X#### N,0X#### Y, NoID N,NoID Where: Y = yes N = no 0X#### = network ID NoID = satellite unidentified E.6 Installation Commands To execute the following commands, first put the antenna unit in idle mode by typing HAL T and pressing “ENTER ...

  • American Dish Service Vision C3 - page 75

    Report Satellite Names Function: repor t names for satellites A and B Command: SA TINST ALL Response: SA TINST ALL,<sat_a_name>,<sat_b_name> Report Configured Satellite Names Function: repor t names for all configured satellites Command: SA TLIST A Response: SA TLIST A,<sat_name1>,...,<sat_nameX> Report V alid Satellite B Se ...

  • American Dish Service Vision C3 - page 76

    E.7 Debug Commands Report Offset Angles Function: repor ts system offset angles Command: OFFSETS OFFSETS,XXXXX,YYYY Response: Offsets= XXXXX.X XXXXX.X Where: X = new azim uth offset (-1800 - 1800) Y = new ele vation angle (-450 - 450) Applies Default V alues to Default Satellites Function: updates the def ault satellites to the def ault v alues Com ...

  • American Dish Service Vision C3 - page 77

    KVH Industries Limited W arranty T racVision C3 Limited Warranty on Hardware KVH Industries, Inc. warr ants the KVH product purchased against def ects in materials for a period of TWO (2) y ears and against f actor y labor costs f or a period of ONE (1) year from the date of original retail purchase by the original purchaser . It is the customer’ ...

  • American Dish Service Vision C3 - page 78

    KVH Industries, Inc. 50 Enterprise Center Middletown, RI 02842 U.S.A. Phone: +1 401 847-3327 Fax: +1 401 849-0045 E-mail: info@kvh.com Internet: www .kvh.com KVH Europe A/S V ed Klaedebo 12 2970 Hoersholm Denmark Phone: +45 45 160 180 Fax: +45 45 867 077 E-mail: info@kvh.dk Internet: www .kvh.com KVH ® , T racNet ™ , and T racVision ® are trade ...

Производитель American Dish Service Категория Satellite TV System

Документы, которые мы получаем от производителя устройства American Dish Service Vision C3 мы можем разделить на несколько групп. Это в частности:
- технические чертежи American Dish Service
- инструкции обслуживания Vision C3
- паспорта изделия American Dish Service
- информационные брошюры
- энергетические этикетки American Dish Service Vision C3
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания American Dish Service Vision C3.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа American Dish Service Vision C3, инструкции обслуживания, короткие инструкции или инструкции пользователя American Dish Service Vision C3. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия American Dish Service Vision C3.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства American Dish Service Vision C3, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании American Dish Service Vision C3 пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей American Dish Service Vision C3.

Полная инструкция обслуживания American Dish Service, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией American Dish Service Vision C3 - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания American Dish Service Vision C3, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся American Dish Service Vision C3, которое найдем в данном документе
3. Советы по использованию основных функций устройства American Dish Service Vision C3 - которые должны облегчить нам первые шаги во время использования American Dish Service Vision C3
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем American Dish Service Vision C3
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра American Dish Service Vision C3 в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся American Dish Service Vision C3?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с American Dish Service Vision C3, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с American Dish Service Vision C3 со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)