-
Mercury Marine 898393001 - page 1
i All of us at Mercury Marine want to thank you for choosing a Mercury Marine Inflatable boat. You have made a sound investment in boating pleasure. We firmly believe it will bring you many years of boating fun and excitement. This Owners Manual contains all the safety and operating information you need to get the most out of your Inflatable boat. ...
-
Mercury Marine 898393001 - page 2
ii Record your Hull Identification Number (HIN) and engine model/ serial number. The HIN is located on the back of the boat on the starboard side. The engine model/serial number is located on the swivel bracket. You will need this information to obtain parts, warranty service or provide information if your inflatable boat is stolen. Purchase Date D ...
-
Mercury Marine 898393001 - page 3
TABLE OF CONTENTS iii WARRANTY INFORMATION Transfer of Warranty .................................................................... 1 Warranty Registration United States and Canada ....................... 1 Mercury Inflatable Boat Limited Warranty United States and Canada ............................................................................ ...
-
Mercury Marine 898393001 - page 4
TABLE OF CONTENTS iv Drain Valve Operation ............................................................... 29 Loading ...................................................................................... 29 Towing ....................................................................................... 30 Air Chamber Deflates Accidently ............ ...
-
Mercury Marine 898393001 - page 5
WARRANTY INFORMATION 1 Transfer of Warranty The limited warranty is transferable to a subsequent purchaser, but only for the remainder of the unused portion of the limited warranty. This will not apply to products used for commercial applications. To transfer the warranty to the subsequent owner, send or fax a copy of the bill of sale or purchase a ...
-
Mercury Marine 898393001 - page 6
WARRANTY INFORMATION 2 Mercury Marine Attn: Warranty Registration Department W6250 W. Pioneer Road P.O. Box 1939 Fond du Lac, WI 54936-1939 920-929-5054 Fax 920-929-5893 NOTE: Registration lists must be maintained by Mercury Marine and any dealer on marine products sold in the United States, should a safety recall notification under the Federal Saf ...
-
Mercury Marine 898393001 - page 7
WARRANTY INFORMATION 3 DURATION OF COVERAGE The fiberglass hull, air deck® floor, all hull attachments and accessories, but not limited to, floorboards. seats, rope holders, oar locks, oars, rope, air pump, lifting handles, d‑rings, oar holders, valves, seat webbings, and transom integrity are covered by this Limited Warranty for one (1) year fr ...
-
Mercury Marine 898393001 - page 8
WARRANTY INFORMATION 4 HOW TO OBTAIN WARRANTY COVERAGE The customer must provide Mercury with a reasonable opportunity to repair, and reasonable access to the product for warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury dealer authorized to service the product. If purchaser cannot deliver the pro ...
-
Mercury Marine 898393001 - page 9
WARRANTY INFORMATION 5 DISCLAIMERS AND LIMITATIONS: THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE ...
-
Mercury Marine 898393001 - page 10
GENERAL INFORMATION 6 Boater's Responsibilities The operator (driver) is responsible for the correct and safe operation of the boat and safety of its occupants and general public. It is strongly recommended that each operator (driver) read and understand this entire manual before operating the boat. Be sure at least one additional person on bo ...
-
Mercury Marine 898393001 - page 11
GENERAL INFORMATION 7 Lanyard Stop Switch The purpose of a lanyard stop switch is to turn off the engine when the operator moves far enough away from the operator's position (as in accidental ejection from the operator's position) to activate the switch. Tiller handle outboards and some remote control units are equipped with a lanyard sto ...
-
Mercury Marine 898393001 - page 12
GENERAL INFORMATION 8 Important Safety Information: The purpose of a lanyard stop switch is to stop the engine when the operator moves far enough away from the operator's position to activate the switch. This would occur if the operator accidentally falls overboard or moves within the boat a sufficient distance from the operator's positio ...
-
Mercury Marine 898393001 - page 13
GENERAL INFORMATION 9 ! WARNING Avoid serious injury or death from deceleration forces resulting from accidental or unintended stop switch activation. The boat operator should never leave the operator's station without first disconnecting the stop switch lanyard from the operator. Accidental or unintended activation of the switch during normal ...
-
Mercury Marine 898393001 - page 14
GENERAL INFORMATION 10 WHILE BOAT IS STATIONARY ! WARNING Stop your engine immediately whenever anyone in the water is near your boat. Serious injury to the person in the water is likely if contacted by a rotating propeller, a moving boat, a moving gearcase, or any solid device rigidly attached to a moving boat or gearcase. Shift outboard into neut ...
-
Mercury Marine 898393001 - page 15
GENERAL INFORMATION 11 There is another less common hazardous result from allowing your boat to launch off a wave or wake. If the bow of your boat pitches down far enough while airborne, upon water contact it may penetrate under the water surface and submarine for an instant. This will bring the boat to a nearly instantaneous stop and can send the ...
-
Mercury Marine 898393001 - page 16
GENERAL INFORMATION 12 • The boat could move suddenly in a new direction. Such a sharp change in direction can cause occupants to be thrown out of their seats or out of the boat. • A rapid reduction in speed. This will cause occupants to be thrown forward, or even out of the boat. • Impact damage to the outboard and/or boat. Keep in mind, the ...
-
Mercury Marine 898393001 - page 17
GENERAL INFORMATION 13 ! WARNING Avoid the combination of a running engine and poor ventilation. Prolonged exposure to carbon monoxide in sufficient concentration can lead to unconsciousness, brain damage, or death. GOOD VENTILATION Ventilate passenger area, open side curtains, or forward hatches to remove fumes. 21622 Example of desired air flow t ...
-
Mercury Marine 898393001 - page 18
GENERAL INFORMATION 14 WHILE BOAT IS MOVING a b 21628 a - Running the boat with the trim angle of the bow too high b - Running the boat with no forward hatches open Safe Boating Suggestions In order to safely enjoy the waterways, familiarize yourself with local and other governmental boating regulations and restrictions, and consider the following ...
-
Mercury Marine 898393001 - page 19
GENERAL INFORMATION 15 Never be under the influence of alcohol or drugs while boating (it is the law) . Alcohol or drug use impairs your judgment and greatly reduces your ability to react quickly. Prepare other boat operators. Instruct at least one other person on board in the basics of starting and operating the outboard, and boat handling, in cas ...
-
Mercury Marine 898393001 - page 20
GENERAL INFORMATION 16 Specifications Description Model 300 330 350 Dry weight 59 kg (130 lb.) 69 kg (152 lb.) 84 kg (185 lb.) Maximum load 475 kg (1047 lb.) 535 kg (1179 lb.) 572 kg (1261 lb.) Maximum engine power 7.5 kw (10 hp) 11.2 kw (15 hp) 18.6 kw (25 hp) Maximum engine weight 50 kg (110 lb.) 50 kg (110 lb.) 71 kg (157 lb.) Maximum personnel ...
-
Mercury Marine 898393001 - page 21
GENERAL INFORMATION 17 Manufacturer's Plate The manufacturer's plate is located on the inside of the boat transom. a b c d e f g h i 14598 a - Boat design category ‑ see following table b - Certified Europe Insignia c - Model number d - Maximum load capacity ‑ people + outboard + fuel tank and equipment e - Maximum outboard weight f - ...
-
Mercury Marine 898393001 - page 22
GENERAL INFORMATION 18 Boat Design Categories Navigation Wind Force and Wave Height C Inshore Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions may experience wind force 6 (Beaufort scale) and wave heights up to 2 m (6.5 ft.). D Sheltered waters Designed for voyages on sheltered coastal waters, small b ...
-
Mercury Marine 898393001 - page 23
BOAT COMPONENTS 19 Components Location ‑ Model 300 BACK VIEW a 24439 a - Hull identification number (HIN) FRONT VIEW a 24441 a - Front mooring ring ...
-
Mercury Marine 898393001 - page 24
BOAT COMPONENTS 20 TRANSOM VIEW a b c d e c 24447 a - Drain plug b - Hull drain plug c - Rear lifting ring d - Motor plate e - Manufacturer's plate ...
-
Mercury Marine 898393001 - page 25
BOAT COMPONENTS 21 SIDE VIEW b c d e a 24448 a - Port air chamber valve b - Front air chamber valve c - Front lifting ring d - Starboard air chamber valve e - Oars Components Location ‑ Model 330 and 350 BACK VIEW a b 24450 a - Hull identification number (HIN) b - Hull drain plug ...
-
Mercury Marine 898393001 - page 26
BOAT COMPONENTS 22 FRONT VIEW a 24441 a - Front mooring ring TRANSOM VIEW a b c d b 24451 a - Drain plug b - Rear lifting ring c - Motor plate d - Manufacturer's plate ...
-
Mercury Marine 898393001 - page 27
BOAT COMPONENTS 23 SIDE VIEW a b e f 24452 c d a - Paddle location b - Port air chamber valve c - Front lifting rings (2) d - Front air chamber valve e - Storage compartment f - Starboard air chamber valve ...
-
Mercury Marine 898393001 - page 28
TRANSPORTING 24 Trailering Boat Use a trailer that will properly support the boat hull. Position the boat on the trailer so it will rest in a stable position on the trailer supports. The boat must be properly secured to the trailer. Secure the boat to the trailer using tie‑down straps. Tighten the straps down securely so they will prohibit boat m ...
-
Mercury Marine 898393001 - page 29
OPERATION 25 Inflation ! CAUTION Do not use a compressed air source to fill air chambers. Over inflation may result in damaged seams and or bulkheads. Seams and or bulkheads ruptured from over inflation, are not covered under the warranty. IMPORTANT: Do not inflate or deflate one air chamber at a time. When inflating or deflating, maintain a balanc ...
-
Mercury Marine 898393001 - page 30
OPERATION 26 NOTE: Always be aware of the air pressure in the air chambers. The air volume inside the air chambers will expand as the internal air temperature rises, this will cause the air pressure to fluctuate depending on water temperature and weather conditions. A boat that is correctly inflated, may experience a drop in air pressure and requir ...
-
Mercury Marine 898393001 - page 31
OPERATION 27 Empty the boat of all equipment. Make sure nobody is on‑board during lifting. 14774 Outboard Power Choose an outboard for the boat that is in accordance with the horsepower range and maximum weight limit. Refer to the Specification table in this manual or the manufacturer's plate on the boat for the maximum outboard horsepower a ...
-
Mercury Marine 898393001 - page 32
OPERATION 28 • Check the outboard for tightness on the transom. • Know the fuel capacity and cruising range. • Check that the lanyard stop switch for the outboard works correctly. • Be sure the boat is not overloaded. Do not exceed the maximum number of passengers or load capacity. Look at the boat capacity plate. • Be sure there is an ap ...
-
Mercury Marine 898393001 - page 33
OPERATION 29 Drain Valve Operation When underway, remove the drain plug from the drain and the water will automatically run out. The inner diaphragm will prevent water from returning. After the water has been drained, replace the drain plug. a b 24453 c a - Lock position b - Un‑lock position c - Drain plug Loading IMPORTANT: Do not exceed the max ...
-
Mercury Marine 898393001 - page 34
OPERATION 30 Towing If the inflatable boat is to be towed by another boat, the inflatable boat must be empty. Remove outboard, fuel tank and equipment. Attach a single towing line to the mooring ring on front of the hull and tow the boat at slow speed. 14776 Air Chamber Deflates Accidently If one of the air chambers should accidently deflate while ...
-
Mercury Marine 898393001 - page 35
MAINTENANCE 31 Cleaning Procedure FABRIC SURFACES Inflate the air chambers. Clean the fabric with a mild soap and fresh water solution. Rinse with fresh water and dry thoroughly. IMPORTANT: Do not use a vinyl preservative on the air chamber fabric. Chemicals in the preservatives may dry out the fabric. BOAT HULL Remove the plug to open the self bai ...
-
Mercury Marine 898393001 - page 36
MAINTENANCE 32 The repair kit which comes with the boat is a one part glue operation and should be used for emergency minor repair. For a permanent repair, a two part Hypalon glue should be used. This two part Hypalon glue and patching materials are available from Mercury Marine. Small tears and punctures in the air chambers which are 1 cm (0.393 i ...
-
Mercury Marine 898393001 - page 37
MAINTENANCE 33 Apply two thin layers of adhesive using a short bristle brush, in a circular pattern on both the backside of the patch and the patch area on the boat. Allow the first layer to dry completely (approximately 15 minutes) before applying the second layer. The second layer should dry until tacky, then apply the patch to the prepared area ...
-
Mercury Marine 898393001 - page 38
MAINTENANCE 34 For the best results when gluing, the relative humidity should be less than 60%, ambient air temperature should be between 18 °C to 25 °C (65 °F to 77 °F) and not in direct sunlight. Cut out a patch large enough to overlap the damaged area by 38 mm (1.5 in.) on all sides. Center the patch over the damaged area, and with a pencil ...
-
Mercury Marine 898393001 - page 39
STORAGE 35 Storage Preparation NOTE: The boat should be cleaned and rinsed with fresh water before being placed in long term storage. Refer to cleaning procedure. IMPORTANT: To prevent hull or fabric discoloration from marine growth or polluted waters, do not store the boat in water for extended periods of time. Clean the boat fabric and wash the b ...
-
Mercury Marine 898393001 - page 40
OWNERS SERVICE ASSISTANCE 36 Service Assistance Your satisfaction with your inflatable product is very important to your dealer and to us. If you ever have a problem, question or concern about your inflatable boat or outboard motor, contact your dealer or any authorized Mercury Marine dealership. If additional assistance is required, take these ste ...
У вас вопрос, касающийся Mercury Marine 898393001?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Mercury Marine 898393001, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Mercury Marine 898393001 со всей вероятностью он захочет поделиться методом ее решения.