Инструкция обслуживания Johnson Controls 13 SEER

12 страниц 0.24 mb
Скачать

Перейти на страницу of 12

Summary
  • Johnson Controls 13 SEER - page 1

    347337-UIM-A-0408 R-22 OUTDOOR SPLIT -SYSTEM AIR CONDITIONING MODELS: 13 SEER A Y018-030 SERIES 1.5 TO 2.5 T ONS INSTALLATION MANUAL LISTED ISO 9001 Certified Quality Management System SECTION I: GENERAL The outdoor units are designed to be connected to a matching indoor coil with sweat connect lines. Sweat connect units are factory charged with re ...

  • Johnson Controls 13 SEER - page 2

    347337-UIM-A-0408 2 Johnson Controls Unitary Products SECTION III: UNIT INST ALLA TION LOC A T IO N Before starting the installation, select and check the suitability of the location for both the indoor and outdoor unit. Observe all limitations and clearance requirements. The outdoor unit must have sufficient clearance for air entrance to the conde ...

  • Johnson Controls 13 SEER - page 3

    347337-UIM-A-0408 Johnson Controls Unitary Produ cts 3 PIPING CONNECTIONS The outdoor condensing unit must be connected to the indoor evapora - tor coil using field supplied r efrigerant grade (ACR) co pper tubing that is internally clean and dry . Units shoul d be installed only with the tubing sizes for approved system combinations as specified i ...

  • Johnson Controls 13 SEER - page 4

    347337-UIM-A-0408 4 Johnson Controls Unitary Products Connect the refrigerant lines u sing the following proced ure: 1. Remove the cap and Schrader core from both the liquid and vapor service valve service ports at the outdoor unit. Connect low pres- sure nitrogen to the liquid line service port. 2. Braze the liquid line to the liqui d valve at the ...

  • Johnson Controls 13 SEER - page 5

    347337-UIM-A-0408 Johnson Controls Unitary Produ cts 5 SECTION V : INST ALLA TIONS REQUIRING AN ADD-ON TXV KIT For installations requiring a TXV kit, refer to the Installation Instruct ions accompanying the TXV kit. SECTION VI: EV ACU A TI ON It will be necessary to evacuate the system to 500 microns or less. If a leak is suspected, leak test with ...

  • Johnson Controls 13 SEER - page 6

    347337-UIM-A-0408 6 Johnson Controls Unitary Products SECTION VIII: ELECTRICAL CONNECTIONS GENERAL INFORMA TION & GROUNDING Check the electrical supply to be sure that it meets the values specified on the unit nameplate and wiring label. Power wiring, control (low voltage) wiring, disconnect switch es and over current protection must be supplie ...

  • Johnson Controls 13 SEER - page 7

    347337-UIM-A-0408 Johnson Controls Unitary Produ cts 7 For additional connection diagrams for a ll UP G equipment refer to “Low V oltage System Wiring” document available online at www . upgnet.com in the Product Catalog Section. FIGURE 9: Thermostat Chart - Single S tage AC with PSC Air Handler AC 1A Single Stage Air Conditioner – PSC Air Ha ...

  • Johnson Controls 13 SEER - page 8

    347337-UIM-A-0408 8 Johnson Controls Unitary Products FIGURE 10: Thermostat Chart - Single S tage AC with PSC Air Handler AC 1B Single Stage Air Conditioner – PSC Air Handler C 24 – Volt Comm on Y Compressor Contactor SINGLE STAGE AIR CONDIT IONER MA SHP AHP ID MODELS SINGLE STAGE AIR CONDIT I O N ER Other Part Nu mbers: SAP = Legacy 265902 = 0 ...

  • Johnson Controls 13 SEER - page 9

    347337-UIM-A-0408 Johnson Controls Unitary Produ cts 9 FIGURE 1 1: Thermostat Chart - Single St age AC with PSC Fur nace AC 5D Single Stage Air Conditioner – Single Stage PSC Furnace HM1 Humidistat Y Full Stage Compressor G Fan *PP11C70224 THERMOSTAT RH 24 – Volt Hot (Heat XFMR) RC 24 – Volt Hot (Cool XFMR) W Full Stage Heat Clipping Jump er ...

  • Johnson Controls 13 SEER - page 10

    347337-UIM-A-0408 10 Johnson Controls Unitary Products FIGURE 12: Thermostat Chart - Single S tage AC with PSC Furnace AC 5E Single Stage Air Conditioner – Single Stage PSC Furnace C 24 – Volt Comm on Y Compressor Contactor SINGLE STAGE AIR CONDIT IONER SINGLE STAGE AIR CONDIT I O N ER Y Full Stage Compressor G Fan *BP11C50124 *BN11C01124 *DP11 ...

  • Johnson Controls 13 SEER - page 11

    347337-UIM-A-0408 Johnson Controls Unitary Produ cts 11 INDICA TIONS OF PROPER OPERA TION Cooling 1. The outdoor fan should be running, with warm air being dis- charged from the top of the unit. 2. The indoor blower (furnace or air handler) will be operating, dis- charging cool air from the ducts. Co ils or other parts in the air cir- cuit should b ...

  • Johnson Controls 13 SEER - page 12

    Subject to change without notice. Printed in U.S.A. 347337-UIM-A-0408 Copyright © 2008 by Johnson Controls, Inc. All rights reserved. Supersedes: 259715-UIM-A-0606 Johnson Contro ls Unitary Produc t s 5005 Y ork Driv e Norman, OK 7306 NOTES ...

Производитель Johnson Controls Категория Air Conditioner

Документы, которые мы получаем от производителя устройства Johnson Controls 13 SEER мы можем разделить на несколько групп. Это в частности:
- технические чертежи Johnson Controls
- инструкции обслуживания 13 SEER
- паспорта изделия Johnson Controls
- информационные брошюры
- энергетические этикетки Johnson Controls 13 SEER
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания Johnson Controls 13 SEER.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа Johnson Controls 13 SEER, инструкции обслуживания, короткие инструкции или инструкции пользователя Johnson Controls 13 SEER. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия Johnson Controls 13 SEER.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства Johnson Controls 13 SEER, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании Johnson Controls 13 SEER пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей Johnson Controls 13 SEER.

Полная инструкция обслуживания Johnson Controls, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией Johnson Controls 13 SEER - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания Johnson Controls 13 SEER, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся Johnson Controls 13 SEER, которое найдем в данном документе
3. Советы по использованию основных функций устройства Johnson Controls 13 SEER - которые должны облегчить нам первые шаги во время использования Johnson Controls 13 SEER
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем Johnson Controls 13 SEER
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра Johnson Controls 13 SEER в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся Johnson Controls 13 SEER?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с Johnson Controls 13 SEER, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Johnson Controls 13 SEER со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Комментарии (0)